Creating single page PDF with only icon visible

I'm trying to create a single page PDF that, when attached to
email, will not show up as the single page itself, but only as the
Acrobat icon (until it is clicked on and opened). I realize if I
made the PDF two pages it would only show up as the icon. But is
there another way to make sure it stays looking like an attached
Acrobat icon rather than just appear as the single page PDF when
someone opens their email with the single page file attached?
Thanks in advance for your help!
EG

Thank you for your posting. These forums are specific to the
Acrobat.com website and it's set of hosted services, and do not
cover the Acrobat family of desktop products. Please visit the
following forums for any questions related to the Acrobat family of
desktop products:
http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/

Similar Messages

  • Creating single page pdfs from a brochure designed in spreads format

    Hi there,
    So I've been asked to take a brochure that is in spreads, and save each panel as a single page pdf. So basically, in document setup, the page size is 17.75 x 8.5).  There are four panels, each panel is roughly 4.3708 x 8.5. The problem is, each panel was not created as a single page in indesign...instead, it's set up as a 17.75 x 8.5 document and the panels are created within that document size.
    I guess I wanted to find out if there is an efficient way of creating these single panel pdfs from what I've been given.
    Anybody know?

    It's either copy/paste into a properly laid out facing pages document (the best choice if it will need editing in the future), or place the pages, each one twice, into a facing pages pages doc and crop the wrong half off each page. In either case, you'll need to rearrange the pages into readers' spreads.

  • Export single-page pdfs with page name

    I've been looking for a script that:
    - exports every page of an indesign file to a seperate single-page pdf (or other filetypes)
    - names the pdf with the name of a page -> this is the hard part to find
    The reason i could use it: i have a 200+ page file with productspecs. I would like to export every page with the correct productname. (extracting pdfs in acrobat is not a problem, but then i have to manually rename every file)
    I'm not sure how to name the pages, as it's not a function in indesign. Ideal would be to be able to "tell" indesign: this textframe = the pagename, so it wouldn't be necessary to label the page seperately.
    I'm not a scripter. I searched the forum and found some info on this already, but not a working script including automatic pagenaming.
    I did found an old post where someone points to such a script, but i can't find it:
    http://www.techplex.net/postsm40018_possible-to-name-pages.html#post40018
    Did anyone ever made/found/used such a script?
    (btw, a similar script for illustrator artboards would be very useful too!)
    Any help appreciated!

    scott zanelli made one years ago. does a fantastic job.
    http://indesignsecrets.com/page-exporter-utility-peu-5-script-updated-for-cs3.php
    Loic Aigon has written one...
    http://www.loicaigon.com/blog/?p=876
    as for illustrator artboards... don't know - have a look on the illustrator scripting forum.

  • Create multi-page PDF with photoshop CS3

    Hi,
    I have created 8 A4-sized PSD documents in Photoshop CS3 and I would like to create a single PDF document with 8 pages.
    Is there an easy way to do this?
    I would really appreciate any help that people can offer, as I am stumped!
    Thank you in advance,

    FILE> Automate PDF presentation
    add open files or point it to your folder of files
    after you hit save will be a dialog box to choose options
    make sure to make the proper selections for quality, based on your purpose
    a PDF made for commercial printing will be large
    If you want to put it on internet or email you need to select the setttings
    for web based doc
    OR you could open acrobat and create a multipage document
    I think the default is 8.5x11
    (not sure) but if you have unusual size paper
    make sure to change the page layout to that

  • In the mail app why can't I see single page pdf attachment created by SSRS R2 on iPad with iOS 8?

    We have reports that are generated using Sql Server Reporting Services 2008 R2 and are distributed to users by email as a PDF attachment.  This worked fine in iOS 7 but ever since users have updated to iOS 8 the single page PDF is missing even though it has the paper clip icon indicating there is an attachment with the email.  If the PDF is multiple pages then the PDF icon would appear but there seems to be a problem with the single page pdf that is embedded on the mail app in iOS 8.
    We've recreated this issue creating a test report and sent it to iPads that have iOS 7, iOS 8 using different models of iPads (2, 3, 4) and the ones that have iOS 7 work fine.  Only the ones that have iOS 8 have this issue.  Also tried changing the format of the file to a PNG, TIFF and again the same results on the iPads with iOS 7 display it correctly.  Another test we did was send the PDF to our personal email and open it on our home iPads we were not able to see the single page PDF on iOS 8.  Looking at the headers of the email I can see the that the Content-Type is multipart/mixed.  When the original is forwarded to oneself on the iPad the attachment is included but the Content-Type is application/ms-tnef.

