Creating views,iviews,Workbook
HI
how to create views,iviews and workbook?can u explain me step by step??
Thanks & Regards
Senthil
http://help.sap.com/saphelp_nw04/helpdata/en/33/746e393cf65c1ae10000000a114084/frameset.htm
Similar Messages
-
Hello,
I need to create a workbook which has the same row and key figures but each tab should have different countries.
a. Should I create three different queries restricting each query to the country I need to display
or
b. Can I create different views out of the same query?
- If so, how can I create query views and insert them into my workbook.
Taking performance into consideration, which method is the best.
All feedback is appreciated with points:)
Thanks for your help.
Please send your commentscreating three different queries is a better option.
View is a navigational state of the query and when you do not need all the data, it makes no sense to get all the data from the infoprovider and then restrict it. -
Creating a new workbook in Oracle Discoverer
I am not very familiar with Oracle Discoverer but have had to be involved in it recently. What i am trying to do is create a new business area. I logged on to the Oracle Discoverer administrator and followed these steps
- Create a new business area from online dictionary
- Selected the schema user
- Selected the tables/views i wanted to include in the business area
- Click finish
Now i have included the tables in the business area. When the user logs on to Oracle Discoverer he can see the 3 tables/views i selected. If they try to create a new workbook they can only include one of the tables in the workbook but not all 3 at the same time. If i include one table, the other two tables become 'disabled' and cannot be included in the workbook.
Any ideas why this is happening?Hi ziggy
It sounds like you did not create any joins between the 3 folders. Those have to be in place in order for a user to be able to create reports from more than one folder.
If you are new to Discoverer administration I would suggest you get some training. Oracle offer great training at numerous locations around the country and there are numerous self-help locations that you can find if you plus Discoverer Training into any Google search box.
My company also has e-learning for Discoverer and you can find out more by visiting this website: http://ascbi.com
Best wishes
Michael -
How to create an Iview in BI 7.0?
Hi Experts,
i want to create iviews in Bi 7.0 but can not find how to do that.
I n the older version i could create a query and said save als Iview.
Could you please explain the steps.
1. how to create
2. where to store
3. How to open
4 How to publish in portal or to open als URL?
Many Thanky for the Informations
Cheers
GiloHi Gilo,
In iView defines the integrated view,which is going to give all integrated sourcesystems information to portal.
The Portal Content Studio provides a framework for creating iViews in 3 ways.
1.iView wizards
2.Copy&Paste actions
3.Content mirroring tools.
Creating iView Instances Using Copy-Paste
Use
You can instantaneously create new iViews without a wizard (see Object Creation Wizards) by copying existing iView instances using the portal's Copy, Paste, and Paste as Delta Link actions.
Both paste actions (Paste and Paste as Delta Link) create new iViews that are delta links instances; however, the relation of the new object to the one being copied differs. This difference is illustrated in the figure below.
■ The Content Mirroring tool can also be used to duplicate content. Delta links are generated between the original and copied objects. See Content Mirroring.
■ To view the delta link source objects and dependents of an object, use the delta link tracer. See Tracing Delta Link Dependencies.
Procedure
You use the Copy with the Paste and Paste as Delta Link actions with iViews just as you would other object types in the Portal Catalog.
For general usage instructions and a description of the commands, see Copying an Object or Folder (Copy & Paste).
As the first step you have to navigate to the right Portal Content folder, where you want to add the BI report as Portal iView.
Then you have to create a new iView using the context menu: New -> iView
Now you see the iView Wizard. In the first step you have to choose iView template create an iView from an existing iView template as source type.
In the next step you have to choose the iView template BEx Web Application iView.
Then you have to provide an ID (technical name of the Portal Content iView), a description, the iView ID Prefix and the master language of the iView.
Then you have to choose the version of the BEx Web Application. If you created the Web Template using the Web Application Designer based on SAP BW 2.x/3.x, you have to choose the appropriate option. If you have created the Web Template using the new Web Application Designer based on SAP NetWeaver 2004s, you have to choose the option SAP NetWeaver BI 7.x
In the next step you have to type in a prefix (depending on the version of the BEx Web Application) and the technical name of the Web Template. If you have used the SAP BW 2.x/3.x Web Application Designer version you have to use the prefix TEMPLATE_ID=. If you have used the Web Application Designer based on SAP NetWeaver BI 7.x, you have to use the prefix TEMPLATE= (e.g. TEMPLATE=MYTEMPLATE_ID).
