Creating spool file for Mass printing of smartforms

Hi all
My requirement is Mass printing of Development Plans,
In this case is i need to select all the smartforms depending upon the selection screen data.& i need to pass all the smartforms to newly created spool file..
how should I use TSP01 & Function Module 'GET_PRINT_PARAMETERS' for this smartform spool.
so can any body explain me in detail..
How to create spool ID, ?
how to create spool file in this case..??
How to pass smartform data to that new spool file../??
Any sample codes for this./??
Thanx in advance,
Regards,
Kalam A.

Check the links -
Re: How to create a spool?
How to create a spool request
Regards,
Amit
Reward all helpful replies.

Similar Messages

Spool file for Mass printing of smartforms

Hi all..
My requirement is as follows...
Once the selected population is established, the new program would select all those Development Plans and <b>create a spool file</b> of all the printable formats (using the same smartform as the individual form print). This spool file would then print to the printer selected by the user on the selection screen. This would need to be run in the background, as it is expected it would have a long run time.
can any body tel me clearly how to approach this requirement,
any sample code for spool file creation in this case../??
Regards,
Kalam A.

Hi all..
My requirement is as follows...
Once the selected population is established, the new program would select all those Development Plans and <b>create a spool file</b> of all the printable formats (using the same smartform as the individual form print). This spool file would then print to the printer selected by the user on the selection screen. This would need to be run in the background, as it is expected it would have a long run time.
can any body tel me clearly how to approach this requirement,
any sample code for spool file creation in this case../??
Regards,
Kalam A.

Creating InDesign files for both print and mobile output?

I am looking for a way to create files that can be multi-purpose for both print and mobile/online environments. I would like the output to be 2 different PDFs from one set of Indesign files. The problem I am encountering is that currently my files are full of hi-res and vector graphics, effects, and are generally created to be optimized for large-scale printings on offset or digital presses. I am trying to use the same files to generate files that are optimized for mobile and online presentation but finding that the number of vector graphics specifically is slowing page display down.
My initial reaction is that the solution would have to be dual-development. Multiple forms of 'master graphics' would have to be created and placed on multiple layers (one for print and one for mobile/online).
Hi-res files could be made lo-res in Acrobat or Pitstop, but vector imagery would have to be rasterized and I am not aware of a method to do that in either of those programs.
I have found some info on adobe.com leading me to think that maybe CS6 addresses some of this, but the majority of my work is being done in CS4 with only the bleeding edge being done in CS5.
Thanks in advance for any insight.

the output to be 2 different PDFs from one set of Indesign files.
You can accomplish this by saving each PDF using a different preset - High Quality Print for the high res, smallest file size for web
but vector imagery would have to be rasterized...
You should be trying to keep all vector work as vectors. This, in most cases, lowers the file size. There are a couple of exceptions to that like if the vectors are very complex (layered etc) and you are using bitmap effects like drop shadows. In general, rasterizing will increase the file size and lower the quality.
Is there any functional difference between the 2 PDFs? I am wondering why exporting using 2 different presets will not do the job efficiently enough. You could always save your linked images with a low res version - same file but make a copy 100dpi instead of 300dpi. This might help but InD normally downsamples the images anyway when exporting as smallest file size.
EDIT:// In Acrobat, you can save as "Reduced Size PDF" which strips out all the meta data etc and makes the PDF lighter and faster for web use. This would be a final, before publishing online step.

Programmatically creating postscript files for office documents

Hi All
I am in the process of experimenting with vb.net to open up a word document in the background and create a postscript file, which i would then use to create a pdf. This currently is a windows service and seems to run ok when the same code runs through a windows form application.
The problem i am having is with the "When creating a postscript file you have to sent the host fonts" error message, which seems to be fairly common judging by numerous articles on various forums. However, none of the solutions seem to solve my problem.
I have set the "Do Not Send Fonts To Adobe PDF" option to OFF on printer defaults, on the current printer setup and even on the printer settings for that application (go to print, properties etc from within Word).
However, whenever i run the code i get the error message. I then made the instance of word visible and checked the application settings for the adobe pdf printer.... the "Do Not Send Fonts To Adobe PDF" is now ticked. But when i close this down, and open word as a normal user would and check the setting it is off! Why would this be?
Can i programmatically change this setting when word opens and before i run the post script file creation code? Where is this value for the setting stored? I do not understand why this is resetting in the instance of word through code? Is it something to do with setting the active printer and at this point using the default setting?
Any help would be appreciated.
Thanks in advance
Nic

