Creating Transformation in 3.5 Version for a Master DATA Source

Hi ,
Currently i am working in 7 version.
I have Created a new master data info object  Through  a Template from a standard  info object 0Ven_comp.
This Standard Info object 0Ven_comp   already has a data source 0VEN_COMPC_ATTR , where it is getting values.
Now i want to use the same data source for my new info object which is created as template based on the 0ven_comp.
Can anyone please tell me how i can use the same data source  for my new info object and that too i need to create transformation in 3.5 version.

Hi Guru,
You cannot use the same datasource with two different versions.
Either it should be 7.0 or 3.x version.
You can create a copy of datasource and you can replicate it in BI system.
Regards,
Rajesh

Similar Messages

  • How to maitain Deltas for generic master data source

    Hi Friends,
    I created a view using MARA and MARC table. This view fields maitained by attributes of ZWMAT_PLT Characteristic.
    Now i faced the problem with deltas.
    How i need to maitain delta for above view.
    please give me solution for above problem.
    Thanks & Regards,
    Guna.

    Hi,
    If you have timestamp field in the view it is better use the Timestamp for the generic delta. Else try to include a timestamp field in the view.
    Also check this forum.
    How to set the delta for existing generic data source
    Delta Updating a Master Data Infoobject
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    Assign points if this is helpful
    Rgs,
    I.R.K

  • No transfer rules for FI master data sources

    Hi all
    I didnt get transfer rules for some of the FI master datasources.
    0GLACCEXT_T011_HIER
    0NEG_POSTNG_TEXT
    0ITEMSELFLG_TEXT
    When I right click on datasource->create transfer rules->Only other option is enabled.WHen I say continue I am getting this error
    *Infosource(transaction data) is not known.
    How to resolve this isssue.
    Thanks.

    Double click on the data source and go to edit mode, system automatically provides the corresponding BI content infosources if  any and install the same.
    Not all the fields will be mapped with BI info objects.  Only necessary ones as defined in BI content will be available for you.
    If you feel the mapping is incomplete you can modify the same according to the requirement.
    Hope this helps.
    Regards,
    Rangz

  • Need to create a Store Business document type for material master and store a sharepoint link

    Hello,
    I need to create a Store business document type for material master and store a URL link . How do I do that?( or is there any functionality to upload a document for a  store business document that it will automatically saves to sharepoint?)
    Thanks,
    Ran.

    >
    dhayes12 wrote:
    > A)  When I do the (Material Backflush) MFBF for the 04 type, the Inspection Lot gets created OK.  I then can go into QA32 and assign the correct Inspection Plat by clicking the Inspection Lot button.
    >
    > B)  When I do the MIGO via the Purchase Order (type Z01), it will not create the Lot if I have the Multiple Specs selected in the QM Material Master MM02.  If, I turn off the Multiple Specs in the QM Material Master and create a new PO and MIGO, it will create the Lot, however, it automatically assigns the lot to the wrong Inspection Plan (2nd Plan see above)  I need to be able to select the plan like I can with the 04 type.
    >
    > Is their some setting that can be changed in Config or somewhere that acts the same way as example A above?
    For case A, create insp plan with usage "1- production" If you have one IP with this usage for given material then system will assign Plan to lot automatically. In your case for second plan update usage as 1.
    For case B, system should assign 1st plan make sure for both plan udage is correct. for 1st plan usage should be 5 while 2nd plan usage should be 1. Now if your 1st have status 4 and key date before lot date then system will assign plan auto.
    Thanks!!!

  • How Delta is enabled for all STD Data source?

    Hi All
      I have a weird qns. cropping most of the time. .For generic, naturally you set and create Funtion module to enable the DELTA..
    Where as dont know how to see DELTA enable setting for TIMESTAMPS in the STANDARD Datasource...?
    Can anyone help how to find for every datasource and also when we enhance the data source how do you go and change the settings or where to check the delta TIMESTAMP settings?
    pls give possible step by step and clear answers to inderstand easily.

