Creating user for existing schema

Hi,
A colleague of mine created a schema and now we would like to create a user with the same name. How can this be done? When I try it it says that I cannot create a duplicate schema, but dropping the old one is not an option because it's already been filled with data.
Thanks,
Michael

You can't. When you create a user, the system must automatically create a schema with the same name. This is used for certain system, temporary objects. You therefore can not have an existing schema with the same name.

Similar Messages

Create user for CPS in _ UPPER CASE LETTERS _ if using JSM on SolMan

only create users for CPS in UPPER CASE LETTERS if using JSM on SolMan
Dear CPS Admins,
If you plan to use Job Scheduling Management (JSM) on SAP Solution Manager together with CPS by Redwood please always create any users in CPS only with upper case letters to avoid issues in the communication between SolMan and CPS.
The user creation for CPS is done in the UME (Java user administration, alias /useradmin).
Actually the CPS user itself is only created in CPS during the first logon.
Both CPS and the Java UME are case sensitive. So you can create users in uppercase, lowercase or mixed letters. But of course the system does still not allow duplicate names. So you can either create MUELLERP, MuellerP or muellerp - but not multiple of them.
Now, if the SolMan communicates with CPS for Job Scheduling, the actual user name is taken in some kind of a "trusted RFC like" way and checked on the CPS system connected to the SolMan. If the current SAP user does not exist on CPS no activities are possible, neither in read mode (read existing CPS jobs) nor in write mode (change existing jobs or create new ones).
Unfortunately the Solution Manager transmits the current user name to CPS only in upper case letter. So if the CPS user was not created in UPPERCASE letters in CPS the communication will fail. Therefore, think about creating CPS users in UME only in UPPERCASE letters. Changing this later is difficult to impossible.
Best regards,
Peter

hi,
I tried to reproduce your issue but I was not able to create a UME user with lower case letters.
UME automatically converted the user name into upper case after saving. So even if I enter "cps" as user name UME stored the user name as "CPS".
(maybe that happend because of the existing SU01-UME integration in our SolMan system)
If UME would be case sensitive I would expect that it is possible to create the user "CPS", "cPs" and "cps".
Regarding the SolMan-CPS connectivity:
Transaction SU01 allows only upper case letters (in user name and alias). Since you're starting from an ABAP system only user names with upper case letters are supported. It's a technical constraint of the ABAP user management that user names consist of upper case letters only.
Kind regards,
Martin

Error while creating user for a domain

i am developing a web-application which is hosted on tomcat server.
it is creating domains and users at another remote domain server.
localy it is working fine..
but when i test it online..
the problem is,
sometimes it works fine ,the domains are being creted at remote server..
but sometimes it delivers error that domain at remote server can not be created.
Is it due to fact that theat some errornous code in the buffer of application have older versions of applications causing the error ?
Code::
if(strPlanId.equalsIgnoreCase("3")) {
 //Create domain account for planid=3 plantype=Cp
 blnOK=false;
passwordGS comes from database
strUrl="http://sosync.net/sosync/admin?pwd="+passwordGS+"&action=user_createdomain&domain="+strSubDomain+".gosync.net&adminpassword=aspire3002&diskquota="+longdk;
 u=new URL(strUrl);
 uc=(HttpURLConnection)u.openConnection();
 code=uc.getResponseCode();
 if(code == 200) {
 rUrl="/TransCompleteServlet";
 blnOK=true;
 uc.disconnect();
 } else {
 rUrl="/GSView.jsp?page=GSError.jsp?REQ=Unknown";
 if(blnOK) {
 String strUrlUser="http://gosyncdesk.net/gosync/admin?pwd="+passwordGS+"&action=user_createuser&username="+strEmailId+"&password="+strPassword+"&domain="+strSubDomain+".gosync.net&communityname=Default&firstname="+user.getFirstName()+"&lastname="+user.getLastName();
 URL u1=new URL(strUrlUser);
 HttpURLConnection uc1=(HttpURLConnection)u1.openConnection();
 code=uc1.getResponseCode();
 response1=uc1.getResponseMessage();
 if(code == 200) {
 rUrl="/TransCompleteServlet";
 String strUrlTZ="http://gosyncdesk.net/gosync/admin?pwd="+passwordGS+"&action=user_setuserpreference&username="+strEmailId+"&domain="+strSubDomain+".gosync.net&name=web_timezone&value='"+timeZone+"'";
 u=new URL(strUrlTZ);
 uc=(HttpURLConnection)u.openConnection();
 code=uc.getResponseCode();
 if(code != 200) {
 rUrl="/GSView.jsp?page=GSError.jsp?REQ=Unknown";
 } else {
 rUrl="/GSView.jsp?page=GSError.jsp?REQ=Unknown";
 mailUtil.sendMail_admin("Error In Creating User for the Domain","While creating domain for "+user.getEmail()+" user could not be created due to following reason: "+response1+" GoSync UserName:"+strEmailId+" GoSync Password:"+strPassword+" GoSync Domain :"+strSubDomain+".gosync.net and URl String was :"+strUrlUser+"");
 }

if the problem is caching try setting the useChasses to false
uc.setUseCaches(false);

Create users for my application

Hi! I'd like to make an administrative page so I can create users for my application. Let's say that I have following fields: username, first name, lasta name, password, etc.
Does anyone have an example? Or a short description about what I have to do.
Thanks a lot!

