Creating Travel request with TRIP Getting Error 'Infotype P0017 could not be read'

Getting this error while creating travel request with TRIP transaction code. Please help for an alternate way to create Travel request or help to resolve this issue.
If this error is due to 0017 maintenance, please help me to maintain infotype 0017.

Hi
This is done by functional Guy
As work around
Go to transaction PA30 to open master record of employee for whose trip need to be created type 17 at infotype ->  enter F5  and Save.
With regards,
Gopala Krishna

Similar Messages

  • TS1717 Hi, my iTunes application is not connecting to the iTunes store. It is coming up with the following error message "we could not complete your itune store request. An unknown error occured (11222)" Can you please assist?

    Hi, my iTunes application is not connecting to the iTunes store. It is coming up with the following error message "we could not complete your itune store request. An unknown error occured (11222)" Can you please assist?

    Hi Laura-Wedders,
    Thanks for visiting Apple Support Communities.
    On August 7th, some users may have been unable to make purchases from the App Store, iTunes Store, Mac App Store, or iBookstore. Apple worked quickly to resolve these issues, however you may have experienced them.
    To check the current status of these systems please see:
    Apple - Support - System Status
    http://www.apple.com/support/systemstatus/
    If you are still experiencing issues, you may want to troubleshoot with the following articles:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    All the best,
    Jeremy

  • Why do I get "error code 3: Could not load front panel" when I run my executable​.

    I have a LV 8.5 VI that controls only an agilent spectum analyzer. The agilent VIs call DLLs rather than SCPI commands. I created an application and an installer to load on a non LV machine and ran setup which was successful. When I run the EXE I get "error code 3: Could not load front panel" for each of my agilent spectrum analyzer VIs. I have to click "OK" about ten times, once for each VI. (My executable runs fine on all machines that have labview 8.5) The front panel does load with a broken arrow. The errors listed when the arrow is clicked for all of the Agilent VIs state: Missing subVI AGE444xInitialize.VI (or close.VI or read.VI etc.)
    There is an AGE444x32.DLL in the data folder with the EXE file so I included as support both the DLL and all of the agilent drivers in the application build. Still no luck. I have built the application and installer about 6 times in various forms. I NEED AIR SUPPORT.
    Unfortunately I do not have access to the internet at my jobsite so bear with me.
    Rob

    Hi V-rob,
    I'm glad to hear the executable is working now that NI-VISA is installed.  Thanks for posting the solution!
    Jennifer R.
    National Instruments
    Applications Engineer

  • Continue to get error message "backup could not be completed" after purchasing additional storage

    continue to get error message "backup could not be completed" after purchasing additional storage

    Just wanted to update the community on my exciting adventure to fix my ipad;
    I made my way over to the Apple Store here in South Florida and had my appointment with the geniuses. No one could figure this sucker out!  They did every thing they could think of to the ipad without success. Couldn't even tell me what the problem was. All were very nice about it, of course. I was told to wait a day while they contacted the great and powerful central genius(es) but apparently no one was home there since they never responded to the request for help.
    Anyway, I will go back to the Apple Store one more time before I give in to the conclusion that my 3 year old iPad (original) is DOA

  • HT201210 im trying to restore my iphone 4 but getting error message as could not be contacted or temporarily unavailable plz help

    im trying to restore my iphone 4 but getting error message as could not be contacted or temporarily unavailable plz help

    Hey santhosh.pv,
    We have a few articles that can help troubleshoot the alert message in iTunes you see when you are trying to restore your iPhone 4. You can resolve many restore issues using the troubleshooting steps documented here:
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    The next article is the companion of the more general article above. Follow the above article first. If, after following that article, the issue persists, continue with this article:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/ts3694
    Cheers,
    David

  • Cant open itunes. Get error message CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll. Anyone know how to fix that?

    Cant open itunes. Get error message CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll. Anyone know how to fix that?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The error hints at a similar pattern to those discussed in the first and third boxes of the user tip, suggesting that you've got an outdated .dll file that needs replacing. You should find CoreMedia.dll in the one of the following folders:
         C:\Program Files\Common Files\Apple\Mobile Device Support
         C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    Delete it and then repair Apple Mobile Device Support from the Programs and Features control panel. If that doesn't work go for the full tear down and rebuild.
    tt2

  • I get error message iTunes could not sync calendars to iPhone because an error occurred while merging data

    I get error message iTunes could not sync calendars to iPhone because an error occurred while merging data on my wifes phone how do you correct problem without losing calendars info on phone.

