Creating TabStrip control using visual composer
Hi,
I am NW04 version for Visual Composer. I want to create a TabStrip control on which I want to show two table from a RFC. Is there any facility available to create this like NW2004s. I found from some posts that NW04 verson doesn't have capabilities to create listbox. Or is there any patches available and after applying we will get the functionality??? Or can I install VC for NW2004s and it will be compatible with EP 6.0??
Please suggest.
Thanks,
SA.
Use layers and set the correpsonding property. Tabstrip is one of the options in 2004.
Mario
Similar Messages
-
How to create subscreens in tabstrip control using module pool
hai experts,
can u plz give me step by step procedure to create subscreens in tabstrip control using module pool,hi,
You can check this program
<b> DEMO_DYNPRO_TABSTRIP_LOCAL </b>
This will help you in understanding the concept and how to create subscreens.
Regards
Nishant -
How to work with BI using Visual Composer....?
Hi
I want to work with BI report and BEx analyzer etc using Visual Composer.
I am using Visual Composer 7.1. I have configured BI system connection using the following link
http://help.sap.com/saphelp_nwce10/helpdata/en/7e/6dbcea3700452195e3bddaa47c5906/frameset.htm.
In the above document i didnt understand the following para....
Creating BI Users in the Portal
Ensure that the BI back-end users also exist in the J2EE Engine. You can use the BI back end as the user store for the J2EE Engine or you can create the users manually. If you create the users manually, you should ensure that they have the same names as in the BI back-end; this avoids the need to configure user assignment.
How to check BI back end user also exist in J2EE engine ?
How to use BI kit in Visual composer. From where can i download BI kit for Visual Composer.
What is the difference between developing application in VC using the above method and using BI kit.
Please help me....
Regards
Sowmya....Hi,
Without the BI kit you cannot do a lot of things in VC 7.1.
This kit is not available with 7.1.
The part that you did not understand meant that if you opening VC using a certain id in portal for eg "user" then the same id should be present in your backend system in this case BW system.
Without this it wont be able to connect to the system.
Hope this helps
Regards
Nikhil.
Reward points if you find the answer helpful -
What are the front end tools & components needed to use Visual composer.
Hi all,
please help for the following queries.
1.What are the front end tools & components needed to use Visual composer.
2. Is it possible to view in internet explorer web reports/ Dash boards created in Visual composer.
3. How to create Webreports & Dash Boards in Visual composer.
It's Urgent waiting for responses.
Thanks & Regards,
Basava RajuHi James,
For Visual Composer no need any Front end tools.. you need portal connection.. to configure your visual compoer.. the visla composer it self contain all the items.. just like a Webtemplate..
all the reports.. that web based reports or dash boards we can view through Browser only..
for creating reports in visal composer.. just go thru this links..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c6b2d590-0201-0010-42ba-a53a5d422310
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7d48d999-0701-0010-5790-8b2c5ae7107d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1752b737-0401-0010-0ba3-87c3eda8c6ce
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cab252d4-0a01-0010-3984-ee345859dde6
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01c5d690-0201-0010-668a-b8d97d51a566
for How to Guides - Visual Composer.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/16244247-0a01-0010-3294-d81c21e7e86e
/people/marcel.salein/blog/2007/02/01/visual-composer-and-abap-rfcbapi-a-powerful-combination-part-i
/people/marcel.salein/blog/2007/02/02/visual-composer-and-abap-rfcbapi-a-powerful-combination-part-ii
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01c5d690-0201-0010-668a-b8d97d51a566 https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/16244247-0a01-0010-3294-d81c21e7e86ehttps://www.sdn.sap.com/irj/sdn/visualcomposer
regards
@jay -
Passing output of one iView as input to another iView using Visual Composer
Hi
I need urgent help. Is it possible to pass data from one iView to another using the Visual Composer tool. If it is how? Does anyone have an example or know where I can find one.
Here is my example:
I have created one Page with two iViews on the page. In the first iView i have a Bapi that accepts an ID number of a business partner as input and returns details like Name, Surname , title etc as well as the SAP Business Partner Number. The second Iview uses a Bapi that returns the Address details of the business partner.My problem is that I need to use the Business Partner Number from the first iView as the input into the second iView. Is this possible using Visual Composer? There will be a series of additional all bringing back different details of the same Business Partner and will need to use the same Business Partner Number.
Please advise me if this is possible using VC or if not suggest an alternative way of doing it.
Thanks in advance for the help.
Regards
Yusuf GangatYes you can do this.
You can use ports (Signals) for this.
In order to explaing this, I will call the 1st iView - the source iView and the 2nd one - the target iView.
