Creating Virtual Directories

How to Create our own Virtual Directories in iAS. Though i specify the Alias correctly in 6iserver.conf file, virtual directory is not being created, i also checked after restarting my machine.
Any Clues...
Gopi Kumar

Virtual directory are defined into httpd.conf file.
Look at the Alias directive.
Best regards, Marcelo.
PD: httpd.conf file resides into $ORACLE_HOME/Apache/Apache/conf directory.

Similar Messages

How to create virtual directories on WLS 5.1

Hello, I'm new using BEA WLS, and I've already read all articles on this forum
about how to get virtual directories, but I cannot achieve this, please, would
anyone be so kind to tell me how may I do this?, or to be so kind to tell me where
may I get related and useful information to accomplish this task, please?
I sincerely appreciate your attention and time on this matter, thanks,
Miguel Angel Avila Vqz

I sincerely appreciate your help Mr. Scott, I'll review all the documentation you
refers,
Thank you so much again!
I hope I can help you someday too,
Best regards,
"Wayne W. Scott" <[email protected]> wrote:
>
>
Miguel Angel Avila Vazquez wrote:
Hello, I'm new using BEA WLS, and I've already read all articles onthis forum
about how to get virtual directories, but I cannot achieve this, please,would
anyone be so kind to tell me how may I do this?, or to be so kind totell me where
may I get related and useful information to accomplish this task, please?
I sincerely appreciate your attention and time on this matter, thanks,
Miguel Angel Avila VqzHi Miguel:
I was working on a case this afternoon related to the "FileServlet."
Several articles I
found which discuss this. I have them open on my desktop at the office,
but I am home
now. Try going to the AskBEA part of support -- http://support.bea.com/application
and make sure the "Products" says BEA WebLogic Server. In the search
box, I entered
"fileservlet virtual directory configure" and after hitting Enter, got
plenty of
articles to read.
You can also search the documentation for 'fileservlet'
http://www.weblogic.com/docs51/resources.html
http://search.bea.com/weblogic/go50/
http://www.weblogic.com/docs51/classdocs/API_servlet.html
Do you have any service packs installed? You will probably need them.
Thank you,
Wayne Scott
BEA Support
Liberty Corner, NJ

Sccm 2012 DP failed to create iis virtual directories

I am trying to install a branch server as Sccm 2012 DP.
I already installed around 15 branch servers without any problems.
The problem I have is that the branch server failed to create iis virtual directories.
In my console under Monitoring, component status It writes that Distribution Manager successfully installed iis component of operating system to distribution point ""
Next it writes error to send packages to that branch server.
The site server distmgr.log shows the error below:
Failed to start primary service wdsserver
Microsoft Sql Server Native Client 11.0 login failed for user "xxx"
Failed to connect to the sql server connection type : SMS ACCESS
for Display = \\myserver\mswnet: sms_site= XXX failed to get master SCF.
Currently site xxx is initializing site control data. Cant get Master SCF from database at this time. will try later.
DPConnection;;;; ConnectWMI() failed to connect to branch server.
I try to remove the dp role, leave it for 12 hours reboot the server and assign the role again but same problem.
Any idea ?
Nikkoscy

Hi,
Have you installed all features required?
Technet prerequisite list for site system roles:
http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SiteSystemRolePrereqs
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Exchange 2013 Autodiscover and Webservices virtual directories with wrong address

