Creating separation lines in the detail Section

Hi All,
I've got a database of 500 clients, and after listing out all the clients, i noticed it was difficult to follow the name across all the columns of information.
Is it possible to insert lines that span across the page after every entry?
Thank You,
Frank

Your best bet is to use alternating highlights to separate data.
Try this:
1. SECTION EXPERT for your details section
2. COLOR tab
3. Custom Formula (x-2) for background color.
4. enter formula without quotes "if recordnumber mod 2=0 then color (230,230,230) else nocolor"
Colors can be replaced with whatever colors you want (replace "color (230,230,230)" with color name (crYellow) or with another RGB color combination.
If you still prefer lines, you can try this:
1. Insert section below on your details section.
2. Add a line that spans the report.
3. Resize your new section accordingly to fit the line.

Similar Messages

Filling an array from a field in the details section

Hi.
I'm a Crystal newbie. I'm using Crystal 11 Dev. I have some basic understanding of programming but I am clueless as to the organization and syntax used in Crystal scripts.
Here's what I need to do. (I don't expect anyone to solve this for me, but just a starting point would be great.) I have a field in the details section, let's call it field-A. The details section is under group field, let's call it groupedField-A. For each groupedField-A there are zero to many field-A's which get looped through and displayed in the details section. Instead of just listing the values for field-A in the details section, I would like to display them in a string seperated by commas.
I figure I need to create an new array for each new groupedField-A, then add the values from field-A to the array as the details section loops through them. Then, I figure I concatenate the array values into a string in the details section or maybe the group header or footer.
Will this work in Crystal? If so, I need some help with the syntax. OR, is there another way to approach it?
Any ideas would be greatly appreciated.
Thanks
Chuck W.

hey Chuck,
instead of using an array you may wish to use a string running total. an array is limited to 1000 values whereas a string running total is 64k.
details section formula:
whileprintingrecords;
stringvar srt:= srt + + ",";
group header section formula for reset:
whileprintingrecords;
stringvar srt:= "";
group foot section formula for display:
whileprintingrecords;
stringvar srt;
srt[1 to length(srt) - 1]
hope this helps,
jw

12.1.3 BI Publisher report not displaying the detail section on first page

Hi,
As part of our R12.1.3 upgrade, I designed a Purchase Report as a RTF template.
Header and footer sections generate fine, but for some reason the detail (text body of the RTF template) does not display on the first page but starts on the second page (this is a PO with many lines). I am using MS Word table to display the detail section.
Is there something I can check?
Thanks,
Sinan

can you send me your template and xml . i can check at my side .
email:[email protected]
there may be some spaces in the beginning .

Fitting alot of fields in the details section [overflow]

Hi,
I am trying to create a simple report. I need to place 12 database fields on the report. These are going to go in the "details" section one beside the other. Unfortunately, I have run out of space in the details section and am left with 3 database fields not on the report. Is there a way in which i can fit these fields on the report?
thanks
J

Hi James,
You may increase the page size by going to File>>Page Setup and select landscape as orientation.
Another option is to connect to a plotter (printer) which is known to have wide page sizes
Thanks

How 2 creat report for displaying the details of a Delivery Document using

how to create report for displaying the details of a Delivery Document using the tables LIKP, LIPS
thank you
regards,
jagrut bharatkumar shukla
points will be rewarded

