Creating transports in QA system

Hello experts
We have had to apply a snote in our qa system (path issues), which worked fine.
The issue were having now is that when we have released it and the transport has created a log entry but noting else. Can anybody advise why the qa can't create transports, or where the transport has been created (the transport looks fine in se10, etc
Thanks in advance
Ian

Hello Ian,
Yoour initial description of the issue is not very clear.
You mentioned: "We have had to apply a snote in our qa system (path issues), which worked fine.
The issue were having now is that when we have released it and the transport has created a log entry but noting else"
What have you released ? Also where has the transport created a log entry. Also one concern why the SNOTE was implemented in QAS directly and not in DEV as it should usually be done.
Also what is the OSS note number we are talking about.
Regards,
Ruchit.

Similar Messages

Error when creating transport from Satalite system

Hi all i am getting the following error when i try and create a transport from a satalite system.
The RFC connection to the Solution Manager system is not maintained
Message no. STMWFLOW010
Diagnosis
No RFC connection to the central lock information management system.
The project lock functionality is active in the local system, but there is no RFC connection to the Solution Manager system.
System Response
Action cancelled.
Procedure
Create an RFC connection to the Solution Manager system, or deactivate the project lock functionality.
I have checked the RFC to Solman and that is working fine. How can I deactivate the project lock functionality?
Points will be awarded
Thanks
Santosh

Hi.
Please have a look at [this|http://help.sap.com/saphelp_sm40/helpdata/EN/43/7227481a856fcae10000000a1553f6/frameset.htm]
Hope it helps.
/cheers

CHaRM-Action "Create Transport Request" is cancelled

Hi All,
when i click on the action "Create Transport Request" and save the change document the following error is displayed
"Action Create Transport Request in system SM2 200 of type Source Systems has been cancelled"
where SM2 200 is our Dev Client in the same Solution manager.
i did add the SAP ROLE "SAP_S_RFCACL" to the user in both the client and gave full authorization
but it did not help.
Regards,
Pradeep L

hi Pradeep,
i am doing ChaRM configuration in our Solman system and also new to this.
i need help for "Create Transport Request" from CRM action....
Is it possible to create TP request from CRM action??
if yes please guide me how to do it?
Expecting ur reply...
Regards,
Selvakumar RV

Transporting role menu and workbook created diurectly in production system

Hi gurus,
We have several workbooks (and queries) that are created directly in production system. thoose workbooks are connected to a role that is created in development system and transported to production system.
Now, we would like modify this role in development then tranport it on production system, but we are afraid that will be wiped out (overwrite) our production system workbooks (because the role not contains this workbook in development).
Could you please explain to us what we have to do in order to not wiped out our production workbooks.
Thank you in advance

thank you, it's more clear for me...
Exactly, to have all my requests and workbook in development, I tried to use "Transport order of copy (it means transport queries from Production system to development system)", then to connect them with the corresponding roles in development, but I have the think that BW considers them as new requests when I re-transport them again on the prod.)
Could you say me if i can transport my production system queries on my development system, and manage them in this system (development) in the future.
Thank you in advance

ChaRM:Release of system GRS not be determin during Create Transport copies

Hi ,
I am facing following error during Create Transport of copies in ChaRM Maintances Cycie.So we couldn't able release the TR.
Error : Release of system GRS could not be determined
We already checked some threads, but we couldn't get solution.
Kindly help to fix issue.
Regards,
Karthik

Hello,
My suggestion is execute a charm check in your project to verify if there is some consistency error.
Please, check if there is a IMG project assigned.
This will require an IMG project to be assigned and the correct logical component added which will reflect the TMS configuration.
Best Regards,
Diego Fischer,

Unable to Create Transport request in more then one DEV client (in ChaRM)

Hi,
We are having 2 Landscapes,
DV1 (100) --> QA1(100) --> PR1(100)
DV1 (200)--> QA1(200) --> PR1(100)
Both these landscapes are added in the ChaRM Project landscape. When we have created a correction and created a Workbench request, we were getting the option to choose the DEV system and we chose DV1(200). When we tried to create a TR for Customizing in DV1(100) it did not provide the pop up for DEV systems and directly created the customizing request also in DV1(200). We were unable to even create the TR in DV1 (100) - using the task 'Create Transport request' in the Task plan for the corretcion (It gave an Error that the DV1(200) is the Development system for this change).
is this the standard behaviour? can't we have TRs from different client/ development systems under the same correction?
Please clarify?
Regards,
Kathir

Hi
As i said earlier you will get option to choose system for creating Transport Request only in case of normal corr
but in case of urg corr
you need to give ibase for production of the cocerned landscape
e.g if u have ecc and bi and want to create transport in ecc then giv ibase for prd of ecc only
because you will not get pop up in urg corr
Hop doubt clarified
Regards
prakhar
Edited by: Prakhar Saxena on May 12, 2010 6:17 AM