Hey people,
I have 3 2013 Servers
Server 1 CAS
Server 2 & 3 MBX
having a bit of trouble here - everything was working fine after migration (about 6months ago), and now mac users can't access e-mail.
If I try to access EWS page (https://webmail.domain.co.ao/EWS/exchange.asmx) , i get
Service
You have created a service.
To test this service, you will need to create a client and use it to call the service. You can do this using the svcutil.exe tool from the command line with the following syntax:
svcutil.exe https://SERVER2.domain.int:444/EWS/Services.wsdl
If I try to access the autodiscover webpage, i get
<?xml version="1.0" encoding="UTF-8"?>
-<Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">-<Response>-<Error Id="1286627925" Time="17:58:59.7730521"><ErrorCode>600</ErrorCode><Message>Invalid Request</Message><DebugData/></Error></Response></Autodiscover>
When testing outlook web services, i get the following error
[PS] C:\Windows\system32>Test-OutlookWebServices
Source ServiceEndpoint Scenario Result Latency
(MS)
SERVER2.domain.int webmail.domain.co.ao Autodiscover: Outlook Provider Failure 64
SERVER2.domain.int Exchange Web Services Skipped 0
SERVER2.domain.int Availability Service Skipped 0
SERVER2.domain.int Offline Address Book Skipped 0
if i run
[PS] C:\Windows\system32>Get-AutodiscoverVirtualDirectory | fl
Creating a new session for implicit remoting of "Get-AutodiscoverVirtualDirectory" command...
RunspaceId : 9f23dad1-7806-42a6-8545-89b66847a359
Name : Autodiscover (Default Web Site)
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity, OAuth}
ExternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity, OAuth}
LiveIdNegotiateAuthentication : False
WSSecurityAuthentication : True
LiveIdBasicAuthentication : False
BasicAuthentication : True
DigestAuthentication : False
WindowsAuthentication : True
OAuthAuthentication : True
AdfsAuthentication : False
MetabasePath : IIS://SERVER1.domain.int/W3SVC/1/ROOT/Autodiscover
Path : C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\Autodiscover
ExtendedProtectionTokenChecking : None
ExtendedProtectionFlags : {}
ExtendedProtectionSPNList : {}
AdminDisplayVersion : Version 15.0 (Build 775.38)
Server : SERVER1
InternalUrl : https://webmail.domain.co.ao/autodiscover/autodiscover.xml
ExternalUrl : https://webmail.domain.co.ao/autodiscover/autodiscover.xml
AdminDisplayName :
ExchangeVersion : 0.10 (14.0.100.0)
DistinguishedName : CN=Autodiscover (Default Web
Site),CN=HTTP,CN=Protocols,CN=SERVER1A,CN=Servers,CN=Exchange Administrative
Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=DOMAIN,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=int
Identity : SERVERONE\Autodiscover (Default Web Site)
Guid : fbed978f-7442-46ac-bb3c-53d9d7995507
ObjectCategory : domain.int/Configuration/Schema/ms-Exch-Auto-Discover-Virtual-Directory
ObjectClass : {top, msExchVirtualDirectory, msExchAutoDiscoverVirtualDirectory}
WhenChanged : 12/19/2013 10:30:26 AM
WhenCreated : 12/19/2013 10:30:26 AM
WhenChangedUTC : 12/19/2013 9:30:26 AM
WhenCreatedUTC : 12/19/2013 9:30:26 AM
OrganizationId :
OriginatingServer : DC2.domain.int
IsValid : True
ObjectState : Changed
and run
[PS] C:\Windows\system32>Get-WebServicesVirtualDirectory | fl
RunspaceId : 9f23dad1-7806-42a6-8545-89b66847a359
CertificateAuthentication :
InternalNLBBypassUrl :
GzipLevel : High
MRSProxyEnabled : False
Name : EWS (Default Web Site)
InternalAuthenticationMethods : {Basic, Digest}
ExternalAuthenticationMethods : {Basic, Digest}
LiveIdNegotiateAuthentication :
WSSecurityAuthentication : False
LiveIdBasicAuthentication : False
BasicAuthentication : True
DigestAuthentication : True
WindowsAuthentication : False
OAuthAuthentication : False
AdfsAuthentication : False
MetabasePath : IIS://SERVER1.domain.int/W3SVC/1/ROOT/EWS
Path : C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\EWS
ExtendedProtectionTokenChecking : None
ExtendedProtectionFlags : {}
ExtendedProtectionSPNList : {}
AdminDisplayVersion : Version 15.0 (Build 775.38)
Server : SERVER1
InternalUrl : https://webmail.domain.co.ao/EWS/exchange.asmx
ExternalUrl : https://webmail.domain.co.ao/EWS/exchange.asmx
AdminDisplayName :
ExchangeVersion : 0.10 (14.0.100.0)
DistinguishedName : CN=EWS (Default Web Site),CN=HTTP,CN=Protocols,CN=SERVRE1,CN=Servers,CN=Exchange
Administrative Group (FYDIBOHF23SPDLT),CN=Administrative
Groups,CN=DOMAINL,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domainl,DC=int
Identity : SERVER1\EWS (Default Web Site)
Guid : cbdd447b-54f8-4bba-9834-6c28b807711e
ObjectCategory : domain.int/Configuration/Schema/ms-Exch-Web-Services-Virtual-Directory
ObjectClass : {top, msExchVirtualDirectory, msExchWebServicesVirtualDirectory}
WhenChanged : 12/19/2013 9:31:11 AM
WhenCreated : 12/19/2013 9:31:11 AM
WhenChangedUTC : 12/19/2013 8:31:11 AM
WhenCreatedUTC : 12/19/2013 8:31:11 AM
OrganizationId :
OriginatingServer : DC2.domain.int
IsValid : True
ObjectState : Changed
Summarizing:
webmail.domain.co.ao maps to server1
Autodiscover and exchange web services point out to server1 (CAS), but when openning the respective webpages, the result is an error.
I have already deleted and recreated the autodiscover and EWS virtual directories but with no success.
Help anyone?
Many thanks,
Andrey

