Creating Windows partition
Hello all,
On an older MacBookPro 17" (more than 4 years) i have a 200 GB intern HDD used only with Leopard (so far !)
I ordered a new one, but I would like to keep my MacBookPro (it's still working fin) but adding a new Windows partition.
I don't know how to proceed, and followed the HELP option.
I created one 120 GB FAT32 partition, (Leopard is still safe)
Started Utilities > Put the original Windows 7 DVD > click Continue > enter PW > and...
System tell me=
The Windows activitation software is not disposable (I translated the French version, sry if it's not exact !)
I'm afraid i mae some mistake and wonder if someone can help me to follow the correct procedure ?
How to split 200 GB with a Windows partition ?
How to proceed after having formatted ?
Thnaks in advance for your help.
Best regards,
Jean
There is BootCamp software that does it for you, but it creates a FAT32 partition which you use the Windows 7 disk to change to NTFS, then you can install it.
Also you need to read the BootCamp instructions because you have to install drivers from Apple too.
French
http://www.titanium.free.fr/viewforum.php?f=2
Similar Messages
-
Can't create Windows partition with BootCamp
When I try to create Windows partition with BootCamp I get the same error, no matter what size the partition is set to : "This disk cannot be partitioned because some files cannot be moved" and then keeps giving instructions about formatting the disk as a single partition (after performing a full backup I assume), and then try using BootCamp again.
Does that mean I have to erase and reinstall OS X to be able to do that ? Cause I just did that and I have the same problem. I'm not reinstalling again, it took me an entire day to reinstall all my softwares and run all the updates... Plus it reminds me too much of my Windows days... I'm not supposed to do that on a Mac anyway
Back to the topic... are there any services that need to be stopped during partitioning ? Any software installed that could prevent that ?
What could cause this problem ?Weird thing is I had no trouble making a partition using BootCamp before I restored OS X, and I had the same softwares installed... or maybe I did that before I installed some of them... Could this be related to any software I have installed ?
And judging by your suggestions I would say that the "iDefrag" option is the only way out of the two to make this work. Sounds a little extreme if you ask me... What happens on the first attempt of creating the partition that would make me choose backing up and/or defragmenting ? ... You don't have to answer that if it's too complicated...
Same thing happened on my other MBP... so as far as I'm concerned, I can only restore one more time and try to make the partition right after first startup. If that fails, then it means it could have been software related... Or maybe restore again, install one more software/utility I use and try partitioning again... and again, and again, until it fails...that way I'll know what caused it...
Just kidding...
Thank you for the suggestions anyway ! -
Can't create Windows partition!
Hello,
I'm trying to create a new partition to install Windows 7 on, but I am unable to do so.
At first I tried to do this with Boot Camp Assistant, but it didn't work.
Then I tried to create a FAT partition with Disk Utility, which didn't work either.
So I verified and repaired the disk, tried to create the partition again, yet it still didn't work.
I verified and repaired the disk and tried to create the partition while running the OS, in Safe Mode and from the Mac OSX Install DVD.
Neither of them worked.
I noticed while running the OS, the info of the HD said the capacity is 749.81 GB, while checking that from the Mac OSX Install DVD it only says about 700 GB (I mentioned 698.6 GB).
Strange..
It might also be important to mention that I recently (2 days ago) I installed a new HD: Western Digital Scorpio Black 750 GB, and today I swapped my 2x 2GB RAM for 2x 4GB RAM (Samsung).
On my previous HD, the Fujitsu 250GB, this proces was no problem at all. I installed W7 on that drive just a week ago.
I made a clone of the Fujitsu HD and "back-upped" it to my new WD HD. The W7 partition on the Fujitsu HD was 50GB, which is the difference in capacity mentioned above. I'm not sure if there's a link here..
I've got a MacBook Pro from mid 2009.
I'm not sure what to do next... I'm stuck!
