Creating TabStrip control with VisualComposer

Hi,
I am NW04 version for Visual Composer. I want to create a TabStrip control on which I want to show two table from a RFC. Is there any facility available to create this like NW2004s. I found from some posts that NW04 verson doesn't have capabilities to create listbox. Or is there any patches available and after applying we will get the functionality??? Or can I install VC for NW2004s and it will be compatible with EP 6.0??
Please suggest.
Thanks,
SA.

Hi Sri,
tabstrip control is not possible with vc (nw04 version).It is only possible with vc nw04s. and this nw04s is not compatible with ep 6.0. hope this ll help u.
regards
Amit
P.S. reward points if helpful

Similar Messages

Request for code on Tabstrip controls with subscreen in it.

Hi experts,
Can somebody please provide me the code for tabstrip controls with subscreens in it?
Thanks,

Hi,
<li>Check the demo program DEMO_DYNPRO_TABSTRIP_SERVER.
Thanks
Venkat.O

Creating TabStrip control using visual composer

Hi,
I am NW04 version for Visual Composer. I want to create a TabStrip control on which I want to show two table from a RFC. Is there any facility available to create this like NW2004s. I found from some posts that NW04 verson doesn't have capabilities to create listbox. Or is there any patches available and after applying we will get the functionality??? Or can I install VC for NW2004s and it will be compatible with EP 6.0??
Please suggest.
Thanks,
SA.

Use layers and set the correpsonding property. Tabstrip is one of the options in 2004.
Mario

How to create a control with two terminals?

Hi there!
I need to create a control that has got to terminal in the diagram window. The terminal must not be connected to each other by wire but the both must respond to the control instruction the same way. Is that possible to be done?
Thanks
Tiano

Hi,
Are you speaking about "clusters"?
Cluster is the object which may include several different controls inside. For example one numeric and another is boolean (or any other types).
To create cluster on the front panel goto "Controls->Array&Cluster and choose cluster. Then to fill it with elenents simply take any other control and place it inside the cluster.
To read data (on block diagram) stored in different elements you must use "unbundle" or "unbundle by name" functions from "Functions->Cluster" palette.
You can get more info from help file.
Good luck.
Oleg Chutko.

Creating Dynamic Controls with Drag-n-Drop

I'm creating an application that allows users to drag bubbles
from a panel on the left and drop them on a central workspace. I've
already coded the drag-n-drop operations for this process, and it
all works just fine. The user can drag one bubble (which represents
a category) and when dropped, a new similar control gets created at
the mouse coordinates. However, what I can't figure out how to do
is create that new control with dragEnter and dragDrop properties
of it's own. Obviously, if I was creating this control ahead of
time, then I would specify those events in the XML portion, but I'm
creating the control dynamically, so I have to figure out some way
to set that up. Something like...
var newBubble:Canvas = new Canvas();
newBubble.height = 50;
newBubble.width = 100;
newBubble.x = target.mouseX - xOffset;
newBubble.y = target.mouseY - yOffset;
newBubble.dragEnter = "doDragEnter()";
newBubble.dragDrop = "doDragDrop()";
However, when creating new controls, the dragEnter and
dragDrop properties aren't available. Any suggestions as to how I
can do this?

Thank you sooo much! I'll try it out immediately. I knew it
had to be something simple...

Problem while creating Table control with wizard

Hi All,
I am using the table control wizard.
Following is the declared data :
TYPES: BEGIN OF test_str,
        name TYPE string,
        city TYPE string,
      END OF test_str.
DATA: lt_str TYPE STANDARD TABLE OF test_str,
      ls_str TYPE test_str.
I activated the program after declaring this..
then I created a screen.
while generating the table control , i give the internal table name as lt_str and work area as ls_str(both of these are also coming in F4 help) , i am getting the following error :
the table work area ls_str does not exist or is not a structure.
Please help.
Regards
Panneer

HI Selvam
In the wizard please choose the radio button internal program table. I hope you might have choosen the dictonary table.
And activate the program before generating the wizard.
Please try this and let me know if any issues.
Thanks
Praveen
Edited by: Praveen Kumar on Feb 4, 2010 4:34 AM

