Creating, updating and laying out an index

Hello everybody,
I have to create and lay out an index of several files in a book.
What do I have to do?
How can I update the index? (I use Framemaker 8)
Thank you for your help.
Bye
Vreni

Reading the Help file or Manual is a good suggestion, but in very simple form, this is what you do.
Place Index marker in the text at the desired locations (Special>Markers set to index and enter text).
After you have your marker in place, add a Standard Index (Add>Standard Index and select the index marker type).
Once the Index is part of the book, it updates with the book, same as your TOC.

Similar Messages

HT5071 I almost finished my iBook and layed out almost 100 pages. Now I wanted to edit chapters and Sections by moving them into certain areas of the 100 pages. It will not work, adn I have no clue where to go from there. Any advise?

I almost finished 100 pages on the iBook Author. Unfortunately, I just created one page after the other (with lots of graphics and pictures). Having done that, I wanted to edit the iBook by placing Chapters and Sections between these pages.
I used iBook Author Help and Publishing with iBook Author for advise, but I am unable to move Chapters and Sections between the already finished pages. I get the strange feeling I did the whole thing wrong and wasted many hours for nothing. Anyone out there who struggled with the same problem? I self published a book already and wanted to use iBook Author to update and upgrade my existing book. Any advise is very much appreciated, thank you. Wolf

You may also try starting a "fresh" copy from scratch and copying and pasting into it with the order you want. I have succeeded in this a few times.
Hope this helps...

Photo album & gallery views mess up with links and lay out

Hi,
Am having a weird problem in album/gallery function.
I added links on the album page, but after viewing the gallery, reverting back to the album the link stopped working (main problem), and in the gallery page the link does not appear in cases or is lay-outed very close and then more below.
Obviously I tried already by duplicating my 2 pages that work quite well and remake the other pages, but the problem persists.
Anybody can help ?
Following is a description:
http://web.mac.com/drieke.tom/Caravanserai/Gilles_works.html
Album view is fine, link at the bottom works.
Click through to gallery of photos: link at the bottom of page is gone.
Going "Back to Album": link at bottom does not work
On following page s. th similar happens
http://web.mac.com/drieke.tom/Caravanserai/collaboration_works.html
Click through to gallery of photos: link at the bottom of page does work, but is now much lower on the page.
Going "Back to Album": link at bottom does not work
In my other similar pages it works,
though there are some minor gliches as well:
1/
http://web.mac.com/drieke.tom/Caravanserai/Tom_works.html
You click a photo in the album and it shows the enlargened photo with tumbnails. Though my link at the bottom is very close to the photo.
Browse through the photos and when you do "Back to Album", it goes back to the album at once, and with my link at the bottom, it reverts to the main page: "Exhibition"
2/
http://web.mac.com/drieke.tom/Caravanserai/Gilles_press.html
In photo gallery mode, link at bottom is there and works, but very close to photo title.
Going "Back to Album": link at bottom does work !!
WHAT GOES WRONG ?
ANYBODY CAN HELP ?
Thanks
Tom

Tom:
Have you tried doing a "Publish All to .Mac" or publishing to a folder on the desktop and seeing it things work there. Often the Publish All will fixe issues I'm having.
OT

Create, Update and Delete Partner functions for a Functional location.

Hello
I have a requirement where I need to
a. Create / Assign Partner functions to a Functional location,
b. Update the new Partners values ( PARNR ) for particular Partner Functions ( Replace new Partner values in place of old partner values )
c. Delete the Partner values and Partner functions for a Functional location.
when the above changes are done, the changes should be reflected in IFLO ( Table-IFLOT ) and IHPA ( Table-IHPA ) transactions .
I wanted to make the above changes by using FM's or BAPI. I have searched many forums and threads, but still I was not able to get the correct solution.
Can anyone help me out in finding BAPI or FM's to do the above changes. ?
Note : I will have an excel sheet which has coloumns like Functional location, Partner function, Old Partner value ( PARNR ) and New Partner value (PARNR ). This data needs to be updated in IFLO and IHPA.
Thanks and Regards,
Karthik Ganti.

