Creating Variant for VA05???
Hi SAPians,
Could you please give me the step by step process on how to create variant for VA05 for column layout.
Thanks in advance
MM.
hello, friend.
first, execute VA05. customize your layout by clicking on the "current" icon.
next, save your layout by going SETTINGS > DISPLAY VARIANTS > SAVE. please note that unless your user parameters include the appropriate profile, the "save" option remains greyed out and unavailable. ask your BASIS consultant to assign you parameter = SD_VARIANT_MAINTAIN with value "A". then you can save your own variant.
regards.
p.s.
i got this idea from someone else. i think it was lakshmipathi. whoever it was, thanks.
Similar Messages
-
Dear Sap Guru,
I am creating variant for Va05 but saving option is coming grey.
So i went to SU02 in parameter tab & I maintain SD_variant_maintain- a but still it is showing grey so what to do. It's urgent.
Regards
rdcHello,
please check your user profile and maintain the parameter
SD_VARIANT_MAINTAIN with a value of 'A' in the following path:
> system
> user profile
> own data
> parameter tab
If you have set the parameter you can save your own display variants.
Please have a look at the note 113965 concerning the problem.
To createa display variant please check the note 300633.
But please notice that the SAP-variants cannot changed in the SAP-
area.
I hope that the information are helpful for you.
Regards
Claudia
If you are satisfied with the answer, please give Reward Points -
How to create column selection variant for VA05?
Hi Experts,
How do I create column selection variant for VA05?
Thanks,
SachinHi,
Goto SU3, enter user name and press enter
goto parameters tab, enter parameter ID SD_VARIANT_MAINTAIN and parameter value 'A' and save.
Now check in VA05, you will get save button in active mode.
Regards,
Chandra -
How to create variant for table/view ?
Hi,
When I go through SM30, I find a radio button called variant. I don't know the effect.
Can anyone tell me how to create variant for table / view ?
I want to know when we need to create variant for table/view.
Best regards,
Chris Guhi ,
Whenever you start a program in which selection screens are defined, the system displays a set of input fields for database-specific and program-specific selections. To select a certain set of data, you enter an appropriate range of values.
For further information about selection screens, refer to Selection Screens in the ABAP User's Guide.
If you often run the same program with the same set of selections (for example, to create a monthly statistical report), you can save the values in a selection set called a variant
Procedure
To create a new variant:
1. On the ABAP Editor initial screen, enter the name of the program for which you want to create a variant, select Variants, and choose Change.
2. On the variant maintenance initial screen, enter the name of the variant to be created.
Note the naming convention for variants (see below).
3. Choose Create.
If the program has more than one selection screen, a dialog box for screen assignment appears. The dialog box does not appear if the program only has one selection screen. The selection screen appears in this case.
4. If there is more than one selection screen, select the screens for which you want to create the variant
5. Choose Continue.
The (first) selection screen for the report appears.
If your program has more than one selection screen, use the scroll buttons in the left-hand corner of the application toolbar to navigate between them and to fill the fields with values. If you keep scrolling forwards, the Continue button appears on the last selection screen.
6. Enter the desired selection values, including multiple selection and dynamic selection.
7. Choose Continue. -
HOW TO Create variants for transaction MASS on LFA1 object?
hOW TO Create variants for transaction MASS on LFA1 object?
Edited by: cheppalliakr on Nov 10, 2011 1:09 PM
Moderator message: please do more research before asking, show what you have done yourself and provide more information when asking.
Edited by: Thomas Zloch on Nov 10, 2011 3:10 PMHi Oscar ,
You need to create optional date prompt variable in BW which fills your requirement .
Ex : If you require report should always run for 1st of the month to last of month .Then create Optional date variable in BW with interval .write customer exit ,
if from date is left blank it should take 1st of the month and if todate is left blank it should take last of the month .
when creating webi schedules , leave prompts as blank. -
To create variants for Bex query
Hi Guys,
where and how do we create variants for Bex query.
Thanks,
Your help is appreciated.Hi Sheo,
There are several threads about this, check here:
/thread/297437 [original link is broken]
Hope this helps... -
How to create variant for selection screen which is in subscreen
Hi,
How to create variant for selection screen which is in subscreen in a module pool program?
it is very urgent.
Thanks in advance.Hi,
You can create the 'Parameter Transaction' so that whenever you run the particular transaction it will run with the initial value given when the Tcode was created and hence you can skip the initial screen of the module pool program.
To create Parameter transaction from SE93 you have to choose the last option i.e Parameter Transaction.