    Can you check your email headers, I have also noticed this for reports that are generated using Sql Server Reporting Services 2008 R2. It could to be due to the Content-ID header I believe.
    As a single page attachment on iPad will try and display inline, the Content_ID header is possibly affecting this and showing a small blank square as the image instead. Although this isn't defined as inline within the Content-Disposition header and will appear as an attachment on Outlook.

  • Is it possible to create a tagged pdf with apple pages?

    Not sure if possible and any tutorials would be appreciated.

    > Is it possible to create a tagged PDF with Apple Pages?
    Short answer: No, Apple chose at the introduction of Mac OS X to support only Adobe PDF 1.3 and those parts of Adobe PDF 1.4 that include device-independent transparency, but not those parts of Adobe PDF 1.4 that include Adobe XMP for XML markup of the page description program.
    Long answer: Adobe PostScript is a page description programming language, unlike Xerox Interpress which is a page and document description programming language. In other words, Adobe PostScript is a streaming or sequential rendering model that cannot simulate the behaviour of a bound book where the user can turn from any one page to any other page arbitrarily. Adobe introduced Acrobat Distiller in 1993 in order to convert Adobe PostScript page description programs into Adobe PDF page and document description programs that share the same fundamental functionality as Xerox Interpress.
    Conversion from Adobe PostScript to Adobe PDF buys one nothing but page-independent processing. Specifications published by Adobe in 1993 state how the SFNT Spline Font file format used by Apple and Microsoft for Unicode imaging has to be re-encoded into PostScript font program dictionary format (PostScript so-called simple fonts with less than 256 glyphs and PostScript so-called complex fonts (CID fonts) which are simple fonts tiled into a single superfont). All that is left is the glyph identifiers, and per Unicode Specification version 1.0 the glyph identifiers are private and font-dependent, so no character information can be inferred.
    ISO 19005:2005 PDF/A is a superset of ISO 15930:2002 PDF/X-3. The problem with ISO 15930:2002 PDF/X-3 is the same as above, that is, Adobe PostScript cannot encode the file format of the International Color Consortium, which has to be re-encoded to PostScript CSA Color Space Arrays and PostScript CRD Color Rendering Dictionaries. It is possible to encode the ICC file format directly in PDF 1.3 and higher, as specified in ISO 15930 and ISO 19005, but because PDF encodes only the glyph identifiers that are the output of the SFNT file format, and not the UCS Universal Character Set input and the settings for the feature selectors in the font file, ISO 19005:2005 has come under criticism for failing to support search in complex scripts.
    ISO 19005:2011 is supposed to address the shortcomings by saving the UCS input into the PDF itself, but in this case it is impossible to use Adobe PostScript and Adobe Acrobat Distiller as intermediates to Adobe PDF. So in order to drive ISO 19005:2011 Adobe would have to ditch Adobe Acrobat. I am not sure if there is software that implements ISO 19005:2011, but I noted that the Apple iBook Store does not accept PDF at all. Personally, I struggle to think of how to explain to endusers the overwhelming number of Adobe ISO PDF formats (there is PDF/E, PDF/UA and whatever else), and the overwhelming number of Adobe ISO PDF versions of these formats (there is ISO 19005:2005, ISO 19005:2011, ISO 15930 all the way back to 1999/2000 in God knows how many versions at this point).
    Best wishes,
    Henrik Holmegaard
    would-be technical writer

  • Exporting a multipage InDesign document to single page PDFs but with unique filenames using scripts

    Hi,
    I'm using InDesign 5.5.
    My goal is to export a multipage InDesign file into single page PDFs but each single PDF must be uniquely named.
    For example;
    InDesignFileName_487275123.00.pdf
    InDesignFileName_734876882.00.pdf
    ...and so on.
    I've spent a great deal of time searching online and the closest I have found is  software called Output Factory which works fine.
    The way Output Factory works is by placing a script label within a textframe on the master page in InDesign. Then whatever is typed into the text frame on each the separate pages defines the file name of each separate page.
    However if I can solve this problem without any investment costs my boss will be very happy
    I found PEU5 which works great for exporting into single pages, it's now a case of naming each single PDF but I know nothing how about to create a script but I get the gist of what they do. My understanding is that a script could solve the second half of my problem.
    Can anyone help?
    Thanks.
    S

    Thanks Peter but but I don't think this is what I'm looking for.
    I did find this post http://forums.adobe.com/thread/841982 but I can't seem to get the script to work.
    This is the error message I get when I run the script... any ideas what I'm doing wrong?