    Hi ,
    As per my knowledge
    Delta records are directly selected from the R/3 tables using a timestamp mechanism from Timestamp table BWOM2_TIMEST.
    Delta records are directly transferred to BW and no record is written to the BW delta queue.
    when we have a delta dataset selected successfully, the SAP R/3 system logs two time stamps that delimit a selection interval for a DataSource in table BWOM2_TIMEST in fields AEDAT ,AETIM  ,TS_LOW ,TSS_HIGH.
    Table BWOM2_TIMEST serves as a document for loading history from R3. It also provides defined restart points following incorrect data requests.BWOM2_TIMEST is a standard ABAP report available in SAP.It provide the functionality of resetting of the date time of last Delta or Init Extraction from an OLTP system.
    ROOSGENDLM is also a standard SAP table available within R/3 SAP systems depending on our SAP version and release level. It stores the delta pointer for each executed Data Source.For the next delta extraction, the delta pointer is therefore extracted from this table and the corresponding delta data is extracted from different DB tables.
    The editing of these tables however is not recommended but they are very helpful when we loose delta because of some reason then we can just change ROOSGENDLM table to desired date and it will bring delta from that date .Very helpful in case of rollback of system .Before that we need to maintain entry fro that data source in BWOM2_TIMEST  .
    Hope this will be helpful .
    Regards,
    Jaya Tiwari

  • How to use LSMW on CRM for bulk master data creation?

    Hello Experts,
    I need your help to able to use LSMW on CRM for bulk master data creation. Below is described my detailed requirement; -
    We have CRM 2007 integrated with SAP ISU (ECC6.0). As per business process all Business Master Data (BP details, Business Agreement details etc) and Technical Master Data (Connection Object, PoD etc.) is created in CRM and then it is replicated in ISU. We are going to start Assembly Test soon. Now we need to have all master data in place. Tool we want to use is LSMW.
    Now can you help me right from scratch on how to use LSMW for bulk master data creation in CRM?
    Please give me documents / links etc that is relevant.
    Regards,
    Rohit

    Hi,
    I have looked into your query.
    These are some information which might be useful to you.
    What is LSMW?
    Legacy System Migration Workbench or LSMW is SAP standard program that can be used to easily load / change master data or transactions in SAP without any programming at all. It can be used to upload data at cutover, such as: open orders, contracts, materials, vendors, stock on hand. It can also be used in a production system to make changes to existing data. Very limited authorization checks are available on the transaction, so the use of it must be very well controlled.
    One input file can be used to create all the views of the material master. For all the material types. Even if different views and fields are used for the different materials.
    Steps to take
    1. Create text file with data to be loaded
    2. Set up and run LSMW
    The following link will provide good information on LSMW Idoc method:
    [http://help.sap.com/saphelp_nw04/helpdata/en/ad/2d54a41d7011d2b42e006094b944c8/frameset.htm]
    I hope this helps.
    Regards,
    Venkat

  • Change Message Control for Customer Master data

    Hi Friends,
    I have to choose/populate a message when the user is about to create an already existing customer.
    In SPRO --> Financial Accounting --> Accounts Receivable and Accounts Payable --> Customer Accounts --> Master Data --> Preparations for creating customer master data --> "change message control for customer master data" ...
    OK...
    When u click this it goes into Change View "message control by User" Overview screen wherein u can insert new messages and texts and the type of message ....
    Now .....
    I want to display the 145th message (F4 help of the Message column) ..... it picks up the text "Customer found with same address;check"..... with Online mesasage type 'I' and batch type 'I' and with standard type '-' ..
    I want to have the same message with message types 'E','E', and 'I' respectively.......
    How is this possible (or) what should i do to meet my requirement :-|
    Expecting ur answers
    Thanks in advance ........
    Cheers,
    R.Kripa.

    Hey yes it is not possible (as of now
    I ve met the requirement by just using message statement in the program itself ............
    My requirement is met but still if anyone knows about this do answer / reply
    Thanks
    Cheers,
    R.Kripa.