Thanks Jes. I looked at that thread. As it's said there, I created my custom table of users and a function with 2 parameters(username and password).
I was thinking to make a process which calls my function and take as parametres the (:P101_USERNAME,:P101_PASSWORD). I wrote some code in my function. But when I want to create the process, I got the next error:
ORA-06550: line 3, column 1: PLS-00103: Encountered the symbol "END" when expecting one of the following: := . ( % ; The symbol ";" was substituted for "END" to continue.
My function is this:
create or replace function "AUTENTIFICATION"
(p_username in VARCHAR2,
p_password in VARCHAR2)
return BOOLEAN
is
if p_username IS NULL or
p_password IS NULL then
return false;
end if;
if p_username NOT IN
(select username
from users) then
return false;
end if;
if p_password NOT IN
(select passw
from users
where username = 'p_username') then
return false;
end if;
And in the PL/SQL Page Process I'm trying to put the following:
AUTENTIFICATION(:P101_USERNAME,:P101_PASSWORD) , when I get the error.

Needed validation when creating user for employee in HRUSER transaction

hi All,
I wanted to put validation in HRUSER TCode when we are creating user for an employee by selecting exit module for user name and password
in my scenario I want to remove the first alphabet of user name that is P and with that I want to set a default password can anyone suggest me includes.
Please find the attached snap.

Solved it for myself
refer the link:
Dear all,
Regards,
Siva

Create users for teradata in ADAM / Acitve Directory

Hi
I was wondering if you could help me with the ability to create a user in AD / Adam? I am trying to write the powershell code to create users for Teradata connectivity. the manual process is to use adsiedit and create the users through groupof names class.
This is what I have that is NOT working and was looking where to go from here.
$dom=[ADSI]"LDAP://OU=Users,OU=dev,OU=tdev,dc=acme,dc=com"
$obj = $dom.Create('GroupOfNames', 'CN=ASmith')
$obj.SetInfo()
any help would be greatly appreciated.
Thank you
John R Remillard

Hello,
You should ask in the
Windows PowerShell forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Create two users for same schema

Hi All,
Is this method is correct? any other alternative method to have few users with one schema?
CREATE USER [user1] FOR LOGIN [user1] WITH DEFAULT_SCHEMA=[schema1];
CREATE USER [user2] FOR LOGIN [user2] WITH DEFAULT_SCHEMA=[schema1];
CREATE USER [user3] FOR LOGIN [user3] WITH DEFAULT_SCHEMA=[schema1];
Thanks
Tharindu Dhaneenja http://databaseusergroup.com

Hi Tharindu,
According to your description, it seems that you want to transfers ownership of the schema ‘schema1’ to user user2. If that is the case, please refer to the following query:
ALTER AUTHORIZATION ON SCHEMA::schema1 TO user2;
GO
Reference:
ALTER AUTHORIZATION (Transact-SQL)
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Creating Folder for Existing Folders

Is it possible to create a new folder for AR for iOS so that you can move already existing folders into it? My folders have become a bit cluttered as I had to create more for specific files, but they should all be filed under another bigger folder. Thanks!

Question: "Is it possible to create a new folder for AR for iOS so that you can move already existing folders into it?"
Answer: (Assuming that you are referring to the PDF documents and folders that you access inside Adobe Reader for iOS) Yes, you can create nested folders using the file browser user interface in Adobe Reader for iOS,
In the main screen (showing Documents, Acrobat.com, Camera to PDF, My Account, Help), you can create a new folder.
Tap Documents.
Tap Edit in the upper right corner.
Tap the folder icon with a plus sign in the bottom toolbar.
Enter a new folder name.
You can navigate to an existing folder and repeat the steps above to create nested folders in Reader. You can select multiple files and move them to the newly created nested folder as well. But it's not possible to move a folder containing files to a different folder at once.
See Help > Handbook > Copy, edit, delete, manage for more details.
If you use Acrobat.com as a cloud storage service, you can create nested folders using the web browser interface (https://files.acrobat.com/), organize your files and folders, and access them in Adobe Reader for iOS.
Hope this helps.