Create transport request based on SDMI transaction type

Hello,
a customer of mine intends to use transaction type SDMI in a kind of unusual way. He only creates SDMIs without creating projects, cycles or change requests in ChaRM. He uses a customized copy of the normal correction to track his changes and now needs to activate the functionality to create transport requests as an auditor requirement.
As I'm not proficient in ChaRM, I would like to know if that is at all possible.
Assuming it is possible, what would be the preferences to use action "Create Transport Request" regarding IBase etc.?
Assuming it is not possible, what would be necessary as a minimum to establish the link to the respective system in which the transport request should be created to get that action working, a maintenance cycle? How is the maintenance cycle linked to the ticket?
That are a lot of questions, and it would be highly appreciated if somebody could lighten up the fog there for me.
Thank you in advance!
Kind regards,
Emanuel

Hi,
1) Do I need to perform any steps in the task list before ChaRM can be used?
No once task list is in active state and sdmn is created for ur project u can start using charms
2) How is the maintenance cycle ticket (SDMN) linked to the change requests? Is this linkage done in the SDCR ticket via the maintenance project in the "Customer fields", where solution, maintenance project etc. can be assigned? Or is this implicitly done by the chosen IBase?
Yes everything is dependent on IBASE and logical component.
Check this links
https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
http://help.sap.com/saphelp_sm32/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
Check SMP/SDN
https://websmp208.sap-ag.de/changecontrol
Resources on CTS+ [original link is broken]
Hope it solves ur queries
Regards
Prakhar

Exit Fm is not to CMOD project but transported to test system

Hi.
I have a enhancement MWMIDO08 with contains function module EXIT_SAPLLMDE_002 and which incldes program ZXLIDU10.
I made my necessary changes in the include program and transported to test system, without creating any CMOD project.
But my changes are working fine in test test.
Can you please suggest me, what to do now? if i want create a CMOD project now and add the function exit into it. and resend the new request to test system.
Does it create any problem.

This sort of thing can happen if someone has assigned a CMOD project to the enhancement containing the user exit before.
First check in SE16, table MODACT with MODACT-MEMBER = 'MWMIDO08', then MODACT-NAME will give you the existing project that is already assigned to enhancement MWMIDO08
If there is no entry in MODACT then you can safely create another project and assign the enhancement to it, activate and transport.
If already there is an entry in MODACT, you need to check if the same entry exists in your QA and Prod systems, to verify if someone already transported it. If it is not transported you need to deactivate / activate the project and transport that project again.
No this should not cause any problem and I can tell from experience having done same thing before.
Best regards,
Vishnu Tallapragada

Creating transport request manually

Hi All,
I have an entry in a table, I want to transport it to other systems (QA).How can I create Transport Request manually and attach table entry to this Transport Request.
Please let me know procedure how to do this.
Thanks in advance
jog

Hi,
Check this :
Create a workbench transport request in se09 and double click on it, system opens request/task screen , go to objects tab add program id as 'R3TR' object type as 'TABU' object name as table name (ex: ZTABLE) and click on the function button , put '*' in table keys and save the request.
now transport this request , table entries will be transported to respective systems .
Regards
Appana

How to create Rfc for EP system in Solution manager

Dear experts,
I am doing ChaRM configuration for my EP system ( java only).
I also configured CTS+ successfully but we want to integrate this with Chram in solman.
I have done all configuration according to standard doc for ChaRM.
But when creating project from solar_admin it is giving "   NO RFC for DEP system"
so please suggest me how to create RFC for java system in Solution manager.
thanks in advance
dhiraj

Hello,
You need to setup an ABAP communication client and system, that's done through the TMS settings:
For source system:
- CTC                                              1
- CTS_SYSTEM_TYPE                          JAVA (others for a MDM system)
- NON_ABAP_SYSTEM                          1
- COMMUNICATION_SYSTEM:              (SAPSID of the ABAP communication system (e.g. the domain controller))
- NON_ABAP_WBO_CLIENT                    (Client of the ABAP stack on which the Transport Organizer Web UI (CTS_BROWSER) is activated and will run.)
- WBO_GET_REQ_STRATEGY                 TAGGED
- WBO_REL_REQ_STRATEGY                 MANUAL
For quality and production Java system (target systems):
- CTC                                              1
- CTS_SYSTEM_TYPE                          JAVA (others for a MDM system)
- NON_ABAP_SYSTEM                         1
- COMMUNICATION_SYSTEM:                 (SAPSID of the ABAP communication system (e.g. the domain controller))
- DEPLOY_WEB_SERVICE                       CTSDEPLOY
- DEPLOY_DATA_SHARE:
When this is done correctly, you will see the fields ABAP communication system and client populated in SMSY.
When ChaRM needs to operate on the non ABAP systems, it will take the RFCs for the communication system and client.
Best regards,
Miguel Ariñ

Transport of Business System in IDoc scenarios.

HI All,
I am doing IDoc scenarios so I am using Business System say PIS_800 . Now i have moved these scenarios to quality system and my Business System name is supposed to be PIQ_800.
I am using simply file import-export for transport. After transport my Business System name is coming as PIS_800 only.
Can anybosy plz suggest me how to change it to PIQ_800? This part is quite new to me so detailed explaination will be helpful.
Thanks,
Atul.

