Creating standby database and replication of primary database in 9i

Hi,
We have a 9i database on Windows Server.Now recently we are planning to replicate the primary database to standby database once after creating the standby database.Can anyone guide me with the procedure or documentation with this . We were asked to do this without the data guard set-up. Please do help me regarding this ASAP.
Regards,

specifiying ASAP isnt a way to get people to help on a volunteer forum.
If you dont have dataguard You need to search for "manual standby apply".
lots and lots and lots of google hits for you but this is the official cookbook
http://docs.oracle.com/cd/B10500_01/server.920/a96653/manual_recovery.htm

Similar Messages

Is the only way to import large amount of data and database objects into a primary database is to shutdown the standby, turn off archive log mode, do the import, then rebuild the standby?

I have a primary database that need to import large amount of data and database objects. 1.) Do I shutdown the standby? 2.) Turn off archive log mode? 3.) Perform the import? 4.) Rebuild the standby? or is there a better way or best practice?

Instead of rebuilding the (whole) standby, you take an incremental (from SCN) backup from the Primary and restore it on the Standby. That way, if, for example
a. Only two out of 12 tablespaces are affected by the import, the incremental backup would effectively be only the blocks changed in those two tablespaces (and some other changes in system and undo) {provided that there are no other changes in the other ten tablespaces}
b. if the size of the import is only 15% of the database, the incremental backup to restore to the standby is small
Hemant K Chitale

Use of standby redo log files in primary database

Hi All,
What is the exact use of setting up standby redo log files in the primary database on a data guard setup?
any good documents?

A standby redo log is required for the maximum protection and maximum availability modes and the LGWR ASYNC transport mode is recommended for all databases. Data Guard can recover and apply more redo data from a standby redo log than from archived redo log files alone.
You should plan the standby redo log configuration and create all required log groups and group members when you create the standby database. For increased availability, consider multiplexing the standby redo log files, similar to the way that online redo log files are multiplexed.
refer the link,and Perform the following steps to configure the standby redo log.:-
http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/create_ps.htm#i1225703
If the real-time apply feature is enabled, log apply services can apply redo data as it is received, without waiting for the current standby redo log file to be archived. This results in faster switchover and failover times because the standby redo log files have been applied already to the standby database by the time the failover or switchover begins.
refer the link
http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/log_apply.htm#i1023371

Content database and share point configuration databases in different sql servers

HI
i have a sharepoint 2010 farm and connected to a sql server ,
here it can be possible to connect all sharepoint configuration databases to one sql server,
and content database in different sql server ,
if i do in future can i face any issues?
adil

Yes you can. You can specify the SQL server whilst creating the databases and as long as you have configured the required permissions that will be fine. If you really wanted you could have a dedicated SQL instance for each database, although that would be
very wasteful.
There are no significant issues, you will have a bit more maintenance to look after two SQL servers but that's about it.

Urgent -Create RFC for update the database and delete from the database

Hi Guy's,
Please help me how to create the RFC for update to databse and delete from database(step-by-step) procedure.
Thanks and Regards,
Sai.

Hi,
Please go through the following link,
reward if helps.
[RFC Step By Step|https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action?pageId=39728]
regards,
mahantesh

Powershell to create link between Access database and an ODBC Pervasive database

So, I have the following script (thanks to JRV!):
function Link-ExternalODBCTable{
      Param(
         $accessFile,
         $tableName,
         $tableName2
     if(-not $tableName2){$tableName2=$tableName1}
     $access.DoCmd.TransferDatabase(
             [microsoft.office.interop.access.AcDataTransferType]::acLink,
            'ODBC Database',
            $accessFile,
            [microsoft.office.interop.access.AcObjectType]::acTable,
             $tableName,
             $tableName2
$testODBC='ODBC;DSN=A1013v2012'
Add-Type -Assembly Microsoft.Office.Interop.Access
$access = New-Object -ComObject Access.Application
$Access.OpenCurrentDataBase("E:\MyDir\TagLink.mdb")
Link-ExternalODBCTable $testODBC all_per
$access.CloseCurrentDataBase()
What I get is:
Exception calling "TransferDatabase" with "6" argument(s): "ODBC--connection to 'A1013v2012' failed."
When I try from the ODBC Administrator, it tests fine (Connection Successful!). This is a 32-bit ODBC connection, using the Pervasive ODBC Engine Interface. Same as we use for other ODBC connections to this database. It is a System DSN, as opposed to User
or File.
I tried to skinny this down to:
Add-Type -Assembly Microsoft.Office.Interop.Access
$Access = New-Object -ComObject Access.Application
$Connected = $Access.OpenCurrentDataBase("E:\MyDir\TagLink.mdb")
$access.DoCmd.TransferDatabase(
             [microsoft.office.interop.access.AcDataTransferType]::acLink,
            'ODBC Database',
            'ODBC;DSN=A1013v2012',
            [microsoft.office.interop.access.AcObjectType]::acTable,
             'all_per',
             'all_per'
$Disconnected = $Access.CloseCurrentDataBase()
...which yields the same error.
Where am I going wrong here?
mpleaf