Hi Andrey,
Exchange Web Service in Exchange server configuration is working for all users in your Exchange environment, not just for one specific user. If you want to double make sure the EWS service in client side, we can directly access the EWS URL in IE of your
Windows machine, and see whether a proper XML file is returned. If so, then we can safely ignore the web service test result.
As for automatic signature application, do you mean
Add a signature automatically to every message? Please try to remove the signature and reset it again to check whether the issue persists.
Thanks,
Winnie Liang
TechNet Community Support

Steps to create Virtual Directory?

I am very new to Weblogic and trying to create 2 virtual directories with
the following permissions.
name=cognos
path=c:\program files\cognos\cer1\webcontent\default.htm
permission=read
name=cognos/cgi-bin
path=c:\program files\cognos\cer1\cgi-bin
permission=execute
How?

Hi.
I'm not sure what you are trying to do here. What are you trying to
accomplish with these virtual directories? It's not entirely clear how you
want them to relate to WebLogic.
Thanks,
Michael
Rich Hauck wrote:
I am very new to Weblogic and trying to create 2 virtual directories with
the following permissions.
name=cognos
path=c:\program files\cognos\cer1\webcontent\default.htm
permission=read
name=cognos/cgi-bin
path=c:\program files\cognos\cer1\cgi-bin
permission=execute
How?--
Michael Young
Developer Relations Engineer
BEA Support

Creating virtual directory with OC4J

Hello, all.
I thought this issue was going to be straight-forward, but after searching this forum and the General one I am not so sure.
Can someone tell me how to create virtual directory mappings or contexts for 10gAS so that jsps that reside in an remote directory (not under OAS_HOME) can be run through OC4J? The remote directory is already defined as a virtual directory in Apache and a servlet some of the pages hit is also deployed in OC4J.
I read that you should be able to use OEM to update either the global-web-application.xml file or the orion-web.xml file, but I am unsure as to whether you create the virtual directories for the dms or webapp applications? I need the virtual directory to be available to more than one particular app.
Thanks for any help,
Dixie.

I don't know if one can use the apache virtual directory in oc4j, however, you can archive the same effect by using the
<virtual-directory real-path="pathRelativeToContextRoot" virtual-path="realPath" />
element in orion-web.xml. Please see the doc at
http://download-west.oracle.com/docs/cd/B10464_05/web.904/b10321/confdesc.htm#1019473
which is Oracle Application Server Containers for J2EE Servlet Developer's Guide, chapter 6 Configuration File Descriptions, Element Descriptions for global-web-application.xml and orion-web.xml
I believe you jsps will work if put in the virtual directory.

