Creating Transfer Order using LT03
Hi All,
Can anybody send me steps to create Transfer Order using LT03. I'm a technical guy and dont know how to create this.
Should I have outbound delivery to create TO using LT03?
Thanks n Advance.
I'm new on SAP. What is BAPI?
Thanks for your answer.
Regards,
Aurélie
Similar Messages
-
How to pick additional delivery quantity after creating Transfer Order .
Hi
Sales order has been created for 30 pc of material , with reference to this sales order , delivery has been created .Afterwards I created transfer order in lt03 and got it confirmed in LT12. However , PGI has not been carried out .
Afterwards , I went to VL02N and manually increased the materialsu2019 quantity to 60 pc in delivery .
In delivery packing status is partially picked .
I request you to help me how can I pick another 30pc as already transfer order has been created and confirmed for this delivery .
Either system is not allowing me to cancel transfer order in order to create fresh transfer order to with reference to this delivery . Otherwise , I could have done it .
Could you please suggest me , how to go about it .Hi
There is an excellent way to handle your issue
While creating TO in t code LT03 in the initial screen control tab if you give pick quantity as 2 after the TO creation the system will simultaneouslely do PGI also in a single shot
This means the delivery quantity cant be changed in the VL02N
The whole VL02N will be display mode fully greyed out
That means after TO you cant change the delivery
If extra qty has to be added then it has to be a separate order only
I have practised this only and for the past two hrs i was breaking my head how come you are changing delivery after TO creation and for me it was in display mode(fully greyed out) even in VL02N and i found out i am using adopt pick qty as 2 in the initial screen of LT03 which does PGI in a single shot
This should be a good solution for you
Even the solution suggested by Mr.Raj Malhotra you will face the same problem
Regards
Raja -
Anyone used BAPI/FM for LT03 create transfer order
Hi all,
Has anyone used BAPI/FM for <b>LT03</b> create transfer order based on delivery.
the BAPI/FM should accept <b>multiple line items for individual storage units</b>.
thanks,
Subbathanks Amit....
But it would be helpful to know the usage of this FM....and if anyone has used in their program....
thanks,
Subba -
Create Transfer Order inbound using an Idoc
Hi all,
I need some help on solving the error message- In our senario we want to send an Idoc (Create Transfer order ) from external system to SAP. Hence i have done mapping for the idoc but everytime i process the idoc- it comes with an error the storage location missing or incorrect.
Settings i have done is
used WMTORD message typ idoc
E1LTORH- B requirement type
4xxxxxx- PO number
101 - mvt type
Gxx - warehouse number
TAPOS 1 Transfer order item
MATNR 002xxxx Material Number
WERKS Gxx2 Plant
LETYP E1 Storage Unit Type
VLTYP 902 Source Storage Type
VLBER 001 Source storage section
VLPLA 4544000514 Source Storage Bin
VSOLM 300 Source target quantity in stockkeeping unit
NLTYP 001 Destination Storage Type
NLBER 001 Destination storage section
NLPLA 01 Destination Storage Bin
NSOLM 300 Destination target quantity in stockkeeping unit
VLENR 00000000001000000445 Source storage unit number
LGORT 2001 Storage Location
VBELN 425001423 Delivery
any help is welcomed. thanks
Jasmeetthanks for the reply,
But omzk is no transaction, however when I try to do create a transfer order using transaction LT03 it works fine and also the document gets osted with movement type 101. so i need to replicate this in an idoc which i am not able to do as i keep getting error message missing storage location or incorrect -
LT03 - create transfer order (SAP retail)
Hi,
when I process a transfer order with LT03, system replies with the message:
Article X doesn't exist or is not activated
How can I solve this problemHi,
when I try ro create WM1 and WM2 views for that material/article with MM01 trx, the system doesn't show
any entry related to Warehouse number and there's not any customizing entry about Warehouse management.
Do you agree that It must be customized the Warehouse management and then create in material master
WM1 and WM2 views ?
