Creating webpage in fireworks CS3. Is text searchable by search engines?

Hello all,
I started using fireworks cs3 to design webpages. I've been
using Dreamweaver cs3. I'm new to the whole flash designing. When
you put text and images to design your whole layout, is the text
searchable by search engines?
I noticed that once you save your file as a swf when you open
it you can't highlight any text to copy? I was wondering how I
would go about putting the meta tag info in and make the text so
the search engines would be able to scan the pages to pull up in
search results?
Thank you all!

FW can be used to create prototype HTML pages, but those
should never be
used for real production work. The code is fragile and
sub-optimal (as is
any wizard-based HTML). Your graphics application should be
used to produce
the images used on the page, which is created in Dreamweaver.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"ttech7" <[email protected]> wrote in
message
news:go028j$cic$[email protected]..
> Hello all,
>
> I started using fireworks cs3 to design webpages. I've
been using
> Dreamweaver
> cs3. I'm new to the whole flash designing. When you put
text and images
> to
> design your whole layout, is the text searchable by
search engines?
>
> I noticed that once you save your file as a swf when you
open it you can't
> highlight any text to copy? I was wondering how I would
go about putting
> the
> meta tag info in and make the text so the search engines
would be able to
> scan
> the pages to pull up in search results?
>
> Thank you all!
>

Similar Messages

How can my website searchable by search engine?

Hi all
My website is running with Dynamic DNS and I would like to know how can my website be searchable by search engines like Yahoo, Google? Do I need to register my site with them or it is not possbile with DDNS websites?
Also, I have seen website (like Yahoo) that if you bookmark it, you will see a little logo on the left of the bookmark in IE. Does anyone how to add the logo on the bookmark?
Thank you very much!
Edmond

Add the following code to each of your web Page
<LINK REL='SHORTCUT ICON' href='A.ICO'>

When I create a new tab it always presents a Yahoo search engine rather than my home page (Google). A new session of firefox does not do this but acts normally

When opening a new tab, the 'homepage' presented in the new tab is a Yahoo homepage. If however, I open a new session of Firefox rather than a new tab, I get my normal Google homepage.

For information about how to get rid of Yahoo see:
http://medicine-opera.com/2010/03/how-to-disable-yahoos-theft-of-firefoxs-open-a-new-tab/

Text measurement in Fireworks CS3

Hi all,
I'm designing a phone app, and a styleguide for the design,
which require all the elements to be pixel perfect and add up to
the screen dimension. There are 2 problems I run into is how to
measure text in Fireworks CS3:
1) Fireworks CS3 measure text in point, not pixel. I use an
online converter but it doesn't quite work. (For example, 17point =
22.666 pixel. Should I just round it up to 23?)
2) Web text is measured based on the em square, not the size
of the character itself. Is there a way to find out the em square
size in Fireworks? (I thought the blue bounding box when the text
is selected is the em square, but I tried taking screenshot and
measure it, and it turned out that it's not the case).
So, to sum it up, what procedure should I follow to measure
text in a pixel perfect design in Fireworks CS3? Thanks.

But what about the tutorial you did for Lynda.com where you inserted the google map within an i-frame? I am in a similar situation where I am trying to just insert a scrolling text box within my layout done within FWCS4 using similar layout. Just simple scrolling text box that's it.
I see what you are saying though. DW is the true HTML dev tool but I'm just having too much damn fun in FW and don't want to leave. :]
Kevin

SEO - how do search engines treat invisible text?

Hi,
I've created a website using Adobe Muse and to be able to include a lot of information in a small space, I've created an animated tabbed panel in Adobe Edge Animate.
I've started to go through the site to bump the SEO and I've realised that the text in the Edge animations are flattened - much like images. For search engines to recognise and use the text, I thought I could duplicate the text and position it behind the background image or turn the opacity to [0] so the user cannot see the text. Will search engines still recognise the text? And if it does am I damaging my site if they see it as spam or black hat tricks?
I've also split a lot of the headings up into letters so each one can be animated separately - would search engines read this as one word or a string of unattached letters? Again, I was thinking of creating a new text box with the word spelled out but with the opacity at [0]. Is this the best thing to do or are there better ways of doing this?
Thanks

No point in just slapping the text into a noscript tag. If there is no active JavaScript with matching content it is considered out of bounds just as well and search engines will not make anything of it. That being so, the answer is probably in your Edge file - you overdid it and instead of placing content natively in Muse using widgets crammed in everything there. So short of looking for fixes after the fact, you probably need to rethink your overall strategy and forego some fancy animations in favor of better searchability and user interaction.
Mylenium

Can you make a menu for the right-click search so that when I highlight text and search, I can choose which search engine to use?