SWSE logical profile apply don't crete virtual directories

Hello,
I have installed Siebel 8.2 server on my Windows 7 machine.
I have completed install &configuration for Gateway Name Server, Siebel Enterprise Server, Sieber Server & SWSE.
All servers & Oracle database services are running.
After applying SWSE logical profile virtual directories are not getting created in IIS.
PFB configuration used while applying SWSE logical profile.
AppServerHostName=windows7test
ConfigMode=VERT
ConfigTask=ConfigureSWSEPhysical
current_section=
current_step=Response
DeployedLanguage=ENU
DoubleQuote="
eappscfgExists=C:\siebel\8.2.2.0.0\ses\gtwysrvr\admin\Webserver\eapps.cfg
eappsprofile=C:\siebel\8.2.2.0.0\ses\gtwysrvr\admin\Webserver
EnableVirtualHosts=false
EnterpriseServer=
EVTWelcome=Configuration Wizard Hint: Siebel Bookshelf provides searchable documentation. For EVT command-line help run evt -? or EVT -h.
first_section=InitialSetup
first_step=MainTask
GatewayAddress=
GatewayCreateDefaultRead=
GatewayUseDefaultRead=
HostName=windows7test
LoadBalancerOption=SingleServer
LoadBalancingServer=windows7test:2321
MainTask=Create
OperatingSystem=windows 7
OSDirSeparator=\
OSType=x86
RequestComponent=SRMSynch
RequestServer=
SCBPort=2321
SiebelBinDir=c:\siebel\8.2.2.0.0\sweapp\bin
SiebelDbsrvrRoot=c:\siebel\8.2.2.0.0\sweapp\dbsrvr
SiebelEncryption=
SiebeLibDir=c:\siebel\8.2.2.0.0\sweapp\lib
SiebelInstalledDir=c:/siebel/8.2.2.0.0/sweapp
SiebelLanguage=ENU
SiebelLogArch=
SiebelLogDir=
SiebelLogEvents=
SiebelLogFile=
SiebelMaxThreads=
SiebelMsgDir=c:\siebel\8.2.2.0.0\sweapp\locale\enu
SiebelPassword=
SiebelProgName=
SiebelRoot=c:\siebel\8.2.2.0.0\sweapp
SiebelRootParm=-h c:\siebel\8.2.2.0.0\sweapp
SiebelTableOwner=
SiebelTempDir=c:\siebel\8.2.2.0.0\sweapp\temp
SiebelUser=
SiebelVersion=8.2.2 SIA [22314] ENU
SWSERoot=c:\siebel\8.2.2.0.0\sweapp
SWSEServer=c:\siebel\8.2.2.0.0\sweapp\Admin\Webserver
TraceLevel=1
UnicodeEnable=
WindowsSystemRoot=C:\Windows\system32
I am logged in as Admin user of my windows 7 machine.
I have provided read/write permission on entired C:\siebel directory for windows Admin user as well as IIS_USRS.
IIS version is 7.5.7600.16385.
Please help me dig down what may be going wrong.
Thanks,
Harshal

Hello,
As I see this version of IIS comes as a default with Windows 7.
I tried to look how it can be downgraded to IIS 6 but no help.
So can you please tell me how we can user siebel web services in such case?
Is there any other web server component in siebel that we can use instead of IIS or any settings in IIS 7?
Thanks,
Harshal

Creating virtual tours on the internet

Is Director the best program for creating virtual tours out
of panoramic shot jpg's? If not, what is? Flash? Fireworks?

Director can certainly do it, and you could make use of
director's 3d hardware capabilities. If your panoramic images are a
cylindrical map, spherical map or cube map, you'd probably get best
results by using the image as a texture mapped to the inside faces
of the appropriately shaped 3d primitive (cylinder, box or sphere).
You might also want to look into quicktime VR, if you don't
want to get into the programming side of things.
- Ben

Offline address book virtual directories. powershell

Hi ,
how can i using powershell, to add a another oab virtual directory to the offline address book virtual directories.
Get-offlineaddressbook |fl virtualdirectories will bring all existing ones. I want to be able to add another Virtual directory to this multi valued attribute
any help?
ammarhasayen