You say you are doing this as Windows service – does this mean you are running this on a server of some sort? If so, that is NOT ALLOWED.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Wed, 26 Oct 2011 04:31:13 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Programmatically creating postscript files for office documents
Programmatically creating postscript files for office documents
created by nic.eastham<http://forums.adobe.com/people/nic.eastham> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3990878#3990878

Can't create spool file

Hi,
I've problems in creating spool file. I've some PL-SQL scripts, running monthly with sqlplus on Windows 2000, that have always generated spool file using the statements "spool filename.log".
Two days ago, I run this scripts and I noticed that they didn't create the log file, but nothing has been changed.
I noticed that changing the script with "spool c:\filename.log" the spool file is correctly generated.
I run the script using sqlplus user/pwd@db @c:\script.sql and in the body of the script there is:
whenever oserror exit SQL.OSCODE rollback
whenever sqlerror exit SQL.SQLCODE rollback
spool faXXXXX_X.log
Set autocommit off timing on echo on feedback on termout on serveroutput on
set escape ^
DECLARE
Why "spool filename.log" suddenly stop to work? There is some enviroment variable who determine the default directory of spooled file?

My PATH variable has a lot of directories, some of them are "C:\oracle\ora81\bin;C:\Program Files\Oracle\jre\1.1.7\bin;C:\oracle\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\orant\bin;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;"
I make a "search" for the spooled file in all the directories of the hard disk; the problem is that the spooled file has not been created but the SQL script terminated succesfully. What's the possible reason?

I am getting error while creating Control file for a fla file upoad in HANA

Hi Experts,
I am getting the following error when I try to create crtrol file for a flat file extraction in SAP HANA.
Could not execute 'import data into table P935718."COPATBL" from 'COPATBL.csv' record delimited by '\n' fields ...'
SAP DBTech JDBC: [257] (at 14): sql syntax error: incorrect syntax near "into": line 2 col 1 (at pos 14)
Here is the code I have used to create control file after I creating the table.
import data
into table P935718."COPATBL"
from 'COPATBL.csv'
    record delimited by '\n'
    fields delimited by ','
    optionally enclosed by '"'
error log 'P935718.COPATBL.err'
p935718 is my user ID, COPATBL is my table created, COPABL.CSV is a flat file.
Please help me in this regard.
Thanks,
Guna

Hello,
guessing from the error message it looks that you are trying to execute "import data" as SQL command.
Please note that import data is NOT SQL command but it is syntax for control file. You need to create file with this syntax on server and then use command: IMPORT FROM '/<path>/<filename>.ctl'
In a shortcut:
1.- create comma separated CSV file with your data - <source cvs>.csv
2.- upload CVS file to HANA server
3.- create the control file <filename>.ctl:
import data
into table <schema>."<table name>"
from '<source cvs>.csv'
record delimited by '
fields delimited by ','
optionally enclosed by '"'
error log '<file name>.err'
4.- execute command:
IMPORT FROM '/<path>/<filename>.ctl'
Please check following threads:
How to load CSV files into HANA
Will HANA supports Bulkload
Tomas

I have Adobe Photoshop Elements 10 plus I create PDF files for work some are scan pdf docs. When I install Photoshop Elements 10 it DOES convert all the PDF files to Photoshop Elements-10 Docs. it even changes and shows the PSE-10 Icon. So I am alway inst

I have Adobe Photoshop Elements 10 plus I create PDF files for work some are scan pdf docs. When I install Photoshop Elements 10 it DOES convert all the PDF files to Photoshop Elements-10 Docs. it even changes and shows the PSE-10 Icon. So I am alway installing PSE-10 or uninstalling it. If I send the PDF file that has been automatically converted to a PSE-10 the person I send the file to can not open it because they do not have PSE-10. What can I do to stop PSE-10 from converting my PDF files? Don't tell me to upgrade PSE-10 I tried their on-line program and it is too advance for a hobby photographer like myself and their Help Desk is impossible to reach.