In the last wizard step you can check your entries, you have made before. You can also set the flag Open for editing, when wizard completes. Then you can directly work on the BI iView to do some further adjustments.
After pressing the Finish-button in the iView wizard the iView properties show up. There you can select the property category Appearance Size. For the property Height Type you should select Automatic in order to avoid scroll bars on the portal page later on. Save your settings and close your BI iView
In the next step you want to add your newly created BI iView to a page. Therefore you have to first navigate to the page you want to add the new iView (or you can create a new page). Then you have to open the page via the context menu �� Open �� Object
To add the iView to the page you have to navigate again to the newly created iView. Via context menu you can add now the iView to the page: Right-mouse click on the iView �� Add iView to page �� Deltalink. Afterwards you save the page.
Finally you can do a preview to have a look at your new BI iView that is integrated into the portal page. Depending on the result you can adjust the page layout.
As a result you will see the BI iView on your portal page.
Before you can create a BI iView in the Enterprise Portal, the system connection and the alias of the BI system has to be defined. This can be done in the System Administration of the Portal �� System Configuration �� System Landscape
Also the user mapping to the BI system has to be maintained (in order to use single-sign on). This can be done in the user administration �� Identity Management -
How do I create an iView with multiple links to R/3 transactions
Hello Portal developers,
I'm looking for a solution for displaying multiple links on a single iView or Page. The requirement is calling for several SAP Transactions and a link to an external web application from a single view. Could or should this be done using KM Navigation iView, or creating separate iViews for each link and placing them in a page?
Thank you for your recommendations.Hi Terry,
Are the SAP Transactions fixed ?
I mean have you fixed that only these many transactions have to be displayed ?
If yes, better option would be to create separate iviews for each and assign these to the "Related Links" or "Dynamic Navigation" of a page.
IF no, that means, you want the user shall enter the transaction code and that transaction should open up in iview, then ofcourse you cant go in for the above solution.
Thanks,
Samta -
How to view all workbooks in a Business Area? (4i)
Discoverer 4i, Using Desktop Admin and Desktop Client.
I've got a user set in the Admin layer as:
Security -> Assigned to the Business Area and set as 'Allow Administration'
Privileges -> All 'User' and 'Administration' options ticked
When I log in with this user to the Desktop Client and go on to any responsibility I see no workbooks (or only workbooks that are created/shared to the user or chosen responsibility).
It was my understanding that when a user is set as a Business Area Administrator and has all the Admin privileges they should be able to view all workbooks? I've certainly see this functionality in the past although I'm not sure if this was a Disco 10g function.
Thanks in advanced for any responses,
TimOfficial answer from ODM on Metalink:
"+The behaviour you see is expected behaviour for all Discoverer releases from ver 3i to 11g . Only the owner of the workbook can see the workbook or can share the workbook to other users . Any other user (with or without Discoverer admin priviliges) is not able to see / manage the non-owning workbooks.+"
I.e. this can't be done... -
How to create Customized Iview in MSS
Hi Gurus ,
we are currently using MSS, as per requirement we need to create a custmized IVIEW in MSS using JavaWEBDYNPRO .
Please let me know .
1) where i can create javawebdynpro,is anywhere i can sample programs of JavaWebdynpro to check how SAP tables and FM being used in the Java code ...?
2) How to create Iview in the MSS ?
3) How do i Call Javawebdynpro in the MSS?
ViswaRani1. the simplest solution to your requirement is create a webdynpro(abap) application using following function modules.
HRMSS_RFC_STRUCTURE_GET
PT_ARQ_ACCOUNTS_GET
BAPI_ABSENCE_CREATE
The effort of above will be 2-3 days
2. If you want to develop an applicaiton that can be integrated to the team viewer then its simple,
build an application with above RFCs either in abap or java and just integrate the iview to the team viewer as per note 1112733.
with new release all the team viewer iviews throw portal event that passes a string and your application can catch that string. so if you select an employee as a manager then that is passed from the team viewers to all the iview that are covered under the page. read note 1112733 its really good.
these approches are already implemented for various customers and working absolutely fine. Discuss with your customer before you decide on the approach.
