Creating Table View's with more than one table

I have two custom tables.
Table A has 2 fields: Code and Description
Table B has 4 fields: Code, Country, Emp Group and Personnel Area
I would like to build a view which has: Code, Description, County, Emp Group and Personnel Area. This view should be able to pull in the Description from Table A when the user enters in the Code.
I have created a view with SE11 and have put both Table A and B with joins as follows: A Code = B Code. Under the view fields I have put the fields B.Code, A. Description, B.Country, B.Emp Group and B.Personnel Area.
When I generate this view (Utilities, Table Maintenance Generator) it only shows the Code and Description field. It does pull in the Description automatically which is great. The issue is 2 things 1) The Description can be changed and 2) The other fields I specified above are not included on the view (e.g., Country etc.)
Any ideas?

I have checked several times that it is against the view as it is so strange that not all of the fields are appearing.
I go into SE11, Click on View, Type in the View Name and then Change. I goto into Utilities, Table Maintenance Generator and select it as one Step and then click on the Create Button. When I go into SM30 I only see the 2 fields?

Similar Messages

Create a logical column with more than one data source

I'm having a problem to create a logical column with more than one data source in Siebel 7.8.
What I want to do is the union of 2 physical tables in one logical table.
For example, I have a "local_clients" table and a "abroad_clients" table. What I want is to have a logical table "clients" with the client data from the 2 tables.
What I've tried is dragging the datasources I need onto the logical column.
However this isn't working because it only retrieves the data from the first data source.

Hi!
I think it is not possible to do this just by dragging the columns to the logical table. A logical table can have more than one source, but I think each column must have just one direct source column.
I'm not sure, but maybe you should do the UNION SQL to get the data of the two tables. In the physical layer, when you create a new physical table, it's possible to set the "table type" as a "SELECT". I didn't try that, but it seems that it's possible to have the union table in the physical layer.
Bye.
Message was edited by:
user578388

Creating Pages in PeopleSoft with more than one HTML Form

Hi,
We've a requirement to create a page in PIA with more than one HTML form.
As per PBooks - "The page being developed cannot be built using PeopleSoft Application Designer.
An example of this is a page that requires more than one HTML form.
PeopleSoft Pure Internet Architecture places the entire page inside of a single form tag, so no other HTML form tags can be added.
In this case the requirements of the page can't be met by pages created in PeopleSoft Application Designer, so use IScripts instead."
If someone can share his/her experience, It Would be of great help to me.
-Thanks!!

Take a look at my IScript postings. Let me know if you still have questions after reading these blog posts.

Trying to create Mouse over effect with more than one show image appearing in same cell

Firstly this is the link to my test page: http://www.design39.co.uk/indexhope.html
If you roll your cursor over the top left logo (the D&S) one it displays an image to the left. If you roll your cursor onto the next logo (Netnotts) it fades away again. Great. Exactly what I wanted and created in CSS (well done me as I don't normally do much with CSS but the new CS4 has very forced it).
What I am trying to create is: When you roll onto the Netnotts logo, not only does the original image to the left disappear but a new relative one appears, this is to be for all the logos. In CSS I can only create it as far as I can. I have thought about using AP DIV tags to do it which would obviously work but to keep it in the right place, I would then have to align my whole website to the left instead of centered like it is and to be fair, that's not particularly pleasing to the eye as this is my own portfolio of work.
I can do flash to make 'pretty things' but have no idea about actionscript and java is way over my head but I am sure with some help I would be able to get it together as the that particular effect, although done in CSS, is running javascript I noticed.
Many thanks in advance.

A relative positioned layer? does this mean it knows how far to be away from the table as a pose to an absolute positioned layer which is lay 15px from the left? I need to be able to keep the positioning as its key, cant have the layer popping up in different places pending on the users browser size.
I posted the question on a few forums and I got the following back: http://www.design39.co.uk/bla.html
which is exactly what i wanted it to do but have no idea how to insert java script into my page; Further more, that was done in layers not table cells.
Any ideas?

Tax code with more than one tax rate

Hi,
I am using TAXINN procedure and I created on tax codes with more than one rate. i.e. for service tax I created a tax code S1 with 3 rates as follows
Acc. Key    Tax %      condition type
VS9            12             JSE4
VS0              2             JES4
VSS              1             JHS4
When I am trying to post a document with the above tax code the system is giving the following error message
Tax code S1 may only contain one assignment line
Message no. FF731
Diagnosis
For direct postings to tax accounts, only tax codes containing exactly one tax line may be used. Tax codes with several rates or a nondeductible portion are not allowed here.
Procedure
Use a different tax code.
For direct postings to a tax account, you might have to define a separate tax code for which only one line with a percentage rate other than zero is active in percentage rate maintenance. All other lines must be inactive.
To do this, choose Maintain entries (F5).
Could you please let me know how to rectify this problem? I want to post 3 line items for each of base rate, Edu. Cess and Higher Edu.cess.
Advance thanks for your help and
Regards
Koteswara Rao Padarti

The problem is in the master data of the revenue account. the tax category should not be > and it should be *

Create a dynamic search in JSP with more than one datasource

Hello,
In the ViewCiteria tag you can specify the datasource in which you want to place the criteria. Is it also possible to work with more than one datasource ?
In my project I want one query form for specifying criteria for more than one datasource. When I send the query form, I want the right view criteria will be coupled with the right datasource.
Has someone more experience with that ???
Thanks!!!