Problem in Tabstrip Control

Hi All,
i had created an Custom Infotype.
In that infotype i had created Tabstrip control with 2tabs.
Each Tab contain 4 fields.
When creating( F5) a record in transaction PA30, it allowing me create a record and the record is available in Data base table.
1. My doubt is, when Display the Record through F7 and Change mode (F6), Still the fields are in editable mode. But not in Display Mode ( Editable Mode ).
How to Disable the Fields for this Tab Strip Control. I have not used any Group Field for this. Can we need to Main tain anything.
But SAVE option is automatically disabled.Iam not able to SAVE when i press F7 but in Editable is the My Problem.
2. And one more query is, when press F5 or F6 or F7 it is show the following message at End screen,i.e.
Protected tab titles are not supported (tab MENU_TABSTRIP title PUSH1) . But MENU_TABSTRIP is My Tab Strip control text Name and PUSH1 is my Tab1 , Function code.
How to remove this message.
Points will be rewarded.
Thanks,
N.L.

Hi,
Try this ....In the Table Control, double click on a field. In the attributes make that field as output only...
Hope it helps,
Swathi

Steps to create tabstrip for subscreen in selection screen

hi,
can let me know the steps taken to create subscreen in selection screen and put in tabstrip?
i need to have 3 screens. 1000 being the tabstrip, 2000 being first subscreen and 3000 being the second subscreen.
i have the abap code but i do not know the steps to create especially 1000 screen.
for 2000 and 3000, once i activated the program, these 2 screens added but i do not know where can i create the 1000 screen.
also, should i use wizard to create tabstrip?
please advise. thanks
SELECTION-SCREEN BEGIN OF SCREEN 2000 AS SUBSCREEN.        SELECTION-SCREEN BEGIN OF BLOCK x WITH FRAME TITLE text-001.
SELECT-OPTIONS: para1 FOR field1 ,
                              para2 FOR field2.
SELECTION-SCREEN END OF BLOCK x.
SELECTION-SCREEN END OF SCREEN 2000.
SELECTION-SCREEN BEGIN OF SCREEN 3000 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK y WITH FRAME TITLE text-002.
SELECT-OPTIONS: para3 FOR field3 ,
                              para4 FOR field4.
SELECTION-SCREEN END OF BLOCK y.
SELECTION-SCREEN:SKIP.
SELECTION-SCREEN END OF SCREEN 3000.