Yours truly -
Create Transfer Order w/Ref to Material Document using L_TO_CREATE_TR
In SAP I can use trans code LT06 to create a WM transfer order using the GR (material document) - number - no issue here,this works great. Now I'm trying to use a BAPI for the same process. I'm using function L_TO_CREATE_TR, but when I execute the function, I get an error that my TR does not exist. I read other threads that say that this is the function for LT06, but it doesn't seem to work for the proces I described above, I first have to create the transfer requirement using L_TR_CREATE, then execute L_TO_CREATE_TR in order for this work. I have filled in the import parameters correctly. When I run this through standard SAP transaction, I do not have to create TR first. Any ideas? I'm on a 4.6C system
Thanks in advance for your replies.
Kathy
Edited by: Kathleen Phillips on Dec 20, 2007 9:46 PM
Edited by: Kathleen Phillips on Jan 2, 2008 4:23 PMDear Kathleen,
I have this same question, have you had any luck resolving this issue? -
Creating Transfer Order for a Material document
Hi,
I am transferring the Unrestricted stock from one material to another material through Movement type 309.
I am creating a material document through BAPI_GOODSMVT_CREATE. Once the Material document is created and if the stock is in multiple storage types or storage bins, then I need to perform LT06. Instead of doing BDC recording I am using L_TO_CREATE_MULTIPLE function module for creating the TO. I am passing all the necessary values to this FM. TO is getting created but the Material document is not reflecting in that TO.
As per the configuration, movement type 309 will create the posting change only not the Transfer Requirement.
Does anybody have encountered the same problem?. If so please let me know how you have resolved the issue.
Regards,
Kishore.Hello Kirankumar,
It is possible to assign external number ranges for Storage unit, so maintain storage unit number range to assign SU number externally.
Now when you create Transfer order for material document at that time you can assign SU number externally.
Hope this helps.
regards,
Arif Mansuri -
Error While creating Transfer Order
Hi all......
Im trying to create Transfer Order with ref. to Transfer requirement in LT04, and getting the following error.
"This screen is only allowed for manual transfer orders".
Can any one tel which transaction I hve to use ? And I need User manuals for WM transactions.
Thanks n Regards
DurgaHello,
May I add something to the discussion.
If you are calling "OMLJ", you see on the left side the secion "Transfer requirements". If the box for "Manual TO creation not allowed" is ticked, you are not able to create the TO's by the manual transactions. Then only the system is allowed to create the TO's, for instance with the report RLAUTA10.
I hope this anweres your question.
Best regards
Uwe Neuman -
Error message while creating transfer order
Hi Experts,
My objective is to create a transfer order from a transfer requirement programatically.
I am trying to create a transfer order using FM L_TO_CREATE_TR programatically. Prior to this FM, I am calling FM L_TR_CREATE to create a transfer requirement. I am passing this transfer requirement to FM L_TO_CREATE_TR to create a transfer order.
But on execution of L_TO_CREATE_TR , I am getting an error message: THIS SCREEN IS ONLY ALLOWED FOR MANUAL TRANSFER ORDERS as a status message in the program.
Please tell how to solve this.
Thanks,
Sangeeta.Hi,
Check whether following link is helpful
http://sap.ittoolbox.com/groups/technical-functional/sap-log-wm/lt04-from-lb01-1239928
Regards,
Dhana -
BAPI - Goods receipt and then create transfer order for a production order
Hello Everyone
We need to do goods receipt and then create transfer order for a production order (Material for WM scenario)
We are using BAPI 'BAPI_GOODSMVT_CREATE'
i_items-orderid = wa_afpo-aufnr .
i_items-order_itno = wa_afpo-posnr.
i_items-mvt_ind = 'F'.
i_items-stge_loc = wa_afpo-lgort.
i_items-stge_type = '901'. "wf_styp.
i_items-stge_bin = wf_sbin.
i_items-entry_qnt = wf_qty.
i_items-entry_uom = wa_afpo-meins.
i_items-entry_uom_iso = wa_afpo-meins.
i_items-batch = wa_zmobtag-charg.
i_items-move_type = '101'.
i_items-move_reas = wl_3131.
We are passing i_items (like line of goodsmvt_item) along with other parameters to BAPI and its creating material document and Transfer order automatically. Problem is the TO created is showing destination storage bin as default storage bin( from material master).