HI
I AM GIVING YOU MY DELIVERY DOCUMENT CODE...MODIFY IT ACCORDING TO YOUR REQUIREMENT
*& Report ZDELIVERY                                *
report zdelivery message-id z9bhu          .
types: begin of t_likp,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
*           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
*           WAERK TYPE LIKP-WAERK,      "Currency
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
       end of t_likp.
types: begin of t_lips,
           vbeln type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,
*           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
           vgbel type lips-vgbel,      "Doc no of the reference document
        end of t_lips.
types: begin of t_vbpa,
           vbeln type vbpa-vbeln,      "SD DocumenT Number
           posnr type vbpa-posnr,      "Item number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,      "Customer Number 1
       end of t_vbpa.
types: begin of t_kna1,
           kunnr type kna1-kunnr,      "Customer Number 1
           name1 type kna1-name1,      "Name 1
           ort01 type kna1-ort01,      "City
           adrnr type kna1-adrnr,      "Address
       end of t_kna1.
types: begin of t_li_vbpa,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
*           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
*           WAERK TYPE LIKP-WAERK,      "Currency
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
           vbeln1 type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,      "Net Price
*           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
           vgbel type lips-vgbel,      "Doc no of the reference document
           vbeln3 type vbpa-vbeln,     "SD DocumenT Number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,      "Customer Number 1
       end of t_li_vbpa.
types: begin of t_final,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
           vbeln1 type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,      "Net Price
           vgbel type lips-vgbel,      "Doc no of the reference document
           vbeln3 type vbpa-vbeln,     "SD DocumenT Number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,     "Customer Number 1
           name1 type kna1-name1,      "Name 1
           ort01 type kna1-ort01,      "City
           adrnr1 type kna1-adrnr,     "Address
           name2 type kna1-name1,      "Name 1
           ort02 type kna1-ort01,      "City
           adrnr2 type kna1-adrnr,     "Address
           name3 type kna1-name1,      "Name 1
           ort03 type kna1-ort01,      "City
           adrnr3 type kna1-adrnr,     "Address
       end of t_final.
*            D A T A D E C L A R A T I O N
*&*********Internal Table Declaration****************&*
data: it_likp type standard table of t_likp.
data: it_lips type standard table of t_lips.
data: it_vbpa type standard table of t_vbpa.
data: it_kna1 type standard table of t_kna1.
data: it_li_vbpa type standard table of t_li_vbpa.
data: it_li_vbpa_temp type standard table of t_li_vbpa.
data: it_final type standard table of t_final.
*&*********Work Area Declaration********************&*
data: wa_likp type t_likp.
data: wa_lips type t_lips.
data: wa_vbpa type t_vbpa.
data: wa_kna1 type t_kna1.
data: wa_li_vbpa type t_li_vbpa.
data: wa_li_vbpa_temp type t_li_vbpa.
data: wa_final type t_final.
*&*********Data Declaration************************&*
data: d_vbeln type likp-vbeln.
data: flag type i value 0.
*           S E L E C T I O N S C R E E N   D E C L A R A T I O N
selection-screen begin of block block2 with frame title text-001.
select-options: s_vbeln for d_vbeln obligatory.    "Delivery no
selection-screen end of block block2.
*            A T S E L E C T I O N - S C R E E N   E V E N T S
*AT SELECTION-SCREEN.
*PERFORM VALIDATE_DATA.
*            S T A R T   O F S E L E C T I O N     E V E N T S
start-of-selection.
perform fetch_data.
perform merge_data_kna1.
*INCLUDE Z9BT_SH_***4_FORMS.
call function 'OPEN_FORM'
exporting
*   APPLICATION                       = 'TX'
*   ARCHIVE_INDEX                     =
*   ARCHIVE_PARAMS                    =
    device                            = 'PRINTER'
*   DIALOG                            = 'X'
*   FORM                              = ' '
   language                          = sy-langu
*   OPTIONS                           =
*   MAIL_SENDER                       =
*   MAIL_RECIPIENT                    =
*   MAIL_APPL_OBJECT                  =
*   RAW_DATA_INTERFACE                = '*'
*   SPONUMIV                          =
* IMPORTING
*   LANGUAGE                          =
*   NEW_ARCHIVE_PARAMS                =
*   RESULT                            =
exceptions
   canceled                          = 1
   device                            = 2
   form                              = 3
   options                           = 4
   unclosed                          = 5
   mail_options                      = 6
   archive_error                     = 7
   invalid_fax_number                = 8
   more_params_needed_in_batch       = 9
   spool_error                       = 10
   codepage                          = 11
