Creating Views in RMDATIND
Hi All,
I have a question on RMDATIND.
Is this program capable of creating specific views only?
If yes, how we have to hint the program to create only those views which are needed?
I have to create Material Masters in 10 plants (it may increate also) with different views to each plant.
If no, do we have any other option?
If we decide to use the BAPI_MATERIAL_SAVEDATA, can we hint the FM to create certain views only?
Regards,
Shylesh
it depends on material type.
it is configured in customizing for material types...
Similar Messages
-
Problem with embeding the same view in dynamically created view container
Hello Experts,
I am getiing a dump when i try to embed the same view inside the dynamically created view container of
dynamically created tabs of a tabstrip
The requirement go like this, i have 2 views in which i have have to embed the 2nd view to view1 where i have an empty
tabstrip without tabs. During runtime i create tabs as well as view containers accordingly and then try to embed view2 in tabs.
I have put the below mentioned code in HANDLEIN,
DATA: lref_vcntlr TYPE REF TO if_wd_view_controller,
lref_comp TYPE REF TO if_wd_component_usage,
lv_embed_pos TYPE string.
lref_vcntlr = wd_this->wd_get_api( ).
lv_embed_pos = 'FILE_PERS_EDIT/VC_GENERAL'.
TRY.
CALL METHOD lref_vcntlr->do_dynamic_navigation
EXPORTING
source_window_name = 'FILE_PERSISTENCE_WND' " Window
source_vusage_name = 'FILE_PERS_EDIT_USAGE_1' " Source View usage
source_plug_name = 'TO_EDIT_LAYOUT' " Outbound plug
target_view_name = 'PERS_EDIT_LAYOUT' " Second view to be embedded
target_plug_name = 'IN' " Second view inboun plug
target_embedding_position = lv_embed_pos
RECEIVING
component_usage = lref_comp.
CATCH cx_wd_runtime_repository .
ENDTRY.
wd_this->fire_to_edit_layout_plg( ).
This works fine for the first time.
However onaction tab select i change the embeding position( 'FILE_PERS_EDIT/view container name of different tab') of the view2 an try to embed view2 in a different tab.
At this point i get a dump stating View2 already present in the window 'FILE_PERSISTENCE_WND' of component.
I think, the view2 embediing has to be removed before i add the view2 in a different tab
Kindly let me know how to remove view2 embedding from tab1 before i add a view2 to a different tab or is there any other
means to handle this problem?
Thanks & Best Regards,
Srini.Hello Srini,
I found a solution to your problem, because I had a similar task.
In WDDOINIT I changed the method do_dynamic_navigation to if_wd_navigation_services_new~prepare_dynamic_navigation:
DATA:
l_view_controller_api TYPE REF TO if_wd_view_controller.
l_view_controller_api = wd_this->wd_get_api( ).
TRY.
CALL METHOD l_view_controller_api->if_wd_navigation_services_new~prepare_dynamic_navigation
EXPORTING
source_window_name = 'WDW_MAIN'
source_vusage_name = 'VW_SUB_USAGE_1'
source_plug_name = 'TO_VW_CONTENT'
target_component_name = 'ZTEST_DYNAMIC'
target_view_name = 'VW_CONTENT'
target_plug_name = 'DEFAULT'
target_embedding_position = 'VW_MAIN/VC_TAB.VW_SUB/TAB1_VC'
RECEIVING
repository_handle = wd_this->g_rep_handle.
CATCH cx_wd_runtime_repository .
ENDTRY.
wd_this->fire_to_vw_content_plg( param1 = 'TAB1' ).
In the action I first deleted the navigation targets, then navigated to the empty-view and last I called my target view:
DATA:
lv_position TYPE string,
l_view_controller_api TYPE REF TO if_wd_view_controller,
lr_view_usage TYPE REF TO if_wd_rr_view_usage,
lr_view_***_t TYPE wdrr_vca_objects,
lr_view_*** LIKE LINE OF lr_view_***_t.
l_view_controller_api = wd_this->wd_get_api( ).
lr_view_usage = wd_this->g_view->get_view_usage( ).
lr_view_usage->delete_all_navigation_targets( plug_name = 'TO_VW_CONTENT' ).
CLEAR lv_position.
CONCATENATE 'VW_MAIN/VC_TAB.VW_SUB/' old_tab '_VC' INTO lv_position.
TRY.
l_view_controller_api->if_wd_navigation_services_new~do_dynamic_navigation(
source_window_name = 'WDW_MAIN'
source_vusage_name = 'VW_SUB_USAGE_1'
source_plug_name = 'TO_EMPTYVIEW'
target_component_name = 'ZTEST_DYNAMIC'
target_view_name = 'EMPTYVIEW'
target_plug_name = 'DEFAULT'
target_embedding_position = lv_position ).
CATCH cx_wd_runtime_repository.
ENDTRY.
CLEAR lv_position.
CONCATENATE 'VW_MAIN/VC_TAB.VW_SUB/' tab '_VC' INTO lv_position.
TRY.
wd_this->g_rep_handle = l_view_controller_api->if_wd_navigation_services_new~prepare_dynamic_navigation(
source_window_name = 'WDW_MAIN'
source_vusage_name = 'VW_SUB_USAGE_1'
source_plug_name = 'TO_VW_CONTENT'
target_component_name = 'ZTEST_DYNAMIC'
target_view_name = 'VW_CONTENT'
target_plug_name = 'DEFAULT'
target_embedding_position = lv_position ).
CATCH cx_wd_runtime_repository.
ENDTRY.
wd_this->fire_to_vw_content_plg( param1 = tab ).
Ann.: I my example, I had 3 views: VW_MAIN which embedds VW_SUB. VW_SUB has the tabs in it and VW_SUB embedds VW_CONTENT.
BR,
Roland -
Create view and alter Session gets 0RA-01031
I can't create a view after using ALTER SESSION set current_schema without using an explicit schema. I get ORA-01031. Is this a known bug? Here are the details:
1. Log on as SYSTEM
2. ALTER SESSION set current_schema=FRED;
3. CREATE VIEW vFoo as select * from Foo; -- ORA-01031: insufficient privileges
4. CREATE VIEW FRED.vFoo as select * from Foo; -- this works!
I've read where some privileges need to be granted directly. In fact, if Fred grants select privilege on Foo to SYSTEM, the statement in #3 above works. However, something doesn't seem right because why does #4 succeed without the GRANT?
In case you're wondering why I don't just use #4 above, which does work, it's because I've got a script that will be run by customers to create tables, views, etc. in an arbitrary schema and the schema is associated with a user with limited permissions. Hence, the use of the ALTER SESSION.See, You looged as SYSTEM (Scheme = SYSTEM)
Now you alter your session to another schema FRED.
Now if you want to access SCHEMA of FRED, You need to connect first.
SQL > connect user/password@host
Then
SQL > CREATE VIEW vFoo as select * from Foo;
View created. -
In generic extration how to create view
HI
In se11 i try to create view using two table vbap and vbak .
vbak mandt vbap mandt
vbak vbeln vbap vbeln for join condion
and also i fill view field tab but the view is no cretated. It give error field name MANDT is not unique. please anyoone clar the error.
By
RajanHi Rajan,
You cannot use one field twice in a View.
If you need the Field "MANDT" from both the tables, change the description as MANDT_VBAK & MANDT_VDAT in View Field column & select it from the respective tables in "Table column".
Hope it helps!
Regards,
Pavan -
How to CREATE VIEW to merge two tables each of which has CLOB-typed column
I failed in creating a view to merge two tables that have CLOB-type column each.