If you Highlight text you can right-click on it to pull up a short menu. One option is "Search x search engine for 'highlighted text'" Previously, the search engine selected would be whichever search engine was selected on the search bar, so Google or Amazon.com, etc. Because you can no longer change that selection before you search, the search engine is set to your default. Was an annoyance before, but now it's just a hindrance.

Strongly recommend Context Search extension which will solve your problem
- https://addons.mozilla.org/en-US/firefox/addon/context-search/?src=search

Websites, Search Engines, Images & Text

I am told that search engines search for text in order to
list a site. My site is made up of mainly images so I want there to
be some text somewhere so search engines can find it. Is there a
way to put text on my site without having to redo the whole site? I
have put in a metatag description of the site and metatag list of
keywords
My site can be found here:
http://www.martingreshoff.co.uk/index.html
Many thanks for any help or advice

Select each image in turn, and use the alt field of the
Property inspector
to enter your attribute value.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"greshoff" <[email protected]> wrote in
message
news:eql9j3$edl$[email protected]..
> Thanks for your replies.
>
> I will reconsider redoing the website eventually in the
meantime fowdo I
> go
> about putting all of the text into the appropriate ALT
attributes in each
> image. I am new to dreamweaver so very simple step by
step instructions
> would
> be very much appreciated.
>
> Many thanks
>
quote:
Originally posted by:
Newsgroup User
> > My site is made up of mainly images so I want there
to be some text
> > somewhere
> > so search engines can find it. Issorting this there
a way to put text on
> > my
> > site without having to redo the whole site?
> >
> > My site can be found here:
http://www.martingreshoff.co.uk/index.html
> >
> > Many thanks for any help or advice
>
> You really should start over. Having all that text as an
image has several
> drawbacks:
>
> - it makes the site very slow
> - it's a pain to update
> - peopel can't resize the type if they need to
> - google can't see it.
>
> Now, you can leave it as-is, and put all of the text
into the appropriate
> ALT attributes in each image. That will help some, but
I'd really consider
> redoing the site.
>
> BTW, nice furniture! That library table is great.
>
> -Darrel
>
>
>
>
>
>

Creating a web page in Fireworks CS3

When I create a web page in Fireworks CS3 and export it the
page apears on the left side of the screan. I want it to be in the
center of the screan. How do I make it centered? I know that if I
open it in MS Front Page I can select page properties and center
the page in that program but how do I do it in Fireworks?

robweed7 wrote:
> Thanks, I am a beginner. And I understand the "(barf)"
with frontpage. Our
> church ordered frontpage for me to use, then I
discovered Adobe products, and
> can't afford it. I did get them to get me fireworks
though and as a beginner
> it is the coolest graphic design program I have used.
Look at NVu which is free and does a very decent job. I tried
it when it
was only in beta and it was promising although it couldn't
get me to
switch from Dreamweaver. I haven't used the final version but
I'm
certain it will give you better results than using Fireworks'
rigid and
easily breakable exported HTML and certainly a lot better
than FrontPage.
http://www.nvu.com/
> I have another question should you know the answere. As
a beginner I created
> the web page graphics in Fireworks then opened it in
Frontpage(barf) and
> finished the page. I uploaded it to my server and it
looks great in I-Explorer
> but is all chopped up in FireFox. If I publish it
straight from Fireworks it
> looks fine in FireFox. Why, and what do i do?
This is because, despite its flaws (and they are severe),
Fireworks'
exported code is less proprietary and more cross browser
compatible than
FrontPage's. I believed that later versions of FrontPage
created better
code but your story proves once again that no visual Web
"design"
application that falsely promise WYSIWYG is a substitute for
learning
the basics of Web design and development and getting your
hands dirty in
HTML and CSS code to understand how things work. Web design
is certainly
not only about the visuals and any designer who thinks he can
get away
with only creating Web sites visually without the need for a
working
knowledge of the underlying code is seriously delusional (not
saying
this is your case).
I do not mean you need to create your sites' code in NotePad
(which is
completely inefficient IMO). But you do need to understand
how things
work under the hood to make the right decisions in your
editor and be
able to fix problems. WYSIWYG is a pipe dream. Don't buy into
it.
Until you can afford something like Dreamweaver, NVu could
serve your
needs as it offers a source code view and apparently creates
decent code
out of the box. Learning to code HTML and CSS in a more text
based
application may be better for you in the long run if you are
serious
about learning this craft properly though. I'm sorry that I
cannot point
you to specific learning resources as it's been years since I
was a
beginner in this field and learned from too many sources. If
there is
one book I could recommend that I wish had been around when I
started
out in early 1996, it would be Zeldman's "Designing with Web
Standards".
This could be one of the smartest investment you make right
now:
http://tinyurl.com/2s2dhg
(direct link to book page on Amazon)
HTH!
Stéphane Bergeron
reach : connect : communicate
http://www.webfocusdesign.com
blog : tutorials : articles : gallery
http://www.pixelyzed.com