I know I am replying to a 2-year old thread, but I just worked out the answer and I feel this is a good place to share it. I also know my answer is for Exchange Server 2013, not 2010, but I hope it might help anyway.
$NewVirtualDirs = @()Get-OfflineAddressBook -Identity "Default Offline Address Book" | Select-Object -ExpandProperty VirtualDirectories | ForEach-Object { $NewVirtualDirs += $_.ObjectGUID.ToString() }$NewVirtualDirs += (Get-OabVirtualDirectory -Identity "lon-cas2\OAB (Default Web Site)").Guid.ToString()Set-OfflineAddressBook -Identity "Default Offline Address Book" -VirtualDirectories $NewVirtualDirs
I used the GUID because the Name property of the virtual directory does not include the machine name ("OAB (Default Web Site)" instead of "lon-cas2\OAB (Default Web Site)")
The following code (my first approach) does not work (which is a shame).
Set-OfflineAddressBook -Identity "Default Offline Address Book" -VirtualDirectories @{Add="lon-cas2\OAB (Default Web Site)"}
As an aside, I think Fiona's question "May I know why you want to create additional OAB VD?" needs addressing. The answer is 'For fault tolerance." A single OAB virtual directory is a single point of failure, which is bad. I'm a little
surprised a moderator here doesn't understand the value of fault tolerance.
Craig D. Beere, MCT

Restore the deleted extended IIS web site into Virtual directories

Hi,
i deleted the IIS site from virtual directories and as well from IIS. But still i can see the extended web site zone in the Central administration, General Settings from the remove SharePoint from IIS web site. now question is there any way i can restore
the deleted iis site zone any how?
Thanks

Hi Trevor,
Thanks for your answer. i need some suggestion regarding on going issue. First i have created a web application at port 80 when it was in singer server and then i extended to 443 and 80 in multi-tier farm as you can see in the below image
And then i deleted IIS site from IIS itself and from Virtual directories as you can see in the below picture. Then i blinded the "SharePointDemo-80" site with host header at port 443 With default zone AAM. now i can access the site well but problem
is if i want to deploy any custom solution, getting error "The web.config is invalid on this IIS web site: "C:\inetpub\wwwroot\wss\VirtualDirectories\demoportal.bbcat.local80\web.config. " and also crawler is not crawling any items. my
understanding is, as there is no IIS site into virtual directories obviously will throwing error. Usually first i create web application at different port (example 8080) and then extend the application to 80 or 443. As i have already place this web application
and did customization, what will be the best way to handle this situation?
Thanks in advanced!!

Virtual directories on second exchange server

On my first Exchange install I changed all the virtual directory's to point to mail.domain.com. I've added a second exchange server to another site and have round robin dns including the host name in the A record "mail". Would I also
change the virtual directories on the second server to mail.domain.com?

Hi
You can create a DAG if the servers are on the same OS and same version.
You can then install your certificate that has the name mail.domain.com and change your urls to match the first server.
You need to update DNS with a A record if you using Round Robin so that mail.domain.com points to server A but also server B, so in short you will have 2 records with the same name but pointing to different servers.
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Multiple OWA & ECP Virtual Directories on Exchange 2010 - 500 internal server error

hello folks,
I've been using below link to create multiple owa & ecp virtual directories on exchange 2010, but I have similar error -500 internal server error
during auth.owa from my 2nd owa url login.
exactly steps follow as below:-
http://johnyassa.wordpress.com/2012/06/07/publish-multiple-owa-ecp-virtual-directories-on-one-exchange-2010-cas-server/
did anyone has come across on this issue and do mind share to me?
thanks
regards
Jimmy

hi Ed Crowley,
thanks for responding to me...
yes, I'm exactly follow blog below to configure my 2nd OWA URL with form based authentication method. upon login to my 2nd OWA URL, the owa authentication failed with return 500 - internal server error.
http://johnyassa.wordpress.com/2012/06/07/publish-multiple-owa-ecp-virtual-directories-on-one-exchange-2010-cas-server/

Exchange Server 2010 get error HResult = -2147024891 when Accessing Virtual Directories on CAS