Any help is greatly appreciated!Weird thing is I had no trouble making a partition using BootCamp before I restored OS X, and I had the same softwares installed... or maybe I did that before I installed some of them... Could this be related to any software I have installed ?
And judging by your suggestions I would say that the "iDefrag" option is the only way out of the two to make this work. Sounds a little extreme if you ask me... What happens on the first attempt of creating the partition that would make me choose backing up and/or defragmenting ? ... You don't have to answer that if it's too complicated...
Same thing happened on my other MBP... so as far as I'm concerned, I can only restore one more time and try to make the partition right after first startup. If that fails, then it means it could have been software related... Or maybe restore again, install one more software/utility I use and try partitioning again... and again, and again, until it fails...that way I'll know what caused it...
Just kidding...
Thank you for the suggestions anyway ! -
I get a black screen after installing the bootcamp drivers on my newly created windows partition?
I am attempting to install windows 7 on my mid 2007 core 2 extreme iMac. I open bootcamp and do all of the steps except the usb flash drive drivers from apple because the server always fails to load. After restarting, I install windows 7 to the bootcamp partition, and the screen goes black during the "Completing Installation." I wait about an hour before shutting down and rebooting into my Mac partition. I use paragon ntfs for mac and go to the drivers folder and delete the atikmdag.sys file and restart. Booting into the windows partition, I get the error that says "Windows installation has failed because the system unexpectedly restarted. Click ok to restart and redo installation" or something along those lines. Instead of pressing ok, I press shift+f10 and open regedit. After opening regedit, I go into some registry file for the setup (I don't remember where this is located, although I can find it if needed), and I change a value from 3 to 1. After doing this and restarting, It boots regularly with a super low res screen but it boots without problem. I go to the apple website and download the appropriate bootcamp support software and install on my windows partition. After restarting, the screen is black again. I assume this is another video driver problem again because the black screen seems to always be video driver problems; however, its odd that the bootcamp support software would give me an incorrect video driver as it is directly from apple. Would this be the problem or does anyone know a fix? Any help is appreciated.
Cheers,
AdamIf you bought your RAM at a place that also sells PC RAM you may have gotten mislabelled RAM. PCs can handle different RAM speeds so they’ll often label higher speed RAM as a lower speed rather than make two different speeds of RAM. But Macs are much more picky. They require a RAM stick to be exactly 667mhz not 675mhz or 800mhz. The way to tell is to put one of your old RAM sticks in and it will force the new RAM to run at the correct speed.
This is from one review of PNY RAM:
"These modules are actually 800Mhz. PNY no longer makes or sells 667Mhz modules. Not all computers that require 667Mhz are compatible with 2 800Mhz modules. They refuse to down clock properly. This is especially true with a number of Core 2 Duo MacBooks. Spoke to PNY support, they flat out told me that yes, they sell 800Mhz modules in 667Mhz packaging. If you RMA a module that is 667Mhz (or supposed to be 667Mhz) they will replace it with an 800Mhz module as they no longer have any 667Mhz SODIMMs, not even for RMA replacement!"
These are good online stores for Mac compatible RAM
OWC http://eshop.macsales.com/shop/memory/MacBook/DDR2/ - They offer Mac tested RAM at very good prices.
Crucial Memory http://www.crucial.com/ - good place to buy RAM from all over the world. They also have an excellent memory selector that allows you to choose memory based on your computer's model
Data Memory Systems http://www.datamemorysystems.com/apple-memory.asp - another good, cheap place to buying RAM if you live in the U.S. -
The disk space disappears after bootcamp failed in deleting the windows partition.
Hardware: Macbook Pro 700
OS: Lion v10.7
1. I installed Windows 7 in my mac. The space of Windows partition is 80G.
2. Some dlls of Windows will always disappear and at last the Windows cannot be started successfully.
3. Yesterday I updated Lion and started the bootcamp to remove the Windows partition. But bootcamp throwed an error(I forget what the error is).
