Creating summation in BEx for Cells

Hello Experts,
I want to display the sum of the Rows as is shown in the picture attached. Unfortunately, when I try to use the SUMCT or any other summation function in the cell, I do not get the option for selecting the ROW (for e.g. Mai or Juni or....).
Can anyone please show me some pointers on how to achieve this?
Thanks in advance.

Thanks Loed for the response.
when i give the FORMEL5 = KF1, then the value comes correctly for all the rows, which makes sense...
but unfortunately..i am getting "X" when I give the formula KF1 + KF2 + ...
Can you please help me with further pointers?

Similar Messages

How to create a dashed line for cell border

Hi,
Is anyone know How to apply the style for cell border to get the dotted line in WinRT
In WPF i will get the dotted line for cell border using this way.
<DrawingBrush Viewport="0,0,20,20" ViewportUnits="Absolute" TileMode="Tile">
<DrawingBrush.Drawing>
<DrawingGroup>
<GeometryDrawing Brush="Black">
<GeometryDrawing.Geometry>
<GeometryGroup>
<RectangleGeometry Rect="0,0,50,50" />
<RectangleGeometry Rect="50,50,50,50" />
</GeometryGroup>
</GeometryDrawing.Geometry>
</GeometryDrawing>
</DrawingGroup>
</DrawingBrush.Drawing>
</DrawingBrush>
Thanks in Advance,

check this thread:
http://stackoverflow.com/questions/14673643/windows-store-apps-how-to-draw-a-dashed-line
Fouad Roumieh

Create a VC Model for BEx queries with Cell Editor

Hello All,
I am trying to create a VC Model for BEx queries with Cell Editor.
BW Development Team has created a BEX query with complex restrictions and calculations using Cell Editor feature of BI-BEX.
The query output in BEx analyzer is correct where all values are being calculated at each Cell level and being displayed.
But, while creating VC model, system is not displaying the Cells.Thus, no VC Model can be created.
I have executed below steps:
1. Created a VC Model for BEx Query - ZQRY_XYZ
2. Create Iview -> Create a dataService -> Provide a Table from the Output
In the Column field system is not showing any of the Cells (present in Cell Editor)
Please help me to solve this issue.
Thanks,
Siva

Hi
If 'Cell Editor' is been used then that query must have the structure in it. You have to select that 'structure' object in your 'VC Table'.
If you select that then you will get the required result in the output. This structure will be the structure where 'cell reference' is used in BI query, You have to select that structures name.
Regards
Sandeep

Is it possible to create a tool tip for an individual cell?

Hi,
Is it possible to create a tool tip for an individual cell?
Sun's JTable tutorial shows how to create a tooltip for an individual column:
TableColumnModel tcm = table.getColumnModel();
TableColumn tc = tcm.getColumn(0);
DefaultTableCellRenderer renderer = new DefaultTableCellRenderer();
renderer.setToolTipText("This is a tool tip text");
tc.setCellRenderer(renderer);
Thank you.

See reply #2 below:
http://forum.java.sun.com/thread.jsp?forum=57&thread=424429
;o)
V.V.

What is the best way to import a graphic? & How do I create a text frame for a figure caption?

Hello all! I've been working from the FM book for almost 2 hrs trying to figure this out, so now I need your help. I am almost to this point:
Problem I: Importing a graphic
First of all, which is the best way?
-Insert an anchor frame and then import the graphic into the frame OR
-Just insert the graphic and get the anchor frame by default
Here’s my importing and sizing problem:
I hit ENTER to make a new paragraph line (side note: the book says make a new paragraph by hitting ENTER, import the graphic, and then ESC m+p to shrink wrap so that you can avoid the graphic overlapping the above text. I do exactly this (I believe), but my graphic still overlaps the above text when I shrink wrap. What the...?)
I insert an anchored frame with position Below Current Line and alignment CENTER (I chose to the insert anchor frame, since this way I have control over its alignment, correct?)
Anchor frame is selected when I import my image file
In the Imported Graphic Scaling box, what do I select if my file is HUGE (3072x2304)?
-Fit in selected rectangle (when I choose this the image imports small and fits in the anchored frame with lots of white space around it)
-72 dpi
-75 dpi
-150 dpi
-300 dpi
-Custom dpi: 96 (I’ve tried changing this to a smaller number (20) and I get a message that says “cannot handle a bitmap of that size.”)
I’ve had the best luck with selecting FIT IN SELECTED RECTANGLE, and then I just scale the image with my shift+click. If I choose 72 dpi or Custom, my image imports HUGE, and I just can’t manage it. I don’t have a method for resizing these images outside of FM.
Problem II: Creating a text frame for a caption
Once I have chosen FIT IN SELECTED RECTANGLE, I try to insert a text box underneath the image (and inside the anchor frame) to type a caption in it.
In Create New Text Frame box, the default is Number 1 and Gap 0.25. I click SET.
Next, I double-click inside the text frame to begin typing, but the cursor is OUTSIDE and UNDERNEATH the text frame! What the heck??? I’ve done this before and it has worked just fine. Then I had another problem where when I did get the text inside the text frame, I would select the text frame to move it, and it left the text behind! (I moved the frame but the text was separated from it and left behind.)
THANK YOU in advance for your help. I hope I wrote this out clearly enough. I appreciate those who respond. P.S. I'm in FM 10.