Edited by: Barin Desai on May 8, 2009 1:41 PM -
Swith between query views in workbook
Hi,
Is there a way to switch between two or more query views in a workbook.
I'm in 7.0 analyser.
Thanks in advance.
Prakash CHi,
Thanks for your reply.
I will explain the issue again so please tell me the process we are following is correct or not?
Last month we created views for two queries and attched them in the workbook, the variable values which we have given at that time were month = 01 year 2010.
This month when we try to access the workbooks we are getting 0 records in the views of the workbook.
now my doubt is:
If we create views for variable values month jan and year 2010, will they show output when we change the variable values to Feb, 2010?
or
Do we have to create new views every month and attach them to the existing workbook manually?
PLease revert.
Thanks
SC -
Query Views in Workbook are not getting refreshed
HI Folks,
Query views atatched in workbook are not showing any data when we move from previous month to current month. So we are creating views for current month and attaching them to workbook manually at this moment.
Please advise what needs to be done to make the views get refreshed automatically according to the variable values we select.
Regards,
SCHi,
Thanks for your reply.
I will explain the issue again so please tell me the process we are following is correct or not?
Last month we created views for two queries and attched them in the workbook, the variable values which we have given at that time were month = 01 year 2010.
This month when we try to access the workbooks we are getting 0 records in the views of the workbook.
now my doubt is:
If we create views for variable values month jan and year 2010, will they show output when we change the variable values to Feb, 2010?
or
Do we have to create new views every month and attach them to the existing workbook manually?
PLease revert.
Thanks
SC -
Problem with embeding the same view in dynamically created view container
Hello Experts,
I am getiing a dump when i try to embed the same view inside the dynamically created view container of
dynamically created tabs of a tabstrip
The requirement go like this, i have 2 views in which i have have to embed the 2nd view to view1 where i have an empty
tabstrip without tabs. During runtime i create tabs as well as view containers accordingly and then try to embed view2 in tabs.
I have put the below mentioned code in HANDLEIN,
DATA: lref_vcntlr TYPE REF TO if_wd_view_controller,
lref_comp TYPE REF TO if_wd_component_usage,
lv_embed_pos TYPE string.
lref_vcntlr = wd_this->wd_get_api( ).
lv_embed_pos = 'FILE_PERS_EDIT/VC_GENERAL'.
TRY.
CALL METHOD lref_vcntlr->do_dynamic_navigation
EXPORTING
source_window_name = 'FILE_PERSISTENCE_WND' " Window
source_vusage_name = 'FILE_PERS_EDIT_USAGE_1' " Source View usage
source_plug_name = 'TO_EDIT_LAYOUT' " Outbound plug
target_view_name = 'PERS_EDIT_LAYOUT' " Second view to be embedded
target_plug_name = 'IN' " Second view inboun plug
target_embedding_position = lv_embed_pos
RECEIVING
component_usage = lref_comp.
CATCH cx_wd_runtime_repository .
ENDTRY.
wd_this->fire_to_edit_layout_plg( ).
This works fine for the first time.
However onaction tab select i change the embeding position( 'FILE_PERS_EDIT/view container name of different tab') of the view2 an try to embed view2 in a different tab.
At this point i get a dump stating View2 already present in the window 'FILE_PERSISTENCE_WND' of component.
I think, the view2 embediing has to be removed before i add the view2 in a different tab
Kindly let me know how to remove view2 embedding from tab1 before i add a view2 to a different tab or is there any other
means to handle this problem?
Thanks & Best Regards,
Srini.Hello Srini,
I found a solution to your problem, because I had a similar task.
In WDDOINIT I changed the method do_dynamic_navigation to if_wd_navigation_services_new~prepare_dynamic_navigation:
DATA:
l_view_controller_api TYPE REF TO if_wd_view_controller.
l_view_controller_api = wd_this->wd_get_api( ).
TRY.