e_l,
See the total doc.. with example.
Assigning a Subscreen Area to a Tab Title
You must assign a subscreen area to each tab title. There are two ways of doing this:
Paging in the SAPgui
You need to assign a separate subscreen area to each tab title, and define the function codes of the tab titles with type P (local GUI function). In the screen flow logic, you call all the subscreens in the PBO event. This means that all of the tab pages reside locally on the SAPgui.
When the user chooses a tab title, paging takes place within the SAPgui. In this respect, the tabstrip control behaves like a single screen. In particular, the PAI event is not triggered when the user chooses a tab title, and no data is transported. While this improves the performance of your tabstrip control, it also has the negative effect that when the user does trigger the PAI event, all of the input checks for all of the subscreens are performed. This means that when the user is working on one tab page, the input checks may jump to an unfilled mandatory field on another page.
Local paging at the SAPgui is therefore most appropriate for screens that display data rather than for input screens.
Paging on the Application Server
One subscreen area is shared by all tab titles and called in the PBO event. You define the function codes of the individual tab titles without a special function type. When the user chooses a tab page, the PAI event is triggered, and you must include a module in your flow logic that activates the appropriate tab page and assigns the correct subscreen to the subscreen area.
Since the PAI event is triggered each time the user chooses a tab title, this method is less economical for the application server, but the input checks that are performed only affect the current tab page.
Procedure in Either Case
You create the subscreen areas within the tabstrip area. You assign the subscreen areas to one or more tab titles in the Screen Painter by selecting one or more titles. You can also assign a subscreen area to a tab title in the tab title attributes by entering the name of the subscreen area in the Reference field attribute.
The procedure for the alphanumeric Screen Painter is described under Creating Tabstrip Controls.
If you are paging at the SAPgui, create a subscreen area for each tab title. If you are paging at the application server, select all tab titles and create a single subscreen area. The subscreen areas may not cover the top line of the tab area. However, within a tab area, more than one subscreen area can overlap.
Programming the Flow Logic
In the flow logic, all you have to do by hand is include the correct subscreens. The screen flow and data transport to the ABAP program is the same as for normal subscreens. There are two ways of programming the screen flow logic, depending on how you have decided to page through the tabstrip control.
Paging in the SAPgui
When you page in the SAPgui, you must include a subscreen for each subscreen area:
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN: <area1> INCLUDING [<prog 1>] <dynp 1>,
                  <area2> INCLUDING [<prog 2>] <dynp 2>,
                  <area3> INCLUDING [<prog 3>] <dynp 3>,
PROCESS AFTER INPUT.
CALL SUBSCREEN: <area1>,
                  <area2>,
                  <area3>,
Paging on the Application Server
When you page on the application server, you only have to include a subscreen for the one subscreen area:
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN <area> INCLUDING [<prog>] <dynp>.
PROCESS AFTER INPUT.
CALL SUBSCREEN <area>.
Handling in the ABAP Program
Before you can use a tabstrip control in your ABAP program, you must create a control for each control in the declaration part of your program using the following statement:
CONTROLS <ctrl> TYPE TABSTRIP.
where <ctrl> is the name of the tabstrip area on a screen in the ABAP program. The control allows the ABAP program to work with the tabstrip control. The statement declares a structure with the name <ctrl> . The only component of this structure that you need in your program is called ACTIVETAB.
Use in the PBO event
Before the screen is displayed, you use the control to set the tab page that is currently active. To do this, assign the function code of the corresponding tab title to the component ACTIVETAB:
<ctrl>-ACTIVETAB = <fcode>.
When you page at the SAPgui, you only need to do this once before the screen is displayed. This initializes the tabstrip control. The default active tab page is the first page. After this, the page activated when the user chooses a tab title is set within SAPgui.
When you page on the application server, you must assign the active page both before the screen is displayed for the first time, and each time the user pages. At the same time, you must set the required subscreen screen.
You can suppress a tab page dynamically by setting the ACTIVE field of table SCREEN to 0 for the corresponding tab title.
Use in the PAI event
In the PAI event, ACTIVETAB contains the function code of the last active tab title on the screen.
When you page in the SAPgui, this allows you to find out the page that the user can currently see. When you page at the application server, the active tab page is controlled by the ABAP program anyway.