   others                            = 12
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
sort it_final by vbeln.
loop at it_final into wa_final.
call function 'START_FORM'
exporting
*   ARCHIVE_INDEX          =
   form                   = 'Z9BT_DELIVERY'
   language               = sy-langu
*   STARTPAGE              = ' '
*   PROGRAM                = ' '
*   MAIL_APPL_OBJECT       =
* IMPORTING
*   LANGUAGE               =
exceptions
   form                   = 1
   format                 = 2
   unended                = 3
   unopened               = 4
   unused                 = 5
   spool_error            = 6
   codepage               = 7
   others                 = 8
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'WRITE_FORM'
exporting
   element                        = 'ITEM_LIST'
   function                       = 'SET'
   type                           = 'BODY'
   window                         = 'MAIN'
* IMPORTING
*   PENDING_LINES                  =
* EXCEPTIONS
*   ELEMENT                        = 1
*   FUNCTION                       = 2
*   TYPE                           = 3
*   UNOPENED                       = 4
*   UNSTARTED                      = 5
*   WINDOW                         = 6
*   BAD_PAGEFORMAT_FOR_PRINT       = 7
*   SPOOL_ERROR                    = 8
*   CODEPAGE                       = 9
*   OTHERS                         = 10
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'END_FORM'
* IMPORTING
*   RESULT                         =
exceptions
   unopened                       = 1
   bad_pageformat_for_print       = 2
   spool_error                    = 3
   codepage                       = 4
   others                         = 5
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endloop.
call function 'CLOSE_FORM'
* IMPORTING
*   RESULT                         =
*   RDI_RESULT                     =
* TABLES
*   OTFDATA                        =
exceptions
   unopened                       = 1
   bad_pageformat_for_print       = 2
   send_error                     = 3
   spool_error                    = 4
   codepage                       = 5
   others                         = 6
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*&      Form VALIDATE_DATA
*       text
* --> p1        text
* <-- p2        text
form validate_data .
select single vbeln into wa_likp-vbeln
                    from likp where vbeln in s_vbeln.
append wa_likp to it_likp.
if sy-subrc <> 0.
flag = 1.
endif.
endform.                    " VALIDATE_DATA
*&      Form FETCH_DATA
*       text
* --> p1        text
* <-- p2        text
form fetch_data .
select a~vbeln
       a~erdat
       a~kunnr
       a~kunag
       a~traty
       b~vbeln
       b~posnr
       b~matnr
       b~arktx
       b~lfimg
       b~netpr
       b~vgbel
       c~vbeln
       c~parvw
       c~kunnr
         into table it_li_vbpa
                from likp as a
                left outer join lips as b on a~vbeln = b~vbeln
                inner join vbpa as c on b~vgbel = c~vbeln
                where a~vbeln in s_vbeln and
                c~parvw = 'RE'.
endform.                    " FETCH_DATA
*&      Form MERGE_DATA_KNA1
*       text
* --> p1        text
* <-- p2        text
form merge_data_kna1 .
if it_li_vbpa[] is not initial.
it_li_vbpa_temp[] = it_li_vbpa[].
sort it_li_vbpa_temp by kunnr.
delete adjacent duplicates from it_li_vbpa_temp comparing kunnr.
loop at it_li_vbpa into wa_li_vbpa.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunag.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunnrb.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
endloop.
endif.
if it_li_vbpa_temp[] is not initial.
select kunnr
        name1
        ort01
        adrnr into table it_kna1 from kna1
                    for all entries in it_li_vbpa_temp
                    where kunnr = it_li_vbpa_temp-kunnr.
endif.
loop at it_li_vbpa into wa_li_vbpa .
wa_final-vbeln = wa_li_vbpa-vbeln.
wa_final-erdat = wa_li_vbpa-erdat.
*it_final-LFART = it_li_vbpa-LFART.
wa_final-kunnr = wa_li_vbpa-kunnr.
wa_final-kunag = wa_li_vbpa-kunag.
*it_final-VSTEL = it_li_vbpa-VSTEL.
wa_final-traty = wa_li_vbpa-traty.
wa_final-vbeln1 = wa_li_vbpa-vbeln.
wa_final-posnr = wa_li_vbpa-posnr.
wa_final-matnr = wa_li_vbpa-matnr.
wa_final-arktx = wa_li_vbpa-arktx.
wa_final-lfimg = wa_li_vbpa-lfimg.
wa_final-netpr = wa_li_vbpa-netpr.
*wa_final-GEWEI = it_li_vbpa-GEWEI.
*it_final-VOLUM = it_li_vbpa-VOLUM.
*it_final-VOLEH = it_li_vbpa-VOLEH.
wa_final-vgbel = wa_li_vbpa-vgbel.
wa_final-vbeln3 = wa_li_vbpa-vbeln.
*wa_final-PARVW = wa_li_vbpa-PARVW.
wa_final-kunnrb = wa_li_vbpa-kunnrb.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnr.
if sy-subrc = 0.
wa_final-name1 = wa_kna1-name1.
wa_final-ort01 = wa_kna1-ort01.
wa_final-adrnr1 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunag.
if sy-subrc = 0.
wa_final-name2 = wa_kna1-name1.
wa_final-ort02 = wa_kna1-ort01.
wa_final-adrnr2 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnrb.
if sy-subrc = 0.
wa_final-name3 = wa_kna1-name1.
wa_final-ort03 = wa_kna1-ort01.
wa_final-adrnr3 = wa_kna1-adrnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
endform.