I've just installed a Exchange 2010 server in an Exchange 2007 server environment.
The 2007 enviroment include two exchange server "Server-A" and "Server-B"
and "Server B" has dead on hardware issue for half year.
When I go to Microsoft Exchange On-Premises -> ServerConfiguration -> Client Access and receive the following error message
An IIS directory entry couldn't be created. The error message is Access is denied. . HResult = -2147024891 It was running the command 'Get-OabVirtualDirectory'
I try run the “Get-OwaVirtualDirectory” in powershell and get following result
From the power Shell command prompt .. Run
[PS] C:\Windows\system32>Get-OwaVirtualDirectory
An IIS directory entry couldn’t be created. The error message is Access is denied.
. HResult = -2147024891
+ CategoryInfo : NotInstalled: (<Server-B\Exchange (Default Web Site):ADObjectId) [Get-OwaVirtualDirectory]
, IISGeneralCOMException
+ FullyQualifiedErrorId : 4B12EB5D,Microsoft.Exchange.Management.SystemConfigurationTasks.GetOwaVirtualDirectory
I've google that i need to add "Exchange Trusted Subsystem" as a member in local admin group in Exchange 2007
but my exchange 2007 "Server-B" already dead, how should i fix it?
Appreciate for any help!!

re-create the new virtual directories does not work for me.
still got the error
An IIS directory entry
couldn’t be created. The error message is Access is denied.
. HResult = -2147024891
+ CategoryInfo : NotInstalled: (<Server-B\Exchange (Default Web Site):ADObjectId) [Get-OwaVirtualDirectory]
, IISGeneralCOMException
+ FullyQualifiedErrorId : 4B12EB5D,Microsoft.Exchange.Management.SystemConfigurationTasks.GetOwaVirtualDirectory
I don't understand why change new exchange server 2010 setting require me to have permission to access
my dead exchange server 2007

How Create Virtual Directory On Oracle Application Server 10g on RHEL 5

Dear Sir
i have deployed my application on OAS 10g on RHEL 5 ,,now since my application is calling some pro*c programs and then they generate some text based reports on fixed folder named
/treas/temp
now i simply have to open these text based reports on web browser
WEB.SHOW_DOCUMENT('/forms/pcreport/'||v_filename);
but for that i need to create virtual directory name : " /pcreport " without code
kindlly help as its working on my developer suit 10g i created a virtual directory in my application server by making following entry in "orion-web.xml" file
<virtual-directory virtual-path="/pcreport" real-path="/u/treas/temp" />
kindlly help

(My paths shown, yours will be different)
In a text editor :
/u01/app/oracle/product/midtier/Apache/Apache/conf/httpd.conf
Add
Alias /pcreport/ "/u01/app/oracle/product/midtier/forms/pcreport/"
<Directory "/u01/app/oracle/product/midtier/forms/pcreport/">
Options Indexes
AllowOverride None
Order allow,deny
Allow from all
</Directory>
Create the pcreport directory.
Add a simple test page
vi /u01/app/oracle/product/midtier/forms/pcreport/test.html
<html>
<head>
<title>Simple test page </title>
<style type="text/css">
body {
margin-left: 20%;;
margin-right: 20%;
border: 1px dotted gray;
padding: 10px 10px 10px 10px;
</style>
</head>
<body>
<p>test!</p>
</body>
</html>
Test
http://yourserver.com:7777/pcreport/test.html
Best Regards
mseberg

Bash script question, how do I create multiple directories on one line

I am making a package for amavisd-new (yes I am aware that there is one in community but I can't say I like the way it is done).
I have an install script from which I want to create multiple directories if they do not exist.
So I want to create a directory /var/spool/amavis with subdirectories of var tmp virusmails spammassassin .
I can't seem to be able to find a way to do this on one line.

pelle.k wrote:
peets wrote:Hehe because it's less typing!
Good one!
Also, it's by far the more dynamic method.
If you want to get pedantic, it's also far less efficient in terms of execution time: each iteration of the loop forks a new process, whereas using a single mkdir command forks only once. The "best" way is the curly-braces method demonstrated above by chimeric.

Creating Virtual Directories

Similar Messages

Maybe you are looking for