If I try that, I get a new message:
Exception calling "TransferDatabase" with "6" argument(s): "Could not find installable ISAM."
The article you reference, I believe, is for SQL connection, not Pervasive SQL. I know the DSN works fine. We use it for other things a LOT.
I'm at a loss...and I can't seem to find the right combination...
mpleaf
The point is that newer Access does not appear to support DSNs on ODBC without an full ODBC driver. If you go DSN-less you will include the provider.
Pervasive has always been a pain. They break all rules and always have. If this is Intuit Pervasive then it is even worse.
¯\_(ツ)_/¯

Can you setup CDC on Replicated Database and not the source database

I just want to confirm the following:
Can you setup Change Data Capture on the replicated database. (SQL 2008 R2, SQL 2012)
To be clear CDC will not be setup on the source server database, it will only be setup on the replicated database.
Everything I've read so far says you can but there are pit falls and probably is not a good idea.
What are the pros and cons?
What is best practice.

Yes, you can.
Have you seen this article?
http://blogs.msdn.com/b/repltalk/archive/2010/04/19/change-data-capture-best-practices.aspx
I use replication all the way. You can replicate to a different table of a different schema in the same database. In most cases where people do cdc I find that they can use replication to achieve the same goals.
looking for a book on SQL Server 2008 Administration?
http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941

Why do we need standby redo log on Primary database.

Hi Gurus,
I was going through the document in OBE,
http://www.oracle.com/technology/obe/11gr1_db/ha/dataguard/physstby/physstdby.htm
I have two queries:
1) I noticed the statement -
"Configure the primary database to receive redo data, by adding the standby logfiles to the primary. "
Why do we have to create standby redo log on a primary database?
2) There is another statement --
"It is highly recommended that you have one more standby redo log group than you have online redo log groups as the primary database. The files must be the same size or larger than the primary database’s online redo logs. "
Why do we need one additional standby redo log group than in Primary database.
Could anyone please explain to me in simple words.
Thanks
Cherrish Vaidiyan

Hi,
1. Standby redo logs are used only when the database_role is standby, it is recommended to be added in primary also so that they can be used on role reversal, however during normal working standby redo logs will not be used at all on primary.
2. In case of 3 online redo log groups, it is recommended to use 4 standby redo log group this is in case if log switching is happening frequently on primary and all 3 standby redo logs are still not completely archived on the standby and 4th can be used here as there will be some delay on standby due to network or slowness of arch on standby.
Use of the standby redo log groups depends on the redo generation rate, you can see only 2 standby redo logs are getting used while you have 4 standby redo log groups, when the redo generation rate is less.
So it is recommended to have one more standby redo log group when redo generation rate is high and all of the existing standby redo log group are getting used.
Regards
Anudeep

Create multiple standby databases of primary database

Hi,
I have to create 2 standby databases of a single primary database,
where can i get the stpe for the same?
Thanks

user10745179 wrote:
What about FAL_CLIENT parameters in primary?
how to set the values of the above parameter in priamry for second standby database.?
Thanks,In your case do need setting FAL_CLIENT/SERVER in primary database,set these parameter correctly in your standby database.Refer below note
*FAL_SERVER And FAL_CLIENT Settings For Cascaded Standby [ID 358767.1]*

Getting error while creating standby database

I am creating standby database in oracle 10.2 on windows (same machine)and getting following error.Could any one please suggest me on this.
on primary database alert log file
================================================
Error 1031 received logging on to the standby
Fri Jul 17 18:09:23 2009
Errors in file c:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arc0_4512.trc:
ORA-01031: insufficient privileges
PING[ARC0]: Heartbeat failed to connect to standby 'IDR'. Error is 1031.
================================================
my LISTENER file is as below
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = Orcl)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(SID_NAME = Orcl)
(SID_DESC =
(GLOBAL_DBNAME = idr)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(SID_NAME = idr)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Gaurav-PC)(PORT = 1521))
and tns file is as below
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Gaurav-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
IDR =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Gaurav-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = IDR)
)

recreate the instance at standby database without password file
oradim -new -IDR standby -startmode manual recreate password file at primary database , copy the same password file from primary database to standby database,also make sure primary database started with REMOTE_LOGIN_PASSWORDFILE=EXCLUSIVE parameter.
Check also the primary database is able to tnsping to standby database.
Khurram

Standby Database not syncronized with primary.