Regards
Sudheer -
Reg: How to create Variants for program SAPF120
Hi SAP gurus,
How to create variants for programm SAPF 120.
with regards
JK raoHi,
I suppose you intend to include 22 more Recurring Documents in the F.14 screen in an existing variant. Please check if these 22 are Recurring Docs in FBD3. And make sure that all 48 are appearing in the Document Number (Multiple Selection) tab of F.14. You can test (in a test system) by executing after inclusion and not necessarily saving as variant to make sure that BI session includes all 48 docs.
Rgds. -
How to create Variant for braodcasting in BI 7.0
Hi,
As we create variants in BW 3.x using table TVARVC and
t-code STVARV to enter variable to be updated as per requirement and a code for the same.
And we will get variant in selection screen of report with updated values.
Can some one tell me how can we do the same in BI 7.0?
Please reply soon.
Thanks.
SantoshIn the old SAP BW 3.5 version, we used a program that runs everyday after midnite that sets date variables in TVARVC. The end user could specify which variable from TVARVC to fill the data field in the variant. We have the user save the workbook and then distribute it via the Web Broadcaster.
The workbooks are sent via email if things work OK.
Are you saying we can do something similar using RSRVARIANT? If we insert a row into RSRVARIANT, will the user be able to replace a field in their variant with the value?
Here are some of our variables in TVARVC:
Table: TVARVC
Displayed Fields: 9 of 9 Fixed Columns: 4 List Width
MANDT NAME TYPE NUMB SIGN OPTI LOW
010 Z_PRIOR_FISCAL_PERIOD P 0000 10/2005
010 Z_PRIOR_FISCAL_PERIOD S 0000 I EQ 10/2005
010 Z_PRIOR_WEEKLY_PERIOD P 0000 43/2005
010 Z_PRIOR_WEEKLY_PERIOD S 0000 I EQ 43/2005
This would be for the October 2005 time frame. In November the Z_PRIOR_FISCAL_PERIOD
would get bumped up to 11/2005 which would have been November 2005.
We have a batch procedure that updates the values in TVARVC table. The user
can choose with date value to run with. In the old version everytime the variant
is accessed, the current value of the variable Z_PRIOR_FISCAL_PERIOD would be fetched,
so this is the way we could have monthly and weekly batch jobs run for precalculation
and not get the same date range over and over again.
How can be give the user an option to choose a variable like the above?
Do we need to use Microsoft Excel VBA to call SAP BW to call custom code?
Yes, we can update rsvariant table contents with a program. But how will we "know"
which date range the user wants unless they can choose which variable they want to use?
Has anyone been able to do this?
Thanks,
Chris -
hi , can any one help me creating variant , i have this table table called rszcompdir and list of quries , my instruction was to create a variant on the table to display the given list of quires. thanks in advance
hi ,
Follow the steps to create the variant :
1. Open the table-rszcompdir in se11.
2. Go to table contents (CTRLSHIFTF10)
3. Over there give your selections , and then press the SAVE button .
4. Give the variant name and description and then save .
5. You can create variants as such for different selection criteria's.
6. Press the variant button (adjacent to Number of entries) in the selection screen . It would display your list of variants . Select the variant and you can notice that the selections maintained by you are updated in the fields .
7. Execute the table
Variants are created to save time in giving the same set of selections every-time .
Hope its clear with you how to create variants and use them .
Regards,
Lokesh -
Create variant for VL10b for max delivery date higher than 30 days
Hi expert,
I want to create a variant for the transaction VL10b with a max delivery date higher than 30 days.
The standard transaction make 30 days as default.
How can a proceed?
Thanks for your help.
Regards,
HajaHi Haja,
From the moment you run your variant via transaction VL10B, the delivery creation date
range will get the values saved in your variant. In a second step, when you click
on "Purchase Order" Tab, the system will re-determine the Delivery creation date
range taken into account the fact that field CalcRuleDefltDlvCrDt is empty and that
MaxDelivCreateDate (visible in the variant) is equal to 30.
Please note, the date calculation is being influenced by 2 factors :
-The MaxDelivCreateDate field whose default value can be modified in 2 different ways:
a) either in customizing via transaction VL10CUC
or
b) manually, after unchecking the "Use list profile" check box in the user role of VL10.
By doing this, the field will be made visible and can then be manually modified.
Afterwards, the date calculation is also controlled by the rule defined in CalcRuleDefltDlvCrDt field. You can then possibly also set this field to blank or define your own calculation rule via an
user-exit (include V50R_USEREXIT_PREPARE). If the rule is set to 2, then regardless of the
value stored in MaxDelivCreateDate, the date range will only cover today and tomorrow.
These are the only 2 influencing factors for the program (not the variable type in the variant). Please try any combination you may need and this should suit your needs.
BR,
Enrique -
Create Variant for dynamic population of current date
hi,
How do i create a variant for a DATE to populate the current date in the selection screen?
Please let me know
Thanks in advance.Hi,
Go to SE38..
Press F8..
Press save button..