Master Detail Form - Update Statement for Column in the Detail Section

Hello,
I've posted a demo application to apex.oracle.com
Application# 49298
Application Name: Street_Inventory
Basically, on page 3 I have a Master Detail Form. In the Detail section, I want the value of On_hand to save to table ITEMS. Here's my code below.
SOURCE
select
"CONSUME_DETAIL"."CONSUME_DETAIL_ID",
"CONSUME_DETAIL"."CONSUME_HEADER_ID",
"CONSUME_DETAIL"."ITEM_ID",
"CONSUME_DETAIL"."CONSUMED_QUANTITY",
("ITEMS"."ON_HAND" - "CONSUME_DETAIL"."CONSUMED_QUANTITY") as "ON_HAND"
from "CONSUME_DETAIL",
"ITEMS"
where "CONSUME_HEADER_ID" = :P3_CONSUME_HEADER_ID
and "CONSUME_DETAIL"."ITEM_ID"="ITEMS"."ITEM_ID"
UPDATE INVENTORY PROCESS
UPDATE ITEMS
SET ON_HAND = :P3_ON_HAND - :P3_CONSUMED_QUANTITY
WHERE ITEM_ID = (select ITEM_ID
from CONSUME_DETAIL
where CONSUME_DETAIL_ID = :P3_CONSUME_DETAIL_ID);
My code isn't working. What am I doing wrong?

WReed,
The first thing I see "off the bat" is that you don't have items named P3_ON_HAND and P3_CONSUMED_QUANTITY which are referenced in your code. Although it's possible to do what you want with just SQL, I updated your code with a little PL/SQL to make it easier to understand...
As you'll see the problem now is that the design/db model is not quite right as your getting a too many rows error.
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen

How to force multiple columns in the Details section

Hello,
My report has a lot of data in the Details section, but it could fit on one page if I could put it in three columns. Is there a way to do this?
The Details section has setting: Force the new page after certain number of visible records. This would be perfect for me if instead of multiple pages I could use multiple columns.
Thank you,
Peter

Thank you.
I think I see now how to format the columns.
Peter
Edited by: Peter Afonin on Sep 10, 2010 2:34 PM

Adobe Reader highlight tool no longer filling text, just creating a line around the text

The Highlight tool in Adobe reader is no longer working as it used to. Instead of filling the text, as it used to, the tool just creates a line around the text. This makes the highlights much harder to spot.
I'm running Win 8 and using Adobe Reader XI version 11.0.09.
I've attached a screenshot to illustrate. The way the tool used to work, they way I want it to, is shown by all the highlighted text in the document. The way it currently works, is shown on the first line of text , where a portion of the text has been highlighted using the tool as it works now. I just creates a yellow line around the text.
I've checked the way the highlight settings are on both the old highlighted text and the new text and they appear identical. Both the colour and opacity percentage settings are the same.
Very frustrated. Any help appreciated.

Gilad D (try67) wrote:
Very strange. I'm not sure what the reason for this behaivour is, but try right-clicking one of the previous highlights and selecting "Make Current Properties Default". Then try to create a new highlight...
Did that. No effect.

Report - Centre a subreport in the detail section

Hi all
With my Access 2013 DB I do have a Report representing an invoice.
There is a subreport in the detail section representing the items, VAT plus Total amount.
I do have text elements in the footer sections.
I'm looking for the right event and vba code to centre the subreport within the detail section before it gets sent to the printer.
Thanks for any help.
Martin

The best way is position it yourself in design mode and leave it that way. There is the Move x,y fuction and you can also set the subreports left and top positions, but when you start fooling around with positioning objects in code, you are asking for trouble
if users change the report margins or other settings that are printer-dependent. As far as I know, there is no "Centering" ability in code, for form or report objects.

Why I can't set the Detail Section of a form at onLoad event?

Hi,
I'm having a silly problem with Access 2010. I can't modify the Detail section ("Corpo" in Italian) of a Form or a Report.
Neither using the onLoad nor the onOpen events.
What am I doing wrong? I load a micro example in my
one drive, if you would spend some time helping me.
Thanks in advance, Lauro

Hi,
I'm having a silly problem with Access 2010. I can't modify the Detail section ("Corpo" in Italian) of a Form or a Report.
Neither using the onLoad nor the onOpen events.
What am I doing wrong? I load a micro example in my
one drive, if you would spend some time helping me.
Thanks in advance, Lauro
You should be able to size the detail section of the Form in the open event or onload event.
I don't have 2010 on my PC. Why not post the sample code here?