Creating a Photo Album through the Fireworks CS3

I'm trying to create myself a photo album in dreamweaver and
it says I need Fireworkds 4 or GREATER, so I click the download
trial button and I downloaded thhe Fireworks CS3, but dreamweaver
doesn't recognize it and keeps saying "I need a fireworks 4 or
greater"
Any help please, thanks.

quote:
Originally posted by:
Newsgroup User
Sounds like you're not using Dreamweaver CS3. It that's the
case, it doesn't
recognize a program written in it's future.
If you ARE using DW CS3, I can't really help without a little
more
information.
I have Dreamweaver 8. So what fireworks program would I need
for the photo album to work. Can I get a trial of Fireworks 4 or
some other fireworks program somewhere else??

Blurry Text using Fireworks CS3 version

I'm creating an ad for use in our local phone book yellow
pages using CS3 Fireworks. When I save it in .png or .jpg and print
it out it is very blurry and unacceptable. I made the mistake of
submitting an ad for something else thinking that the pros would be
able to print it out and it would be clear - and it printed
horrible. Why am I unable to print a clear .jpg file?

quote:
Originally posted by:
Champ3708
My canvas size is 288 x 360 pixels; my font sizes range from
9 - 15; I have the print quality set to BEST on a HP5280 and the
properties say the Max Resolution is 1200dpi. I'm really baffled
that this would happen in such a high end software such as
Fireworks CS3 version. How can anyone design anything using fonts
if this happens.
Yep, it's a tiny image. At 1200 dpi a 300-pixel image would
look good at about 1/4 inch. Maybe 1/2 inch, but it'll start to
look kinda blurry. Your printer may not have the same resolution as
the printer the phone book will be printed on, so you need to know
the print shop's recommendations. Then, do some math. If you know
the size in inches you want your advertisement to be, multiply
those dimensions by the dpi to get the dimensions in pixels to make
your Fireworks document. (Ignore the dpi settings in Fireworks.)
You could possibly get by with something half as big, but you
should ask the print shop for recommendations.
Better still is to use Illustrator or another vector drawing
program and submit scalable art in .ai or .eps format. But, again,
check with the print shop for guidelines.

Fireworks CS3 -- SPRY/HTML Slideshow

Using Windows XP Pro
I have tried many times to get the "Player - Black
(SPRY/HTML)" to work in Fireworks CS3 Slideshow creator.
All of the other players work except for this one.
However, it does work beautifully in Firefox -- just not in
Internet Explorer (latest version).
In IE, I get this error message:
"Exception caught while loading slideshow.xml: [object
Error]"
Can anyone help?
Thanks
Here is the top part of the XML code:

"folsombob" <[email protected]> wrote in
message
news:f5d1in$2oe$[email protected]..
> Thanks, Al ? for the information and the speedy reply.
>
> You are right ? it did work in IE online. Odd that
Firefox worked offline,
> though.
> Any ideas why?
Because of the xml file.
> Your ?Slideshow Magic? and the ?Image Gallery? at
Project Seven are VERY
> impressive.
Thanks.
> One of the things I am after is to be able to generate
the Flash (code)
> and
> then position the elements to fit into an existing
webpage.
>
> With Photoshop?s ?Web Galleries?, I have used its code
to create a
> customized
> template, but this is not an option with the two Flash
modules.
>
> I will likely be sticking with Plan B with HTML and
basic JavaScript
> ?swaps?,
> which works, but is not elegant.
>
> How flexible and subject to manipulation are the two
galleries at Project
> Seven?
Image Gallery Magic is constrained to a certain source code
order, but Slide
Show Magic is basically able to be molded into thousands of
different
scenarios and is limited only by one's imagination and
experience.
This is Slide Show Magic:
http://www.projectseven.com/products/galleries/ssm/ssm_03.htm
This is Slide Show Magic:
http://www.projectseven.com/products/galleries/ssm/tweaks/simpleface/
This is Slide Show Magic:
http://www.projectseven.com/products/galleries/ssm/tweaks/thumbs_bottom/
This too:
http://www.projectseven.com/products/galleries/ssm/tweaks/tools_bottom/
And this:
http://www.projectseven.com/products/galleries/ssm/tweaks/run_once/
And even this:
http://www.projectseven.com/products/staging/ssmpp/
Al Sparber - PVII
http://www.projectseven.com
Extending Dreamweaver - Nav Systems | Galleries | Widgets
Authors: "42nd Street: Mastering the Art of CSS Design"

Fireworks CS3 Font too Small

The font size in my Fireworks CS3 displays much smaller then that in Photoshop CS3 or MS Word by comparison.
For example in Fireworks I set the font Ariel 10pt 100% , it looks much smaller on the screen than the same in Photoshop.
If in Fireworks I set the font Ariel 14pt 100% it looks on the screen about the same size as Photoshop 10pt 100%
When I export the text as a .gif or .jpg the text is still smaller than the same files exported in Photoshop.
How do I correct this problem in Fireworks, so that the font size is the same as other applications?

I located what might be the preferences txt file:
C:\\Programs\Adobe\Adobe Fireworks CS3\Configuration\Installer\userPreferences.txt
This file is empty. I deleted it. I restarted Fireworks and closed it, but it did not create a new one.
I may have got the wrong file, but I am unable to locate anyother file that looks like :preferences"
Also in Fireworks at Edit-->Preferences I don't see anything the relates to font size, and I am just using the defaults here.
Here is what I see with 12pt Arial from Photoshop(blue) and Fireworks (black) at 400%
Thank you for your helpfull suggestions

Help converting Fireworks CS3 to Illustrator CS2 (vector file)

Hello,
I have a customer trying to send artwork that he created in Fireworks CS3 that I need to have in some sort of Vector file.
It appears that Fireworks CS3 can only save an AIv8 file. When doing this, it loses its shading and some (I believe) objet styles when opening the file in AI CS2.
Is there any insight on how to do this?
Thanks,
Josh.

quote:
Originally posted by:
artysmarty
The way I've converted large text blocks is to copy it from
Illustrator into MS Word and then from there to FreeHand. You may
lose your character styles doing this, but if you open your
Illustrator 8 file in FreeHand (with the broken text), delete all
the text 'bits' except one, highlight it and use then Paste
Special: Unformatted text - it should drop in with the correct
style. Then its only a matter of adjusting the text box size.
It's slightly long-winded, but it should work. Hope this
helps...!
How about that... I’ve been using this program for 18
years and never used “paste special”. Thanks!

Fireworks CS3 slow startup

Hi folks,
I installed CS3 Web Premium last week. Not had chance to play
with it a lot as yet but I have come across one irritation already:
When I launch Fireworks CS3 it takes between 10 and 20 seconds from
the program loading on screen to being able to either open a file
or create a new file. Clicking anywhere (e.g. menus) while waiting
gives a 'Not Responding' error message in the window title bar.
I was wondering if anyone else has had these problems or
knows how I might improve the startup responsiveness.
I'm running CS3 under Windows XP with all patches installed
on a Dell Precision 390 workstation with 4GB RAM.
Thanks in advance,
Nigel Hodgetts