CALL METHOD l_view_controller_api->if_wd_navigation_services_new~prepare_dynamic_navigation
EXPORTING
source_window_name = 'WDW_MAIN'
source_vusage_name = 'VW_SUB_USAGE_1'
source_plug_name = 'TO_VW_CONTENT'
target_component_name = 'ZTEST_DYNAMIC'
target_view_name = 'VW_CONTENT'
target_plug_name = 'DEFAULT'
target_embedding_position = 'VW_MAIN/VC_TAB.VW_SUB/TAB1_VC'
RECEIVING
repository_handle = wd_this->g_rep_handle.
CATCH cx_wd_runtime_repository .
ENDTRY.
wd_this->fire_to_vw_content_plg( param1 = 'TAB1' ).
In the action I first deleted the navigation targets, then navigated to the empty-view and last I called my target view:
DATA:
lv_position TYPE string,
l_view_controller_api TYPE REF TO if_wd_view_controller,
lr_view_usage TYPE REF TO if_wd_rr_view_usage,
lr_view_***_t TYPE wdrr_vca_objects,
lr_view_*** LIKE LINE OF lr_view_***_t.
l_view_controller_api = wd_this->wd_get_api( ).
lr_view_usage = wd_this->g_view->get_view_usage( ).
lr_view_usage->delete_all_navigation_targets( plug_name = 'TO_VW_CONTENT' ).
CLEAR lv_position.
CONCATENATE 'VW_MAIN/VC_TAB.VW_SUB/' old_tab '_VC' INTO lv_position.
TRY.
l_view_controller_api->if_wd_navigation_services_new~do_dynamic_navigation(
source_window_name = 'WDW_MAIN'
source_vusage_name = 'VW_SUB_USAGE_1'
source_plug_name = 'TO_EMPTYVIEW'
target_component_name = 'ZTEST_DYNAMIC'
target_view_name = 'EMPTYVIEW'
target_plug_name = 'DEFAULT'
target_embedding_position = lv_position ).
CATCH cx_wd_runtime_repository.
ENDTRY.
CLEAR lv_position.
CONCATENATE 'VW_MAIN/VC_TAB.VW_SUB/' tab '_VC' INTO lv_position.
TRY.
wd_this->g_rep_handle = l_view_controller_api->if_wd_navigation_services_new~prepare_dynamic_navigation(
source_window_name = 'WDW_MAIN'
source_vusage_name = 'VW_SUB_USAGE_1'
source_plug_name = 'TO_VW_CONTENT'
target_component_name = 'ZTEST_DYNAMIC'
target_view_name = 'VW_CONTENT'
target_plug_name = 'DEFAULT'
target_embedding_position = lv_position ).
CATCH cx_wd_runtime_repository.
ENDTRY.
wd_this->fire_to_vw_content_plg( param1 = tab ).
Ann.: I my example, I had 3 views: VW_MAIN which embedds VW_SUB. VW_SUB has the tabs in it and VW_SUB embedds VW_CONTENT.
BR,
Roland -
Create view and alter Session gets 0RA-01031
I can't create a view after using ALTER SESSION set current_schema without using an explicit schema. I get ORA-01031. Is this a known bug? Here are the details:
1. Log on as SYSTEM
2. ALTER SESSION set current_schema=FRED;
3. CREATE VIEW vFoo as select * from Foo; -- ORA-01031: insufficient privileges
4. CREATE VIEW FRED.vFoo as select * from Foo; -- this works!
I've read where some privileges need to be granted directly. In fact, if Fred grants select privilege on Foo to SYSTEM, the statement in #3 above works. However, something doesn't seem right because why does #4 succeed without the GRANT?
In case you're wondering why I don't just use #4 above, which does work, it's because I've got a script that will be run by customers to create tables, views, etc. in an arbitrary schema and the schema is associated with a user with limited permissions. Hence, the use of the ALTER SESSION.See, You looged as SYSTEM (Scheme = SYSTEM)
Now you alter your session to another schema FRED.
Now if you want to access SCHEMA of FRED, You need to connect first.
SQL > connect user/password@host
Then
SQL > CREATE VIEW vFoo as select * from Foo;
View created. -
In generic extration how to create view
HI
In se11 i try to create view using two table vbap and vbak .
vbak mandt vbap mandt
vbak vbeln vbap vbeln for join condion
and also i fill view field tab but the view is no cretated. It give error field name MANDT is not unique. please anyoone clar the error.