My favorite method is to use a one-cell table for graphics and captions.
Import the graphic by reference into the table cell. Create a "Caption"
paragraph tag and assign it to the table title. (The title can be set
for above or below the table cell. I prefer below.) Now, whenever you
insert this table, it will be ready for graphic and caption. Another
advantage of this method is that graphic and caption always stay
together at page/column breaks.
When you create the table format above, assign it to have a -2.0 space
above. Then, create a paragraph tag, such as "TableAnchor" and assign it
-2.0 pt font size and -2.0 space below. (You can substitute a different
point size, but it must be the same in all three places. The TableAnchor
paragraph will hold the table and these settings let tables fit against
the top margin where necessary. Otherwise, they dip down a bit.
I wrote this from memory, so I hope I remembered all the steps!

Steps to create a logical system for client 001.

Hi,
In client 000 go to transaction scc4. There you create your new client for sap netweaver abap trial version for BI?
Here, can you give me steps to create a logical system with client 001 using tcode scc4.
Thanks,
Kannan

hi
     First log on to SAP R/3 server connections Go to SCC4 in R/3 & in Scc4 BW server. A screen opens in that logical name of the system would be opened in both (R/3 & BW).
     Take notepad in it save .R/3 & BW logical names go to R/3 & click SM59 to create R/3 connections click then a screen opens gives BW logical name in RFC Destination option & give connection. type 3 & give some description & then press enter.
     You will get another screen under it then at target host gives BW server name we will get it from BW logon change ID, IP address option & give the system no. The system no go to logon pad just drag it then you will see the name.
     Then click on log on securities go to log on give BW server details like No, client user Password. Then save it then click test connection tab if there are errors then it gives yellow color if they are no error the whole thing come as white.
     Then click on the Remote Logon then we go to BW server give RFC SM59 & click create. Then give the server name which is at the bottom right corner give it then give the no, name, password in logon Security save it & test connection & then remote logon.
     R/3 - B W - R/3
     Logical connection source system connection is used to transfer the data from R/3 to BW. Go to BW system& click RSA1 go to source system option go to top to the source systems right click on it. Then click create then a screens opens then.
     PC Flat file , DB  Database
     Select the option manual then a screen appears RFC Destination, Logical source name then click OK then it goes to opens other screen save it test connection then remote login then it go back to the then a screen opens then click only activate.
     BW  RS1  SOURCE SYSTEM  CREATE MANUAL AUTOMATIC CELL
     R/3  Test connections login  back  replicate method  active data R/3 Source system you will able to.
regards
ashwin

I am using numbers to create a grade book for my classroom

I am using numbers to create a grade book for my classroom but would like to know how to link information in one table to a cell in another.