The details are:
Database: Oracle 9i (9.2.0)
Two tables "test" and "test_bak", each of which has the following structure:
ID Number(10, 0)
DUMMY VARCHAR2(20)
DUMMYCLOB CLOB
The following operation fails:
create view dummyview (id, dummy, dummyclob) as
select id, dummy, dummyclob from test
union
select id, dummy, dummyclob from test_bak;
I was announced:
select test.id, test.dummy, test.dummyclob
ERROR in line 2:
ORA-00932: inconsistent data type: required - , but CLOB presented.
But if creating views from only ONE table with CLOB-type columns, or from two tables WITHOUT CLOB-typed columns, the creation will succeed. The following 1) and 2) will succeed, both:
1) one table, with CLOB-typed column
create view dummyview (id, dummy, dummyclob) as
select id, dummy, dummyclob from test;
2) two tables, without CLOB-typed columns
create view dummyview (id, dummy) as
select id, dummy from test
union
select id, dummy from test_bak;
I want to merge the two tables all, with complete columns, how to write the CREATE VIEW SQL statement?
many thanks in advanceDong Wenyu,
No.
But you could do this:
SELECT source.*, nvl (tab1.clob_column, tab2.clob_column)
FROM your_table1 tab1, your_table2 tab2, (
SELECT primary_key, ...
FROM your_table1
UNION
SELECT primary_key, ...
FROM your_table2
) source
WHERE source.primary_key = tab1.id (+)
AND source.primary_key = tab2.id (+)
In other words, do the set operation (UNION (ALL)/INTERSECT/MINUS) on just the PK columns before pulling in the LOB columns.
d. -
Hello,
I am trying to create view which is based on multiple source tables and I am receiving following error
Internal error: An expression services limit has been reached. Please look for potentially complex expressions in your query, and try to simplify them.
Can anyone know how to resolve this.
Thanks,See MS Support for how to solve it:
Error message when you run a query in SQL Server 2005: "Internal error: An expression services limit has been reached"
Olaf Helper
[ Blog] [ Xing] [ MVP] -
Error while creating view in component - BT115H_SLSO
Hi All,
When I am creating view in the BSP Component workbench(T/code: BSP_WD_CMPWB), I
am getting the error "Invalid GUI INPUT DATA :INVALID XMLBLOB DATA" shot and suggest me how to come out of this error.
Component: BT115H_SLSO
Regards,
PraveenHello,
The problem could be a SAPGUI related problem... Whats the current sapgui patch level ? Does it work when you try on another wokstation with the same user ?
Could you please use SAPGUI 720 and update your patch level to 7 ? Then check the behaviour again.
Best regards
Rene -
Non-sense error message trying to create view
Greetings All,
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production on Windows 2008R2
I am getting an error while trying to create a view. The error makes no sense in that no attempt to change a user name or password as the error message being produced suggests.
I can execute the entire select statement fine, I get results back.
If I comment out the line indicated as being in error, the problem moves to the line prior to the one commented out. The 4 lines prior to the line indicated by the error message are similar. The error is occurring on the last of the 5 similar lines of code.
If I move all 5 lines further up in the code the error moves accordingly.
The function validate_number (near where the error is identified) under certain conditions will issue a execute immediate 'alter session set nls_numeric_characters = ''.,''';
The column number identified in the error message is 2 spaces prior to the validate_number function call.
Below is the syntax for the creation of the view, the error message is at the bottom.
The numbers to the far left indicate the line number. I put 2 blank lines before and after the line of code identified by the error message.
The error points to the 2-spaces in front of the VALIDATE_NUMBER function call on line 350. just before the sql code ==> validate_number(Spend_Qty,'')),0) <==
Thanks for your time,
Bob
CREATE OR REPLACE VIEW REPORT_STAGING_V AS
- SELECT
- SPEND_STAGING.INPUT_FILE_ID,
- SPEND_STAGING.SPEND_ID,
- SPEND_STAGING.SPEND_DOC_NUM,
- SPEND_STAGING.SPEND_DOC_ITM_NUM,
- SPEND_STAGING.SPEND_DOC_YR_NUM,
- SPEND_STAGING.ACCT_PYBL_INV_DOC_NUM,
- SPEND_STAGING.ACCT_PYBL_INV_FSCL_YR_NUM,
- SPEND_STAGING.COMPANY_CODE,
- SPEND_STAGING.ACCT_PYBL_INV_LN_ITM_NUM,
- SPEND_STAGING.SPEND_DOC_TYPE_CD,
- SPEND_STAGING.SPEND_MTHD_TXT,
- NVL(SPEND_STAGING.SRC_SYS_CD, '<BLANK>') SRS_SYS_CD,
- SPEND_STAGING.SPEND_SAVING_DT,
- SPEND_STAGING.SPEND_SAVING_FSCL_WK_NUM,
- SPEND_STAGING.SPEND_SAVING_FSCL_MTH_NUM,
- SPEND_STAGING.SPEND_SAVING_FSCL_QTR_NUM,
- SPEND_STAGING.SPEND_SAVING_FSCL_YR_NUM,
- SPEND_STAGING.MTRL_GRP_CD,
- SPEND_STAGING.MTRL_GRP_DESC_TXT,
- SPEND_STAGING.MTRL_GRP_LVL_1_TXT,
- SPEND_STAGING.MTRL_GRP_LVL_2_TXT,
- SPEND_STAGING.MTRL_GRP_LVL_3_TXT,
- SPEND_STAGING.MTRL_GRP_LVL_4_TXT,
- SPEND_STAGING.MTRL_GRP_LVL_5_TXT,
- SPEND_STAGING.MTRL_GRP_LVL_6_TXT,
- SPEND_STAGING.MTRL_GRP_LVL_7_TXT,
- SPEND_STAGING.MTRL_GRP_LVL_8_TXT,
- SPEND_STAGING.GL_ACCT_NUM,
- SPEND_STAGING.GL_ACCT_DESC,
- SPEND_STAGING.COST_CENTR_CD,