The field goodsmvt_item-stge_bin is just changing the Source bin details. There is no field for bin in the BAPI so that we can change the Destination storage bin as per our requirement.
My requirement : Creating material doc and then TO. Material should move to specified storage bin.
Please let me know any alternate way( No BDC) so that my requirement is achieved.
Regards
SwetabhHi ,
can u check these fields ,
STGE_TYPE_PC UBTYP CHAR 3 0 Storage type for transfer posting
STGE_BIN_PC UBPLA CHAR 10 0 Storage bin for transfer posting
Regards
Prabhu -
Creation of Stock transfer order using BAPI
Dear Gurus,
I was trying to create Stock transfer order using BAPI function
BAPI_PO_CREATE
though i have defined Bsart as 'UB'
still it gives message :
" No master record exists for vendor MOH1 "
Please show me path fwd.
Thanks and Regards
Gaurav soodDear all,
Issue Resolved
thanks -
FM/BAPI to create Transfer Order(TO) with reference to TR or Material Doc.
Hi,
I am in need of Function module or BAPI to Create Transfer Order(TO) with reference to Transfer Requirement(TR) or Material Document.Hi,
Please try any of the below,
1.Look at function group L03B (Transfer order processing)
2.Use L_TO_CREATE_TR
3.BAPI_GOODSMVT_CREATE set:
GOODSMVT_ITEM-STGE_TYPE_PC = destination storage type or GOODSMVT_ITEM-STGE_TYPE_ST = destination storage type
4.Look at fm L_TB_VERAENDERN. This isn't RFC, but you might copy fm into ZL_TB_VERAENDERN and set RFC on.
Hope this helps.
Thanks,
Harini -
Creation of transfer orders using reservation
Hi,
We have requirement to create a transfer order against goods movement reservation. In standard SAP, the transfer orders get generated only after posting goods issue for reservation. However, we need to create transfer orders first so that we can print the pick list first and the post the goods issue against those reservations.
I know this is possible for outbound delivery. However, I have tried all ways to do this for reservation and could not find solution.
Please help.
Thanks,
-Shekhari have a similar requirement. I have not come across any solution to it in Standard. Then i opted for ABAP. Found a BAPI for the creation of TR and TO. the better option is the creation of TR rather then creation of transfer order. the user will be confirming the source storage bin where as the destination storage bins will be assigned based on the movement type.
Once we have the movement type in reservation, we will create a transfer requirement with the respective requirement type. Destination storage bin will be defined by the movement type (or based on any configuration that you may have done).
this will be used to create a transfer order where the user will be able to opt for the source storage bin.
Hope this will be of any advantage to you. -
Create Transfer Order for Consingment Pick up
Hey, is there anyone know how to create transfer order for consignment pick up.
I had tried it using LT06 by using GR material document but it didnt work.
Please i need the answer rather sooner than later.
ThanksHello,
Customer consignment pick is from customer consignment stock back to plant stock.. First of all check in MMBE whether stock exists for that material under customer consignment stock. You can check this in MMBE.
Your stock should be maintained in customer consignment and not in interim storage type.
Ideally your process shall flow like this
Sales order (KA-Consignment Pick up with item category as KAN & schedule line category: F0 & F1)>>Enter the order reason, material and quantity in sales orde & Save It>>Create Outbound delivery (VL10B/VL01N)>>Now Create Tranfer order to move the stock from consignment to warehouse stock>>Go to VL02N Choose from menu Subsequent Functions u2013 Create Transfer Order & Enter>>Add Storage bin if required>>Confirm the transfer order (LT12)>>Do the Post Goods Reciept (VL02N)
Now Check Consignment stock quantity with MB58 Add Material , Plant , Customer Execute
BR,
Tushar -
Creating sales order using ' BAPI_SALESORDER_CREATEFROMDAT1'
Hi ,
i have a problem in creating sales order using ' BAPI_SALESORDER_CREATEFROMDAT1 ' .
order number is created and every thing unless the order quantity isn't created for material item .
my inputs are .
in "ORDER_HEADER_IN"
(DOC_TYPE , SALES_ORG , DISTR_CHAN , DIVISION ,SALES_OFF )
in " ORDER_ITEMS_IN"
(MATERIAL ,PLANT ,REQ_QTY )
in "ORDER_PARTNERS"
(PARTN_ROLE , PARTN_NUMB)
so the order created but as i say the the order quqntity isn't created for the material so the "net value and maertial net valve )
aren't calcoluted .
