Creating type along or inside a path

Hi All,
I read the tutorial about Creating type along or inside a path. I have tried to create few types of type along,inside and outside a path and shape. I was wondering why there are variations and restriction among them. Below are my screen shots to describe my problem.
Screen 1

Sorry, I have been trying to upload the screen shots, now it is done.
Screen 1: type outside the path
Screen 2:type inside the path
Screen 3:type outside the shape
Screen 4:type inside the shape
I am confused why I cannot flip the "type inside the path" whereas flipping inside and outside is possible for "type outside the path". Any help is greatly appreciated. Thank you.

Similar Messages

Multiple Lines of Type Along Path

Hi,
I have a sort of ring doughnut shape (just to be clear, a circle with the centre cut out) and want to add text within this shape. To make the shape, I created a larger circle, then a smaller circle overlapping it and chose "Exclude Overlapping Shapes". I can obviously click within the larger circle and then type along this path, either outside or inside depending on the baseline shift %, but the trouble is my text is multiple lines. When I press 'enter' I don't get a new line, I just lose the typing tool. Surely there's a way to do this? I'm using Photoshop CS6.
Thanks for any help!
Chris

Surely there's a way to do this?
I guess it’s creating multiple Paths – one for each line.

Why Can't I Type Along Path?

I working in PS CS5. I've created a new layer on my image for my text. I created an elliptical and clicked the path button. I then clicked the Horizontal type tool. I began typing, but realized that each letter was creating a "_" instead of typing the actual layer. Now I have _________ going across my elliptical. Any thoughts?
Thanks!

Is the cursor changing before you start typing.
If you want the text along the path, hover the cursor until it looks like below
and then click to type
For type inside the path hover the cursor inside the path until it looks like below
and then click to type.
You don't have to create a new layer before you type on a path, the type layer
will be created if your using horizontal or vertical type tools (not the type mask tools).
Your using the ellipitical marquee tool to make a selection, then turning it into a path?
Also if your not seeing any type, check that your foreground color is not the same color
as your image and/or try a different font.
MTSTUNER

Create text inside a path or shape in Photoshop CS6?

Is there a new way to fill a shape or path with text in CS6.
When I create the path I can put my text tool "over" the path & my cursor switches to a curved line through the cursor, but when I place the cursor "inside" the path it just goes back to regular cursor & if I click inside it just starts a new (regular) text layer.
In older versions as soon as I placed my text cursor inside the path it would switch to the text cursor inside parenthesis. And thus type inside the path. That doesn't happen anymore.
Is there a new way to do this?
Thanks

Ptauly wrote:
Just figured it out. You apparently have to create a "shape" layer first.
That's strange because I don't find it necessary to create a Shape layer in CS6, and I don't think JJ needs to create a Shape.
I can create a closed path, Work Path for example, position Type Tool pointer inside path to see the dotted circle pointer, click on canvas then start typing.

Create type on a path (circle)

Does anyone knows how to create type on a path (circle) so the first line of text flows on the top and the second line on the bottom?
Thanks!
Wisine

http://indesignsecrets.com/quickly-add-type-to-top-and-bottom-of-an-ellipse.php
Bob