  • Combining Contents of 2 PDFs into a single page PDF

    I need to combine elements of two different PDFs into one, single page PDF.   
    One PDF is Template of sorts with headers to be edited, the other PDF is a non-ocr scan that includes text and images.   
    I've found no way to copy and paste on a single page b.t two PDFs. I've tried pasting into an inserted page and then dragging it up or cutting and pasting within the document (with the intention of deleting the unneeded second page) with no luck.
    This seems like it should be such a no brainer. Open 1st PDF, Open 2nd PDF, make selection Ctrl C, go to 1st PDF, place cursor where desired, Ctrl V.   But it doesn't work at all in an intuitive way like any other document program where you can cut and paste with ease b/t documents and even b/t programs.
    So instead, I've copied the part of the image PDF I want into the original word doc of the template, then created a PDF from that.  However, when I try to tell Acrobat to make the entire document OCR, it tells me it can’t b/c it contains renderable text (the header information, I’m assuming).  If I run the OCR on a PDF containing just the image, it does it no problem.   
    What is the best way to bring these two documents together in way that results in a single page, completely searchable PDF? 

    Unfortunately, another $700 software purchase is not in the cards and I can’t wrap my mind around why it should be necessary.  It seems so nonsensical to me that Acrobat has all these advanced functions for editing, combining, making portfolios etc., yet can not perform the simple task of cutting and pasting between two documents.
    While Adobe support was putting me on hold, I doodled up some generic sample documents that I could upload here to illustrate the problem. Hopefully, someone can play with these and give me a workable solution.
    The first PDF, Original Acme Clip, represents the file that is provided to me by our clipping service. They cut the item out of a magazine, put the customized info into their standard template in whatever word processing program they use, printed it out, pasted the magazine clip to that page and then scanned the hard copy to PDF-as an image only PDF, it is not optimized for optical character recognition and is not searchable.
    The second PDF, Final Acme PDF, represents the file that our workflow eventually ends up as-a PDF containing only the info we want, formatted as we want, in which both the headers and clip content are searchable. To get there currently, we print out the Original ACME Clip, type the relevant info into the headers of a Word template that includes our logo and standard footer, print out the Word template page, manually cut out the scanned image from the PDF, and paste it onto the template paper.  The resulting paper is scanned into the Final Acme PDF and OCR is run on the whole thing to make it all searchable.
    What we’d like to do is skip all the printing, and manual cutting and pasting. Any and all suggestions for work in Acrobat 9 Pro to do this would be gratefully appreciated!

  • Need script to place multiple single page pdfs in ID pages

    Does anyone know of a script that would place a whole folder full of single page pdf files into an indesign document one per page, alphabetically by pdf file name, and ideally add new pages as needed. The last part is optional, as the ID document could already have the required number of pages, all using the same master page with the the picture frame already in place.
    In my current project, the pdfs are all the same size as the ID document page size.
    This would be along the lines of the scripts that place multipage pdfs, but for single page ones. I have tried first creating a multipage pdf by inserting a folder full of single page pdfs at the end of an initial pdf. Acrobat 8 pro does this very well indeed, but selects the pages from the source folder in random order. I need them in alphabetical order.
    Thanks for any insight,
    Al

    For this project I could equally well use a script that would place or re link to a new pdf in a single page ID document, print device independent postscript with some sort of unique or sequential filename, and repeat the process for a whole folder of source pdf files. No new pages need to be added, and the new pdf could replace the prior one.
    What I am after is a device independent ps file for these pdf files. The ones produced by batch processing from Acrobat 8 Pro do not offer enough control, as in that method I would need *only* the black separation.
    Thanks,
    Al