Hi,
Can you please share the logs?
You can use the Adobe Log Collector tool (Log Collector Tool) and share the corresponding zip file @ [email protected]
Thanks,
Shikha

Creating setup file for java

Somebody tell me how to create setup file for the software which is made by using java programming. We can create jar file for that purpose but I want to create setup file or exe file.

open source
- izpack (windows, linux, macos) www.izforge.com or org
- nsis.sf.net (winblows only)
commercial
- www.zerog.com 's InstallAnywhere

Can i create different file for my movies

I need to create diferent file for movies, but i don't know how to do it

i want to creat like a play list but for movies, can i do that

Creating UNIX file for RFBIBL00

Hi All,
I am creating the file for the RFBIBL00 program to use.
I am filling in structures
BGR00 - SESSION
BBKPF - HEADER
BBSEG - DOCUMENT
so in my I am planning for my file to contain
1 session rec
1 header rec
multiple document recs
is there any specific way to format the file? like spacing between variables? I see that the "/" is used for special chars.
I am just wondering what is the correct way to setup this file so the RFBIBL00 will process it?
thanks
Keith

here is the documentation on the strucures:
<< Please do not post copyrighted material here >>
Edited by: Rob Burbank on Jun 19, 2009 2:15 PM

How to create xpi file for my own extension?

I have created my own extension and directly added profile extension folder in my system.its working fine. but while installing extension using .xpi file its produce error "Install script not found
-204".Please explian me how to create .xpi file for my extension folder.
I hope you can help this issues.
Thanks in advance.
Regards
vasanthi

See this:
https://developer.mozilla.org/en/Building_an_Extension

Makepkg issue: cannot create temp file for here-document

Hi there,
Since few weeks ago i'm not able to build aur packages. I use yaourt but i notice the problem comes from makepkg (i searched for the output message and found fakeroot related issues). Here the complete log of, for example, launching makepgk on with the ruby-headers PKGBUILD:
$ makepkg
==> Creazione del pacchetto: ruby-headers 1.9.2_p136-1 (mer 9 feb 2011, 00.27.35, CET)
==> Controllo delle dipendenze per l'esecuzione in corso...
==> Controllo delle dipendenze per la compilazione in corso...
==> Download dei sorgenti in corso...
-> Download di ruby-1.9.2-p136.tar.bz2 in corso...
--2011-02-09 00:27:35-- ftp://ftp.ruby-lang.org/pub/ruby/1.9/ruby-1.9.2-p136.tar.bz2
=> "ruby-1.9.2-p136.tar.bz2.part"
Risoluzione di ftp.ruby-lang.org... 221.186.184.68
Connessione a ftp.ruby-lang.org|221.186.184.68|:21... connesso.
Accesso come utente anonymous ... Login eseguito!
==> SYST ... fatto. ==> PWD ... fatto.
==> TYPE I ... fatto. ==> CWD (1) /pub/ruby/1.9 ... fatto.
==> SIZE ruby-1.9.2-p136.tar.bz2 ... 8819324
==> PASV ... fatto. ==> RETR ruby-1.9.2-p136.tar.bz2 ...
Errore nella risposta del server, chiusura della connessione di controllo.
Altro tentativo in corso.
--2011-02-09 00:28:47-- ftp://ftp.ruby-lang.org/pub/ruby/1.9/ruby-1.9.2-p136.tar.bz2
(tentativo: 2) => "ruby-1.9.2-p136.tar.bz2.part"
Connessione a ftp.ruby-lang.org|221.186.184.68|:21... connesso.
Accesso come utente anonymous ... Login eseguito!
==> SYST ... fatto. ==> PWD ... fatto.
==> TYPE I ... fatto. ==> CWD (1) /pub/ruby/1.9 ... fatto.
==> SIZE ruby-1.9.2-p136.tar.bz2 ... 8819324
==> PASV ... fatto. ==> RETR ruby-1.9.2-p136.tar.bz2 ... fatto.
Lunghezza: 8819324 (8,4M) (non autorevole)
100%[====================================================================>] 8.819.324 107K/s in 1m 58s
2011-02-09 00:30:51 (72,8 KB/s) - "ruby-1.9.2-p136.tar.bz2.part" salvato [8819324]
==> Validazione dei file sorgenti con md5sums in corso...
ruby-1.9.2-p136.tar.bz2 ... Verificato
==> Estrazione dei sorgenti in corso...
-> estrazione di ruby-1.9.2-p136.tar.bz2 con bsdtar in corso...
==> Avvio di build() in corso...
==> Entrata nell'ambiente di fakeroot in corso...
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
==> Avvio di package() in corso...
==> Rimozione dei dati superflui in corso...
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
-> Rimozione degli altri file in corso...
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
-> Compressione delle pagine man ed info in corso...
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
-> Rimozione dei simboli non necessari dai binari e dalle librerie in corso...
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
==> Creazione del pacchetto in corso...
-> Generazione del file .PKGINFO in corso...
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
-> Compressione del pacchetto in corso...
xz: /tmp/rb_hdrs/ruby-headers-1.9.2_p136-1-any.pkg.tar: impossibile rimuovere: Successo
Hints?
Thanks in advance

