Creating Win 7 64bit Recovery Disc for Satellite L500-19x?

My new Satellite L500 - 19X came pre-installed with Win 7 - 64 bit version.
Also included was a "Product Recovery Win 7 32 bit" disc
Within the packaging was a leaflet saying:
"If you plan to use the 64-bit version at a later stage, please create a _recovery medium_ prior to installing 32-bit Windows 7"
It then cautions me to create a "64 bit recovery medium.....ordering a 64-bit recovery medium is not free of charge"
The manual goes on at length about "_System Recovery Options_" As instructed in the manual I have made a "Repair Disc Windows 7 64-bit" Am I correct in saying that I do not or cannot have an actual Win 7 64-bit disc?
The leaflet says "a backup copy (of the Win 7 64-bit) is stored on the hard disk drive as a _recovery image_" So is this the actual Win 7-64-bit complete disc that I am after, and if so how do I get it?
The Toshiba documentation is not clear, and I believe rather contradicts itself?
I am confused! Anyone understand what's going on?
JohnF.

My confusion is because I don't understand what "recovery disc" means?!
On the "Dear Customer" flyer entitled "+Choosing your Windows 7 Architecture+" that came with the machine it states:-
"+A backup copy of the system (64 bit version) is stored on the hard disk drive as a recovery image+" This is what I don't understand, as I have already made a "+repair disc Win 7 64-bi+t" as well as having the "+Product recovery Win 7 - 32-bit" cd+" This cd seems to be the complete Windows disc, unless I am mistaken.
I guess what I am getting at is do I have complete Win 7 - 64-bit in case of total failure of the machine ? (I am asking the question because you often used to get a full Windows disc with a new computer in the old days)
Does this make it any clearer? Thanks for everyone's help
JohnF

Similar Messages

  • Re: Need Win 7 Recovery Disc for my Satellite Pro L750

    Hi all,
    Could someone tell me where to download or get a copy of the OEM Win 7 Recovery disc for my Satellite Pro L750? The laptop has a new HDD without a working recovery partition and I don't the recovery CD.
    Help Please.

    Yes of course you should make backup disks but this was my first personal laptop (unbelievable, right ? Never needed one before) and I wasn't aware i couldn't just make a recovery disk from any pc like I used to do for my desktop. The hdd is supposed to last for what, 5,000 hours ?
    I would be lucky to have had more than 1,000 hours on it. And no games play either; it had an easy life.
    As per Microsoft Forums I did a clean install of Windows 7 using a supposedly OEM setting download from Digital River (OEM in the 'channel' setting in the ei.efg file) but good old Toshiba must do something else in the hardware as slmgr /dli still states it's a 'retail' version so even though Microsoft would have given me a new product key (as to which i am entitled as i have purchased a licence when i bought the laptop), because the installation id states retail based, my genuine licence key number from the bottom of the laptop does not register as genuine when they check.
    I tried my desktop pc oem windows 7 installation disk that I got with the pc (now there's a whacky idea, providing a disk with the purchase...) and no luck there either. The laptop was still locked to its own licence key and retail version. I'm guessing even if i bought a new retail windows copy, it still wouldn't work !
    I still think $66 is far too much to pay to get the disks. I've already paid for the windows licence, But what choice has toshiba left me, other than to pay them their blood money.
    I may be a slow learner, but I do learn. I will never buy a Toshiba laptop, or other Toshiba product again. Sure, other companies will have the same licensing setup, but I'm not angry at them !

  • Cannot use created recovery discs for Satellite A350-134

    Emm I really hope you can help me.
    The Notebook said that you have to create the Recovery Disk by yourself and thats what I did ( on 2 Cds)
    So i wanted to reinstall my Notebook and put in the first cd and booted from CD. So i came into the Menu.
    Then after a while it asked me to put in the second CD and I did it. Then it said there was a error copying the last 2 files needed.
    So now i cant create the Recovery Disk again because I already started the reinstalling. now i have a few questions
    What can i do generally ? Because I really dont want to buy for 35 euros a new Recovery Disk :S
    I thank everyone who helps me :D

    If you want to have factory settings you must install recovery image from recovery disc.
    If your discs dont work you must use original Toshiba recovery disc.
    My opinion is that you should install Win7 32bit on this machine. I do it on friends A350 and it runs perfectly.

  • How to create Rescue and Recovery disc for Windows Vista Home Basic with G530 Lenovo Laptop?

