Creating transport for PI deleted objects

Hi all,
PI newbie here.
I have deleted an Integration Scenario as it is no longer needed. I can see this in my Change List, along with the CS object from which this has been removed.
How do I get these objects into a transport request?
When I right-click on the CS to activate I get the objects in a Change List and the IS is there but not selected. I assume this is correct and that I smply activate the CS? Please confirm.
PS: once again apologies for newbie question.

Hi Glen,
In transport wizard , check deleted object and your deleted objects will also be available for transport
Note: When you delete any object in ESR / ID , you must activate the change list then only changes will be reflected on PI server / cache
Thanks
Hari.

Similar Messages

Error when creating interval for number range object

Hi,
I am trying to transport my BW stuff from QA to Production and I am getting the following error in the transport logs. The info objects are inactive in RSA1.
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
Characteristic YRESD: Error when creating interval for number range object BIM0000396
Can some body advise me what's wrong? Is something need to be maintained in number ranges?
Also when I am checking the objects in RSA1, I am getting a message saying "source system WD110 does not exist", WD110 is our dev system. How can I change the source system after transport?
Thanks.
Edited by: Raj G on Mar 20, 2008 11:38 AM

Also when I am checking the objects in RSA1, I am getting a message saying "source system WD110 does not exist", WD110 is our dev system. How can I change the source system after transport?
Which system are you checking this?
refer: Re: Transport Source Systems from DEV to Testing for step to map the source systems for transport

Create confirmation for multiple cost objects PO in SUS

Hi,
Is it possible to create confirmation for multiple cost objects PO ( order type 'MA') in SUS ?
We are going to implement SRM 7.
Thanks & regards,
Afandi-

Hi All,
First of all, thanks for your responses..
Right, about the issue, what I explained here was that I am indeed assigning only one cost object: the WBS element. The issue was that even though I am assigning only the WBS element, it was also assigning the cost to the cost center by default. I did some R&D and found the solution to the issue (I was also asked to look for OSS notes but was not satisfied that this issue needs an OSS note to be applied so tried my solution). The issue was in table: T788M (allocate costs to variable account assignment). Here, I created an entry and called it USERGROUP_2 (just a random name) and assigned the variable cost objects (only the WBS and the Cost center) to be displayed. In the next step, I assigned this usergroup to the country in quesion feature (TRVCO). By doing this, I tell the system that only these cost objects are to be considered when an employee wants to assign the cost object. If the system sees that there is no value from the drop down to choose from, it picks up the default cost object (cost center). This was a simple issue that I had to rattle my brains on... but the solution I mention above worked like a hot knife going through butter...
If you guys face this issue, please try this else feel free to get in touch with me on my number below.
Once again, thanks for your responses.
Best regards,
Tanmay Dhingra
+91 880 6666 606

Is there a way to create a transport to mass-delete objects from another system?

I am facing a unique issue where I have to generate a transport that will successfully import into an external SAP system and delete over 1,000 objects (reports, data elements, UI elements, transactions, function groups, the whole lot...). All of these objects can be easily looked up because they are in the same namespace.
Essentially, I need to remove all objects with a given namespace via transport.
Is there any way to do this other than manually deleting all of the objects in the source system and adding them tediously to a single workbench request? This would take hours if not days to do manually, especially due to dependency issues.
Thanks for any and all constructive feedback!

Hi,
I did a quick test: created a new package (development class) with one table, one function group using the table in global data definitions containing one function module referring to the table in interface, and one program that's calling the function module and using table in data definitions. Released the transport to Q.
Then, in the second our dev system, I created the same package and TADIRs for the three objects manually (SM30); released transport to Q of that system. Then I manually created transport containing all the three objects, the export log looked like this:
TADIRs in second dev system were gone after export.
Then I added transport to the first development system and imported
- the objects were gone (including their TADIRs) leaving the empty package.
In retrospect, I should have deleted the empty package in second system so it's cleaned up by the same transport.
If you do have access to "clean" system, doing via ABAP the steps I did manually should not be too much of a challenge.
I may have simply gotten lucky and if this works with all objects, for all kinds of dependencies, remains to be seen... though I was until now under impression that import itself doesn't check any dependencies at all... What kind of messages were you getting?
cheers
Janis

Multiple Transports for the Same Object.

I have ABAP program 123 and I make a change, create transport A and release the transport. I do not request transport A go to production.
I then modify ABAP program 123 again, create transport B and release the transport. I do not request transport B go to production.
Now I request transport A go to production.
Can someone explain to me why the changes in transport B are included when transport A is moved to production?
I thought each transport would be at its own change level.
Thank-you.

I can guarantee all of you that when Transport A was moved, it contained changes that were made in Transport B.
Surely you understand that Thomas is correct and that there's a logical reason, not related to transport layer configuration, for the issue? You CAN have multiple transports open for the same object without a lock by forcing it but check the dates as already suggested...

Can we have multiple transports for the same object.

Hi guys,
Can we have multiple transports for same object in dev system. Can anyone tell me how can this be done.
Thanks

Its not possible for the same development object. Only 1 person can access an object at a time and if mutiple users modify an object new TASKs are created under the same TRANSPORT.
Only after releasing the tr you can create a new tr on the same object.
Message was edited by:
Abhishek Jolly

Capture transport for infoobject delete

we have an infoobject that we need to delete across systems. How do we capture the transport for deleting the infoobject?

I know of two ways to do this. If the info object is still in DEV, delete it and attach that delete to a transport. Move that transport as usual.
If you have already deleted the info object, then you can no longer do this. The only other alternative is to open up the systems and delete the object directly.
Brian

How to create event for BOR BUS2009 Object ?