- SPEND_STAGING.PRFT_CENTR_CD,
- SPEND_STAGING.FUNCNL_AREA_CD,
- SPEND_STAGING.PURCH_GRP_CD,
- SPEND_STAGING.PURCH_GRP_NAM,
- SPEND_STAGING.PURCH_ORG_CD,
- SPEND_STAGING.PURCH_ORG_NAM,
- SPEND_STAGING.REGION_CODE,
- SPEND_STAGING.VNDR_ACCT_ROOT_NUM,
- SPEND_STAGING.VNDR_CORP_NAM,
- SPEND_STAGING.VNDR_CORP_TICKER_SYMBL_CD,
- SPEND_STAGING.BUYPOINT_VNDR_ACCT_NUM,
- SPEND_STAGING.BUYPOINT_VNDR_FIRST_NAM,
- SPEND_STAGING.PAYPOINT_VNDR_ACCT_NUM,
- SPEND_STAGING.PAYPOINT_VNDR_FIRST_NAM,
- SPEND_STAGING.SPEND_PYMNT_TERM_CD,
- SPEND_STAGING.SPEND_PYMNT_TERM_DESC,
- SPEND_STAGING.SPEND_PYMNT_BSLN_DT,
-50 SPEND_STAGING.SPEND_PYMNT_CLRNG_DT,
- SPEND_STAGING.CONTRACTUAL_PYMNT_TERM_DY_CNT,
- SPEND_STAGING.VNDR_MTRL_NUM,
- SPEND_STAGING.MTRL_ID_1280,
- SPEND_STAGING.MTRL_DESC,
- SPEND_STAGING.BAT_NUM,
- SPEND_STAGING.SPCL_STOCK_IND,
- SPEND_STAGING.INVTY_MVMNT_TYPE_CD,
- SPEND_STAGING.GOODS_RCPNT_NAM,
- SPEND_STAGING.MFG_PART_NUM,
- SPEND_STAGING.PLANT_CD,
- SPEND_STAGING.PLANT_DESC,
- SPEND_STAGING.STORAGE_LOC_CD,
- SPEND_STAGING.STORAGE_LOC_DESC,
- SPEND_STAGING.UNLOADING_PT_DESC,
- SPEND_STAGING.PO_NUM,
- SPEND_STAGING.PO_LN_ITM_NUM,
- SPEND_STAGING.PO_LN_ITM_LAST_CHNG_DT,
- SPEND_STAGING.PO_DOC_DT,
- SPEND_STAGING.PO_TYPE_CD,
- SPEND_STAGING.PO_TYPE_DESC,
- SPEND_STAGING.PO_UOM_CD,
- SPEND_STAGING.PO_PYMNT_TERM_CD,
- SPEND_STAGING.ASGND_ACCT_CTGRY_TYPE_CD,
- SPEND_STAGING.PO_SHORT_TXT,
- SPEND_STAGING.GR_MTRL_DOC_TXT,
- SPEND_STAGING.ACCT_PYBL_INV_ITM_TXT,
- SPEND_STAGING.PO_RCPT_INV_HST_DOC_POST_DT,
- SPEND_STAGING.APPRTN_NUM,
- SPEND_STAGING.REQTN_TRK_NUM,
- SPEND_STAGING.REQTN_LN_NUM,
- SPEND_STAGING.REQTN_LN_ITM_NUM,
- SPEND_STAGING.REQTN_PERSN_ACCT_ID,
- SPEND_STAGING.NTWRK_NUM,
- SPEND_STAGING.NTWRK_CTGRY_CD,
- SPEND_STAGING.PROJ_NAM,
- SPEND_STAGING.WBS_ELMNT_NAM,
- SPEND_STAGING.CPTL_PO_IND,
- LU_GAC_STAGING.TIER_SUPPLIER,
- CASE
- WHEN SPEND_STAGING.PRCRMNT_RPTNG_LVL_3_TXT = 'GAC'
- AND LU_GAC_STAGING.PO_SHORT_TXT = SPEND_STAGING.PO_SHORT_TXT
- AND SPEND_STAGING.SRC_SPLR_NAM IS NULL
- THEN LU_GAC_STAGING.TIER_SUPPLIER
- ELSE SRC_SPLR_NAM
- END SRC_SPLR_NAM,
- SPEND_STAGING.TAX_CD,
- SPEND_STAGING.TAX_CD_DESC,
- SPEND_STAGING.TAX_JURISDICTION_TXT,
- SPEND_STAGING.MTRL_DOC_PRCS_UOM_QTY,
-100 SPEND_STAGING.MTRL_DOC_UNIT_OF_ENTRY_QTY,
- SPEND_STAGING.PO_LN_ITM_QTY,
- SPEND_STAGING.PO_LN_ITM_NET_PRC_UNIT_QTY,
- SPEND_STAGING.PO_LN_ITM_NET_PRC_USD_AMT,
- SPEND_STAGING.PO_LN_ITM_NET_PRC_DC_AMT,
- SPEND_STAGING.PO_LN_ITM_NET_PRC_BDGT_USD_AMT,
- SPEND_STAGING.PO_LN_ITM_TOT_USD_AMT,
- SPEND_STAGING.SPEND_USD_AMT,
- SPEND_STAGING.SPEND_DOC_CURNCY_AMT,
- SPEND_STAGING.SPEND_LOCAL_CURNCY_AMT,
- SPEND_STAGING.SPEND_BDGT_USD_AMT,
- SPEND_STAGING.SPEND_QTY,
- SPEND_STAGING.SPEND_QTY_UOM_CD,
- SPEND_STAGING.SPEND_UNIT_OF_ENTRY_QTY,
- SPEND_STAGING.SPEND_UNIT_OF_ENTRY_UOM_CD,
- SPEND_STAGING.SPEND_DC_FX_MTH_CNVRSN_FCT_VAL,
- SPEND_STAGING.SPEND_DC_FX_BDG_CNVRSN_FCT_VAL,
- SPEND_STAGING.CMPNY_LOCAL_CURNCY_CD,
- SPEND_STAGING.DOC_CURNCY_CD,
- SPEND_STAGING.TRANSTN_TYPE_CD,
- SPEND_STAGING.ACCT_ASGNMT_SEQ_NUM,
- SPEND_STAGING.GLPCA_LN_ITM_REC_NUM,
- SPEND_STAGING.PCA_REF_DOC_NUM,
- SPEND_STAGING.CO_DOC_NUM,
- SPEND_STAGING.CO_FSCL_YR_NUM,
- SPEND_STAGING.CO_LN_ITM_NUM,
- SPEND_STAGING.VNDR_REF_DOC_NUM,
- SPEND_STAGING.SAVING_MTHD_TXT,
- SPEND_STAGING.SAVING_CMNT_TXT,
- SPEND_STAGING.SAVING_COND_NUM,
- SPEND_STAGING.SAVING_COND_ITM_NUM,
- SPEND_STAGING.SAVING_COND_TYPE_CD,
- SPEND_STAGING.SAVING_COND_TYPE_DESC,
- SPEND_STAGING.SAVING_COND_CURNCY_CD,
- SPEND_STAGING.SAVING_COND_PRC_UNIT_UOM_CD,
- SPEND_STAGING.SAVING_COND_PRC_UNIT_QTY,
- SPEND_STAGING.SAVING_COND_RTE_USD_AMT,
- SPEND_STAGING.SAVING_COND_CURNCY_CNVRSN_VAL,
- SPEND_STAGING.SAVING_COND_CURNCY_BDGT_CNVRSN,
- SPEND_STAGING.PO_TRANSTN_COND_DC_AMT,
- SPEND_STAGING.PO_TRANSTN_COND_USD_AMT,
- SPEND_STAGING.SAVING_RTE_PER_USD_AMT,
- SPEND_STAGING.SAVING_PER_USD_AMT,
- SPEND_STAGING.SAVING_PER_BDGT_USD_AMT,
- SPEND_STAGING.AVOIDANCE_USD_AMT,
- SPEND_STAGING.AVOIDANCE_BDGT_USD_AMT,
- SPEND_STAGING.SAVING_USD_AMT,
- SPEND_STAGING.SAVING_BDGT_USD_AMT,
- SPEND_STAGING.NO_FX_SAVING_USD_AMT,
- SPEND_STAGING.NO_FX_AVOIDANCE_USD_AMT,
-150 SPEND_STAGING.TOT_REDUCTN_USD_AMT,
- SPEND_STAGING.TOT_REDUCTN_BDGT_USD_AMT,
- SPEND_STAGING.TOT_NO_FX_REDUCTN_USD_AMT,
- SPEND_STAGING.PAYMENTNET_TRANSTN_NUM,
- SPEND_STAGING.PAYMENTNET_TRANSTN_LN_ITM_NUM,
- SPEND_STAGING.ROW_CRTE_GMT_DTTM,
- SPEND_STAGING.ROW_MODIFY_GMT_DTTM,
- SPEND_STAGING.ROW_CRTE_MST_DTTM,
- SPEND_STAGING.ROW_MODIFY_MST_DTTM,
- SPEND_STAGING.PRCRMNT_DIRECTOR_NAM,
- SPEND_STAGING.PRCRMNT_PLANT_DSGNTN,
- SPEND_STAGING.PRCRMNT_RPTNG_LVL_1_TXT,
- SPEND_STAGING.PRCRMNT_RPTNG_LVL_2_TXT,
- SPEND_STAGING.PRCRMNT_RPTNG_LVL_3_TXT,
- SPEND_STAGING.SPEND_CAT_ID,
- SPEND_STAGING.SPEND_RULE_ID,
- SPEND_STAGING.TRANSACTION_DATE,
- SPEND_STAGING.SPEND_AMOUNT,
- SPEND_STAGING.ITEM_DESCRIPTION,
- SPEND_STAGING.SUPPLIER_ID,
- CASE
- WHEN SPEND_STAGING.SOURCE ='SPEND'
- THEN 'Spend and Savings'
- WHEN SPEND_STAGING.SOURCE ='TRAVEL'
- THEN 'Travel'
- ELSE NULL
- END SOURCE,
- SPEND_STAGING.SUPPLIER_NUMBER,
- SPEND_STAGING.TRAVEL_PERSNO,
- SPEND_STAGING.TRIP,