Hi,
I think I got the same problem! I tried to combine all the tables in a new view and create a query on this view.
But when I search and my result has to be one record from the main table, I get this record more than once.
I tried to use distinct but that does not work because each column has a different value, so the record is never the same.
I hope someone can help us!

Error while running spatial queries on a table with more than one geometry.

Hello,
I'm using GeoServer with Oracle Spatial database, and this is a second time I run into some problems because we use tables with more than one geometry.
When GeoServer renders objects with more than one geometry on the map, it creates a query where it asks for objects which one of the two geometries interacts with the query window. This type of query always fails with "End of TNS data channel" error.
We are running Oracle Standard 11.1.0.7.0.
Here is a small script to demonstrate the error. Could anyone confirm that they also have this type of error? Or suggest a fix?
What this script does:
1. Create table object1 with two geometry columns, geom1, geom2.
2. Create metadata (projected coordinate system).
3. Insert a row.
4. Create spacial indices on both columns.
5. Run a SDO_RELATE query on one column. Everything is fine.
6. Run a SDO_RELATE query on both columns. ERROR: "End of TNS data channel"
7. Clean.
CREATE TABLE object1
id NUMBER PRIMARY KEY,
geom1 SDO_GEOMETRY,
geom2 SDO_GEOMETRY
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM1',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM2',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO object1 VALUES(1, SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(550000, 450000, NULL), NULL, NULL));
CREATE INDEX object1_geom1_sidx ON object1(geom1) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
CREATE INDEX object1_geom2_sidx ON object1(geom2) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE' OR
SDO_RELATE("GEOM2", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
DELETE FROM user_sdo_geom_metadata WHERE table_name = 'OBJECT1';
DROP INDEX object1_geom1_sidx;
DROP INDEX object1_geom2_sidx;
DROP TABLE object1;
Thanks for help.

This error appears in GeoServer and SQLPLUS.
I have set up a completly new database installation to test this error and everything works fine. I tried it again on the previous database but I still get the same error. I also tried to restart the database, but with no luck, the error is still there. I geuss something is wrong with the database installation.
Anyone knows what could cause an error like this "End of TNS data channel"?

Spatial index creation for table with more than one geometry columns?

I have table with more than one geometry columns.
I'v added in user_sdo_geom_metadata table record for every column in the table.
When I try to create spatial indexes over geometry columns in the table - i get error message:
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13203: failed to read USER_SDO_GEOM_METADATA table
ORA-13203: failed to read USER_SDO_GEOM_METADATA table
ORA-06512: at "MDSYS.SDO_INDEX_METHOD", line 8
ORA-06512: at line 1
What is the the solution?

I'v got errors in my user_sdo_geom_metadata.
The problem does not exists!

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don't know how indesign can do this action.

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don’t know how indesign can do this action.

set the wake-on lan on the main computer
The laptop's too far away from the router to be connected by ethernet. It's all wifi.
No separate server app on the laptop, it's all samba
The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
Last edited by saft (2010-03-18 20:38:08)

How to read an internal table with more than one (2 or 3) key field(s).

how to read an internal table with more than one (2 or 3) key field(s). in ecc 6.0 version

hi ,
check this..
report.
tables: marc,mard.
data: begin of itab occurs 0,
      matnr like marc-matnr,
      werks like marc-werks,
      pstat like marc-pstat,
      end of itab.
data: begin of itab1 occurs 0,
      matnr like mard-matnr,
      werks like mard-werks,
      lgort like mard-lgort,
      end of itab1.
parameters:p_matnr like marc-matnr.
select matnr
       werks
       pstat
       from marc
       into table itab
       where matnr = p_matnr.
sort itab by matnr werks.
select matnr
       werks
       lgort
       from mard
       into table itab1
       for all entries in itab
       where matnr = itab-matnr
       and werks = itab-werks.
sort itab1 by matnr werks.
loop at itab.
read table itab1 with key matnr = itab-matnr
                          werks = itab-werks.
endloop.
regards,
venkat.

Table cell with more than one component

how can i make table cell with more than one component
like below, cell in column 3 contains few button
col0 | col1 | col2 |
a | b |[btn1] [btn2] [btn3]|
a | b |[btn1] [btn2] |
and when i click on the any of the button a dialog box pop up saying something..