That time it was in /tmp/ruby_headers (which i created) but it happens with yaourt too and for every pkg i tried.
[miche@bob tmp]$ yaourt -S ruby_headers
ruby_headers non trovato su AUR
[miche@bob tmp]$ yaourt -S ruby_header
ruby_header non trovato su AUR
^[[A[miche@bob tmp]$ yaourt -S ruby-headers
==> Continuazione dalla compilazione precedente
==> Scaricamento del PKGBUILD di ruby-headers da AUR...
Comment by: hilton on Tue, 28 Dec 2010 03:51:14 +0000
Updated to 1.9.2_p136!
First Submitted: Sat, 13 Nov 2010 20:25:52 +0000
ruby-headers 1.9.2_p136-1 : A package of all Ruby headers needed by some gems like ruby-debug.
( Pacchetto non supportato: Potenzialmente pericoloso ! )
==> Modificare il PKGBUILD (altamente raccomandato per ragioni di sicurezza) ? [S/n]("A" per annullare)
==> ----------------------------------------------
==>n
==> Dipendenze di ruby-headers
- ruby (già installato)
==> Continuare la compilazione di ruby-headers? [S/n]
==> ----------------------------------------------
==>s
==> Install or build missing dependencies for ruby-headers:
==> Compilazione e installazione del pacchetto
==> Dipendenze di ruby-headers
- ruby (già installato)
==> Creazione del pacchetto: ruby-headers 1.9.2_p136-1 (mer 9 feb 2011, 01.23.54, CET)
==> Controllo delle dipendenze per l'esecuzione in corso...
==> Controllo delle dipendenze per la compilazione in corso...
==> Download dei sorgenti in corso...
-> È stato trovato ruby-1.9.2-p136.tar.bz2
==> Validazione dei file sorgenti con md5sums in corso...
ruby-1.9.2-p136.tar.bz2 ... Verificato
==> Estrazione dei sorgenti in corso...
-> estrazione di ruby-1.9.2-p136.tar.bz2 con bsdtar in corso...
==> Rimozione dell'esistente directory pkg/ in corso...
==> Avvio di build() in corso...
==> Entrata nell'ambiente di fakeroot in corso...
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
==> Avvio di package() in corso...
==> Rimozione dei dati superflui in corso...
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
-> Rimozione degli altri file in corso...
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
-> Compressione delle pagine man ed info in corso...
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
-> Rimozione dei simboli non necessari dai binari e dalle librerie in corso...
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
==> Creazione del pacchetto in corso...
-> Generazione del file .PKGINFO in corso...
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 268: cannot create temp file for here-document: Successo
/usr/bin/makepkg: line 272: cannot create temp file for here-document: Successo
-> Compressione del pacchetto in corso...
xz: /tmp/yaourt-tmp-miche/aur-ruby-headers/ruby-headers/ruby-headers-1.9.2_p136-1-any.pkg.tar.xz: impossibile rimuovere: Successo
Error: Makepkg non ha potuto costruire il pacchetto ruby-headers.
[miche@bob tmp]$