1. In the source iView create an "Out Port" from the form or table where you have the details you want passed. Name it anyway you want (in the Properties task pane).
2. In the target iView create an "Input Port" and connect it to the input of the BAPI you want run.
3. Make sure that both ports have exactly the same name (it's case sensitive). and the same fields.
4. Deploy the 2 iViews to the portal, put them in the same page.
Data should be transferred now between the iViews.
Lior -
What is advantage of using Visual Composer In SAP
Hi friends,
please tell me what is advantage of using visual composer in SAP.
and please give me basic notes to understand Visual Composer.
I Don't have any idea about this topic.
please help me.
Thanks & Regards,
YogeshHi Yogesh,
SAP Visual Composer is a browser based, graphical modeling tool that - by reusing existing data services like RFCs, web services, queries, query-views, tables - allows creating business applications with both transactional and analytical services seamlessly integrated. In addition it gives modelers the choice to select the UI technology and build user interfaces.
Go through the following links:
Getting Started with Visual Composer for SAP NetWeaver 7.0 [original link is broken]
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/6cb05174-0701-0010-448b-caf8c6fcc97a
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2e254377-0c01-0010-9787-b285e9af529f
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ceea45f3-0c01-0010-049c-c2b001f590fb
Reward points if helpful.
Regards,
Renuka. -
How to create i view in visual composer give details screenshots
how to create i view in visual composer give details screenshots
Hi,
Go through these threads
VisualComposer
http://help.sap.com/bp_epv170/EP_US/HTML/Executive_Cockpit.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1752b737-0401-0010-0ba3-87c3eda8c6ce
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e019d290-0201-0010-f186-8630a949800a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30987099-a74c-2a10-70b5-a2751ce79359
http://help.sap.com/saphelp_nw04/helpdata/en/fd/4a7e40417c6d1de10000000a1550b0/content.htm
Tarak
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00b9ba6d-1291-2a10-208d-bd27544e7939 -
Sample Application developed using visual composer
Experts,
Please provide some links to develop application through visual composer. How to develop application using visual composer.Hi Nitti,
Please check these links for VC Iconfig and development:-
http://help.sap.com/saphelp_nw70/helpdata/EN/43/395a596c8a1806e10000000a1553f6/content.htm
http://www.sdn.sap.com/irj/sdn/nw-vc
Regards
Venkat -
Business process using Visual Composer
Dear Friends,
Can you please tell me how to make business process using Visual Composer.
any link or how to guide will be highly appricated.
regards
MalikHi Malik,
do you refer to the Netweaver BPM Composition Environment? This is explained here:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a0886795-eaa0-2b10-7c97-d81b97372327
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/20604ba3-87a6-2b10-ea8d-cb9f3ea8af8a
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/502d481c-8da6-2b10-68b8-e374cd30913f
Just search for Netweaver BPM...
I hope it helps.
Best regards,
Joern -
Hai all,
Good day. I am new to Visual C++. I tried and done some simple programs and dialog based programs in MFC application using Visual C++. But when i am trying to do
VC++ smart device win32 smart device project application project, not getting how to add event handler function for button. I tried serial communication in smart device application. i have inserted dialog and in that
no event handler. Can you please guide me to make a project for embedded board in VC++ smart device application.
Thanks & Regards Sasi ................. Go GreenHi kvg,
Thanks for posting in MSDN forum.
From your post, it seem that this issue is better ask to the
Visual Studio Smart Device Development - Native C++ Project forum. I will move your thread to that forum for a better support. Thanks for your understanding.
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Creating TabStrip control with VisualComposer
Hi,
I am NW04 version for Visual Composer. I want to create a TabStrip control on which I want to show two table from a RFC. Is there any facility available to create this like NW2004s. I found from some posts that NW04 verson doesn't have capabilities to create listbox. Or is there any patches available and after applying we will get the functionality??? Or can I install VC for NW2004s and it will be compatible with EP 6.0??
Please suggest.
Thanks,
SA.Hi Sri,
tabstrip control is not possible with vc (nw04 version).It is only possible with vc nw04s. and this nw04s is not compatible with ep 6.0. hope this ll help u.
regards
Amit
P.S. reward points if helpful -
Create a Table in Visual Composer 7.0
Is there a way to create a custom table, as part of the model, where you can define some custom fileds, then have users add, delete or update those table fields from a form? Similar to how you would use MS Access?
Thanks
JohnHi John,
You can add, delete or update the table entries from a form using system actions in visual composer. But you should create a form manually and also need to make buttons with system actions addrow, deleterow etc,. to set the system actions.