Hello
I have a requirement where I need to
a. Create / Assign Partner functions to a Functional location,
b. Update the new Partners values ( PARNR ) for particular Partner Functions ( Replace new Partner values in place of old partner values )
c. Delete the Partner values and Partner functions for a Functional location.
when the above changes are done, the changes should be reflected in IFLO ( Table-IFLOT ) and IHPA ( Table-IHPA ) transactions .
I wanted to make the above changes by using FM's or BAPI. I have searched many forums and threads, but still I was not able to get the correct solution.
Can anyone help me out in finding BAPI or FM's to do the above changes. ?
Note : I will have an excel sheet which has coloumns like Functional location, Partner function, Old Partner value ( PARNR ) and New Partner value (PARNR ). This data needs to be updated in IFLO and IHPA.
Thanks and Regards,
Karthik Ganti.

I lost one of my calendars and every time I load the back up, I cloud updates and wipes out the calendar I am trying to restore.

As long as I stay off the cloud, I can keep my back up calendar. As soon as I open the cloud, the update wipes out the one am trying to recover. I use three-- and the most important one, appointments, somehow went a way. Fortunately I have a recent back up. maddening

If you synchronize any of your calendars with a server such as iCloud, disable that synchronization. Quit Calendar.
Triple-click the line below to select it: ~/Library/Calendars Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder selected. Enter Time Machine and restore that folder from the snapshot you want.
Relaunch Calendar and test. Your calendars should be as they were when the snapshot was taken. If you don't sync with a server, stop here. If you do sync some of the calendars with a server, select each one in turn and then select
File ▹ Export ▹ Export…
from the menu bar. You'll get ICS files with the filename extension ".ics". Re-enable sync. Usually, all the calendars you just restored will be deleted. That's not a problem. Create a new calendar on the server for each one you exported and want to sync:
File ▹ New Calendar
Then import the calendar from the corresponding ICS file by double-clicking it. Follow the prompts to import the new events to the calendar you just created. For calendars that you don't want to sync, just import them again. They'll appear in the calendar list under On My Mac.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Creating Update and deleting Records Forms

Hi Guys
Hopefully some one can help me with this, I am using php and
mysql, I already have a page that shows all the records of
customers details, which I can navigate through the pages of
records.
I have created a update page, using the update wizard, which
works but only shows the first record. I have added a repeat region
and page navigation which allows me to choose individual records
but wont update those records.
I also took a look at a tutorial video that had you adding an
extra column and add the word update to add a hyperlink that took
you to the update form with that particular record for updating,
the video was using cold fusion the link was update page address
then this ?ID=#ID#, I tried different versions of this with no
success.
I also tried to alter the record set and added a filter using
Member_ID and = paramater URL, this made my cusomter detail page
stop working.
can some one help please
Cheers
Mark

burkeslaw wrote:
> Is it that I have to create the update form manually and
then select it and
> add the update form behaviour? Is there an Go to
Detailed Page server behaviour
> for php, or is this just for ASP technology.
I'm not familiar with the ASP server behaviors, but there is
a Master
Detail Page Set for PHP (it's on the Insert > Data Objects
menu).
Creating an update page is very easy.
1. Create a page that lists all records in the database.
2. Alongside each record, create a link to the update page.
3. When creating the link, click the Parameters button inside
the Select
File dialog box.
4. In the Name field of the Parameters dialog box, type the
name of the
primary key (ID).
5. Click the lightning bolt icon to the right of the Value
field, and
select the primary key from the recordset.
6. Click OK twice to close both dialog boxes.
7. Save the page and test it in a browser. When you mouse
over each
link, it should display a URL that looks something like this:
update.php?id=3. The name/value pair after the question mark
pass the
details of the record as a URL parameter to the update page.
8. In the update page, create a recordset that uses the URL
parameter as
a filter to select a single record depending on the value
sent from the
previous page.
9. In the update page, create a hidden field to store the ID
from the
recordset (click the lightning bolt icon alongside the Value
field to
insert the dynamic data).
10. Apply an Update Record server behavior. Make sure the
primary key
gets its value from the hidden field in the form.
Alternatively, if you don't want to build your own update
form, replace
steps 9 and 10 by using the Record Update Form Wizard (Insert
> Data
Objects > Update Record > Record Update Form Wizard).
David Powers
Adobe Community Expert, Dreamweaver
http://foundationphp.com

My ipod mini just updated and wiped out all 742 songs off ipod

how can i recover my songs after update wiped them off my ipod mini?

Resync them from your iTunes library. If the songs on the iPod were not in your current iTunes library (or backed up elsewhere), they are probably gone.