Here's link to someone who did a lot with tables. Not sure about multiple buttons, but it should get you started.
http://www2.gol.com/users/tame/swing/examples/SwingExamples.html

JSR-75 PIM API creating Contact with more than one Number (Phone,Fax ...)

Hi everybody
I try to create a contact with more than one Phonenumber using the method contact.addString(...) .
Contact with one single number is no Problem but contacts with more than one Number are ignored and are not stored to the phonebook. I try to add the Numbers using a for -loop. Is there an other way to solve this Problem?
please Help.
Thank You.

Wonder if you have made any progress - if so,
could you share ?

Import AP Invoices with more than one Prepayment Application

Hi,
We have a requirement to import AP Invoices from the legacy system with more than one prepayment application to the invoice.
The AP_INVOICES_INTERFACE table provides only one column for Prepayment Number. Also, more than one line can not be created for the same invoice number.
Is there any solution to the above situation?
Gajendra

Dear Srikanth,
Thanks a lot for your reply.
We want add a invoice with DI API, but the DI API provide only one costing center: CostingCode in Document_Lines Object. But we have two costing centers, one is department, the other is salesperson.
This is my question.
It will be appreciated highly if you give me a solution.
Thanks!
Xingjun Han

Send email from SAP with more than one attachment

Hi all,
How can i send email with more than one attachment and different types of document(doc,pdf,etc.) from SAP to external?
Besr regards,
Munur

Hi,
I use :
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
the main problem with different attachemts is to genereate the packing_list.
the packing list is a kind of description of the data table... where ist the start of an image, end, size...
"Creation of the entry for the compressed attachment
        objpack-transf_bin = 'X'.                    " it could be an image
        objpack-head_num = lv_head_num_count . " inital 1 each att add 1
        objpack-head_start = 1.                     " fix
        objpack-body_start = gv_startnum.    " table with attachments 1. line one
        objpack-body_num = tab_lines.          " how many lines are in the table of attachment
        objpack-doc_size = tab_lines * 255.   " size of the attachment...
       objpack-doc_type = lv_typ . " 'JPG'.
        objpack-obj_name = 'ATTACHMENT'.
        objpack-obj_descr = lv_stripped_name " name of the JPG
   APPEND objpack.
   APPEND LINES OF lt_goscontent TO gt_maildata. " data Table...
bestreg
robert

Reversing Landed Cost document with more than one vendor

Hi Experts,
Reversing Landed Cost document with more than one vendor:
My client can reverse a landed cost document with One Vendor, but cannot with multiple vendors. I have also tested this in 8.8 PL10. Here is a brief description:
Created Landed cost by selecting 2 vendors in the Vendor field.
After you picked one vendor, you go to the vendor code/name again then choose another vendor you
need, once you picked, the system will ask you whether you want to delete the previous data, then
you say no, after then you will see the vendor name became "different vendors" and code be "********"
(on the vendor tab: you will see two vendors)
To Reverse Landed Cost we do the following with Landed Cost documents that only have one vendor:
I can copy from the Landed Cost document (on the right-bottom corner) while creating new one with
zero amount to reverse, which is ok; but for multiple vendors, the list of vendors onlyshows one of
the vendors for Good Receipts & Landed Cost.
Cannot copy from a Landed Cost document wioth more than one vendor to reverse this Landed Cost.
To be albe to copy from a previously created Landed Cost document (with multiple vendors) as you
can with one vendor to reverse the transaction.
Can this functionality be added to future versions?

Take a look at business area and groupings in they payment program settings...
I am not sure what version you are on but the following link for 4.7 should provide some valuable information...
http://help.sap.com/saphelp_47x200/helpdata/en/01/a9be64455711d182b40000e829fbfe/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/01/a9be64455711d182b40000e829fbfe/frameset.htm
Grouping Open Items and Individual Payments
Wherever possible, the payment program will always group items together for payment.
The payment program can only group together open items for payment if the open items in an account have the same:
1. Currency
2. Payment method in the item
3. Bank in the item
4. Contents of the grouping fields (if a grouping key is specified in the customer or vendor master record)
You can also pay open items from different company codes together, as well as customer and vendor line items.
Items in an account are not grouped together if you:
1. Make payments separately per business area. This procedure entails separate payments being created per business area.
2. Want to make individual payments
Items in which a payment method is specified are not grouped with items in which no payment method is specified.
You define the required grouping key in the IMG for Financial Accounting under Accounts Receivable and Accounts Payable -> Business Transactions -> Outgoing Payments -> Automatic Outgoing Payments -> Payment Method/Bank Selection for Payment Program -> Define Payment Groupings.
In our system, if the business area is the same, there will be one ZP document with one line with a posting key of 25. Otherwise there will be many individual 25 posting key lines with.

Creating Table View's with more than one table

Similar Messages

Maybe you are looking for