- SPEND_STAGING.TRAVEL_DOC,
- SPEND_STAGING.TRAVEL_EXPTY,
- SPEND_STAGING.TRAVEL_EXP_TYPE_DESC,
- SPEND_STAGING.TRAVLE_CREDIT_CARD_TRAN_DESC TRAVEL_CREDIT_CARD_TRAN_DESC,
- SPEND_STAGING.COUNTRY_CODE,
- SPEND_STAGING.TRAVEL_INFO,
- SPEND_STAGING.TRAVEL_ID,
- SPEND_STAGING.TRAVEL_DOCUMENT_NUMBER,
- SPEND_STAGING.TRAVEL_LAST_NAME_FIRST_NAME,
- SPEND_STAGING.TRAVEL_TRIP_REASON,
- SPEND_STAGING.TRAVEL_TRIP_STATUS,
- SPEND_STAGING.TRAVEL_RATE,
- SPEND_STAGING.FINANCE_ORG,
- SPEND_STAGING.ASSOCIATED_MG_CODE,
- SPEND_STAGING.COUNTRY_DESC,
- SPEND_STAGING.TRAVEL_ID_DESC_BANKCARD,
- SPEND_STAGING.COMPANY_CODE_DESC,
- SPEND_STAGING.COST_CENTER_DESC,
- 'Q'||TO_CHAR(SPEND_STAGING.TRANSACTION_DATE,'Q') QUARTERNAME,
- TO_CHAR(SPEND_STAGING.TRANSACTION_DATE,'YYYY') YEARNAME,
-200 CASE
- WHEN SPEND_STAGING.SRC_SYS_CD = 'P-CARD'
- THEN SS2.CLEANSED_PARENT_NAME
- ELSE SS1.CLEANSED_PARENT_NAME
- END CLEANSED_PARENT_NAME,
- CASE
- WHEN SPEND_STAGING.SRC_SYS_CD = 'P-CARD'
- THEN SS2.cleansed_name_1
- ELSE SS1.cleansed_name_1
- END CLEANSED_NAME1,
- CASE
- WHEN SPEND_STAGING.MTRL_ID_1280 IS NULL
- AND SPEND_STAGING.VNDR_MTRL_NUM IS NOT NULL
- THEN SPEND_STAGING.VNDR_MTRL_NUM
- WHEN SPEND_STAGING.MTRL_ID_1280 IS NULL
- AND SPEND_STAGING.VNDR_MTRL_NUM IS NULL
- AND SPEND_STAGING.MFG_PART_NUM IS NOT NULL
- THEN SPEND_STAGING.MFG_PART_NUM
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZAR'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280||'-MIX'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZAR'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-MIX'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZSA'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ASMBLY'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZSA'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ASMBLY'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZST'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-TEST'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZST'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-TEST'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZBI'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
-250 THEN SPEND_STAGING.MTRL_ID_1280
- ||'-BURN-IN'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZBI'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-BURN-IN'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZRJ'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-REJECT'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZRJ'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-REJECT'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZPR'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-PROBE'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZPR'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-PROBE'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZEF'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ENG'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZEF'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ENG'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZEM'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ENG'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZEM'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ENG'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZEU'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
-300 THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ENGWFR'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZEU'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ENGWFR'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZSF'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-WFR'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZSF'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-WFR'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZEF'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ENG'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZEF'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ENG'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-POTypeCode'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-POTypeCode'
- ELSE SPEND_STAGING.MTRL_ID_1280
- END ReportingPartNum,
- LU_PCARD_STAGING.COST_CENTR_CD PCARD_COST_CENTR_CD,
- LU_PCARD_STAGING.CTY_NAM PCARD_CTY_NAM,
- LU_PCARD_STAGING.DISABLE_LINE PCARD_DISABLE_LINE,
- LU_PCARD_STAGING.DISABLED_OWNED_BIZ_FLG PCARD_DISABLED_OWNED_BIZ_FLG,
- LU_PCARD_STAGING.DIVERSITY_VNDR_FLG PCARD_DIVERSITY_VNDR_FLG,
- LU_PCARD_STAGING.FIELD PCARD_FIELD,
- LU_PCARD_STAGING.GL_ACCT_NUM PCARD_GL_ACCT_NUM,
- LU_PCARD_STAGING.HUB_ZONE_SMALL_BIZ_CONCERN_FLG PCARD_HUB_ZONE,
- LU_PCARD_STAGING.MINORITY_OWNED_BIZ_FLG PCARD_MINORITY_OWNED_BIZ_FLG,
- NVL(validate_number(Po_Ln_Itm_Net_Prc_Usd_Amt,'')/DECODE(validate_number(Po_Ln_Itm_Net_Prc_Unit_Qty,''),0,1,validate_number(Po_Ln_Itm_Net_Prc_Unit_Qty,'')),0) po_unit_price_per_1_usd,
- NVL(validate_number(Po_Ln_Itm_Net_Prc_Dc_Amt,'') /DECODE(validate_number(Po_Ln_Itm_Net_Prc_Unit_Qty,''),0,1,validate_number(Po_Ln_Itm_Net_Prc_Unit_Qty,'')),0) po_unit_price_per_1_doc_cur,