Hi Atul,
In DEV
1) Export the TS & BS of SAP R/3
2) Export the TS & BS of DEV XI Server
In QTY
1)Import the TS & BS of SAP R/3
2) Import the TS & BS of DEV XI Server
3) Create the TS for Quality SAP R/3 & Corresponding BS also which is pointing the QTY Server Details
Now create the Transport Groups and Targets
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
With this Configuration, the DEV BS will be replaced by the QTY BS.
Thats all
Regards
Seshagiri

Transports in PI System

Hello All,
Can you please suggest me the options for Client and Transports in PI system.
Basically we are planning just one client in PI system in all landscapes (Dev-TEST-QAS-PROD).
Does PI need some kind of communication or Data from ERP ,CRM ,BI system??
What about the Java Objects or XI object which are required to be transported??
Found something like manual transports and CMS.
We have no plans for NWDI??
Pls suggest how we should approach this!!
Regards
Ajay

Hi
The design Objects are transported one system to other system using file transport method
Choose export the Design Objects from the tools menu.
Choose the source (The Software Component Version)
Mode can be "Transport using File System"
Check "Download File to Client"
Then Select the objects for example "All objects of a Software Component Version"
Then is would start exporting to the location you specifiy.
After the export is over, you can import this into the target TEST, QA, PRD by using tools-> import Design objects.
Note:
Connection to ECC is not necessary duting transport. However after transaport, for testing the connection should be established.
In SLD, technical systems and business systems should be created.
In ID, objects should point to exact system for which testing is needed. All the ID objects should be manually created like Sender Agreement, Receiver Agreement, Receiver Determiantion, Interface Determination.
The other option is CTS+
Regards
Monika

Transport type when copying transports to other system

Hello,
probably a simple question. I have to transport couple transports from one system to another, there is no link between the systems.
I have created one (mass) transport which include objects of these transports, but I am not sure what type of the transport should I choose (transport of copies, relocations (it is not clear to me)), also I do not want to release the one big transport to Q systems transport queue. I just want it to create the cofiles to move to other system.
So question will be how to copy this one transport (via cofile, data file), or if it is possible to release transport without target system?
Thanks in advance
Martin

Hi,
Please ensure that STMS is configured in your system, since it is a stand alone system you can make it as a Domain Controller also. After that goto transaction se10 and check for the transaction which are in modifiable state. Then relese the transport starting from the inner request corresponding the transport request created by you.
Note that once you release this trasaction data files and cofiles are created in trans directory, and you have to manullay copy these files to the system in which you want to transport these files.
After that goto transaction stms_impot in the target system and add this transport request and import it. the data in the transport reuest will qutomatically gets imported the.
Thanks
Rattandeep

Process Chain Triggered automatically when transported to test system

Hi All,
We modified several process chain and transported the process chain to Test system.
Few Process chain triggered automatically as the varient was set to immediate in development system.
Now we want to move the process chain to production. Do we need
1. new transport request with the variant to future date and discard the transport request which created issues
2. New transport request with the variant to future date and transport the new along with the old transport to production system
3. Change the start date in Test system and transport the same request to production
Kindly advice me on the action to be taken.

>
> Hi All,
>
> We modified several process chain and transported the process chain to Test system.
> Few Process chain triggered automatically as the varient was set to immediate in development system.
> Now we want to move the process chain to production. Do we need
>
> 1. new transport request with the variant to future date and discard the transport request which created issues
> 2. New transport request with the variant to future date and transport the new along with the old transport to production system
> 3. Change the start date in Test system and transport the same request to production
>
> Kindly advice me on the action to be taken.
Regarding 2: When the old transport is imported into production the start will be set to immediately and the process chain will execute. You should not use this option.
Regarding 3: Changing in Test system will not affect the content of the transport, it will still be the same as released from Dev.
We have avoided this annoying problem with process chains being executed when transports are imported by creating a "parent" process chain that simply triggers the process chain in question. This "parent" chain should not be transported. You then set the start option for the original process chain to "start by API/Event" then you can transport the original process chain whenever you want without any risk of the process chain being executed.
Regards,
Lars

Is the complete query overwritten once it is transported to another system?

Hi,
I had developed a query with some variables on the infoset. This has been transported to the production system.
But due to some requirement change the infoset was impacted due to the changes made in the ODS. (on which the infoset was created).
So the infoobjects technical names of ODS in the Infoset had changed. (F1 to F11....). Due to this the variables which were built on this infoobjects after the change are showing up under different infoobjects after technical name change.
Now to solve the issue, if i delete the variables and create under their respective infoobjects and transport to production system, will this work? Will the varaibles which were already transported to production system deleted automatically after the query is again transported to the production system?
Please help
Thanks,
Rani

Hi Rani,
Make sure u include the deletion change in the transport.
when u delete the variable it will ask for trnasport.
and also to ensure all ur changes are in the transport go to transport connection in RSA1. In that ->object types->query element->find ur query and trasnfer it.
make the grouping as 'only necessary objects'.
it will give u the list make sure it is all present in ur transport.
u can see the transport number in the rightmost window.
If u see all are not included tick and use the 'transport' -truck icon on topic.click on that and assign the transport.
hope it helps
Regards,
Rathy

Creating transports in QA system

Similar Messages

Maybe you are looking for