Give the variant name..and description..
For the corresponding date column Check the check box under the column "L" which says selection variable..
Press the selection variable button in the application toolbar..
Click the hotspot Under the column D..Now it will be green..
Press the drop down ...Choose the current date...
Save the data and save the variant..
Now if you choose that variant...The date will automatically be set to the current date.
THanks
Naren -
Hi,
How can we create a variant in VA05 to make it available in the display variant list?
i have done below settings after that what i have to do??
A) Menu -> 'System -> User profile -> Own data'
B) Change to the 'Parameters' screen
C) Maintain the following entry,
Parameter: SD_VARIANT_MAINTAIN Value: A
D) Save your new settings.
ThanksHello,
I would suggest you to use T-Code VA05N.
Here enter the required selection creteria & then select Goto - Variants - Save as Variant.
Hope this helps,
Thanks,
Jignesh Mehta -
How to create variant for HIER reports
Hello,
I have to run program RKDBAT02(Background Processing for Drilldown Reports) from a FM that i created.
i have to run this program with a variant that i need to update with the values from my FM.
My problem is tha I am trying to use the regular variants FM as RS_VARIANT_VALUES_TECH_DATA to get the variants
fields that i have to load or fm RS_CREATE_VARIANT and in the parameter report name i put the HIER report name.
I keep getting an error that this is not a report. I can put the program hier report name which is a long string,
but the string name change dynamically between clients.
I need a way to load the variant of the hier report .
TNX
Yifatfill in the values in the selection screen and then hit the save as button.
give it a name, enter. the variant is now save.
M. -
How to create variants for a sequence-f​ile?
Hello,
i have a testplan with custom teststeps. Each step has a new field with type "container" and name "myData",
Inside of this container are numeric, string and bool parameter. The parameter inside this container are used to execute
the teststep.
I attached an example of this, if you open the right side of the sequence then the container "myData" can be seen.
No i want to use the testplan for two different products, that means different parameters.
Is the only thing that is included in teststand, the property-loader? If yes, can someone give me an example of how to
use to property loader with my attached sequence?
As far as i understand it, i have to create to different text files where i specify for each step-name the parameters.
Does that mean when my testplan contains >1000 teststaps, that i have to create that manually by hand, or is there a function
to export everything into a file (all parameters, skips, loop, ...)?
I´m using TS 3.5 with LV 8.2
Thanks for your help
Message Edited by OnlyOne on 11-05-2007 07:29 AM
Attachments:
seq1.seq 21 KBHey OnlyOne,
Sounds like the perfect opportunity to tell you about this cool new feature in TS 4.0. You can select multiple steps and change the same property for all selected steps in one swoop. Finally!!! I added five of your custom steps and tested it just to make sure. And it works.
However, if you can't afford to upgrade or you like 3.5 better then the best way is to use the Import/Export Properties Tool. Look in the Tools menu and you'll see it there. Tools>>Import/Export Properties. It's basically the same thing as the Property Loader step except you can go both directions instead of only being able to read values from a file. You can write the file with it!! In fact what most developers do is use the tool to create the file. Copy the file multiple times and change the values in each file. Then use the Property Loader step to dynamically read the different files for their tests.
The Property Loader step is dynamic as the Import/Export Properties tool is only during development.
As for an example for the Property Loader: C:\Program Files\National Instruments\TestStand 3.5\Examples\LoadingLimits That contains a couple examples from Excel, Txt and other file formats.
Hope that helps some,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~
Maybe you are looking for
-
Can two computers use same iTunes library on a network drive?
Can two computers use directly (rather than share) the same iTunes library on a network drive? My media library is on a network drive attached to my Airport Extreme. Right now I share the library with my desktop Mac. I can share fine, but I would li
-
How to display Long text in a single text area field.
Hi All, I have a tabletype field which carries n lines to the form. I want the n lines to be displayed on the form in a floating field. I had the binding ike this "$.table.data[].TDline[]" to the field but its just displaying only 1st line. Is there
-
Finder freezes when trying to move files to external hard drive
Whenever I try to move files from internal hard drive to my external finder freezes it. I have over 5 TBs of free space on my external, so I know it's not a space issue. This happens no matter the size of the file. It starts the copy and then will fr
-
Backup failed with Error: (-50) Creating Directory
Repeats ad nauseum. This is backing up to a second internal drive that is an exact duplicate (in terms of HD model and size). Does anyone know what Error -50 means? Lack of permissions? Invalid name (doesn't seem like it)? 8/30/08 9:06:37 AM /System/
-
Photo Gallery Disappears with ICS
Trying to use the Photo Gallery after my ICS upgrade today. It will appear for a second or two, but if I try to create a slideshow or access Gallery Home, it reverts back to camera. Anyone have an idea how to fix this?