    Hi All,
    I have purchased G530 Lenovo laptop 2 weeks back.
    I coudn't find installation/recovery discs in my laptop box.
    I went across the forums and came to know that it is not available now-a-days as it was coming previously.
    So, anybody can help me, how to create a recovery disc?
    This is needed when I format my laptop.
    Thanks in advance.
    Regards,
    Umesh.

    Click on what used to be the "Start" button and search for "create" or "recovery". It took me a while to find it but it is there.
    Use a cd for the first disc and 2 DVD's for the other discs.
    T60 2623-D7U, 3 GB Ram. Dual boot XP and Linux Mint.
    T400 2765-T7U Windows 7
    Registered Linux User #160145
    FYI: I am not employed by Lenovo

  • Making Recovery disc for Satellite A300-16I

    I recently purchased this laptop and I get this reminder to make a recovery disc, but the link to the program doesn't work.
    When I found the recovery disc program in its original folder it still refused to open.
    My laptop just 'thinks' for a moment and then pretend nothing has happened.
    Does anyone have a solution for me?
    Maybe I could download a working version of this program...?

    Hi
    From my own experience after a third system restart a recovery reminder appear saying you need to create a Recovery DVD.
    You said you found the recovery disc program in the original folder well, as far as I know there is a TOSHIBA Recovery Disc Creator shortcut on the desktop.
    Use this shortcut to star this application.
    If this is not possible then you could try to recover the notebook again and then to create the recovery CD.
    To start the recovery process you have to press F8 button immediately after system start.
    Then choose the option called Repair your Computer and follow the instruction on the screen.
    Bye

  • Need Win 7 recovery discs for new hard drive

    I am not sure which Windows 7 Operating system my laptop had, but I need the recovery discs to put Windows 7 back on my HP dv6-6167cl notebook. 
    My original issue was that my notebook was unable to restore or anything on its own.  After calling HP support and performing a guided diagnostics test, it was determined that my hard drive was bad.  I purchased a new hard drive and replaced it, but need to get Windows 7 back on it.
    Thanks!
    This question was solved.
    View Solution.

    Hi,
    Your notebook originally shipped with Windows 7 Home Premium 64bit - you can order a replacement set of Recovery Media from the link on your Product Page below.
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5118...
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Help to creating a Toshiba recovery disc for portege r200

    Hi people, I have lost my CD´s from my computer. And I need to re-install XP on my computer. I need help to creating a disc with XP for install on my computer r200. every time I tray to install XP I get erro " the time start format my disk, the instalion stop and say to check the hard drive" 

    Better to acquire the recovery discs. Which Portege R200? What country?
    -Jerry

  • Repair using Recovery Disc for Satellite A100

    Is it possible to do a *Repair* on my Toshiba Satellite A100-049 using the Recovery Disc that came with the laptop
    Regards

    Hi Dr Lamp,
    It started about a week ago,when I think I had problems with the Malware /Virus "Fake Alert" where a meesage kept coming up saying I needed to repair or words to the effect. I then lost my desktop and my folders were empty in the start menu, and the screen was black.
    I ran McaFee antivirus, Malwarebytes and Super AntiSpyware. I then ran Unhide and rKill. I got the desktop back with a couple of Word documents that would not open but the folders in the start menu where either ok files missing or empty.
    I now keep getting redirected when searching but not always, also when I switch the laptop on Photshop opens up as though it is trying to open a file up,there is a message appears Photshop cannot open this kind of document.
    The only program I have set to open on start up is McAfee.
    I have tried a few system restores with the same result.
    After system restore the laptop seems to start up ok, but the next time it is started Photoshop opens again.
    I seem to be going round in circles, I really don't want to use the Restore option if at al possible.

  • Re: Where can I get a recovery disc for Satellite P105-S921

    I made the mistake of buying my laptop second hand and it has so many problems i cant use it at all
    I dont have a recovery disc and thought that maybe that would fix my problems
    I am not very computer litterate
    thanks

    Hi!
    You can create the recovery disks with the Toshiba Recovery Disc Creator. Normally it is preinstalled on the laptop.
    If you are not able to burn it, you can order a new disk here:
    https://backupmedia.toshiba.eu/maintenance.aspx
    Bye

  • Recovery disc for Satellite A300D-125

    Hi
    It's request for all of You. Please, help me somebody.
    I have Toshiba A300D-125, when I bought it I forgot make backup CD. Now I format my hard drive and I make new windows. Problem is, I don't have all this programs what was when system it was new. Maybe somebody, who have same laptop have a backup cd (i'm sure somebody have) can share with me this CD.
    Please, You can make image of this and upload somewhere in internet.
    I'll be very grateful. Thanks

    Hello
    Akuma is right. You can order original Toshiba recovery DVD under this address. Using it you will have factory settings again.
    Other possibility for you is to install your own Vista and use all drivers, tools and utilities from Toshiba support page. On this way you can install other Vista version like Business or Ultimate.