DB: 10.2.0.4.0
OS RedHat Linux
My standby Database not syncronized with primary, because of space issue mrp process was stopped.
During that we added 4 datafile in primary database in that case how we can sync standby database?
There are no unamed files on standby database.
SQL> select name from v$datafile where name like '%UNNAME%';
no rows selected

Prath wrote:
When i trying to recover database getting below error:
Starting recover at 11-DEC-10
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 12/11/2010 12:00:23
RMAN-06094: datafile 73 must be restored
Note: Datafile 73 not available on standby database.Execute select name from v$datafile statement from standby and post there.
(Of course you can rebuild standby database again ,create standby controlfile and copy all datafiles)

Problem creating standby database using RMAN

I am preparing standby database on Windows environment. For the same..
1. I have taken full database,archivelog and standby control file backup on primary database.
2.Backup pieces have been moved to standby server.
3.TNS configured on both the servers.
4.connected to target as well as auxiliary database and trying to create the standby database using the below command...
duplicate target database for standby;
But I am getting the below error........
channel ORA_AUX_DISK_1: starting datafile backupset restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19870: error reading backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19504: failed to create file "E:\ORACLE\PRODUCT\10.2.0\ORADATA\AIRPRIM\CONTROL01.CTL"
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/01/2009 10:35:48
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
Please provide me the solution for the same...
Thanks in Advance.....
Sukanta

channel ORA_AUX_DISK_1: reading from backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19870: error reading backup piece E:\BACKUP\STNDBY_CF_AIRPRIM_T690931864_S25_P1
ORA-19504: failed to create file "E:\ORACLE\PRODUCT\10.2.0\ORADATA\AIRPRIM\CONTROL01.CTL"
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
failover to previous backup
Can you please confirm if the directory E:\ORACLE\PRODUCT\10.2.0\ORADATA\AIRPRIM is existing on standby box and rman can write to that location (free space & permissions)
If the issue is still present provide us the control_files parameter from standby..
- Ravi.M

Creating standby database from large databse

Hi Team,
we have to make standby database from very large database,primary generates daily 150GB arch
Please let me know which is the best method to build physical standby.
Regards,
Ajit

RMAN. It will only copy the used blocks so on a large database you can cut down a considerable amount of time.
If you turn on FORCED LOGGING on the primary, setup the directory structure on the standby server and copy the primary password file and INIT to the standby server and rename it you can use this short notes to create your standby :
http://www.visi.com/~mseberg/duprman.html
While these notes come from Oracle 11 they will also work on Oracle 10
Best Regards
mseberg

Restart on primary database restarts the recovery process on standby

We have a dataguar broker configuration running in maximum perfromance mode.
Every time we start the primary database, the recovery process on standby gets restarted.
I can consistently reproduce teh problem. Looks like expected behaviour.
Even if standby is in read only mode and restart the primary database it bring the database back in recovery mode.
Any explanation why oracle needs to do it?

Neil_Arul wrote:
We have a dataguar broker configuration running in maximum perfromance mode.
Every time we start the primary database, the recovery process on standby gets restarted.
I can consistently reproduce teh problem. Looks like expected behaviour.
Even if standby is in read only mode and restart the primary database it bring the database back in recovery mode.
Any explanation why oracle needs to do it?Yes, When you enable broker it very common behaviour.
When ever you bounce the database also MRP process will be started automatically.
By disabling broker you can avoid automatic startup, BTW Standby should be in recovery mode, i think no need to worry on this.
If you want to disable as per time, you can disable it as below
ALTER SYSTEM SET DG_BROKER_START=FALSE ;
Total Questions: 3 (3 unresolved)
Close the threads when you feel its answered, Keep the forum clean.
Edited by: CKPT on Feb 15, 2012 12:57 PM

How create new database and table in java db and how get java db backup

hi master
sir i use stuido creator
sir please give me idea how i create new database
and how create new table and view in this new database
and how get this database backup
how i give this databae backup to isp for deployment
please give me idea with step
thank
aamir

Create your own Value Object (Data Transfer Object) in Java with a structure similar to this and map the fields returned from the database to the fields of that object (preferably using SEtT methods).
Hope this helps.

Creating standby database and replication of primary database in 9i

Similar Messages

Maybe you are looking for