  • Match code for Vendor Master Data on PAN

    Hi
    Vendor match code will work only if the name are identical. But for the same vendor, user create multiple vendors.
    For Ex: If the vendor name is ABC Private Limited, User puts different names like ABC Pvt Ltd, ABC P Ltd, etc.
    Hence the match code check is over ridden.
    For that reason, i want check on the basis of PAN number.
    There is no field for PAN number in match codes field.
    Please suggest how it can be maintained

    Hi ,
    Use the exit SAPMF02K , which is specially ment for vendor master data .
    Cheers ,
    Dewang

  • Export and import change document for user master data

    Dear Gurus,
    I have two queries on change document for user master data:
    1. Are there any approaches to export and import change document for user master data?
    We often do system copy from PRD to QAS for UAT and troubleshooting. Before system copy we export the user master data from QAS and then import after the copy process. We would like to keep the change document for user master data on QAS from being refreshed from PRD for security reason.
    2. Change document for Role change in QAS
    When the role is created or modified in DEV and then transported to QAS, the role change document doen't include this change log. The role change document in QAS only records those role changes directly made in QAS.
    Could you advise this is by SAP design or are there any approaches to record this transported role change  in the role change document in QAS?
    Thanks
    YBY

    1. Perhaps you want to consider a system copy to a "virtual system" for UAT?
    2. Changes in QAS (as with PROD as well) will give you the delta. They should ideally be clean... You need to check the source system.
    Another option is to generate the profiles in the target system. But for that your config has to be sqeaky clean and in sync, including very well maintained and sync'ed Su24 data.
    Cheers,
    Julius

  • Classification System for Vendor Master Data

    Can we create Vendor classed as we do for Material Master?

    Hi
    Yes we can do that.
    First create class in CL01 or CL02. class type for vendors is 010.
    Now goto CL24N, enter class and class type. Click on new assignments.
    system will ask you object type. class or vendor. Choose vendor and press enter.
    Enter vendor numbers and save.
    Now goto display or change vendor master data.
    In Menu, click on Environment> classification. automatically class is assigned to vendor

  • Queries for Vendor Master Data

    Hello,
    Does anyone know if there is any standard queries for vendor master data?
    Thanks ans best regards
    Maria Stone

    Nothing standard. You can easily get it though. In the infoprovider right click and insert your characteristic as a Data target. Once done you can then create queries on you characteristice vendor.
    pls assign points to say thanks.

  • Mapping deploy for Non-Oracle Data Source hangs

    Hi All,
    I am trying to deploy mapping for Non-Oracle Data Source and it hangs.
    Oracle version is 10.2.0.3 and OWB version is 10.2.0.1.3.1
    It would be really appreciated if you can help.
    Thanks!
    PS.

    That helpes quite a bit. I still can't get the app to retrieve data, but I am getting a more useful message in the log:
    [Error in allocating a connection. Cause: Connection could not be allocated because: ORA-01017: invalid username/password; logon denied]
    As you suggested, I removed the <default-resource-principal> stuff from sun-web.xml and modified it to match your example. Additionally, I changed the <res-ref-name> in web.xml from "jdbc/jdbc-simple" to "jdbc/oracle-dev".
    The Connection Pool "Ping" from the Admin Console is successful with the user and password I have set in the parameters. (it fails if I change them, so I am pretty sure that is set up correctly) Is there another place I should check for user/pass information? Do I need to do anything to the samples/database.properties file?
    By the way, this is the 4th quarter 2004 release of app server. Would it be beneficial to move to the Q1 2005 beta?
    Many thanks for your help so far...