To reference to a cell in the same file, but in a other sheet user the following format:
sheet::table::cell
sheet: the name of the sheet
table: the name of teh table in the sheet
cell: the cell reference in the table (e.g. B5)
See also page 90 in the manual.
Or simple start to write the formula and click simple an the cell in the other sheet.
To reference a cell in a other file, there is in the moment no way, to do it (that I know).
https://discussions.apple.com/thread/1185100?start=0&tstart=0

How can I sum up raws? the sum function seems to work for columns only and right now I have to create a separate formula for each raw

How can I sum up raws? the Sum function seems to work only on columns. Right now I have to create a separate formula for each raw

Hi dah,
"Thanks, but can I do one formula for all present and future raws? as raws are being added, I have to do the sum function again and again"
You do need a separate formula for each group of values to be summed.
If the values are in columns, you need a copy of the formula for each column.
If the values are in rows, you need a copy of the formula for for each row.
If you set up your formulas as SGIII did in his example (shown below), where every non-header row has the same formula, Numbers will automtically add the formula to new rows as you add them.
"Same formula" in this context means exactly the same as all the formulas above, with one exception: the row reference in each formula is incremented (by Numbers) to match the row containing the formula.
Here the formula looks like this in the three rows shown.
B2: =SUM(2)
B3: =SUM(3)
B4: =SUM(4)
That pattern will continue as rows are added to the table.
Also, because the row token (2) references all of the non-header cells in row 2, the formula will automatically include new columns as they are added to the table.
Regards,
Barry

*Currency Conversion created in BW BEX query not working in BO report:*

Hi,
We have created a key figure with currency conversion and working fine in BEX when I execute that query.
But when created a BO universe and WEBI report on that query, I am getting following error.
"MDX query failed to execute with Error".
Can anyone please help.
Thanks
Dhana

Hi
Thanks. But new problem.
When I pulled OCURRENCY to free area now it is working in BO also.
But now another problem is --> for Currency translation am getting prompt in BO also to select target currency. There , all values (all currency types) are not displayed , only USD is coming. WEBI report is fine for USD conversion.
But when I want to convert into AUD , its not there in LOVs .
Some time back this problem exists in Bex also, but when we changed cube level setting as below:
Infocube : display-> OCURRENCY right click and go to "provider specific properties"..and then
go to "object specific properties " and then for "Query Exec Filter Val" selected "M Values in Master data table".
Now when executing query in Bex for target currency selection values it is taking from master data and displaying all types like USD, AUD, INR ..etc. in drop down list.
Now created new BO universe and new WEBI report but only USD is coming in selection LOVs not all types.
Please help us.
Thanks
Dhana.

How to create own Web Items for Web Application Designer

Hi all,
is it possible to create own Web Items for the Bex Web Application Designer? Each Web Item has a Master Web Item and a class that is responsible for rendering data. I need a solution to get the Web Item's data - i.e. the content of a table (if Web Item = table). So my approach would be to create an own (Standard) Web Item with an own class. For example I would like to change the table's Web Item parameter <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/> to an own class...
Is this possible?
Or ist there any possibility to get the Web Item's data by an interface?
Any support is welcome...thanks in advance!
Best regards,
Dominik

if you want to create your own webitem check out the link given by other sdner.
if you want to be able to execute BW query using abap you can check out the following weblog.
/people/durairaj.athavanraja/blog/2005/12/05/execute-bw-query-using-abap-part-iii
Regards
Raja

How to create hierarchies in Bex queries?

Hi All,
I am new to query designer tool,
can you please help me how to create hierarchies in Bex queries using query designer tool?
Thanks in advance...

Hi,
directly you can't create hierarchy at bex level.
First you have to maintain hierarchy data source at source or bw side, based on your needs.
Later you can load data to hierarchy, after that at bex level you can activate hierarchy options to related info object properties.
To maintain hierarchy we need to enable hierarchy options at related info object(RSD1, hierarchy tab, select with hierarchies) maintenance level.
For example: info object - 0GL_ACCOUNT and you need hierarchy structure on gl account.
For that we need to have hierarchy data source and will load data from ecc.
Later we can develop reports on gl account in hierarchy fashion.
On what object infoo bject you want create hierarchy report and have loaded hierarchy data?
Thanks

After i designed a website for desk top how do i save the site for cell phone

after i designed a website for desk top how do i save the site for cell phone use

I don't think you can simply save a desktop design as a cell phone design. While in Muse and in the site plan view for you website you should see three tabs near the top of the page. If you click the "Phone" tab, you will get a pop-up dialog box asking which element you would like to copy over from your desktop site (if any). You must then design the site for cell phone use. You can use the same objects, pictures, etc. from your desktop site and Muse should automatically optimize those elements for phone use. However, Muse does not automatically take a desktop design and create a cell phone design from it.
As I understand it, Muse uses user-agent detection to decide which site it wants to display to the user. You however, need to create the different versions of your site so that Muse can apply a specific design for the intended use.