How to create a new event for BOR BUS2009 Object ?

Hi,
Please create a subtype for BOR BUS2009, say Z_BUS2009 and include your custom characteristic entities like Events, Methods, Key fields etc and finally do delegation. After delegation, all your custom changes reflects in BOR BUS2009.
Regards,
Prasanth

How to create variables for Characteristic Info-objects in Rows / Columns

I want to create variables in abovementioned manner for COPA retraction in BPS, as COPA retraction does not recognise variables created in "filter" section of Bex. Can sumone advise , as I have tried all the possibilities of creating but failed to do so?

Hi Ravi/All,
Actually my problem will be solved if I am able to create variables in either Rows/Columns area of BeX.
Variables are getting created easily in Filter section of BeX (but in COPA , it will not serve any purpose COPA retraction does not recognise contents of Filter/variables contained in the filter).
In fact variables are getting created in Rows/Colums of Bex, but they are in the form of structures. (Again multiple structures (more than 1) are not recognised in COPA retraction.

Logs for checking Deleted Objects

Dear Experts,
Some objects (ODS, Cubes, Rules, etc) have been deleted in the BI System. Is there a way I can check who and when was this object deleted.
I want details which shall help.
Thanks and BR,
Raj Jain

Hi Raj,
Check in T.code SLG1..
      Object : RSD
Subobject :
                   CUBE_DEL      (Deleting InfoCubes)
                    IOBJ_DEL     (Deleting InfoObjects)
                   ODSO_DEL     (Deleting ODS objects)
Give the time restriction period and execute..
Hope it will help..
Regards,
Siva.

CREATING TRANSPORTS FOR ROLES, SAP_ALL ISSUES

Hi all,
i have created a role , while creating a transport i have the options
personalization,
user assignment which one should i select while creating request.
what 's the difference between this two.
DOES SAP_ALL EFFECTS THE OTHERS AUTHORIZATION ROLES.
THANKS

Hi Venki,
I found some of your replys regarding ztable replication from r3 to CRM very helpful.
Could you please send me any docu that you followed to acheive this.
plase reply to the thread 'ZTABLE real time synchronization'.
my email id would be [email protected]
Any help will be appreciated....
regrads,
Sameer

Transport for System Copy from RSA1 in BW 3.5

Hi Guys,
I am not able to create transport for Source system objects for system copy in RSA1.
I have copied the production system(BWP) to sandbox(BWQ) and want to connect to same source system.
According to note 886102 when creating transport for Source system objects I am getting following error.
You cannot use request BWQK900020
Object ISIP ZPAK_5FKMUFOSQPPRNYYDZV1U6A7W0 could not be saved to order
BWQK900020
This is stand alone system but for transports I have created virtual system. Before creating virtual system I am able to create transports. But now after creating virtual systems I am not able to get pass above errors.
Any help would be appreciated also with points.
regards,
Santosh

Hi,
Check the notes 140276 and 325470 to chart out a plan of action.
BR/
Mathew.

Restore deleted objects with local transports ?

hi experts,
while trying to delete existing source system and create the same again in RSA1, I deleted some of the BW objects as it was asking to delete. Now I could not activate the bw source system, which I created newly. I have local transport created for the deleted objects. Is it possible to restore the deleted objects back.
Thanks,
Usha

Hi,
Welcome to SDN !!!!!
Is it only single BI system or any other BI system exists. If exists are these deleted objects moved to that other system. If yes then try to create the requests of deleted objects in that system and then transport them here. If it is only a single system then as per my knowledge I dont think it is possible to resote them from local requests. Normally if you have two clients in a system and if you want changes from one client to be copied to other then we do it using SCC1. But I guess you BI system might have only one client and I think transporting them in the same client would not work. But anyhow just give a try by using SCC1 tcode.
In last case check with your BASIS consultant if they are taking backup and till what date backup exists. If backup exists then ask them to restore the same and this will restore the complete system to date of which the backup exists.
Regards,
Sharath

Transportation of deleted objects

Hello All,
some unnecessary Queries and workbooks are transported to Test system and then to Production.Instead of deleting them manually in each system,i think we can delete them in development and write to transport request and then transport it to test and production systems..
can anybody let me know the procedure?
Bye.

Hi Rakesh,
Normally you can use RSZDELETE for deleting queries and other reporting objects in Dev Also. If such a object was already transported before, you will automatically get a transport request for the deleted object. There is no need to goto the transport connection for that. After releasing and tranporting the request, the objects will automatically be deleted in the target systems.
If you clear your open bex request and then do the deletions that you want to do, the only things in your bex request will be the queries to delete. If it is collecting other objects that you don't want to transport, you can manually remove those objects from your transport.
Hope this helps,
Sudhakar.

Best Practices For Portal Content Objects Transport System

Hi All,
I am going to make some documentation on Transport Sytem for Portal content objects in Best Practices.
Please help in out and send me some documents related to SAP Best Practices for transport for Portal Content Objects.
Thanks,
Iqbal Ahmad
Edited by: Iqbal Ahmad on Sep 15, 2008 6:31 PM

Hi Iqbal,
Hope you are doing good
Well, have a look at these links.
http://help.sap.com/saphelp_nw04/helpdata/en/91/4931eca9ef05449bfe272289d20b37/frameset.htm
This document, gives a detailed description.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f570c7ee-0901-0010-269b-f743aefad0db
Hope this helps.
Cheers,
Sandeep Tudumu

Creating transport for PI deleted objects

Similar Messages

Maybe you are looking for