- NVL(validate_number(Spend_Bdgt_Usd_Amt,'') /DECODE(validate_number(Spend_Qty,''),0,1, validate_number(Spend_Qty,'')),0) spend_up_per_1_usd_budgt_rate,
- NVL(validate_number(Spend_Usd_Amt,'') /DECODE(validate_number(Spend_Qty,''),0,1, validate_number(Spend_Qty,'')),0) spend_up_per_1_usd_mon_rate,
-350 NVL(validate_number(Spend_Doc_Curncy_Amt,'') /DECODE(validate_number(Spend_Qty,''),0,1, validate_number(Spend_Qty,'')),0) Spend_UP_per_1_Doc_Curr,
- TO_CHAR(TRANSACTION_DATE,'MM-YYYY') MONTH_YEAR,
- LU_PCARD_STAGING.MTRL_GRP_CD PCARD_MTRL_GRP_CD,
- LU_PCARD_STAGING.PAYMENTNET_TRANSTN_LN_ITM_NUM PCARD_PAY_TRANSTN_LN_ITM_NUM,
- LU_PCARD_STAGING.PAYMENTNET_TRANSTN_NUM PCARD_PAY_TRANSTN_NUM,
- LU_PCARD_STAGING.PAYMENTNET_TRANSTN_POST_DT PCARD_PAY_TRANSTN_POST_DT,
- LU_PCARD_STAGING.PCARD_INV_AMT PCARD_INV_AMT,
- LU_PCARD_STAGING.PCARD_INV_CURNCY_CD PCARD_INV_CURNCY_CD,
- LU_PCARD_STAGING.PCARD_INV_DT PCARD_INV_DT,
- LU_PCARD_STAGING.PCARD_INV_LN_ITM_AMT PCARD_INV_LN_ITM_AMT,
- LU_PCARD_STAGING.PCARD_INV_LN_ITM_TAX_AMT PCARD_INV_LN_ITM_TAX_AMT,
- LU_PCARD_STAGING.PCARD_INV_LN_ITM_TAX_CD PCARD_INV_LN_ITM_TAX_CD,
- LU_PCARD_STAGING.PCARD_INV_REF_NUM PCARD_INV_REF_NUM,
- LU_PCARD_STAGING.PCARD_INV_TAX_AMT PCARD_INV_TAX_AMT,
- LU_PCARD_STAGING.PCARD_MERCHANT_NAM PCARD_MERCHANT_NAM,
- LU_PCARD_STAGING.PCARD_OWNR_ID PCARD_OWNR_ID,
- LU_PCARD_STAGING.PCARD_SHORT_TXT PCARD_SHORT_TXT,
- LU_PCARD_STAGING.PCARD_SRC_FILE_NAM PCARD_SRC_FILE_NAM,
- LU_PCARD_STAGING.PLANT_CD PCARD_PLANT_CD,
- LU_PCARD_STAGING.PURCH_GRP_CD PCARD_PURCH_GRP_CD,
- LU_PCARD_STAGING.RCPNT_ID PCARD_RCPNT_ID,
- LU_PCARD_STAGING.REQTN_CRTE_BY_ID PCARD_REQTN_CRTE_BY_ID,
- LU_PCARD_STAGING.REQTN_LN_ITM_NUM PCARD_REQTN_LN_ITM_NUM,
- LU_PCARD_STAGING.REQTN_NUM PCARD_REQTN_NUM,
- LU_PCARD_STAGING.SERV_DISABLE_VETERAN_BIZ_FLG PCARD_SERV_DIS_VET_BIZ_FLG,
- LU_PCARD_STAGING.STATE_CD PCARD_STATE_CD,
- LU_PCARD_STAGING.STATE_CD,
- LU_PCARD_STAGING.VETERAN_OWNED_BIZ_FLG PCARD_VETERAN_OWNED_BIZ_FLG,
- LU_PCARD_STAGING.VNDR_ACCT_NUM PCARD_VNDR_ACCT_NUM,
- LU_PCARD_STAGING.WOMAN_OWNED_BIZ_FLG PCARD_WOMAN_OWNED_BIZ_FLG2,
- DENSE_RANK() OVER (ORDER BY NVL(TO_CHAR(TRANSACTION_DATE, 'YYYYMM'),'190010') DESC) AS DATE_RANK,
- LU_PRICE_BY_UNIT_STAGING.MTRL_GRP PBU_MTRL_GRP,
- LU_PRICE_BY_UNIT_STAGING.MTRL_GRP_DES PBU_MTRL_GRP_DES,
- LU_PRICE_BY_UNIT_STAGING.MTRL_ID PBU_MTRL_ID,
- LU_PRICE_BY_UNIT_STAGING.PLANT PBU_PLANT,
- LU_PRICE_BY_UNIT_STAGING.PLANT_DESC PBU_PLANT_DESC,
- LU_PRICE_BY_UNIT_STAGING.SUPPLIER PBU_SUPPLIER,
- LU_PRICE_BY_UNIT_STAGING.DESCRIPTION PBU_DESCRIPTION,
- LU_PRICE_BY_UNIT_STAGING.UOM PBU_UOM,
- LU_PRICE_BY_UNIT_STAGING.CONTENT_VOLUME PBU_CONTENT_VOLUME,
- LU_PRICE_BY_UNIT_STAGING.UOM_CONTENT_VOLUME PBU_UOM_CONTENT_VOLUME,
- LU_PRICE_BY_UNIT_STAGING.CONTENT_WEIGHT PBU_CONTENT_WEIGHT,
- LU_PRICE_BY_UNIT_STAGING.UOM_CONTENT_WT PBU_UOM_CONTENT_WT,
- LU_PRICE_BY_UNIT_STAGING.PRICE__PACKAGE PBU_PRICE__PACKAGE,
- LU_PRICE_BY_UNIT_STAGING.PRICE_PER_UOM_WT PBU_PRICE_PER_UOM_WT,
- LU_PRICE_BY_UNIT_STAGING.PRICE_PER_UOM_VOL PBU_PRICE_PER_UOM_VOL,
- LU_PRICE_BY_UNIT_STAGING.COMMON_NAME PBU_COMMON_NAME,
- LU_GAC_UOM_REFERENCE_STAGING.LU_GAC_UOM_REFERENCE_ID,
- LU_GAC_UOM_REFERENCE_STAGING.FSL_PART_NUMBER,
- LU_GAC_UOM_REFERENCE_STAGING.SUPPLIER LU_GAC_SUPPLIER,
-400 LU_GAC_UOM_REFERENCE_STAGING.DESCRIPTION LU_GAC_DESCRIPTION,
- LU_GAC_UOM_REFERENCE_STAGING.GAC_MAT_SUBGROUP LU_GAC_MAT_SUBGROUP ,
- LU_GAC_UOM_REFERENCE_STAGING.ACTUAL_FILL LU_GAC_ACTUAL_FILL,
- LU_GAC_UOM_REFERENCE_STAGING.COMMON__UOM LU_GAC_COMMON_UOM,
- LU_GAC_UOM_REFERENCE_STAGING.PACKAGE LU_GAC_PACKAGE
- FROM
- SPEND_STAGING,
- SUPPLIER_STAGING SS1,
- SUPPLIER_STAGING SS2,
- LU_GAC_STAGING,
- lu_card_code_staging,
- LU_PCARD_STAGING,
- LU_PRICE_BY_UNIT_STAGING,
- LU_GAC_UOM_REFERENCE_STAGING
- WHERE SS1.SUPPLIER_ID(+) = SPEND_STAGING.SUPPLIER_ID
- AND SS2.PCARD_INV_REF_NUM(+) = SPEND_STAGING.PCARD_INV_REF_NUM
- AND SS2.PAYMENTNET_TRANSTN_NUM(+) = SPEND_STAGING.PAYMENTNET_TRANSTN_NUM
- AND SS2.PAYMENTNET_TRANSTN_LN_ITM_NUM(+) =
- SPEND_STAGING.PAYMENTNET_TRANSTN_LN_ITM_NUM
- AND lu_card_code_staging.card_code(+) = spend_staging.travel_id
- AND lu_gac_staging.po_short_txt(+) = spend_staging.po_short_txt
- AND LU_PCARD_STAGING.PCARD_INV_REF_NUM(+) = SPEND_STAGING.PCARD_INV_REF_NUM
- AND LU_PCARD_STAGING.PAYMENTNET_TRANSTN_NUM(+) =
- SPEND_STAGING.PAYMENTNET_TRANSTN_NUM
- AND LU_PCARD_STAGING.PAYMENTNET_TRANSTN_LN_ITM_NUM(+) =
- SPEND_STAGING.PAYMENTNET_TRANSTN_LN_ITM_NUM
- AND LU_PRICE_BY_UNIT_STAGING.MTRL_ID(+) = SPEND_STAGING.MTRL_ID_1280
- AND LU_PRICE_BY_UNIT_STAGING.PLANT(+) = SPEND_STAGING.PLANT_CD
- AND lu_gac_uom_REFERENCE_STAGING.fsl_part_number(+) =
-431 SPEND_STAGING.MTRL_ID_1280;Error at Command Line:350 Column:112
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause: An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action: Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Edited by: Snyds on May 24, 2012 7:46 AMChecking for privileges was the first thing I did.
User has create view and create any view.
Also has alter session privilege which is needed within the validate_number function (see below).
I was able to create the view you suggested.