  • Message Type for Material Master Data Changes

    Hi all
    I'm managing Message Types for Material Master Data extraction from R\3 system to BW system, in order to load on BW only the changes done to some fields of MARA table that are delta relevant.
    Now from R/3 BD50 Transaction I can see that there is a message type that refer to changes done on MARA fields: RS0044.
    I would like to replace this message type with another one (RS0020) in order to align different systems.
    Now changes to material master data in R/3 system are recorder with both message types but only those with RS0044 message type are processed and loaded into BW system.
    So I would like to know:
    1. How is the message type related to the DataSource 0material?
    2. is it possible to replace a message type for BW?
    3. if yes, how can I do it?
    Thanks in advance.
    Elisa
    mail: [email protected]

    Hi Oscar!
    At the moment I'm using Delta queue of 0MATERIAL. I know that in the queue there are all the new and changed records.
    But I would like to be able not to load all the changed records, but only those that refer to some fields of MARA table.
    E.g. if the gross weight of a material is modified I don't want to load this change on BW with Delta loading .
    I've seen that from R/3 Transaction BD52 you can set only delta relevant fields referred to a specific message type and to delete the other fields.
    As I'm able to do this directly in the Development system and Test System, I haven't got the authorization of doing it in the Production system.
    That's why I need to include this setting in a CR and then ask to transport it from Test to Production system.
    But message types referred to MARA field changes are different between the two systems.
    And it seems they are automatically created.
    Is it true?
    Thanks
    Elisa

  • Delta for cubes & master data

    Bonjour,
    I am a bit confused about some concepts of BW. Hope to get clarified here in good ole SDN.
    1. Infocube is said to be ADD only. Yet, its data deletable eg. by request. How do I interpret this? Is it deletable only by requests? How about selectively as detail as single records? How about field level deletion (instead of a whole record)?
    2. Is a 'new' image (rec mode "N") = 'after' image (rec mode " ")?
    3. How is Repair Request compared to Pseudo Delta? Are they both only and must selectively delete by month / time char only? Can either be deleted by single records?
    4. Master data is said to be usually overwritten. How is it so? What Delta type(s) are we talking about by this? How is Master data aggregated? Can it be? What does serialization and duplicate master data processing mean? How can master data prevent duplicates?
    What's the usual and possible practices to manage delta for Master data attr,txt,hier?
    Awaiting your reply.
    best regards,
    Pascal Gabin

    1. Infocube is said to be add only because it is different from ODS or master data where you can 'merge or overwrite' data. When 2 records are loaded into an Infocube, if they are different in any one field, they will be stored as 2 seperate records (in the fact table of the cube). Whereas if 2 records are loaded into an ODS, and the records are similar in terms of the key of the ODS, only 1 record will be created in the ODS with the second records details overwriting the first if there is a clash.
    From a cube you can delete data either selectively by specifying ranges or delete an entire request. You cannot do field level deletions.
    2. No they are different. Let us say there is a record with 2 fields Customer and Amount being loaded into an ODS. First record loaded is (Pascal, 10.00). Then there will be a New-image record (Pascal, 10.00,N). After this a second record (Pascal, 15.00) is loaded. After this there will be 3 records.
    Pascal, 10.00, New Image
    Pascal, -10.00, Before Image
    Pascal, 15.00, After Image.
    All 3 add to 15.00.
    3. Not able to understand your question. Deletion of all requests are I think the same. Selective deletion can be done only for a Infocube not for an ODS. See answer 1.
    4. Master data usually changes very little. For eg, a customer 100013 is always 100013. Once in a while his phone number might change. When it does, it is picked up by the delta and the existing record in BW is overwritten. There is only one type of delta for master data. Not sure of what is the exact name. Master data is aggregated by specifying the key to the master data table.
    The best practice is to maintain delta only for large master data objects (Customers, Materials etc). For all of these SAP has provided delta-enabled datasources which can be used. For the rest, full-uploads suffice.

  • DTP error: Lock NOT set for: Loading master data attributes

    Hi,
    I have a custom datasource from ECC which loads into 0CUST_SALES.  I'm using DTP & transformation which has worked for loading data in the past for this infoobject.  The infopackage loads with a green status but when i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes".  I've tried reactivating everything but it didn't help. Does anyone know what this error means? We're on SP7.   Thanks in advance!

    Hello Catherine
    I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
    The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
    Fix#2: by a faster server (by faster, I mean more CPU power)
    Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
    Good luck!
    Ioan

Maybe you are looking for