How to handle multiple updates and creates sequentially

Hi All,
I have a requirement where multiple updates and creates will happen on an Order (say Purchase Order). I need to capture all these updates/creates and synchronize the other system in real time. In other words, as soon an order is updated/created in EBS, the same needs to be reflected in other system database.
I have thought of using a JMS queue that'll store all the incoming creates/updates and a BPEL process will keep polling this queue. But in this case how do I ensure the sequence in which the new instances will be created. e.g. create order message was picked first from the queue and an instance got created. While this instance was in execution, another update happened on the same order for which another instance got created. Now before the first instance could get completed and created an order, second instance is trying to update the custom database because of which it would fail. How to restrict second instance from running before the completion of the first one?
I have also thought of capturing Order Update/Create business events from EBS but there also the same problem. Instance created by Update event can try to do the update before the instance created by Order Create could create a new order.
Any method to solve this.
Any pointers/suggestions/approaches are more than welcome.
SOA Suite 11.1.1.3
Regards,
Neeraj Sehgal

maybe unit of order and unit of work can help you on that, though i haven't any experience on both topics :
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/jms/uow.html
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/jms/uoo.html
or the mediator supports some sort of sequencer, see : http://www.xenta.nl/blog/2010/05/14/oracle-soa-suite-11g-resequence-messages-in-mediator/

Need advice on choosing programs for laying out and editing books

I've been editing books in Microsoft Word but my clients are asking me to help do the layout and prep to take their books to a printer.
I am looking to find out what the least expensive (for now) but necessary programs I would need to purchase in order to take a book from a Word manuscript to print-ready.
Please let me know what programs I need (at a minimum) - someone mentioned InDesign and InCopy, would I need anything else?
I will also need to purchase a new laptop and need to know what the minimum requirements would be to run such programs i.e. how much hard drive space, speed and ram.
I currently have a Gateway, but it is dying.
Thank you.

As Daniel says, if you have InDesign and you're the only one working on the docuument, that's all you need. Think of InCopy as a hugely-stripped-down version with only the text editor in it, but you can do everything you need in InDesign (either writing the text directly into the document, or importing formatted text from Word). InDesign has great typography features and a basic spellchecker, Word has less-advanced typography but can check grammar.
The typical workflow in a newsroom will split copywriting from layout, as the journalists aren't allowed to format the page and the graphics dept can't write articles. So, the text is written in InCopy by a bunch of people, who then pass the content to someone with InDesign who imports it and lays out the issue. InCopy basically allows people to write a chunk of text that will fit in a certain space, but it doesn't care what the overall document looks like. It has some very powerful features for collaboration, but to put it bluntly, text is text - provided you get the styles mapping sorted, ID doesn't care where it comes from.
Unless you're working with this split-job-role system there's no reason you'd need to use InCopy.
OLIVE C. F. wrote:
Thank you for the tips. I will need InCopy then as that is a major part of what I do.
Sent via DroidX2 on Verizon Wireless™

Why are my book preview photos over exposed and washed out requiring a revert to original to fix

After I create the book and preview it before purchasing a large number of the photos are severely washed out or over exposed leaving only purple and yellow colors.
I tried purchasing the book but a few days later an email came back:
Due to an error when your order was submitted, your image file is unreadable or unprintable.
To fix the corrupted images I have to go through every bad photo (looking at the preview of the book to tell which are "bad") and lift adjustments, revert the photo to original and then stamp the adjustments back onto the photo.
The photos look normal while editing the book and laying out photos.
The generation of the preview takes up to 18 hours for 250 photos sometimes.
I am now on my third book where this has happened.
Thanks

There have been a few similar problems reported, but I have not seen any easy fix so far.
What kind of image files are you using? RAW files? Images taken with an iOS device?
If the images have iOS adjustments, the images may need reprocessing, alos, if there has been a RAW support update the originals may need reprocessing.
See these similar discussions:
Re: Unable to Order Book from Aperture
https://discussions.apple.com/message/24082431#24082431