  • AS) export single page PDFs from multi-artboards

    I'm not exactly sure where my new problem lies. I'm trying to save out single page PDFs from an Illustrator CS4 document with multiple artboards. Each artboard should become a PDF. I can get a multi page PDF, but when it saves single page files, I get white PDFs with error messages on them (I think it is saving .ai files with a .pdf extension).
    this is where I am now (simplified, of course):
    tell application "Adobe Illustrator"
    set docName to name of current document
    set itemNumber to 1
    tell application "Finder" to set fileLoc to path to desktop as string
    set pageCount to (count artboards in document docName)
    tell current document
    set allPlacedItems to placed items
    repeat with h from 1 to (count of allPlacedItems)
    set thisPlacedItem to item h of allPlacedItems
    tell thisPlacedItem to embed
    end repeat
    set allTextItems to text frames
    repeat with j from 1 to (count of allTextItems)
    set thisTextItem to item j of allTextItems
    tell thisTextItem to convert to paths
    end repeat
    end tell
    repeat with i from 1 to pageCount
    set pdfSaveOptions to {class:PDF save options, pdfXstandard:PDFX None, compatibility:Acrobat 6, preserve editability:false, generate thumbnails:false, optimization:false, acrobat layers:false, artboard range:i, view pdf:false, color downsampling:0, color resample:nodownsample, color compression:none, grayscale downsampling:0, grayscale resample:nodownsample, grayscale compression:none, monochrome downsampling:0, monochrome resample:nodownsample, monochrome compression:none, compress art:false, trim marks:false, registration marks:false, color bars:false, page info:false, page marks style:Roman, trim mark weight:trimmarkweight025, offset:6.0, bleed link:true, bleed offset:{0, 0, 0, 0}, color conversion id:none, color destination id:none, color profile id:include all profiles, trapped:false, font subset threshold:50.0}
    set pdfName to docName & "TEST" & itemNumber & ".pdf"
    set destFile to (fileLoc & pdfName) as string
    save document 1 in file destFile as pdf with options pdfSaveOptions
    set itemNumber to (itemNumber + 1)
    end repeat
    close current document without saving
    end tell

    // Save the artboards to PDF.
    var myDoc = app.activeDocument;
    var original_filename = myDoc.name.toString();
    // alert (myDoc.name.toString() )
    // Get the folder location
    var destFolder = Folder.selectDialog('Select the folder to save the PDF files to:');
    // Get the number of artboards to export from a dialogue
    var total =  myDoc.artboards.length
    //     Number.selectDialogue('Total Number of Files to be made')
    if (destFolder) {
         for (i=0; i<total; i++)
              var destFile = new File(destFolder+original_filename+"_"+i);          //     Assign incrementing filenames
              var pdfSaveOptions = new PDFSaveOptions();
              pdfSaveOptions.viewAfterSaving = false;          //     Don't want to see these fles in Reader
              pdfSaveOptions.SaveMultipleArtboards = true;
              var range = new String();
              range = (i+1).toString();
              pdfSaveOptions.artboardRange= range;     //     not Assign incrementing page range
              myDoc.saveAs (destFile,  pdfSaveOptions);     
    I've run this script on the 3 art board document the Adobe sample scripts create. It's a just different coloured star on each artboard.
    This script appears to work in as far as I get 3 files with just one artboard showing when I open the files in Adobe Reader. Problem is when I open them in AI, I can see all the artwork is still there and even more stranger is the fact that the numbers are still 1,2,3 whereas in Reader it's just page i showing as page 1 each time.
    This could be a problem when the application I'm writing generates an image structure from the files if it sticks the excess data onto the GPU (not sure if it will or not). If it includes all the data, also it just makes the Application footprint bigger by a 8 MB or so of unnecessary baggage. An issue for a 'light weight' app.
    I noticed the export ExportArtboardsPhotoshop.jsx script has this line:
    psdExportOptions.saveMultipleArtboards = true;
    It works in that context but in PDF context it only works in terms of what Reader shows not what exists in the files. Good one Adobe… Makes me wonder what the Multiple art boards method did before AI had multiple art boards. How was AI dividing the objects?!
    Also I really need a SaveAsCopy (non-existent I think) method or I'll have to keep reopening the original file and then doing SaveAs.
    Back to manual duplicating files in finder, batch renaming, opening them all and deleting excess. Or export to PSD and get my dimensions right or just oversized (I can always down sample in the app)…
    This is truly a painful exercise!