The OK_CODE field behaves differently according to the paging method:
Paging in the SAPgui
When you page in the SAPgui, the PAI event is not triggered when the user chooses a tab title, and the OK_CODE field is not filled. The OK_CODE field is only filled by user actions in the GUI status or when the user chooses a pushbutton either outside the tabstrip control or on one of the subscreens.
Paging on the application server
If you are paging at the application server, the PAI event is triggered when the user chooses a tab title, and the OK_CODE field is filled with the corresponding function code.
To page through the tabstrip control, you must assign the function code to the ACTIVETAB component of the control:
<ctrl>-ACTIVETAB = <ok_code>.
This statement overwrites the function code of the last active tab page with that of the new tab title. At the same time, you must ensure that the correct subscreen is inserted in the subscreen area.
Otherwise, tabstrip controls are handled like normal subscrens in ABAP programs, that is, the ABAP program of a subscreen screen must contain the dialog modules called from the flow logic of the subscreen.
Examples
Tabstrip control, paging at SAPgui
REPORT DEMO_DYNPRO_TABSTRIP_LOCAL.
CONTROLS MYTABSTRIP TYPE TABSTRIP.
DATA: OK_CODE TYPE SY-UCOMM,
      SAVE_OK TYPE SY-UCOMM.
MYTABSTRIP-ACTIVETAB = 'PUSH2'.
CALL SCREEN 100.
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE USER_COMMAND INPUT.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
IF SAVE_OK = 'OK'.
    MESSAGE I888(SABAPDOCU) WITH 'MYTABSTRIP-ACTIVETAB ='
                                  MYTABSTRIP-ACTIVETAB.
ENDIF.
ENDMODULE.
The next screen (statically defined) for screen 100 is itself. It has the following layout:
The screen contains a tabstrip area called MYTABSTRIP with three tab titles PUSH1, PUSH2 and PUSH3. The function codes have the same name, and all have the function type P. One of the subscreen areas SUB1 to SUB3 is assigned to each tab title. The pushbutton has the name BUTTON and the function code OK.
In the same ABAP program, there are three subscreen screens 110 to 130. Each of these fits the subscreen area exactly. The layout is:
The screen flow logic for screen 100 is as follows:
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
CALL SUBSCREEN: SUB1 INCLUDING SY-REPID '0110',
                  SUB2 INCLUDING SY-REPID '0120',
                  SUB3 INCLUDING SY-REPID '0130'.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
CALL SUBSCREEN: SUB1,
                  SUB2,
                  SUB3.
MODULE USER_COMMAND.
The screen flow logic of subscreens 110 to 130 does not contain any module calls.
When you run the program, a screen appears on which the second tab page is active, since the program sets the ACTIVETAB component of the structure MYTABSTRIP to PUSH2 before the screen is displayed. The user can page through the tabstrip control without the PAI event being triggered. One of the three subscreens is included on each tab page.
When the user chooses Continue, the PAI event is triggered, and an information message displays the function code of the tab title of the page that is currently active.
Tabstrip control with paging on the application server.
REPORT DEMO_DYNPRO_TABSTRIP_LOCAL.
CONTROLS MYTABSTRIP TYPE TABSTRIP.
DATA: OK_CODE TYPE SY-UCOMM,
      SAVE_OK TYPE SY-UCOMM.
DATA NUMBER TYPE SY-DYNNR.
MYTABSTRIP-ACTIVETAB = 'PUSH2'.
NUMBER = '0120'.
CALL SCREEN 100.
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE USER_COMMAND INPUT.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
IF SAVE_OK = 'OK'.
    MESSAGE I888(SABAPDOCU) WITH 'MYTABSTRIP-ACTIVETAB ='
                                  MYTABSTRIP-ACTIVETAB.
ELSE.
    MYTABSTRIP-ACTIVETAB = SAVE_OK.
    CASE SAVE_OK.
      WHEN 'PUSH1'.
        NUMBER = '0110'.
      WHEN 'PUSH2'.
        NUMBER = '0120'.
      WHEN 'PUSH3'.
        NUMBER = '0130'.
    ENDCASE.
ENDIF.
ENDMODULE.
The statically-defined next screen for screen 100 is itself, and its layout is the same as in the above example. However, the function codes of the three tab titles have the function type <blank> and they all share a single subscreen area SUB.
The same subscreen screens 110 to 130 are defined as in the last example.
The screen flow logic for screen 100 is as follows:
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
CALL SUBSCREEN SUB INCLUDING SY-REPID NUMBER.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
CALL SUBSCREEN SUB.
MODULE USER_COMMAND.
In this example, the program includes a subscreen screen in the subscreen area SUB dynamically during the PBO event.
The screen flow logic of subscreens 110 to 130 does not contain any module calls.
This example has the same function as the previous example, but the paging within the tabstrip control is implemented on the application server. Each time the user chooses a tab title, the function code from the OK_CODE field is assigned to the ACTIVETAB component of structure MYTABSTRIP. At the same time, the variable NUMBER is filled with the screen number of the subscreen that has to be displayed in the subscreen area SUB of the tabstrip control
Pls. reward if useful