Project Server - Projects does not show up in the detail section of the resource availability view!!!

Hi,
I click resource center in PWA 2010 and select a resource; then click resource assignments and a list of projects along with the task which the selected resource is assign is listed. I then click on resource availability and set the date
option and units for the selected resource and the resource availability and capacity is visible in the details section but not the list of projects that the resource is assign.
How can I get the list of projects to show up in the details section under the resource name?
A. Williams

Hi A. Williams,
Could you post a screenshot of BOTH upper (graph) and lower (detailed grid) parts of our resource availability page?
It would be very weird that you can see workload in the upper part but not in the detailed grid. This is what we need to know to help you:
Are you not seeing at all the assignments in both graph and detail grid of the resource availability page? In this case the issue comes from your assignment, not from the resource availability page.
Are you seeing the assignment in the graph but not in the detail grid?
In case this is an assignment issue, some reasons could be:
you're not looking at the right period
date range selection has not been applied clicking on the button "apply"
the assignments are proposed (versus committed)
the assignment has not been publish (column publish to "yes" in MS Project Pro)
the assignment owner is not the resource
Here is (sorry, it is in french) my upper part (graph) with 1 resource selected, 3 weeks and a 7hrs assignment on the 2nd week (note that you have to apply the date range once selected) :
Then the lower part (detailed grid) where is have exactly the same information (same assignments, same resources, same date range):
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

How to fix the height of the details section in crystal reports.

hi all
How to fix the height of the details section in crystal reports.

Thanks for your reply
i didnt get the clear idea about your answer can you explain it once with example
why iam asking is when i add a new details section according to you answer maintaining same height of the two details sections and i see the preview the iam getting gap between each record. this is so because one record from details section1 and another empty space from details section2
like
Details section A-contains records
Details section B- no records
Details section A-contains records
Details section B-no records
Then how will i solve my issue
Thanks in advance

Seperating the detail sections to start a new page

I'm using CR XI and I have the main report set up. I want to create a second section containing a seperate set of detail lines. When I insert the section below I now get detail a and detail b. When I do the preview the two sections are combined. I've added the subreport to detail b and tried to find some way to seperate them but nothing appears to say specificially how to do it.
I just want to have the two details sections seperated and start on seperate pages.
It's doing this:
customer id   customer name customer etc.
supplier id supplier name supplier etc.
customer id   customer name customer etc.
supplier id supplier name supplier etc.
I want it do this:
Main Report
customer id   customer name customer etc.
Sub Report
supplier id supplier name supplier etc.
thanks...

I'm afraid that didn't solve my issue. I already have information that needs to be in the footer.
And I'm looking at a report done by someone else and they have 3 seperate detail sections and each section starts on a seperate page, but I can't find what was done to make this happen. Unfortunately, that person is no longer available here.
My thinking is that there is a setting somewhere that will allow this type of seperation.

Summarization within the details section

Post Author: Todd Bailey
CA Forum: General
I need my report to summarized by a certain field called "asset group". Examples of this asset group are; Streets, Parks, etc.Other fields include: Total hours, Labor Cost and Equipment Cost Depending on the actual data, more than 1 record could be returned. For instance I have 5 rows of "Streets" returned because there were 5 instances of "streets" getting billed.How can i display one summarized row of each "Asset Group"? Thanks,Todd

Post Author: SKodidine
CA Forum: General
1. Create a group on 'Asset Group'.
2. Suppress Details Section.
3. Create Running Totals for each cost that will total for each record and then resets at the change of group. These are options while creating a running total.
4. Place the running totals in the group footer.

Creating Separation lines between rows of content

I have several hundreds pages from a catalog we are creating that need separation lines between columns to segragate the products. I am wondering if there is an easy way to automate the creation of these.
I tried using the Grid feature ( by drawing a frame and then using the left and up arrow keys to create the grids, but it creates a number of boxes where I need just separation lines.
I can create the seapration lines manually but this takes longer, even if I save them as a snippet and place multiple times.
I am using Indesign CS6
Please see the attached screen shot.
http://www.wdautoparts.com/pdf/page-12-without.pdf
With grids -
http://www.wdautoparts.com/pdf/page-12-with.pdf
Any suggestions for this noob would be greatly appreciated.
Thanks

Not sure whether this fits as a solution to your problem, but reading your post made me remember it:
http://www.indiscripts.com/post/2009/09/introducing-indesign-column-rules

Creating separation lines in the detail Section

Similar Messages

Maybe you are looking for