Various cell renders for cells (not for columns only) in JTable

Hello, I need to create a property list with some various values (strings, colors, booleans) just like in Netbeans do. I will use JTable component, but I found I cannot have various cell editors for cells. In JTable cell editors can be only changed for COLUMNS. What sould I do?
ps - is there any JPropertyPanel avaiable for free on the web?

I had a similar problem recently whilst working on a Swing GUI designer (you're not doing the same are you? ;o). Presuming you already know how to create TableCellEditors you can use a very simple hack to achieve your goal.
Either extend the JTable class and override the getCellEditor(int row, int column) method, or override the same method when constructing the JTable (this is what I did). You would need to write something like:
JTable myTable = new JTable(){
    public TableCellEditor getCellEditor(int row, int column) {
        TableModel model = getModel();
        Object data = model.getValueAt(row, column);
        return getDefaultEditor(data.getClass());
}The getCellEditor method is called by JTable whenever a cell is to edited, normally it would check to see if the TableColumn has an editor associated with it and return that, if there wasn't one it would get the class of data for the column and return the default editor for that type of class, which is similar to what it does here except it returns the default editor for the class of an individual item of datum.
Now all you need to do is associate your TableCellEditors with the class types they are to edit with the setDefaultEditor(Class c, TableCellEditor editor) method of JTable. If, for instance, you had an editor for the Color class you would have a line something like:
myTable.setDefaultEditor(Color.class, new ColorCellEditor());Good luck, and I hope this helps.
MS.

When we create any EVDRE report for any application getting an error

Hi Experts,
When we create any EVDRE report for any application getting an error
EVDRE encountered an error retrieving data from the web server.. We also
tried creating EVDRE report on the APP SET/RATE application still getting the same error. All the cell base reporting are working. We are on the latest patch. the server and the client machine.
1) BPC Version : 7.0 MS (7.0.115.06)
2) SQ L Server 2005 SP3
3) Office 2007 with latest support packs
4) It is happening since the install
5) All users are getting the same error. Tried from two different PCs,
same issue. also tried the Install (ADM id) and also the ids created. All
ids are having this issue.
6) Single Server environment.
Please send reply as soon as possible.
Regards,
Arjun.

Hi,
There are many many SAP notes existing on the same subject.
I would recommend you to go through them. You will potentially find the solution for your problem.
Some examples of SAP notes: 1242648, 1395993, 1453433, 1439155, 1439100.
Hope this will help.
Best Regards,
Patrick

Choose designed GIF buttons in BEX for BI-IP

Dear Experts,
I would like to use designed gif buttons insted of
the bex standard buttons.
I created gif buttons(for example SAVE),
and created a BEX workbook with a grid and save button.
In DESIGN MODE when I choose for the button SHAPE and my GIF button exits design mode and save the workbook
everything looks fine.
However when I exist the workbook and reopen it the gif
disappears and I get a blank standard button.
Does anyone know how to solve this issue?
Amir

I have the same problem. there seems to be an issue with different GUI versions - I have the most recent (GUI 9, BEx 7) and the shape files are lost, however a colleague who has an old version (GUI 2, BEx 1) doesn't have the problem with the same workbook. It's also a bit worrying that the SAP help makes no reference to this area on the button definition to attach a 'Shape ' - almost as if they were going to implement some functionality but then didn't bother!
Anyway, I have tried another approach which works for me:
1. Add a blank worksheet (which you will eventually Hide when development is complete).
2. On this worksheet, create your button with planning function (or whatever you need), but do not load a shape file. Make a note of the item name generated by BEx for the button (e.g. BUTTON_12).
3. On your actual worksheet, insert your .gif as a picture item (using Excel menu option Insert -> Picture -> From File). Position the picture where you want your button to be.
4. Right-click on the picture and choose the option 'Assign macro'.
5. Find the macro associated with the button you created on the hidden sheet in the dropdown list, and assign it to the picture. For example if your hidden sheet is woorksheet 4, and the button is BUTTON_12, the macro will be Sheet4.BUTTON_12_CLICK.
You should then find that when you click the .gif (which is effectively only an Excel object), it will call the macro assigned to the hidden button, which then runs the BEx macro.
It works for me - hope it works for you!

Creating summation in BEx for Cells

Similar Messages

Maybe you are looking for