    One thing that might help.
    1. open itunes preferences from the edit menu and click on the devices tab.
    2. check the box to disable syncing for iphones connected to itunes and click ok.
    3. Then click the button to reset sync history.
    4. Now click ok to close the preferences window.
    5. connect the iphone to itunes and go to the info tab.
    6. scroll to the bottom of the info page and check the box to replace the ical data on the iphone.
    7. then click apply on the bottom right of itunes.
    This will overwrite any events on the iphone, including any events that has become corrupted.
    Hope this helps

  • While installing or updating I get error 1606. Could not access network location \Plugins.

    While installing or updating I get error 1606. Could not access network location \Plugins.

    Apparently there's a solution here: http://www.sevenforums.com/microsoft-office/230360-installation-error-1606-could-not-acces s-network-location-plugins.html

  • I am using numbers but I am not able to update numbers and I get error that you could not able to download this app.

    I am using numbers but I am not able to update last version of numbers. When I try to update that I get error that you could not able to download this app. So what should I do?  

    Try running the combo update.
    10.9.2
    If that works and it still shows as an update, try re-indexing Spotlight.
    Spotlight – Re-index

  • PCUI error: Field group could not be read completely

    Hello,
    I am trying to remove some fields from the Sales Data tab in the Sales Orders application CRMD_BUS2000115. I have changed field groups before, noth in CRM 4.0 and CRM 5.0, but in this case, I always get this error.
    By going into debugging mode (tracelevel set to 2222) I determined the main field group to be SLO_SALES, with lots of smaller reference groups below. Whenever I change one of the reference groups and try to generate the layout of SLO_SALES I get the error "Field group could not be read completely". I even reverted all changes by emptying all the entries from the reference groups so that my c-tables are empty, but I still get the error. All field groups below this one yield the error "No field group selected in blueprint table", so I cannot build those either.
    Has anybody else tried to change the contents of that application in that tab?
    Regards
    Thomas

    Hi Thomas,
    Everytime you do changes in the reference group the entries in table 'CRMC_FIELDGRP' changes. So you will have to go to this table check entries for the main feild group 'SLO_SALES' in your case and then change entries for this feildgroup in CRMC_BLUEPRINT_C. The idea ia that the data should be consistent/same in both the places.
    Hope this helps you.
    Regards,
    Hetal.

  • Has anyone had the error "The file could not be read due to an error" when selecting ignore or replace image links. The linked images are in Dropbox if that helps.

    I am working on a Mac 10.9.5 with Adobe CS6. My files are locally in Dropbox but once we moved files to network and tried opening the AI - the file would not recognize the original folder location. I tried ignoring the missing images but then I receive the error - The file could not be read due to an error." The same error happens when I try replacing the first missing image. I know the problem lies in the images are linked back to my Dropbox but the AI file doesn't care since it won't let me replace or ignore the image links.

    Jasion,
    Maybe a bit beside the question, but it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky, at least for a while, but it is better to be safe than sorry.
    In addition to the (far greater) risk of file corruption, some issues are mentioned here:
    http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

  • Has anyone had the error "The file could not be read due to an error" when selecting ignore or replace? The linked images are in Dropbox if that helps.

    I am working on a Mac 10.9.5 with Adobe CS6. My files are locally in Dropbox but once we moved files to network and tried opening the AI - the file would not recognize the original folder location. I tried ignoring the missing images but then I receive the error - The file could not be read due to an error." The same error happens when I try replacing the first missing image. I know the problem lies in the images are linked back to my Dropbox but the AI file doesn't care since it won't let me replace or ignore the image links.

    Jasion,
    Maybe a bit beside the question, but it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky, at least for a while, but it is better to be safe than sorry.
    In addition to the (far greater) risk of file corruption, some issues are mentioned here:
    http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

  • When i download any file it start in a second but when i pause the downloading file & after some time when i open it amessage flash 'download error' source file could not be read please try again later or contact the server administrator.

    when i download any file it works frequently and downloading start in a second but when i pause the downloading file & after some time when i open it,The downloading not start proper and after some time a message flash 'download error' source file could not be read please try again later or contact the server administrator.

    I downloaded the Microsoft Autoruns package and ran it.  There are no programs in the LSA Providers tab, and Apple's Bonjour is the only program in the Winsock Providers tab.  I also did the "netsh winsock reset" and rebooted.  It didn't fix the problem.  Any more ideas?