  • Creating Recovery Discs for Win 7 - When Win7 Pro 64 is Preloaded from Win 8.1 Dowgrade Rights ?

    Novice questions:
    1. What is the proper procedure for:
    Creating Recovery Discs for Win 7 Pro 64 - When Win 7 Pro 64 is "Preloaded by Lenovo from Win 8.1 Dowgrade Rights" ???
    2.  Will I then be able to use these Win 7 pro 64 - Recovery discs in the future should I need to "clean install Win7 Por 64 on the computer again ?
    3.  Also, If I use an Imaging Pgn like - Paragon Backup and recovery will I be able to reload win7 image and have win7 activated automatically just be restoring the Paragon backup image ? 
    JosephB
    T61 6459-CTO - 15.4 WXGA - XP SP3
    Solved!
    Go to Solution.

    JosephB wrote:
    ... BTW, when you perform the - Weekly "Macrium - Image Backups", do you backup to a local USB cable connected External Usb Drive or wireless wifi connected to a NAS Drive ?
    I have a Verbatim 2TB external USB 3.0 drive plugged into the PC.  It's used for both my weekly image backups as well as my nightly data backups.  I have one of these on EACH machine in my environment, for backups local to that machine.  I also use them on machines I build for friends and family, as everybody needs a backup system for "priceless data".
    Actually, to be a bit more complete, my "data" backups consists of two parts: (1) 1st-of-the-month FULL backups of all my data, and (2) nightly INCREMENTAL backups which handles anything created/changed in the past 24 hours.  Thus a "backup set" consists of the beginning FULL backup coupled with the ever-growing throughout-the-month set of nightly INCREMENTAL backups.
    NovaBACKUP can handle all of this if you need to recover something, so you yourself don't need to know exactly which backup file your file is located on.  You simply identify the folder/file(s) you wish to recover, and the AS-OF date you want for that file (with "as of the latest version available" being the default).  If you want to recover an older version than the most current version, you simply slide a GUI time-slider backwards until you arrive at the as-of date you desire.  NovaBACKUP then figures out where the most current version is AS OF THE DESIRED DATE, and accesses that one-or-more backup files in order to complete your task.
    I retain multiple "backup sets" (going back 4 complete months), so I can recover any folder/file(s) I had available on any specific night during the past 4 months.  Most commonly of course it's typically "get me the most current version available as of last night", but just in case that version is corrupt or I truly want an earlier version, I can get it easily.

  • Can not create recovery discs on satellite C875D-S7330

    Can not create recovery discs on satellite C875D-S7330. Drive runs and appears to be doing it thing, then aborts saying it has error to check disc for scratch or dust on media. Error code: OEO1B5-26-2AO3OC 00 . Tried 3 new discs all same results. Tried a 4th disc trying to continue on with disc 2 of recovery discs, got another error on this one. Error code: 020150-20-00000000.
      Anyone have a fix for this? Had this machine less than 24hrs.
    Thanks
    Don B.

    Personally, I would get a 16gig USB thumb drive and put your recovery on it.  It eliminates having to swap disks during recovery and it's easy to store.  I've used mine several times and it's worked perfectly every time.
    L875D-S7232 (Win 8.1)

  • Create Recovery Disc For Windows 7

    Hi,
    I have HP Pavillion p6310y desktop with Windows 7 (not sure 32 or 64 or whatever)
    My computer got virus infection. These virus are located in very low level of hard drive. Also there are other virus. Virus supporters want to remove these virus, but they are afraid my computer may be unoperable due to virus location level. They ask me to get rescue or recovery disc for the computer
    Now I searched to create rescue disc via link http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c01867124&tmp_task=solveCategory&lc=en&dlc=en&cc​... , but I couldn't find "recovery manager". I do see recovery via control panel, but couldn't find a way to bring a image like link shown. 
    Anyone can help me to create the recovery or rescue disc for the hp?
    Thanks.