I believe there is a privilege problem, just cant figure which.
create or replace function validate_number(p_number in varchar2,
p_format_mask in varchar2)
return number
AUTHID CURRENT_USER is
v_number number;
v_mask varchar2(100) := '999999999999999999999.00000000000000000000';
cursor get_number_masks is
select mask,upper(is_i18n) is_i18n from cm_master.format_mask
where type = 'NUMBER' order by sequence, is_i18n;
begin
if p_format_mask is not null then
begin
return to_number(p_number, p_format_mask);
exception
when others then null;
end;
end if;
for a in get_number_masks
loop
if a.is_i18n = 'Y' then
-- We are applying an international number format mask
begin
-- Attempt #1
-- Set the decimal to a ',' and the group separator to a '.'
execute immediate 'alter session set nls_numeric_characters = '',.''';
v_number := to_number(ltrim(rtrim(to_char(to_number(p_number, a.mask),v_mask))),v_mask);
execute immediate 'alter session set nls_numeric_characters = ''.,''';
return v_number;
exception
when others then
-- First Attempt Failed - Attempt #2
-- Set the decimal to a ',' and the group separator to a ' '
begin
execute immediate 'alter session set nls_numeric_characters = '', ''';
v_number := to_number(ltrim(rtrim(to_char(to_number(p_number, a.mask),v_mask))),v_mask);
execute immediate 'alter session set nls_numeric_characters = ''.,''';
return v_number;
exception
when others then
-- Second Attempt Failed - Attempt #3
-- Set the decimal to a '.' and the group separator to a ' '
begin
execute immediate 'alter session set nls_numeric_characters = ''. ''';
v_number := to_number(ltrim(rtrim(to_char(to_number(p_number, a.mask),v_mask))),v_mask);
execute immediate 'alter session set nls_numeric_characters = ''.,''';
return v_number;
exception
when others then null;
end;
end;
end;
else
begin
return to_number(p_number, a.mask);
exception
when others then null;
end;
end if;
end loop;
return null;
exception
when others then return null;
end validate_number;Edited by: Snyds on May 24, 2012 7:48 AM -
What is the use for CREATING VIEW WITH CHECK OPTION?
Dear Legends,
I have a doubt
What is the use for creating view?
A: First Data Integrity, Selecting Particular Columns..
What is the use for creating a view with check option?
A: As per oracle manual I read that its a referential integrity check through views.
A: Enforcing constraints at DB level.
A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??
A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???
Please clear my doubt's Legends
Lots of Thanks....
Regards,
KarthikHi, Karthick,
karthiksingh_dba wrote:
... What is the use for creating view?
A: First Data Integrity, Selecting Particular Columns..Most views are created and used for convenience. A view is a saved query. If the same operations are often done, then it can be very convenient to code those operations once, in a view, and refer to the view rather than explicitly doing those operations.
Sometimes, views are created and used for security reasons. For example, you many want to allow some users to see only certain rows or certain columns of a table.
Views are necessary for INSTEAD OF triggers.
What is the use for creating a view with check option?
A: As per oracle manual I read that its a referential integrity check through views.The reason is integrity, not necessarily referential integrity. The CHECK option applies only when DML is done through the view. It prohibits certain changes. For example, if a user can't see certain rows through a view, the CHECK option keeps the user from creating such rows.
A: Enforcing constraints at DB level.I'm not sure what you mean. Please give an example.
A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??No. Using CHECK OPTION, you can do some inserts and updates, but not others. The columns involved may or may not have constraints in either case.
A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???If you try to violate a constraint, you'll get an error. That happens in views with or without the CHECK OPTION, and also in tables. -
Creating View for a table with parent child relation in table
I need help creating a view. It is on a base table which is a metadata table.It is usinf parent child relationship. There are four types of objects, Job, Workflow, Dataflow and ABAP dataflow. Job would be the root parent everytime. I have saved all the jobs
of the project in another table TABLE_JOB with column name JOB_NAME. Query should iteratively start from the job and search all the child nodes and then display all child with the job name. Attached are the images of base table data and expected view data
and also the excel sheet with data.Picture 1 is the sample data in base table. Picture 2 is data in the view.
Base Table
PARENT_OBJ
PAREBT_OBJ_TYPE
DESCEN_OBJ
DESCEN_OBJ_TYPE
JOB_A
JOB
WF_1
WORKFLOW
JOB_A
JOB
DF_1
DATAFLOW
WF_1
WORKFLOW
DF_2
DATAFLOW
DF_1
DATAFLOW
ADF_1
ADF
JOB_B
JOB
WF_2
WORKFLOW
JOB_B
JOB
WF_3
WORKFLOW
WF_2
WORKFLOW
DF_3
DATAFLOW
WF_3
WORKFLOW
DF_4
DATAFLOW
DF_4
DATAFLOW
ADF_2
ADF
View
Job_Name
Flow_Name
Flow_Type
Job_A
WF_1
WORKFLOW
Job_A
DF_1
DATAFLOW
Job_A
DF_2
DATAFLOW
Job_A
ADF_1
ADF
Job_B
WF_2
WORKFLOW
Job_B
WF_3
WORKFLOW
Job_B
DF_3
DATAFLOW
Job_B
DF_4
DATAFLOW
Job_B
ADF_2
ADF
I implemented the same in oracle using CONNECT_BY_ROOT and START WITH.
Regards,
MeghaI think what you need is recursive CTE
Consider your table below
create table basetable
(PARENT_OBJ varchar(10),
PAREBT_OBJ_TYPE varchar(10),
DESCEN_OBJ varchar(10),DESCEN_OBJ_TYPE varchar(10))
INSERT basetable(PARENT_OBJ,PAREBT_OBJ_TYPE,DESCEN_OBJ,DESCEN_OBJ_TYPE)
VALUES('JOB_A','JOB','WF_1','WORKFLOW'),
('JOB_A','JOB','DF_1','DATAFLOW'),
('WF_1','WORKFLOW','DF_2','DATAFLOW'),
('DF_1','DATAFLOW','ADF_1','ADF'),
('JOB_B','JOB','WF_2','WORKFLOW'),
('JOB_B','JOB','WF_3','WORKFLOW'),
('WF_2','WORKFLOW','DF_3','DATAFLOW'),
('WF_3','WORKFLOW','DF_4','DATAFLOW'),
('DF_4','DATAFLOW','ADF_2','ADF')
ie first create a UDF like below to get hierarchy recursively
CREATE FUNCTION GetHierarchy
@Object varchar(10)
RETURNS @RESULTS table
PARENT_OBJ varchar(10),
DESCEN_OBJ varchar(10),
DESCEN_OBJ_TYPE varchar(10)
AS
BEGIN
;With CTE
AS
SELECT PARENT_OBJ,DESCEN_OBJ,DESCEN_OBJ_TYPE
FROM basetable
WHERE PARENT_OBJ = @Object
UNION ALL
SELECT b.PARENT_OBJ,b.DESCEN_OBJ,b.DESCEN_OBJ_TYPE
FROM CTE c
JOIN basetable b
ON b.PARENT_OBJ = c.DESCEN_OBJ
INSERT @RESULTS
SELECT @Object,DESCEN_OBJ,DESCEN_OBJ_TYPE
FROM CTE
OPTION (MAXRECURSION 0)
RETURN
END
Then you can invoke it as below
SELECT * FROM dbo.GetHierarchy('JOB_A')
Now you need to use this for every parent obj (start obj) in view
for that create view as below
CREATE VIEW vw_Table
AS
SELECT f.*
FROM (SELECT DISTINCT PARENT_OBJ FROM basetable r
WHERE NOT EXISTS (SELECT 1
FROM basetable WHERE DESCEN_OBJ = r.PARENT_OBJ)
)b
CROSS APPLY dbo.GetHierarchy(b.PARENT_OBJ) f
GO
This will make sure it will give full hieraracy for each start object
Now just call view as below and see the output
SELECT * FROM vw_table
Output
PARENT_OBJ DESCEN_OBJ DESCEN_OBJ_TYPE
JOB_A WF_1 WORKFLOW
JOB_A DF_1 DATAFLOW
JOB_A ADF_1 ADF
JOB_A DF_2 DATAFLOW
JOB_B WF_2 WORKFLOW
JOB_B WF_3 WORKFLOW
JOB_B DF_4 DATAFLOW
JOB_B ADF_2 ADF
JOB_B DF_3 DATAFLOW
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Create view link programatically
Hi all,
I am working on this weird requirement.