Calling Subscreen using tabstrip control

Hello all,
I need to create a tabstrip with 2 tabs.
when i click on the first tab i need to have 4 fieldnames from EKKO.
when i click on the second tab i need to have 2 fieldname from EKPO
I have created a Tabstrip control with 2 tabs.
Subcreen area is also created in this tabstrip control.
And i have created 2 subscreens for the 2 tabs.
but i am not able to call the subcreens.
Can someone tell me how to do this.
Thanks
Harish

Hi Harish,
Chekc this
Calling subscreen in tabstrip
hope it helps.
Thanks!

Tree control with Nodes in ALV

Hi ABAP Gurus,
I am trying to create tree control with nodes in ALV. I have referred to standard BCALV_TREE* programs but new to OO programming. Not sure as to how I can display my internal table data than the SFLIGHT information in these programs. Can you please let me know how this can be done or if I can use any ALV function modules for the node display.
thanks,
Chaitanya

Maybe you could use this. Call this VI from a Value Change event of the tree.
Attachments:
Check_Tree_Items.vi ‏28 KB

Regarding icon in tabstrip control

Hi Friends,
I've designed a tabstrip control with 3 tabs.In each tab, I'm populating different data in ALV format.I've used a custom container for the same.Now I've a requirement from business side that if any of the tabs is having the data, some icon should be displayed alongwith the name of the tab (may be ICON_OKAY). If there is no data in the tab, then no icon should be displayed.
Please advise me in detail as how to do this.Is there any standard functionality or method available for the same.
Thanks in advance!!!!!

Hi,
I dont think we can control icon on tabs dynamically. May be the below links will be useful to find the alternatives / solutions.
[Tabstrip controls|http://help.sap.com/saphelp_nw04/helpdata/en/17/5bf1b52ba211d2954f0000e8353423/frameset.htm]
[Tabstrips|http://help.sap.com/saphelp_sm32/helpdata/EN/d1/801bd2454211d189710000e8322d00/content.htm]
http://www.sapdesignguild.org /resources/icon_cookbook/icon_cookbook.pdf
Statically if you want to attach then you can use : Screen painter: attributes for the TAB2.
Regards,
~Satya
Edited by: Satya suresh Donepudi on Mar 28, 2009 8:31 PM

Tabstrip control issue, screen freezes

I have a Screen with a tabstrip control with 4 tabs. It will let me select tab 1, tab 2, tab 3, and tab 4, but when tab 4 is selected, and i click another tab, the screen freezes, and will not allow me to get out, what is the problem?

Can you send the code ,may after the tab 4 is selected ,you are not activating the tab or no screen is attached.

How can I create a query with web service data control?

I need to create a query with web service data control, in WSDL, it's query operation, there is a parameter message with the possible query criteria and a return message contains the results. I googled, but cannot find anything on the query with web service. I cannot find a "Named Criteria" in web service data control like normal data control. In Shay's blog, I saw the topics on update with web service data control. How can I create a query with web service data control? Thanks.

Hi,
This might help
*054. Search form using ADF WS Data Control and Complex input types*
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html

"Source not found" Error creating URL Data control with query parameters

Hi,
I have a restful service for which i want to create a URL data control. I am able to create the URL data control successfully when i am not passing any parameters in the Source field. But if i am specifying the parameters in the source field like this Department=##ParamName##, something weird is happening. After giving the param string in the Source field, it asks for default param value to test the url. It tests the url successfully. After that i select XML as the data format in which i am mentioning the xsd like this . "file:///C:/..../something.xsd" . And this is when i am getting the error. "Invalid Connection. The source is not found". I am giving exactly same path for xsd which i gave while creating URL data control without query parameters. Infact i was able to create the URL data control with query parameters successfully till afternoon. after that it started giving me this error all of a sudden. Infact as soon as i was able to create a URL data contol with query parameter successfully, i took a backup of the application before moving further. But even that backup is not working now.
As far as i understand, i dont think there will be any change in xsd if query params are passed to a web service. Please correct me if i am wrong.
Just dont know what could be the issue. Please help
Thanks

Hi,
xsd is used for the URL service to know what the returned data structure is so it can create the ADF DC metadata
Frank

Can I create a PDF with form controls using JAVA?

I have a web site running on linux (Ubuntu). I'm programming in Java. Presently I use open office to create PDFs with form controls (checkboxes, lists and text fields). I'd like to be able to create in my program (Java) with form controls. JasperReports is not good because I don't see a way to create form controls. Help!!!

I am not sure what this has to do with the Acrobat SDK, as we don't have a version of SDK for Linux (or Java).

Creating TabStrip control with VisualComposer

Similar Messages

Maybe you are looking for