    OK... time to kill two stones with one bird...
    Q: How I know my computer is window 7 32-bit or 64-bit?
    A: I previously posted this "Windows 7 64b A1NAv6PrA1 + Supp 7 Recovery Kit" which states 64bit. Additionally, here is a link to your computer's specs... click on the "+" under "Software" at the bottom of the page.
    Q: If virus is located in lower level of hard drive or computer, then try to remove them, it is likely to damage the computer and hard drive?
    A: A virus, almost any virus is incapable of causing physical damage to your computer. The only damage they cause is to your data, installed programs, OS, and maybe your wallet. All it takes to remove most viruses is to format the drive.
    Frank
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Satellite U500-17E - Need Windows 7 64bit recovery disc

    HI,
    I am looking for someone who is able to copy for me *Windows 7 64bit Home Premium recovery disc from partition for Toshiba Satellite U500-17E* (Czech Language - or English). I resized partition and deleted windows 7 recovery disc and now I need it for reinstall due to disc problems. I don't want buy copy because I bought toshiba satellite with windows 7 and why pay twice for same thing.
    Please let me know if you are able to copy recovery disc for me and put it to some web page which I can download it from. You can make a password to prevent abuse.
    I can give you a small donation over paypal.
    Martin

    It is not understandable for me why you have ignored Toshibas reminder about recovery DVD creation but it is definitely your mistake and now you have this stupid problem.
    Maybe somebody can help you with this but you should leave your e-mail address here.
    By the way: if you are ready to give some donation then you can also pay this 30 euro and order original disc for your notebook model.
    If you will change your mind here is address for recovery disc order - https://backupmedia.toshiba.eu/landing.aspx

  • How can I create the recovery discs for my AIO computer? (For Windows 7 systems)

    Q.: How can I create the recovery discs for my MSI laptop/AIO computer? (For Windows 7 systems)
    A.:
    1. Locate the "MSI BurnRecovery" shortcut on your desktop or start menu. Run this program. (Note: If UAC is enabled, press "Yes" to allow the program to run.
    2. MSI BurnRecovery will prepare the files. This process may take a few minutes.
    3. Click on "Next" to continue.
    4. Click on "Advanced".
    5. Click on "Create an ISO file for the recovery disc".
    6. Select the destination where you want to create the ISO files. (Default is the D: drive)
    7. The program will now create the ISO files. This process may take up to 20 minutes.
    8. Click on "Finish". Make sure the box is unchecked.
    9. Browse to the location of the ISO files. Double-click the recovery_dvd file. (Note: Depending on your system, you will have 1-3 recovery_dvd files)
    10. Insert a blank DVD (If the AutoPlay window pops-up, close it). Click on "Burn". It is also recommended to check the box to verify disc after burning.
    11. After burn is complete, click on "Close".
    12. Double-click the recovery_dvd2 file.
    13. Insert a blank DVD (If the AutoPlay window pops-up, close it). Click on "Burn". It is also recommended to check the box to verify disc after burning.
    14. After burn is complete, click on "Close". Recovery disc creation is now complete. (You can also delete the ISO files, but it is recommended to keep them)

    Hi,
    You can order a replacement set of Recovery Discs using the link below.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
    If you have any problem with this link, order them directly from HP.
    If you live in the US, contact HP Here.
    If you are in another part of the world, start Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for

  • Sorting of PO Line Attachments in PO Output for Communication

    Hi, I have created a RTF template to generate PDF output of the "PO Output for Communication" program. The Short text and Long Text attachments of PO Line are appearing correctly but not in the same sequence as user has entered in the Purchase Order.

  • How to change the sender's name/email-id in the scheduled report

    Hi, We have SCOM 2007 R2. In the Reporting tab (SCOM Console), we have some scheduled reports. I need to change the sender's name/email-id in a scheduled report. When we receive the report through email, receiving with the person's name who moved out

  • LAP 1242AG Can't use as a repeater

    i bought 2 aironet LAP 1242AG AP's. first i didn't know i had to have a cisco controller to configure/use these. so i flashed the OS to ISO the newest one. so now i can go to the GUI and configure. this is that i need these 2 AP's to do. there for a

  • Problems with the Internet

    I upgraded to mountain lion a few weeks ago and my mac isnt letting me go on certain sites, like youtube or yahoo. Neither site is blocked. When i try to go to them, i just get a white screen. Both sites allow me on but i have to type in yahoo.com/ma

  • CL_CRM_EMAIL_UTILITY_BASE=====CP Error : NOT_FOUND

    Hi all, I've migrated CRM 5.0 dev machine from IBM AIX to HP UX . Now when the users are unable to view their Emails through web client (CRMIC) .I've already applied the note 968808 which says ,Short Dump RABAX state occurs in method GET_MAIL_DATA_FR