Basically, I have to create a detail table on a search resullt table. The search result is seeded search, for Item Advance search in Oracle PIM module which is not based upon a VO. The search result table is dynamically built at run time in the EgoItemSearchHelper class and that's where they build the search result VO (EgoItemSearchResultsVO).
Now, I need to access this VO in the controller class, and create a view link programatically between details table VO and this VO. The problem is since I do not have Impl class for the EgoItemSearchResultsVO, how do I accees the column that is the key attribute. Second I do not know how to create view link between the two VOs programatically.
Please help it's urgent.
ThanksPratap, My problem is the seeded VO is in seeded AM and my details VO will be in my custom AM, I don't know if we can have a view link between View objects that are in different AMs.
To bypass that problem, I tried to create a VO in the seeded AM programatically and then created a view link. Now since the AM is seeded, and I am adding my details VO to this AM programatically, I thought of creating a table also programatically on the detais VO.
In the end it does not work, I end up getting a show button on the main table, but when I click I get an error (Cannot find <null> attribute in the EOGITEMSEARCHRESULTVO) which is the seeded VO class. Unfortunately there is no boolean variable on the dynamic seeded VO, so don't know what to put in oatablebean.setDetailViewAttributeName("") method;
Any clues on this, appreciate all responses from the forum gurus.
ViewObject voEmp = oaapplicationmodule.createViewObject("MyEmp", "xxuss.oracle.apps.ego.item.eu.server.DetailsOrderLinesVO");
ViewObject voEmp = am.createViewObject("MyEmp", "xxuss.oracle.apps.ego.item.eu.server.DetailsOrderLinesVO");
AttributeDef[] prjLinkAttrs = new AttributeDef[]{oaapplicationmodule.findViewObject("EgoItemSearchResultsVO").findAttributeDef("INVENTORY_ITEM_ID_B")};
System.out.println("definition for attr = "+ prjLinkAttrs[0]);
AttributeDef[] taskLinkAttrs = new AttributeDef[]{voEmp.findAttributeDef("InvId") };
ViewLink vl = am.createViewLinkBetweenViewObjects("MyLink3",
"DetailInv", // accessor name--more on this below
am.findViewObject("EgoItemSearchResultsVO"), // master
prjLinkAttrs, // department attributes
voEmp, // detail
taskLinkAttrs, // employee attributes
null); // assoc clause
System.out.println("view link =" + vl.getName());
OATableBean tb = (OATableBean)createWebBean(oapagecontext,TABLE_BEAN,null,"table");
tb.setViewUsageName("MyEmp");
OAMessageStyledTextBean beans = (OAMessageStyledTextBean)createWebBean(oapagecontext,MESSAGE_STYLED_TEXT_BEAN,OAWebBeanConstants.VARCHAR2_DATATYPE,"number");
beans.setPrompt("column1");
beans.setViewUsageName("MyEmp");
beans.setViewAttributeName("InvId");
tb.addIndexedChild(beans);
oatablebean.setDetail((OAWebBean)tb);
oatablebean.setDetailViewAttributeName("SelectFlag"); // I just tried this, SelectFlag is not a boolean attribute though, is there a way to create a boolean attribute programatically for seeded VO EGOITEMSEARCHRESULTVO and set it here, will it help
oatablebean.setAllDetailsEnabled(true); -
Hi,
I've a question about best practice to develop a large application with many complex views.
Typically at each time only one views is displayed. User can go from a view to another using a menu bar.
Every view is build with fxml, so my question is about how to create views and how switch from one to another.
Actually I load fxml every time the view is required:
FXMLLoader loader = new FXMLLoader();
InputStream in = MyController.class.getResourceAsStream("MyView.fxml");
loader.setBuilderFactory(new JavaFXBuilderFactory());
loader.setLocation(OptixController.class.getResource("MyView.fxml"));
BorderPane page;
try {
page = (BorderPane) loader.load(in);
} finally {
if (in != null) {
in.close();
// appController = loader.getController();
Scene scene = new Scene(page, MINIMUM_WINDOW_WIDTH, MINIMUM_WINDOW_HEIGHT);
scene.getStylesheets().add("it/myapp/Mycss.css");
stage.setScene(scene);
stage.sizeToScene();
stage.setScene(scene);
stage.sizeToScene();
stage.centerOnScreen();
stage.show();My questions:
1- is a good practice reload every time the fxml to design the view?
2- is a good practice create every time a new Scene or to have an unique scene in the app and every time clear all elements in it and set the new view?
3- the views should be keep in memory to avoid performace issue or it is a mistake? I think that every time a view should be destroy in order to free memory.
Thanks very much
Edited by: drenda81 on 21-mar-2013 10.41>
>
My questions:
1- is a good practice reload every time the fxml to design the view?
2- is a good practice create every time a new Scene or to have an unique scene in the app and every time clear all elements in it and set the new view?
3- the views should be keep in memory to avoid performace issue or it is a mistake? I think that every time a view should be destroy in order to free memory.
In choosing between 1 and 3 above, I think either is fine. Loading the FXML on demand every time will be slightly slower, but assuming you are not doing something unusual such as loading over a network connection it won't be noticeable to the user. Loading all views at startup and keeping them in memory uses more memory, but again, it's unlikely to be an issue. I would choose whichever is easier to code (probably loading on demand).
In choosing between reusing a Scene or creating a new one each time, I would reuse the Scene. "Clearing all elements in it" only needs you to call scene.setRoot(...) and pass in the new view. Since the Scene has a mutable root property, you may as well make use of it and save the (small) overhead of instantiating a new Scene each time. You might consider exposing a currentView property somewhere (say, in your main controller, or model if you have a separate model class) and binding the Scene's root property to it. Something like:
public class MainController {
private final ObjectProperty<Parent> currentView ;
public MainController() {
currentView = new SimpleObjectProperty<Parent>(this, "currentView");
public void initialize() {
currentView.set(loadView("StartView.fxml"));
public ObjectProperty<Parent> currentViewProperty() {
return currentView ;
// event handler to load View1:
@FXML
private void loadView1() {
currentView.set(loadView("View1.fxml"));
// similarly for other views...
private Parent loadView(String fxmlFile) {
try {
Parent view = FXMLLoader.load(getClass().getResource(fxmlFile));
return view ;
} catch (...) { ... }
}Then your application can do this:
@Override
public void start(Stage primaryStage) {
Scene scene = new Scene();
FXMLLoader loader = new FXMLLoader(getClass().getResource("Main.fxml"));
MainController controller = (MainController) loader.getController();
scene.rootProperty().bind(controller.currentViewProperty());
// set scene in stage, etc...
}This means your Controller doesn't need to know about the Scene, which maintains a nice decoupling. -
A dynamic table based on run-time created view object -- please help!
Hello!
I'm trying to create a dynamic table based on an run-time created view object. All go ok, but table binding component take the first view/iterator state and don't reflect changes they have. Please, take a look:
1. At run-time the view is being replaced by new red-only one based on query in application module:
getQueryView().remove();
createViewObjectFromQueryStmt("QueryView", statement);
2. Page definition file contains an iterator (using iterator or methodIterator - doesn't matter) binding and table, which binds to the iterator, like:
<methodIterator id="distributeQuery1Iter" Binds="distributeQuery1.result"
DataControl="QueryServiceDataControl" RangeSize="10"/>
<table id="distributeQuery11" IterBinding="distributeQuery1Iter"/>
3. The page code uses <af:table>. But, if I use table binding (it's right) like this:
<af:table var="row" value="#{bindings.distributeQuery11.collectionModel}">
<af:forEach items="#{bindings.distributeQuery11.attributeDefs}" var="def">
the table will never changed (i.e. still show the first view instance).