By
RajanHi Rajan,
You cannot use one field twice in a View.
If you need the Field "MANDT" from both the tables, change the description as MANDT_VBAK & MANDT_VDAT in View Field column & select it from the respective tables in "Table column".
Hope it helps!
Regards,
Pavan -
How to create a iview in eclipse for connecting R/3 using JCA?
Hi everybody,
I want to create a iview in eclipse for connecting R/3 using JCA. Can any body send me java code for this purpose. i tried one example from sdn in eclipse but i did't get any code for the same.
thanking you
Rajendrahttps://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/sap connector examples download.htm
-
How can I create an iView without visual components in VC
Hello:
I'm trying to create an iView with on ly a call to a data service inside: start point, call, end pont. But VC it's giving me errors when I compile it.
If I add a visual component to the iView: form, table, html. Iview compiles and works OK.
theer is any wat ti create non visual iViews in VC?.
Thank you in advance.
Regards.Hello Basheer :
I'm getting an error when I'm deploting the iView. That error is only when I deploy as Flex.
If I deploye as Webdynpro or Flex2, there are no deployments errors.
The error text is not ver specific it says that I need to check the flex log.
Do you know wher I can chech that deployment flex log?. I'm not sure if I'm checking the correct log.
Thank you very much for your help.
Regards. -
How to CREATE VIEW to merge two tables each of which has CLOB-typed column
I failed in creating a view to merge two tables that have CLOB-type column each.
The details are:
Database: Oracle 9i (9.2.0)
Two tables "test" and "test_bak", each of which has the following structure:
ID Number(10, 0)
DUMMY VARCHAR2(20)
DUMMYCLOB CLOB
The following operation fails:
create view dummyview (id, dummy, dummyclob) as
select id, dummy, dummyclob from test
union
select id, dummy, dummyclob from test_bak;
I was announced:
select test.id, test.dummy, test.dummyclob
ERROR in line 2:
ORA-00932: inconsistent data type: required - , but CLOB presented.
But if creating views from only ONE table with CLOB-type columns, or from two tables WITHOUT CLOB-typed columns, the creation will succeed. The following 1) and 2) will succeed, both:
1) one table, with CLOB-typed column
create view dummyview (id, dummy, dummyclob) as
select id, dummy, dummyclob from test;
2) two tables, without CLOB-typed columns
create view dummyview (id, dummy) as
select id, dummy from test
union
select id, dummy from test_bak;
I want to merge the two tables all, with complete columns, how to write the CREATE VIEW SQL statement?
many thanks in advanceDong Wenyu,
No.
But you could do this:
SELECT source.*, nvl (tab1.clob_column, tab2.clob_column)
FROM your_table1 tab1, your_table2 tab2, (
SELECT primary_key, ...
FROM your_table1
UNION
SELECT primary_key, ...
FROM your_table2
) source
WHERE source.primary_key = tab1.id (+)
AND source.primary_key = tab2.id (+)
In other words, do the set operation (UNION (ALL)/INTERSECT/MINUS) on just the PK columns before pulling in the LOB columns.
d.
Maybe you are looking for
-
Did a software update (the latest for iMac) for iTunes and now iTunes will not open
iTunes will not open after the update completed. I tried to downgrade back to the previous for iTunes but I cannot access my downloads....I seriously need help from someone.....HELP
-
Jog forward one Field at a time?
Is it possible to jog forward one field at a time in iMovie? With FCP X, I think it's Option-Right Arrow. Thanks.
-
Error: The following required field is missing from the launch file: jnlp
PLEASE help me. I was at Starbuck's today trying to install new software for my new wireless internet card and when I finished I could no longer access any of my applications that require java... I have a macbook pro dual platform computer. When I tr
-
BT Cloud App for Mac - Upload freeze issues?
Anyone experiencing freeze issues during upload sessions? I just downloaded the app yesterday and kicked off an upload of 20K (ish) files. It progressed nicely through the day, but clearly froze at some point during the night. Following a reboot I
-
Can you use iBooks Author to create for Newsstand
Hi.If you create a book or magazine with iBooks Author can you then put it on Newsstand as well or would it need to be in a different format? Thanks in advance.