  • When inserting a single page pdf into another pdf, some of the text disappears

    Currently working on a fairly big pdf. Have a single pdf which opens up fine. What i am trying to do is insert this single page pdf into the larger document. When it is inserted, not all the characters are being displayed like b, v, u etc. If I highlight the areas that have the text missing and choose copy, and paste it into word, all the text is there. Its just not actually showing in the final pdf. What has got me, is that if I open the single page pdf by itself, it opens up fine. Parts of the text only disappear when it is inserted into the larger pdf document. Any thoughts as it has me stumped!!!

    Does the Visio PDF look correct in Acrobat? You might try to save the VISIO file as an EMF file or other vector graphic and create a PDF from there. VISIO has had major problems in the past and that may be associated with your problem.
    Just for the heck of it, have you tried the reverse insertion? Try inserting the longer PDF into the single page one and then move the page to where you want it with the pages view.
    Excuse my mood, but I am real tempted at this time of the evening to simply say your error was in using VISIO. Like I said, sorry.

  • Place Single Page PDF Multi Times into a template

    Say for instance I have a Business Card 90 x 55 which needs to be placed on a 8up layout template ready for printing.
    How do I tell Indesign to place the single page PDF 8 times.
    Or maybe this way: Is there a way of telling Indesign to export a single page 8 times to the same pdf file. Size is not an issue for the PDF as it is only a tempary file.

    I have set up a template with Place holders for the pdf to be placed in, then to place the pdf all i have to do is click inside each of the place holders and wala they are there.
    So on my 8up template i have all my required items ie: colour bars, crop marks, and guides all on their own layers, and the 8 boxes on their own layer, I import the PDF loading my curser, click on a box and artwork is placed exactly where I need it to be.
    You are right about step and repeat being one way of doing this, but I think my way if I can work it out will be even faster, no mesurements to remember no typing just 8 quick clicks.
    If by any chance I need more then 8 up adding a page is no problems the boxes are on the master page and I just release the objects on the artwork layer and its ready to go again as many times as I need it.
    What do you think of the idea to Print to PDF is this a lower quality way of making the PDF.

  • How do I prevent single-page PDFs from appearing inline in the email body?

    When someone sends me a multiple page PDF, the email contains an attachment icon.  When I click on the icon, the PDF is opened full-screen.  When I click on the screen, icons appear including a box with an arrow pointing up.  Clicking on this icon, lets me send the PDF to other applications such as iBooks. 
    When someone sends me a single-page PDF, the PDF is displayed inline in the body of the email and I do not see a way to send the PDF to other applications.  Is there a way to view the PDF full-screen and thus send the document to other applications?
    I have the new iPad (v3) running iOS 7. 

    What you are experience is totally normal and the expected behavior for a single page PDF as an attachment in an email. You can easily save it to another app by simply tapping and holding down on the open PDF and the Open In window will pop up. It may take a little practice but it does work. Just tap and hold down on the open PDF.

  • Create continuous page PDF from webpage.

    Hello, I am using Adobe Acrobat X Pro and MS Internet Explorer (FireFox is available), and I would like to create continuous page PDF files from webpages. I am taking webpage data, and making it accessible on an intranet for viewing by our technicians, and creating the PDF with standard pages is making a mess of the data. I have resorted to creating a custom sized page (ie: 8.5" x 153") for each webpage to get everything on one continuous flow. I am hoping someone can tell me a more streamlined method to do this as my current method is very time consuming.

    There are plugins available for many browsers that can produce a single
    image from an entire web page. You can then easily convert that image into
    a single-page PDF file.