Create .SCA file for MII project

Please let me know the steps in creating .SCA file for deploying MII projects developed using WorkBench with login page. I think that after creating the .SCA file we can deploy it using Eclipse under the menu Deploy View Console or using JSPM. After deploying we should be able to login using the credentials and should be redirected based on roles to appropriate pages.
I had deployed the intial .SCA file named (XMII08_0-20004625.SCA) using JSPM. MII version used is 12.1.8 and Netweaver version is NW CE 7.1 EHP1 SP5.
How we can set up the development environment in Eclipse or NetWeaver Developer Studio for MII project development so that we can directly create MII SCA file from the tool itself. Please share documents if any.

I need to modify the default login page in MII and redirect it to different URLs based on roles.
I am able to change the images in the default Menu.jsp in the NetWeaver login to Authentication page and inside properties tab. There I am able to change the images like branding-image.jpg, SAP NetWeaver image, SAP Image. But this is reflected in both the URLs
http://servername:50000/nwa and http://servername:50000/XMII/Menu.jsp
Then I changed the web.xml inside war file (tcsecumelogonui.war) which is in the path InstanceDirectory:\usr\sap\CE1\J00\j2ee\cluster\apps\sap.com\com.sap.security.core.logon\servlet_jsp\logon_ui_resources with the new Login.jsp file instead of Menu.jsp for the servlet tags but still when I access the new Login.jsp page from the URL http://servername:50000/XMII/Login.jsp it is still showing Menu.jsp. But when I tried to login using the Menu.jsp page then it is redirected to my new Login.jsp page.
Please let me know how I will be able to change and deploy a new login page in MII 12.1.8 and with NetWeaver CE 7.1 EHP1 SP5.

12c Create Control File for Entire CDB (CDB-root + PDBs)

Hi,
In 12c, I understand that there is a single redo log and a single control file for an entire CDB. My question is what datafiles should I use to create control file for the entire CDB. According to Managing Control Files, I suppose I should use all the datafiles (the result of query from CDB-Root: select name from v$datafile), but in practice, the control file creation process can only be successful when I use CDB-Root databfiles. Thanks in advance for any advice.

The actual error message is duplicate tablespace (system, sysaux), but the root-CDB and PDBs should have separate system and sysaux. The following is the script I used.
CREATE CONTROLFILE REUSE DATABASE "CDB" RESETLOGS ARCHIVELOG
    MAXLOGFILES 16
    MAXLOGMEMBERS 3
    MAXDATAFILES 1024
    MAXINSTANCES 8
    MAXLOGHISTORY 292
LOGFILE
GROUP 1 '/cdbdata/cdb/redo01.log' SIZE 50M BLOCKSIZE 512,
GROUP 2 '/cdbdata/cdb/redo02.log' SIZE 50M BLOCKSIZE 512,
GROUP 3 '/cdbdata/cdb/redo03.log' SIZE 50M BLOCKSIZE 512
DATAFILE
'/cdbdata/cdb/system01.dbf',
'/cdbdata/cdb/sysaux01.dbf',
'/cdbdata/cdb/undotbs01.dbf',
'/cdbdata/cdb/pdbseed/system01.dbf',
'/cdbdata/cdb/users01.dbf',
'/cdbdata/cdb/pdbseed/sysaux01.dbf',
'/cdbdata/cdb/pdb1/system01.dbf',
'/cdbdata/cdb/pdb1/sysaux01.dbf',
'/cdbdata/cdb/pdb1/pdb1_users01.dbf'
CHARACTER SET WE8MSWIN1252

Create desktop file for pdfs on an ipad

I downloaded pdfs from email on my ipad. How do I create a desktop file to keep the pdfs in?

Thank. I reluctantly came to that same conclusion.
In a message dated 9/24/2013 7:52:42 P.M. Eastern Daylight Time,
[email protected] writes:
Re: Create desktop file for pdfs on an ipad
created by MichaelKazlow (http://forums.adobe.com/people/MichaelKazlow)
in Adobe Reader for iOS - View the full discussion
(http://forums.adobe.com/message/5711108#5711108)

Creating spool file for Mass printing of smartforms

Similar Messages

Maybe you are looking for