Error in creating user for solaris

Hi.....
I am using IDM 6.0 version and configured resource solaris in IDM...but when tried to assign a user to solaris....the user is getting created in solaris box and resource exit for that user...but when tried to click on user for display or to update getting the Error
ERROR:Unresolved rule: getDefaultShell.
I dont know what to do...can any one help me please.....

I got solution to my question i had to import shellrule file from /sample directory to IDM.

How to create users for iFS9R2???

On iFS9R1 and earlier it was possible to create users from the web GUI using an administrative user's account. On iFS9R2 it wasn't possible, I only could create groups or folders, there wasn't even a menu entry under "new".
Or did I miss or faulty configured something?
+Lutz

Matt,
I'm using the iFS credential manager. And yes, I can create users using the iFS Manager tool. But with earlier releases it was also possible to create users from the iFS web GUI. Strange thing is that from the iFS Manager it is not possible (at least I didn't find one right now) to delete users, from the web GUI it is!
Anyway, seems the best way would be OID as this is also be used by the new iAS and it might avoid the need for having two seperate user managements.
Thanks for the hint!
+Lutz

How to create users for B2B console in SOA Suite 11g?

Hi,
I have installed SOA Suite 11g and created a new user in weblogic server and assigned groups Deployers, Monitors & Operators. On trying to login(http://hostname:port/b2bconsole) using this new user, im not able to login and the below error is logged.
"There are no trading partners for this user".
Can someone plesae guide me on how to create a new user for B2B as i dont want to grant adminstrators group to developers.
Thanks,

Hi,
Please login as the weblogic server boot user into b2bconsole and then go to users tab of the host trading partner
and search for the newly added user [ provide full username ]
and then assign the role as administrator / monitor from there.
once this is done.. the newly added user should be able to login to the b2bconsole..
monitors have read only access and less priveledges..
Regards,
Vijay

Create users for other clients from client 000

Hello!
I have the following question:
What is the Tcode allows me to see all created users (perhaps wuth their password) in all clients from e.g. client 000?
Is it possible to create new users for other clients from client 000?
Thank you very much!
regards
Thom

SU10 User Mass Maintenance
SCUA Central User Administration
SCUM Central User Administration
SCUG Copy users
SU01/SUCOMP User Maintenance/User company address maintenance
SU01D User Display
SCUL Central User Management Log

Admin can create user for specific company

Hi all,
I have requirement to provide authoriaztion to 3 basis admin in the way that they can use su01, pfcg or any basis related tcode but one should be restricted to one company say 'A' only... i.e. I have 3 basis admin A, B and C on single system and 3 comanies say DEF, PQR and XYZ . Now A can create use id for DEF company only...same for the rest of the user and company..
Is it possible n what way ?
Rgds
D L

Of course this can be done.
Here you would be using the S_USER_GRP authorization object.
Giving access this authorization will allow user A to only manage users in group DEF
S_USER_GRP
ACTVT 02
GRP 'DEF'
Giving access this authorization will allow user C to only manage users in group XYZ
S_USER_GRP
ACTVT 02
GRP 'XYZ'
Create user groups via transaction SUGR.
Read more at:
http://help.sap.com/saphelp_nw70/helpdata/EN/fa/f63f4222fab16be10000000a155106/frameset.htm
Good luck
Regards Fredrik

Creating Users for Oracle DB residing in xMII server

Hi,
We are on xMII 12.0.3 Build(107). We have the Oracle 10g database residing in the xMII server. Now, in order to create users to access the DB, do we have to create in SAP front or externally create users on oracle front?
Thanks in advance,
Regards,
Prasanna

create users on oracle front.

How to get the New created Hier for existing IO and IS in the Infopackage

hello Gurus,
I have created a new Custom hierarchy on an existing InfoObject 0Costcenter. There are many Hierarchies already existing and being fed from R3. This new hierarchy is just a regrouping of costcenters.
Now I have created this new Hier and activated it, When I tried to create a Infopackage to load this new Hier, I am not finding the new created Hierarchy in the Hierarchy Selection tab of Infopakage.What should I do to see this new HIer.
Thanks
Simmi

so, the costcenter hierarchy created by the user is not a std costcenter hierarchy, so it should be a set hierarchy. go to tcode BW07 in r/3, give the name of the table and field, if you like the name of the datasource too orelse the system woudl generate it. But the costcenter hierarchy is compounded to controlling area, you would need to write a user exit to populate the compounding object too in the datasource, orelse all the costcenters would be unassigned to controlling area. once created, you can check the same in rsa6. once you see it there, replicate the DS to BI, and after that the data flow is same. create a new infopack to load the set hierarchy, as you wont be able to see this hierarchy in the std costcenter hierarchies.
check a few other threads:
Tcodes BW10/BW07 - how to use these
compounding for hierarchies:
ZXRSAU04 - programming for compounding in hierarchy

Creating user for existing schema

Similar Messages

Maybe you are looking for