  • Import XML into Single Page PDF Form - Form Repeats

    I have a created a PDF form in Acrobat, which is a single page that has about 16 text fields to be filled in. The data I am importing is in an XML format. I am able to import the data for a single page with no trouble. I would like to be able to import multiple pages of data and have the form repeat with the corresponding additional data.
    For example,
    - I have a "grid report" that is 3 rows and 16 columns. Each row of data represents a separate page. The data is converted to XML format and saved as a single file (see below sample).
    - I have a single page PDF Form with text 16 fields. The text fields correspond to the column data from the "grid report"
    - (Desired) After importing the XML data into the single page PDF form, I would like to have a file that has 3 pages. Each page is a replicate of the original form.
              - The data contained in the 16 fields of page 1 reflect the data from Row1 of the "grid report"
              - The data contained in the 16 fields of page 2 reflect the data from Row2 of the "grid report"
              - The data contained in the 16 fields of page 3 reflect the data from Row3 of the "grid report"
    I am not sure if I need to change the format of my XML, or if there is a way to add a tag of some kind at the end of the PDF From that indicates the (blank) form should repeat for each <Row> of data.
    I am open to other reporting/form applications, but I am having a hard time finding anything online that indicates this specific functionality. I would think that this is a pretty standard process, but I am having quite the time finding a solution. Any help is GREATLY appreciated!
    <?xml version="1.0" encoding="utf-16"?>
    <Data>
      <Row>
        <BOL>82862AK</BOL>
        <Movement_Date>7/10/2014</Movement_Date>
        <Exporter_Addr_1>1568 Washburn Avenue</Exporter_Addr_1>
        <NetWeight>191,016.4580</NetWeight>
        <NetVolume>29,079.0000</NetVolume>
        <SpecificGravity>0.7879</SpecificGravity>
        <APIGravity>48.0913</APIGravity>
        <Energy>81.5100</Energy>
        <Chemical>ETHD</Chemical>
        <MovementLocation>Cherokee, IA</MovementLocation>
        <DestinationLocation>Toronto,ON</DestinationLocation>
        <Date>7/10/2014</Date>
        <City>Cherokee</City>
        <State>IA</State>
        <ZipCode>51012</ZipCode>
        <Name>Processors</Name>
      </Row>
      <Row>
        <BOL>82862AL</BOL>
        <Movement_Date>7/10/2014</Movement_Date>
        <Exporter_Addr_1>1568 Washburn Avenue</Exporter_Addr_1>
        <NetWeight>190,497.5165</NetWeight>
        <NetVolume>29,000.0000</NetVolume>
        <SpecificGravity>0.7879</SpecificGravity>
        <APIGravity>48.0913</APIGravity>
        <Energy>81.5100</Energy>
        <Chemical>ETHD</Chemical>
        <MovementLocation>Cherokee, IA</MovementLocation>
        <DestinationLocation>Toronto,ON</DestinationLocation>
        <Date>7/10/2014</Date>
        <City>Cherokee</City>
        <State>IA</State>
        <ZipCode>51012</ZipCode>
        <Name>Processors</Name>
      </Row>
      <Row>
        <BOL>82862AM</BOL>
        <Movement_Date>7/10/2014</Movement_Date>
        <Exporter_Addr_1>1568 Washburn Avenue</Exporter_Addr_1>
        <NetWeight>190,497.5165</NetWeight>
        <NetVolume>29,000.0000</NetVolume>
        <SpecificGravity>0.7879</SpecificGravity>
        <APIGravity>48.0913</APIGravity>
        <Energy>81.5100</Energy>
        <Chemical>ETHD</Chemical>
        <MovementLocation>Cherokee, IA</MovementLocation>
        <DestinationLocation>Toronto,ON</DestinationLocation>
        <Date>7/10/2014</Date>
        <City>Cherokee</City>
        <State>IA</State>
        <ZipCode>51012</ZipCode>
        <Name>Processors</Name>
      </Row>
    </Data>

    Hi there,
    Your discussion was moved to the Acrobat Forms forum: the folks here should be well suited to answer your question.
    Best,
    Sara

Maybe you are looking for

  • How can I transfer music from my ipod to a blank cd?

    I downloaded music from my computer at work in to my ipod and now I want to transfer it to a blank CD but don't know how? Will someone please enlighten me. Thank you in advance for your help.

  • "could not find this item"

    I have a snow server resharing a folder on an xsan volume via AFP and SMB. Windows 7 clients trying to copy files from the share are getting the error "could not find this item" "This is no longer located in... Verify the item's location and try agai

  • Application keeps moving out of the window to a phantom screen?

    I can start the application and it works fine. However it won't stay on my home screen and I have checked the other spaces and it won't stay there either. It keeps drifting off to the top and off the screen. Any ideas?

  • JSP multiple form question

    Hi I have to create a multiple page user input form, i was wondering if there was a way to set the target to a div tag when submitting the form, so that it looks like the way an ajax application. Cannot use ajax cause i am getting javascript unknown

  • Tracker-extract spam in system log

    Hi, I recently moved from Ubuntu to Arch. On both distribution I use Gnome 3. I took my home directory from Ubuntu to Arch. Now I get a couple of Gnome warnings and errors in my system log, especially from the tracker-extract. For every file, which w