Sub: Tax Combinatiom. Tax rate, tax Amount in the print lay out design of t

Dear all,
Sub: Tax Combinatiom. Tax rate, tax Amount in the print lay out design of the A/R Invoice
I have to Create a Print Lay out design of the A/R invoice for the Indain standrad please provide me some solutions for the following problems to locate the Tax combinations,Tax rate and the Tax amount in the PLD A/R Invoice ,
PACAKGE SAP B1 2005B
Need a standrad solution as per the requriment
Eg: Row Level
Tax Code created is BED+VAT
Tax combination details is
Name of Tax type   Rate
Excise                     16%
Ecess                    2%
Hcess                    1%
VAT                       4%
Row No     Item Qty   UnitPrice Tax code Total(LC)    Tax Amount
1             X      10     10000      BED+VAT   100000      21139
                                         (Excise =16000,Ecess=320, Hcess=160, VAT=4659)
2              Y      5      20000      BED+VAT    200000       42278
                                        (Excise =32000,Ecess=640, Hcess=320, VAT=9318)
In Print Lay out Design Requried is the deatils of Tax code combination , Rate and the Tax Amount in the followig way
Excise    16%   =48000
Ecess     2%    =960
Hcess     1%    =480
VAT       4%    =13977
Please send the feedback as early as possible urgently requried
for the further details send the feedback
Reagrds
Mr.Chitrasen

Hi experts,
       Pls anybody have an answer to my question, i'll be very thankfull to u,
                 I wanted to display the Tax Break ups in Invoice say,
ECess            25
Vat                 56
Excise duty    32
I've tried a lot with many of the SAP Forum thread but the results is not satisfactory..am using SAP Business One 2007 b
pls anybody who can guide me with step by step PLD creation for this problem.
I done the below steps in PLD
In Repetitive area 1
Field_1: Table-> OSTA
              Column-> Type
Field_2 : Table-> OSTA
              Column -> Code
Field_3: Table-> OSTA
              Column-> Rate
Field_4: Table-> OSTA
              Column-> Name
Field_5: Table-> A/R Invoice Tax amount per document
                Column-> Tax amount
Field_6 : Table-> A/R Invoice Tax amount per document
                Column-> Base amount
Field_7 : Formula -> Field_6 * Field_8
Field_8 :   Formula-> Field_1==1
      NOW I SORTED REPETITVE AREA 1 WITH 'SALES TAX AUTHORITIES;cODE' AND TICKED THE CHECK BOX 'SUMMARY'
    AND MADE THIS REPETITIVE AREA INVISIBLE.
IN Repetive area footer
F_01 :    Formula->   Field_4
F_02 :    Formula->   Concat(Round(F_rate,0), '%')
F_03 :    Formula->   Round(ColSum("F_tax_amount"),2)
I grouped the Repetitive area footer as Group 1
                            here i get the result but the Tax Rows are repeating and Tax amount varies for VAT for each rows
pls help me guys...
               Thanks in advance,
               Dinesh
Edited by: Dinesh S on Dec 23, 2011 1:28 PM

How to update and delete using rest services in SharePoint 2013..

I am looking to create,update and delete data in SharePoint list where i am using below code for creating data..I should be performing three operations on single button click how can i achieve this.Below is the code i am using for creating data to list and
displaying in CEWP.
<html>
<head>
<style type="text/css">
#mytable{
border : 1px solid;
</style>
<script type="text/javascript" src="https://sharepointapp28.sharepoint.com/sites/Dev2013/SiteAssets/Scripts/jquery-1.11.1.min.js" ></script>
<script type="text/javascript">
var ListName;
var webUrl;
$(document).ready(function(){
SP.SOD.executeFunc('sp.js', 'SP.ClientContext', sharePointReady);//Doubt
function sharePointReady() {
webUrl = _spPageContextInfo.siteAbsoluteUrl;
ListName = "test";
$('#btnSub').click(function () {
updateItem();
function updateItem() {
var name = $('#txtName').val();
var Desc = $('#txtDesc').val();
var city = $('#txtCity').val();
var itemType = GetItemTypeForListName(ListName);
var item;
item = {
'__metadata': { "type": itemType },
'Name': name,
'Description': Desc,
'City': city
var xmethod = 'POST';
jQuery.ajax({
url: webUrl + "/_api/web/lists/getbytitle('" + ListName + "')/items",
type: "POST",
data: JSON.stringify(item),
contentType: "application/json;odata=verbose",
headers: {
"Accept": "application/json;odata=verbose",
"X-RequestDigest": $("#__REQUESTDIGEST").val()
success: onUpdateMSOPProcessSuccess,
error: onUpdateMSOPProcesFail
function onUpdateMSOPProcessSuccess(data) {
alert('successfully updated to MyList!!!')
function onUpdateMSOPProcesFail(data) {
alert(data.d.err);
function GetItemTypeForListName(name) {
return "SP.Data." + name + "ListItem";
</script>
</head>
<body>
<table style="width:500px" id="mytable">
<tr><td colspan="3"> </td></tr>
<tr><th colspan="3">Rest API</th></tr>
<tr><td colspan="3"> </td></tr>
<tr><th>Name</th> <td> : </td> <td> <input type="text" id="txtName" /> </td></tr>
<tr><th>Description</th> <td> : </td> <td> <input type="text" id="txtDesc" /> </td></tr>
<tr><th>City</th> <td> : </td> <td> <input type="text" id="txtCity" /> </td></tr>
<tr><td colspan="3"> </td></tr>
<tr><th></th><td colspan="2" align="left"><input type="button" value="submit" id="btnSub" /></th></tr>
<tr><td colspan="3"> </td></tr>
</table>
</body>
</html>