Create tables insert something inside and then connect my application to db

thank you to be patient with me. ok since the beginning I think I have learned a lot with the people responses. so my database is mounted now. I used the cmd.exe command line. i have create an instance, a service, and the database. Now, I need to do two things:create tables inside of my database and insert something inside but I only have the sql script (I will add it at the end of the thread).it is just a part of my huge script.. but this cript can not be open with the command line. So I want to know if you could help me change some stuff inside in the aim to run this script with the command line.that's the first point
secondly, I have an application named lifetrack. i want to connect this application with my database. so how can I change my settings file to be able to do that?(I will add the settings file I have at the end.It is the one I use for sql server). thanks a lot.I'm a french student so I try my best to answer you in a good english. and believe me if I have the exact way to create table,insert something inside like indicate in the part of my script and connect an application to the database you will never see my thread again. thank you
1) sql script to create tables
CREATE TABLE [admin_table] (
     [Can_highlight] [float] NULL ,
     [User_name] [nvarchar] (30) COLLATE Latin1_General_CI_AS NULL ,
     [User_passwd] [nvarchar] (10) COLLATE Latin1_General_CI_AS NULL ,
     [User_group] [nvarchar] (30) COLLATE Latin1_General_CI_AS NULL ,
     [Can_consolidate] [smallint] NULL ,
     [Can_edit_autorpt] [smallint] NULL ,
     [Can_edit_disturbance] [smallint] NULL
) ON [PRIMARY]
GO
INSERT INTO [admin_table] ([Can_highlight],[User_name],[User_passwd],[User_group],[Can_consolidate],[Can_edit_autorpt],[Can_edit_disturbance])
     VALUES (1.0,'A Andrews','A','both',0,0,1)
GO
2) sql server settings file
' NOTES:
' ======
' The parameters in this file are used to specify the following configuration features for the system
' 1. the plant profile
' 2. the default database as well as the available searchable databases
' 3. the paths for accessing particular files used or generated by the system
' The Panels Configuration Mode has either of two values: "Embedded" or "External". It is a setting that determines
' whether the system loads configuration data for the sections of subjects buttons, which are already embedded
' within it, or whether it loads them from the external file:
' "Lifetrack Subjects Panel Configuration.dat"
' The System Database is an index value (zero-based) that determines which of the listed available databases
' is the main active one. In the DATABASES section, the parameters in each comma separated string
' designate the following (in this order):
' DB Index, DB Name, DB Type, DB Filepath, Server Name, Username, Password
PLANT SUBJECTS PANEL:
Panels Configuration Mode: Embedded
DATABASES:
System Database: 0
Available Databases: 1
0,abc_plant,SQL-Server,SQLSERVER_DATABASE,(local),sa,password
FOLDERS:
Saved_Log_Folder: .\
Saved_NOB_Folder: .\
Saved_Log&NOB_Together_Folder: .\
MICROSOFT OFFICE PATHNAME:
Pathname: C:\Program Files\Microsoft Office\Office11\

Yet another thread and yet another cut & paste job.

Error while creating a Characteristic Variable with Replacement Path

Hi all,
    I am trying to create the Characteristic Variable ZVLOWDT (Low Date') with Replacement Path on characteristic ZSTARTDT (Start Date) and it gives the error 'Source to replace 'Low Date' is not defined.
   I have created a User Entry Variable VAR_DATE (Start Date) with interval like '01/01/2009 - 01/15/2009' and Customer Exit variable ZVCPDAY (does some calculation based on the input of VAR_DATE) on the same ZSTARTDT characteristic. I want to get the 01/01/2009 (lower range date of the selection) into this Characteristic Variable ZVLOWDT. We are in BI 7.0 and the following are it's properties:
General Tab:
Description: Low Date
Technical Name: ZVLOWDT
Type of Variable: Characteristic Value
Processing by: Replacement Path
Reference Characteristic: ZSTARTDT Start Date
Details Tab:
Variable Represents : Single value
Variable is: Mandatory
Variable is Ready for Input : unchecked
Replacement Path Tab: Replacement Rule
Replace Variable with : Variable
Variable : VAR_DATE
Replace with : KEY
Why I am getting this error, PLEASE ?
Thanks,
Venkat.

Hi Khaja,
   We could derive a Variable value from another Variable with out Customer Exit. There is a white paper.
First have the User Entry Variable (ZV_X) and it accepts the date range like '01/01/2009 - 01/31/2009'. Next create the Characteristic variable (ZV_Y) of Replacement Path for which source variable will be ZV_X and we could get the 'FROM Date' (01/01/2009) from the selection (ZV_X) into it (ZV_Y).
While creating the Characteristic variable (ZV_Y) of Replacement Path, I didn't find my newly created ZV_X variable in the list of available variables under 'Variable' header in 'Replacement Path' tab and it is causing the error 'Source to replace variable ZV_Y is not defined'. How could I create the Characteristic variable of Replacement Path, PLEASE ?
Thanks,
Venkat.