<< Moderator message - Everyone's problem is important. But the answers in the forum are provided by volunteers. Please do not ask for help quickly. >>
waiting .
thanks for all
Edited by: Rob Burbank on Jan 7, 2011 4:28 PMHi Mr. Ahmed Tohamy,
my point is just create a schedule line with each item line. The relevant code we used was (excerpt)
perform bapi_map_filled using:
lv_matnr 'MATERIAL' space
changing ls_in ls_inx,
lv_tax_class1 'TAX_CLASS1' gc_true
changing ls_in ls_inx,
lv_qty 'TARGET_QTY' space
changing ls_in ls_inx, "QTY to item line
lv_qty 'REQ_QTY' space
changing ls_schdl ls_schdlx,"QTY to schedule line
lv_itm_number 'ITM_NUMBER' space
changing ls_in ls_dummy,
lv_itm_number 'ITM_NUMBER' space
changing ls_schdl ls_dummy,
lv_ref_doc_ca 'REF_DOC_CA' space
changing ls_in ls_inx,
lv_orderid 'ORDERID' space
changing ls_in ls_inx,
lv_ref_doc 'REF_DOC' space
changing ls_in ls_inx.
append:
ls_in to pt_order_items_in,
ls_inx to pt_order_items_inx,
ls_schdl to pt_order_schdl,
ls_schdlx to pt_order_schdlx.
Here the quantity is put to item line and schedule line, we always mark the correspoing X structure fields:
*& Form bapi_map_filled
* if the value passed is not initial, it is moved to the field
* and the corresponding (BAPI-) X-field is marked
* if no x-structure is required, a dummy structure is passed
* if p_initial parameter is filled, initial fields will be marked
* in x-structure. Purpose: transfer of initial values to BAPI
form bapi_map_filled using p_value type any
p_fieldname type fieldname
p_initial type flag
changing p_structure type any
p_structurex type any.
field-symbols:
<any> type any,
<c> type c.
check:
not ( p_value is initial and p_initial is initial ).
assign:
component p_fieldname of structure p_structure to <any>,
component p_fieldname of structure p_structurex to <c>.
<any> = p_value.
check <c> is assigned.
<c> = gc_true.
endform. " bapi_map_filled
Also, we did something to create conditions (i.e. tax) but I think that was project-specific.
We used BAPI_SALESORDER_CREATEFROMDAT2, I do not know about BAPI_SALESORDER_CREATEFROMDAT1.
Regards,
Clemens
Maybe you are looking for
-
Credit period based credit block
Hello Experts, In one of our client's requirement, the client requires a credit block if the period exceeds 90 days and this is to be configured for one sales area and account group. In short- sales areacredit periodaccount group=credit block. what c
-
IPhone 5 texting/crashing issues
My phone hasn't been able to properly send or receive texts the past two days. Every time I try to make room on it (i.e deleting pics, texts, apps) they all come back for some reason, no matter how many times I go back and try again. I've turned off
-
After Effects CC, CoreAudio and QT32 Server crashes
Hi all, I have been experiencing similar issues to other AE users regarding the Adobe QT32 Server crash problem and have been trying the various solutions posted here on this forum. I am running a MacPro 5,1 10.7.5 with an AJA LHi card using the reco
-
Latest perl module for tuxedo available
The latest version of the Tuxedo perl module uses the C tuxedo api and allows you to write services in perl. It can be downloaded from... http://search.cpan.org/~afryer/Tuxedo-2.08/Tuxedo.pm
-
Why is New to Java so much faster than Java Programming?
It feels like the New to Java server is at my neighbor's house, and Java Programming is on Neptune. What gives? It always takes like 10 seconds to load the Java Programming board.