Regards
Basheer -
Use visual composer for maintenance transaction of R/3
Hi:
Can I use the visual composer as a tool to connect to maintenance transaction of R/3.
Can I use it to build a sales order or a porches order in the R/3.Does anyone know if you can use an IDOC interface with VC? Also, does anyone have suggestions for a BAPI for creating and displaying notifications?
Any help is appreciated.
Pete -
Cannot see created Web Service in Visual Composer Search
I am following the example of chapter 2 of the book"SAP Netweaver Composition Environment". I am trying to search for a web service that has been created, but I cannot find it.
I created a logical destination for the service, named EDMProjectDestination, using nwa->Configuration Management->Infrastructure->Destinations. This was OK, but when I try to search for it in the Visual Composer environment, it does not appear on the list after a refresh or even a system reboot.
Also, when I go back to the Web Services navigator, and try to search by Logical Destination, I am told that there are no logical destinations configured.
Can somebody please inform me what mey be missing here?
BR,
Tony.Hi,
That did it, thanks!
This is a completely different location to that specified in the book.
BR,
Tony. -
Problems using Visual Composer with Web Dynpro runtime
I am currently trying to build a Visual Composer iView and we need to use the Web Dynpro runtime rather than Flash because it needs to work with a screen reader for users with sight problems. Which is a pity because Flash works fine. But when I use Web Dynpro runtime I'm getting the following problems:
a) When I define fields and pushbuttons in forms where Align Contents is set to Absolute, they do not appear at runtime in the positions in which I've placed them - all form elements are aligned vertically. The only other options are to align all fields vertically or align all fields horizontally. This lack of flexibility makes it rather difficult to create a good screen design; the only option seems to be to create a separate form for each set of differently aligned fields, which leads on to the next problem. .
b) When I define more than one form on a page, again at runtime the forms do not always appear in the positions in which I've placed them; the compiler seems to calculate how much space it needs to display the screen elements and then re-sizes and re-positions the forms accordingly, ignoring what I've told it to do.
c) Toolbar pushbuttons do not appear on forms (they do appear on tables). Irritating, but at least I can still create pushbuttons on the form itself.
There are other issues, but the main problems is that it appears that when I use VC with Web Dynpro I cannot trust the editor layout at all and the only way I can build something that looks decent is to fiddle about with field / form sizes and positions, checking every change on the output, until hopefully I get it looking ok. Having to do this will dramatically increase the time taken to develop VC applications. Has anyone else experienced these problems with VC and Web Dynpro? Has anyone managed to overcome them?Thanks, but neither of these describes the problems I've been having. And they are misleading since they say that you can use VC with Web Dynpro only with Web Services ie not directly with BAPIs / RFCs, but using it with BAPIs / RFCs is one of the few things that works well in our system.
The most recent problem I've found is that if you make a form or table read-only it will stay read-only in Flash but the fields are editable in Web Dynpro. The individual field disable option does work for Web Dynpro, but it turns the fields from black to a vey pale and almost invisible grey (this doesn't happen in Flash). And you can't seem to change this.
It does seem to be a bit pathetic that input fields can't be made read only. I've tried expression boxes, which are read-only anyway, but they appear in as pale a grey as the disabled input fields. And although plain text fields can be added to tables, they are pretty useless since they can only hold a single value and so all the lines will contain the same value.
I guess I should resign myself to the fact that I am never going to be able to produce a decent screen using VC and Web Dynprp.
Maybe you are looking for
-
Just installed iMac firmware update - iphoto no longer works (beach ball)
I just installed the most recent iMac and keyboard firmware updates. Now when i try to use iphoto it opens quickly and then as soon as i try to do anything i get the spinning beach ball until i force quit. I have no idea how to fix this. I have reboo
-
Ipod resets during song update
When I connect the iPod to the PC and start updating songs, the ipod reboots after a while. Not just that, but the ipod will show something like 1gb of used space and only 50 songs (just an example, it hasn't gotten this serious.) worst... when this
-
Hello everybody! I have following question please: I am working on a Sun Blade 100 with Solaris 10. In this blade a SUNpci2 card exists. So, is it possible to use this card? I tried SUNWspci2 (2.3), but I got some errors. I tried to patch it, but it
-
Hi, There is a pdf document i use as a template say, when I go to enter some text, into the name box for example, i get a drop down list of previous names, which is proving very annoying. Is there a way of preventing this from happening. Thanks
-
My friend gave me some music that I had uploaded to itunes, that I used in my playlists and everything was fine. The last time I updated the playlists, he music was gone from the playlist on my iphone but was still on the regular list of music on the