Created a tab canvas inside a content canvas, but i can't create a new ...

i created a tab canvas inside a content canvas, but after that, i want to create a new empty canvas by clicking the canvas node ,then "+" , but it always gave me a new canvas with the tab canvas in it as default. this problem happens when i use tab canvas , if i just use other items i.e. text, button,list, i can create a new empty canvas. Thanks.

I don't quite understand the steps you took to be able to recreate the problem. But you can change the canvas type of a canvas from the property palette.

Pse 10 text inside a path

The answer is yes, pse 10 also does text inside a path or in most any shape layer.
MTSTUNER

Those tools only do text on a path and unless you know how, not on regular shape layers or inside paths.
To do type inside a path (shape layer) just make a shape layer and use the regular type tools by hovering
the cursor inside the shape (path) until you see this symbol:
MTSTUNER

CREATE TYPE Alternative in TimesTen

Hi
we are using Timesten 11 version and as per the documentation, it doesn't support CREATE TYPE. So we are looking for alternatives to do it. Could you please provide your expert voice on this.
Thanks a lot.

Hi.
If you are looking to use this type with PL/SQL, you could create your type inside a package and have your code refer to it through the package:
CREATE OR REPLACE PACKAGE PKG1 AS
TYPE NUMARRTYP IS TABLE OF INTEGER INDEX BY BINARY_INTEGER;
TYPE rec is
record ( paramname VARCHAR2 (30),
paramvalue VARCHAR2 (1024) );
END PKG1;
declare
x PKG1.rec;
y PKG1.NUMARRTYP;
begin
/* .... */ null;
end;
but you can't create types for column definitions.

Need to create file in unix (oracle directory path)

Is it possible to create a file in oracle directory path (in unix folder).
I am using a dynamic procedure to create the External Tables, when the given pattern file is present the procedure will create the External table, if the file is not present then it should create an empty file so that the corresponding External table would return zero(0) records. It should not fail.
It has to be through plsql not using unix script.
UTL_FILE.FGETATTR(V_DIR_NAME, V_FILE_NAME, V_EXISTS, V_FILE_LENGTH, V_BLOCKSIZE);
IF v_exists=FALSE THEN
--------create an empty file
v_file_name:=empty_file;
end if;
--Create table script which will dynamically create the external table
v_sql := 'CREATE TABLE '||V_RX_NAME||' ( '||RTRIM(v_cols,', ')||' )' ||
' ORGANIZATION EXTERNAL '||
' ( TYPE ORACLE_LOADER '||
' DEFAULT DIRECTORY "'|| v_dir_name || '"'||
' ACCESS PARAMETERS '||
' ( RECORDS DELIMITED BY NEWLINE '||
' LOAD WHEN ( '||RTRIM(v_null_cols,'and ')||')'||
' BADFILE '''||rec_mkt_name.SUBJECT_AREA_NAME||'_'||rec_mkt_name.PARAM_NAME||'.BAD''' ||
' DISCARDFILE '''||rec_mkt_name.SUBJECT_AREA_NAME||'_'||rec_mkt_name.PARAM_NAME||'.DISCARD''' ||
' LOGFILE '''||rec_mkt_name.SUBJECT_AREA_NAME||'_'||rec_mkt_name.PARAM_NAME||'.LOG'''||
' FIELDS TERMINATED BY ''~'' OPTIONALLY ENCLOSED BY ''"'' '||
' MISSING FIELD VALUES ARE NULL ' ||
' ) LOCATION ('''||V_FILE_NAME||''') ) REJECT LIMIT UNLIMITED';
GV_CURR_STEP := v_sql;
dbms_output.put_line(V_FILE_NAME) ;
EXECUTE IMMEDIATE v_sql;
...........