Nigel Hodgetts wrote:
> McCaffee VirusScan Enterprise.
> 699 fonts
Ok... that's 2 strikes against you right there... ;-) The
only thing
worse is if you had Norton Antivirus but I guess they're both
about
equally crappy (seriously).
First thing I would try would be to exclude the entire
Fireworks
application folder from VirusScan's real time check and same
for its
application data folder in Documents and Settings. Ideally, I
would
ditch Mcaffee and get a good antivirus like AVG or NOD32.
Both are very
light on resources and will not slow down your system. AVG
has a free
version but NOD32 is about the best antivirus money can buy
(it's not
that expensive). I've been running it for over a year now and
it's the
best I tried. I needed the lightest resources hungry AV
possible as I'm
a musician and run resources intensive software that needs to
work well
in real time.
In your case, the number of fonts is probably a greater cause
of your
slow FW startup time than McAffee. You really should invest
in good font
management software. There are free solutions you can look up
on Google
but the one I prefer is Extensis Suitcase (version 11 came
out
recently). A cheaper and very good alternative is FontExpert
from
Proxima Software which had a new version release recently.
Ideally, you should never keep no more than about 50-100
fonts directly
installed in your Windows font folder and should activate and
deactivate
fonts on a "as needed" basis using font management software.
More than
about 300 installed fonts (less on some machines) will
definitely slow
down your graphic apps startup time and Fireworks is
especially
sensitive to that. I manage over 5000 fonts (yes, that's 5
thousand)
with Suitcase but I never have more than about 75-100 fonts
installed/activated at once.
Some font management software also come with plugins for
certain apps
that will automatically find and load missing fonts when
opening a
document. Unfortunately, none come with one for Fireworks
AFAIK but
FontExpert has one for Illustrator and Suitcase as plugins
for both
Illustrator and InDesign. Both companies say they'll probably
produce
more so, if your purchase either, enter official feature
requests for
missing font loader plugins for Fireworks.
Suitcase has the best font matching algorithm and goes a lot
deeper than
just the font name to find a match which is very important
for text
heavy layouts in apps like Illustrator and InDesign (which I
both use
regularly as well) because minute differences in
hinting/kerning can
cause unwanted text reflows if you load the wrong version of
a given font.
In any case, you should see significant load time
improvements if you
dramatically reduce the number of fonts you have installed in
your
windows/fonts folder and getting more efficient Antivirus
software will
help your entire system's performance.
HTH!
Stéphane Bergeron
reach : connect : communicate
http://www.webfocusdesign.com
blog : tutorials : articles : gallery
http://www.pixelyzed.com

Windows 7 and Fireworks CS3

Was anyone here able to run Fireworks CS3 flawlessly on
Windows 7? It has very strange behavior. I was able to get it run
for the first time after I have waited for more than hour to start
it. Then I activated it and was able to work with it without
problems. After restart it takes again forever to start. It looks
to me like there is no problem with fireworks but with some code
which is checking if the copy is legal and this is causing the
delay. I used FW very occasionally just to create some web
graphics, i bought FW8 and then i bought upgrade just to be able to
run it on windows vista. i really dont want to buy upgrade again to
use it on windows 7 just once a month. Any help appreciated.
update
Now it stopped working and I have got this message
Licensing for this product has stopped working.
You cannot use this product at this time. You must repair the
problem by uninstalling and then reinstalling this product or
contacting your IT administrator or Adobe customer support for
help.

On Windows 7? That's a beta product. If you want to use
Windows 7 you can expect problems as the purpose of the beta test
is to
find problems. CS3 works well on Vista. If you need to work
productively, use a released product, not a beta.
That said, I had the same error on Vista a couple of weeks
ago. Something hung in Fireworks and not only would Fireworks not
start, none of my other CS3 apps (on Vista) would start. I got the
same error message in each. It is something in the licensing
product that Adobe uses. I searched Google for the text of the
error message and found a KB article that eventually got things
working.
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401528
I had to run the utility all three times, and then keep on
going through the other steps of moving off file folders before my
apps started working again. It was frustrating for the to stop
working, like that, and I kept being disappointed at having to move
on to the next "if that didn't work, do this." But at least they're
working again!

Creating webpage in fireworks CS3. Is text searchable by search engines?

Similar Messages

Maybe you are looking for