  • I am getting error message "iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone".  I have deleted the backup and restarted my computer, but continue to get this error message.  What do I need to do now?

    I have recently updated my phone and am attempting to sync it.  I got the error message "iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone".  I deleted the backup, restarted my computer, and even restored the iPhone, but continue to get the same error message.  What do I need to do now?

    iTunes places the iPhone backup in the following location. Navigate there & delete everything in the backup folder, but not the folder itself. You will have to turn on "Show All Hidden Files & Folders" to see it:
    Mac:~/Library/Application Support/MobileSync/Backup/
    Windows XP:\Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Windows Vista and Windows 7:\Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\

  • Getting error The user could not be registered at this time due to an internal error in R11

    We created new Organization (that had alpha numeric value e.g.  7777A) using Customer Online to be used in iStore i11 version. 
    The user account and password was also created for the organization.  When we tried to login to istore the first time the registration screen (jtftmplh.jsp) was displayed.  After filling the needed information and submitting we get the error:
    "The user could not be registered at this time due to an internal error Please contact the system administrator if this problem persists.
    Note to System Administrators: View source for more information about this error."
    But if we created new Organization with numbers only  e.g. 7777  we don't have the issue. Yet we already have large number of organization with alpha numeric and they work fine. (believe they were pragmatically loaded).
    The profiles "HZ: Generate Party Number" and "HZ: Generate Party Site Number" are set to Yes.
    ==> Here is the error in the page source:
    Message: The user could not be registered at this time due to an internal error
    Please contact the system administrator if this problem persists.
      Note to System Administrators: View source for more information about this error.
    Stack:
    oracle.apps.jtf.base.resources.FrameworkException: The user could not be registered at this time due to an internal error
    Please contact the system administrator if this problem persists. 
    Note to System Administrators: View source for more information about this error.
        at oracle.apps.jtf.um.template.TmplUtils.action(TmplUtils.java:406)
        at _oa__html._jtftmplh._jspService(_jtftmplh.java:3961)
        at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java)
        at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java)
        at oracle.jsp.JspServlet.doDispatch(JspServlet.java)
        at oracle.jsp.JspServlet.internalService(JspServlet.java)
        at oracle.jsp.JspServlet.service(JspServlet.java)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
        at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java)
        at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java)
        at _oa__html._jtftmplh._jspService(_jtftmplh.java:3870)
        at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java)
        at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java)
        at oracle.jsp.JspServlet.doDispatch(JspServlet.java)
        at oracle.jsp.JspServlet.internalService(JspServlet.java)
        at oracle.jsp.JspServlet.service(JspServlet.java)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
        at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java)
        at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java)
        at _oa__html._jtftmplh._jspService(_jtftmplh.java:2342)
        at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java)
        at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java)
        at oracle.jsp.JspServlet.doDispatch(JspServlet.java)
        at oracle.jsp.JspServlet.internalService(JspServlet.java)
        at oracle.jsp.JspServlet.service(JspServlet.java)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
        at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java)
        at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java)
        at _oa__html._ibeCRgpBusinessCreate._jspService(_ibeCRgpBusinessCreate.java:1467)
        at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java)
        at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java)
        at oracle.jsp.JspServlet.doDispatch(JspServlet.java)
        at oracle.jsp.JspServlet.internalService(JspServlet.java)
        at oracle.jsp.JspServlet.service(JspServlet.java)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
        at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
        at org.apache.jserv.JServConnection.run(JServConnection.java:294)
        at java.lang.Thread.run(Thread.java:680)
    Caused by: oracle.apps.jtf.base.resources.FrameworkException: IBE_ERR_UM_REG_USER
        at oracle.apps.ibe.um.RegisterBusiness.handle(RegisterBusiness.java:1157)
        at oracle.apps.jtf.um.template.TmplUtils.action(TmplUtils.java:379)
        ... 37 more
    Caused by: oracle.apps.jtf.base.resources.FrameworkException
        at oracle.apps.jtf.base.resources.FrameworkException.convertException(FrameworkException.java:607)
        at oracle.apps.jtf.base.resources.FrameworkException.addException(FrameworkException.java:585)
        at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:66)
        at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:88)
        at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:202)
        at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:218)
        at oracle.apps.jtf.base.resources.FrameworkException.<init>(FrameworkException.java:249)
        ... 39 more
    The error message is not helpful and not clear of the error. How can we register users with alpha-numeric value (if that is the issue?).
    Thanks for your assistance.

    Been like this for a couple of days.  Is this something that happens from time to time?

Maybe you are looking for