Saubhik wrote:
Try to use utl_file.fopen with 'W'.Or maybe even with "A", and then close it. If you use "W" it will overwrite the file if it already exists. ;)

Is there any way to create a HTTP_AAE Receiver without a path in NW PO 7.31

Hi ,
Does anyone know how to create a HTTP_AAE Receiver without a path??
We are in a phase of migrating Interfaces from PI 7.1 to PO 7.31(Java Only).
For one of the Interface in PI 7.1 there is a RFC Destination for vendor communication through HTTPS connectivity :
TargetHost: IP Address
Post: value
Path Prefix: Blank
During migration requirment is to keep the Path field BLANK of the Communication Channel,however since PO has mandatory path field a "/" is been provided, because of which data post fails.
PI: https://IP:9443
PO: https://IP:9443/ (Since Path Prefix is mandatory)
As per my understanding The data is supposted to be posted directly to the IP (https://IP:9443) however it is getting posted to (https://IP:9443/) where the service is not available. For Reference attached relevant screenshots.
Is there any way to create a HTTP_AAE Receiver without a path. Need ardent support and suggestions
regarding this.
Regards
Riju

Hi,
For Service auto- PO from PR, you need to activate Automatic Purchase order creation for Service requisitions in ML91 t.code.
Note:
For material :automatic PO creation from PR, follow the steps.
1) Material Master purchasing view tick automatic PO check box
2) Vendor Master purchasing view tick automatic PO check box.
3) Maintain Source list for Vendor & Material.(ME01)
4) Maintain Purchase Info Record.(ME11)
5) Create a Purchase Requisition.(ME51)
6) Use T.Code: ME59 & execute for PR for vendor, you will be able to create automatic PO.
During creation of PR , select check box of Source Determination in the 1st screen of ME51
Ensure that Purchase Info Record should be there.
If you have more than one vendor then fixes only one vendor in source list.
Regards,
Biju K

Create type not working

I'm following the 8.1.6 documentation to create type, but it always returns me the error.
My references are from :
http://technet.oracle.com/docs/products/oracle8i/doc_library/817_doc/appdev.817/a76976/adobjmng.htm
The script is:
CREATE TYPE location (
building_no NUMBER,
city VARCHAR2(40) );
The error is:
1/15 PLS-00103: Encountered the symbol "(" when expecting one of the following:
; is authid as compress compiled wrapped
4/0 PLS-00103: Encountered the symbol "end-of-file" when expecting one of the following:
pragma
May I know that how can I work around it?
I had tried earlier another syntex successfully:
create type typeName as object(definition....).
May I also know what's the difference between these 2 commands?
Thanks in advance
Minny

I think there's a mistake in the documentation. I may be wrong but I think it should always be CREATE TYPE x AS OBJECT (...)

Creating Types and Internal table

Hi,
I created
Types: begin of itab,
           field 1 ...
            Field 30,
        End of itab.
Data: lt_itab type table of itab.
I need to create a second type itab1 with all the itab fields and also new fields field31 and field32.
I dont want to declare all the 30 fields again for the second one.
Can any one tell me how to create this?
Thanks.
rajesh

You can INCLUDE TYPE.
Types: begin of itab,
       field1 type string,
       field2 type string,
*      More Fields in here.
       Field30 type string,
       End of itab.
Data: lt_itab type table of itab.
TYPES BEGIN OF new_itab.
       INCLUDE type itab.
TYPES: field31 type string,
       field32 type string,
END OF new_itab.
Regards,
Rich Heilman

Create TYPE

I am not able to create type objects tried with different versions of oracle too.
Currently I am using Oracle 11g Enterprise edition (2.9GB).
The problem is when i create a TYPE object and when i terminate the command with a semicolon ';',oracle sql does not stop only (the query does not execute) the loop goes on and on.
I did like this and found that the SYNTAX is also perfect.
SQL> CREATE TYPE address_type AS OBJECT
2 (street varchar2(30),
3 city varchar2(30),
4 pincode number(10));
5
6
7
8...
It goes on and on it never ends. Command never executes.
Please Help!

end the command with "/" :
create type .....
/

Creating type along or inside a path

Similar Messages

Maybe you are looking for