Hello,
With one button you want to perform 3(Create, Update and Delete) operation
To create:
First check whether the data exist with full combination of Name,Desc and City.
If not exist you can execute the create function.
If exist, get confirmation to delete the item by pop up. Using item ID you can perform Delete operation
To Update:
How you want to update the item, by keeping unique value or combination of columns?
based on that you can perform the update operation.
Whenever you see a reply and if you think is helpful, click "Alternate TextVote As Helpful"! And whenever you see a reply being an answer to the question of the thread, click "Alternate TextMark As Answer

Designing base VO for a page in create/update/view modes involving LOVs

Hi All,
We are developing a complete custom OAF page which is based on information in a single table.
The page will be used in create,update and view modes. 70% of the page fields are lov fields and hence I wanted to clarify my doubts before proceeding any further in development.
The page is based on a single table.
Example : XX_SUPPLIER_INFO(Columns : Supp_id,Supplier_trained_by_id,Service_manager_id,...etc).I created this as a EO based updateable VO
In the page "Supplier trained by" and "Service_manager" are LOV fields (messageLovInput style) that are based on plain SQL VOs.
Those LOV-VOs return displayable names and ids(key value) for those names and the IDs alone are stored in the base table(XX_SUPPLIER_INFO).
I am pretty sure of the above design will work for creation.
In update and view modes for the page will the lov field mapping help in automatically fetching the displayable names?
If not how should I design my Base page vo?
Any help on this is appreciated.
Thanks,
Haritha

Editing Oracle seeded files is not recommended as they are not upgrade/ patch safe. Read OTL impl white paper for your custom LOV requirements, They have explained well.
--Mukul

BBP_SOCO_APP_ITEM_COMPL_MAIL - complete mail lay-out

Hello,
We had to customize the BBP_SOCO_APP_ITEM_COMPL_MAIL completion text. However there is one more requirement. The paragraphs and lay-out configured and previewed in transaction SE61 is not recieved in the e-mail. The mail contains a PDF (which is a bit strange already from my perspective) but most importantly the text is included without any paragraphs.
How come? is there a work-around?
Kind regards,
Tim

resolved.. Had a bright moment and concluded it does insert a paragraph but it needs two paragraphs to clear a line.
However i'm still interested in knowing why SAP choose to use a PDF attachment in this particular case. Wouldn't the text as regular e-mail text be better?
Kind regards,
Tim

My Firefox is crashing every five minutes. No plug ins, lap top is new drivers updates and current version of firefox. How do I stop this?!

I recently updated my firefox after doing updates and cleaning out my computer. Firefox was working fine with the old version not problems. Now I am lucky to be online for more than five mins before it crashes. Doesn't matter what page I'm on or what I am doing. No plug ins currently installed as I have only had this for two days and can't be online long enough to do anything. I hate explorer please help me fix this issue.

hello, unfortunately this seems to be a crash that is appearing in firefox 19 on windows 8 with AMD Radeon HD 6XXX/7XXX graphics cards - developers are investigating the causes of it...
the best option probably is to downgrade to the to the former version at the moment until this gets sorted out: [[Install an older version of Firefox]]
ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/18.0.2/win32/
the auto-update in firefox 18 for the affected systems is now disabled and will be turned back on when a fix is available.

Creating, updating and laying out an index

Similar Messages

Maybe you are looking for