When I tried to use iterator binding directly (it's bad and cannot provide all needed features unlike CollectionModel from table binding) I saw that table works!
(Code is somehing like:
<af:table var="row" value="#{bindings.myIterator.allRowsInRange}">
<af:forEach items="#{bindings.myIterator.attributeDefs}" var="def">
Why the table binding do not reflect changes in iterator? Or should I use different approach?
Thanks in advance!
Ilya.I got it to work! I used a hybrid approach comprised of some of your code and some of Steve Muench's AcceessAppModuleInBackingBean example.
In the setBindings method, I execute an app module method that redefines the query, then I used your code to delete and recreate bindings and iterator:
public void setBindingContainer(DCBindingContainer bc) {
this.bindingContainer = bc;
rebuildVO();
The rebuildVO() method looks like the code you provided in your example:
private void rebuildVO() {
DCDataControl dc;
DispatchAppModule dApp;
DCBindingContainer bc;
DCIteratorBinding it;
OperationBinding operationBinding;
ViewObject vo;
DCControlBinding cb;
try {
bc = getBindingContainer();
dc = bc.findDataControl(DATACONTROL);
dApp = (DispatchAppModule)dc.getDataProvider();
// Execute App Module Method to rebuild VO based upon new SQL Statement.
dApp.setDispatchViewSQL();
vo = dApp.findViewObject(DYNAMIC_VIEW_NAME);
it = bc.findIteratorBinding(DYNAMIC_VO_ITER_NAME);
it.bindRowSetIterator(vo, true);
// logger.info("Remove value binding...");
cb = bc.findCtrlBinding(DYNAMIC_VIEW_NAME);
cb.getDCIteratorBinding().removeValueBinding(cb);
bc.removeControlBinding(cb);
// logger.info("Creating new value binding...");
FacesCtrlRangeBinding dynamicRangeBinding =
new FacesCtrlRangeBinding(null,
bc.findIteratorBinding(DYNAMIC_VO_ITER_NAME), null);
// logger.info("Add control binding...");
bc.addControlBinding(DYNAMIC_VIEW_NAME, dynamicRangeBinding);
} catch (Exception e) {
e.printStackTrace();
And my App Module method that redefines the view object looks like this:
public void setDispatchViewSQL() {
String SQL =
"begin ? := PK_BUsiNESS.F_GETDISPATCHVIEWSQL();end;";
CallableStatement st = null;
String ViewSQL = null;
try {
st = getDBTransaction().createCallableStatement(SQL,
DBTransaction.DEFAULT);
* Register the first bind parameter as our return value of type LONGVARCHAR
st.registerOutParameter(1, OracleTypes.LONGVARCHAR);
st.execute();
ViewSQL = ((OracleCallableStatement) st).getString(1);
findViewObject(DYNAMIC_VO_NAME).remove();
ViewObject vo = createViewObjectFromQueryStmt(DYNAMIC_VO_NAME, ViewSQL);
vo.executeQuery();
} catch (SQLException s) {
throw new JboException(s);
} finally {
try {
st.close();
} catch (SQLException s) {
s.printStackTrace();
When I run it I get my desired results. One thing I don't quite understand is why when the page is first rendered it shows the last set of records rather than the first. Now I have to figure out how to put navigation URLS in each of the table cells.
Thanks for your help; I would not have gotten this far without it,
Jeff -
How to generate auto incremented ID using a user who has create,view permissions only
Hi
i am using the builtin ID
field to achieve generate sequence no in a list
every time a new item created in list
for this i used update list item action in workflow, its working fine but
i have a problem here user who login into sharepoint site and create a new list item
has only Create ,View Permissions only,
i created a Requesters permissions level with (Create,view ) rights only i did not added Edit Rights
because this user only create list items only he will not edit the list item.
adilHello adil,
If user is having "Add Items" rights then item ID should be created automatically and this is auto generate column in list.
Why you are using "update list item action"? Are you updating any other field?
If updating any other column value then add Impersonation steps in your code to update item.
http://sharepoint.stackexchange.com/questions/16232/impersonation-step-in-sharepoint-designer-2010
http://sharepointgroup.wordpress.com/2012/05/10/how-to-use-work-flow-to-change-list-item-permissions-by-sharepoint-designer-2010/
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help -
DB6 Installation - error on phase VIEW (CREATE VIEW "/BEV1/LAVMVA1_V)
Dear all,
I install LNX X86_64, DB6 - ERP 6.0 EHP4, during phase IMPORT ABAP I've got error in SAPVIEW.log:
usr/sap/SID/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
/usr/sap/SID/SYS/exe/run/R3load: version R7.01/V1.4 [UNICODE]
Compiled Dec 25 2009 23:46:01
/usr/sap/SID/SYS/exe/run/R3load -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(DB) ERROR: DDL statement failed
( DROP VIEW "/BEV1/LAVMVA1_V" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
( CREATE VIEW "/BEV1/LAVMVA1_V" ( "MANDT", "BSTNK", "VKORG", "VTWEG", "SPART", "VKBUR", "VKGRP", "KUNNR", "ERNAM", "BSTDK", "AUART", "VBELN" ) AS SELECT T0001."MANDT", T0001."BSTNK", T0001."VKORG", T0001."VTWEG", T0001."SPART", T0001."VKBUR", T0001."VKGRP", T0001."KUNNR", T0001."ERNAM", T0001."BSTDK", T0001."AUART", T0002."VBELN" FROM "VBAK" T0001, "VBUK" T0002 WHERE T0002."MANDT" = T0001."MANDT" AND T0002."VBELN" = T0001."VBELN" AND ( T0002."VBOBJ" = 'A' OR T0002."VBOBJ" = 'L' ) )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(DB) INFO: disconnected from DB
/usr/sap/SID/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SID/SYS/exe/run/R3load: END OF LOG: 20100119153412
I have changed R3load, sapinst to newest version, space is enough, tablespaces are not full.
Do you have any idea what is cause of error and how to solve it?
Any help is appreciated.
Regards,
RomanHi Frank,
thanks for your very fast hints.
I have checked .log files SAPxxxx.log (SAP0000, SAPAPPL0, SAPAPPL1, ...) but there isnt any entry with VBAK.
When I entered under <sid>adm command: db2 describe table sap<sid>.VBAK it takes a long time wihtout any result.
Thanks a lot for your help.
Roman
Edited by: Roman Mikolas on Jan 19, 2010 4:27 PM
Edited by: Roman Mikolas on Jan 19, 2010 4:27 PM
Maybe you are looking for
-
Code doesn't update when uploading new files to website.
code doesn't update when uploading new files to website. I was using an old DW version for a long time then forced to upgrade when I bought my MacBook Pro. Now when I make changes to my pages and link to new files etc on my harddrive, when i upload
-
InDesign CS6 Plug-in development problem
Hello, IDE:Visual Studio 2010 Platform:Windows7-32 Version:Indesign CS6 Database:MySql-5.0.67-win32 ODBC:ODBC-5.1 The source code: URI uri("odbc://New/?table=jo_user#user_id,username,reset_key,activation,register_time,login_ count");//int,varchar,tin
-
Integration Scenarios and Enterprise Service Bundles
Hello, I understand the concept of both individually, but I am wondering about their relationship; e.g. there seem to be some identical names like Order to Cash for both. Can someone please explain the relationship. Thanks.
-
Can file adapter read file link/short cut
All, I have a requirement for following use case Can file adapter read a file-link (basically a short-cut to a file in a folder) and check if the file exists at the path referred to in the short-cut. Thanks, Praveen
-
How can i have same billing account with two different game center accounts
I Need two different game centeraccounts on two different devices thatshare same apple id