4. I started bootcamp again to try to remove the Windows partition, but there is only create Windows partition in the options.
5. I started the Disk Utilities and verified the disk. The reported result was that there were some errors in disk.
6. So I restarted the machine and pressed COMMAND+R and entered the Disk Utilities to repair the disk.
7. After repairing the disk, there are no errors in disk now. But 80G space disappears.
Now my whole disk is still 320G, but the mac partition is 238G.
How can I repair it? Please help me.
Some logs in system:
Mar 8 04:54:44 ko-hitoshimatoMacBook-Pro com.apple.kextd[10]: Error reconsidering volume /Volumes/BOOTCAMP.
Mar 8 04:57:25 ko-hitoshimatoMacBook-Pro fseventsd[18]: log dir: /Volumes/BOOTCAMP/.fseventsd getting new uuid: 399DDE3E-37D7-43A8-8BD1-049EF76C803FFigured it out myself! I didn't have any ports open on my MBP for LAN access....
Bob -
As made clear in the title:
I'm trying to create a Windows partition using Boot Camp. An error comes up telling me that I need to reformat my current partition(s) into one single partition. However, it's already formatted in the correct format, and is already a single partition.
My computer recently had a kernel panic, which apparently the corruption was in the system and needed to be erased and re-installed. I have a complete back-up using an external hard drive, and I am definitely not willing to do another one of those to reformat a partition that is already singular. I restarted the computer after ejecting my back-up, and after turning off time machine (thinking that boot camp was recognizing it as a secondary partition), however the error still occurs.
Is there any way to get around this?diskutil list:
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *750.2 GB disk0
1: EFI 209.7 MB disk0s1
2: Apple_HFS Macintosh HD 749.3 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: Windows7 *2.9 GB disk1
diskutil cs list:
No CoreStorage logical volume groups found
mount:
/dev/disk0s2 on / (hfs, local, journaled)
devfs on /dev (devfs, local, nobrowse)
map -hosts on /net (autofs, nosuid, automounted, nobrowse)
map auto_home on /home (autofs, automounted, nobrowse)
/dev/disk1 on /Volumes/Windows7 (udf, local, nodev, nosuid, read-only, noowners)
From my very basic knowledge - it still looks as if there is only one partition (not including the windows 7 CD necessary to install the windows partition). -
Hi Everyone,
Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro.
The bootcamp drivers have been downloaded from apple's website. Filename: BootCamp5.0.5033
I have a iMac 27" late 2013 model.
NOTE: I have downloaded the drivers manually from apples support site as the bootcamp wizard fails third of the way through the download.
Appreciate any assistance.
Regards,
asdutoitThere is a missing point in this thread, and it is that the Boot Camp drivers for the Late 2013 iMac can only be downloaded from Boot Camp Assistant. The Boot Camp drivers available in the Apple site are not compatible with that iMac.
Delete the Boot Camp drivers from the USB drive, open Boot Camp Assistant and try to download the Boot Camp drivers again. If you get a message telling you that they could not be downloaded, I would try reinstalling OS X through OS X Recovery, by holding down Command and R keys while your Mac is starting up -
Can't create a windows partition with bootcamp
Hi
i have a MacBook Air. Standard, no changes from my side.
I have the newest Lion update and BootCamp in Version 4.
So, now i want to install Windows 7 64 Bit.
I start BootCamp Assistant.
The first point, is grey. i can't activate it. This point is to create a Windows 7 Install Disk
Second Point is to download the drivers and so on. This is working. I have the stuff on a usb stick.
Third Point is to create/install Windows 7. So, i have the posibility to decide how big i want my windows partition. 20-32 GB.
when i click on create button. There comes a pop up "Installtions CD is not found"
I have a bootable Windows 7 USB Stick (8 GB - Fat32). The Stick works. When i boot with refit from the stick, the Windows 7 installation starts. But without a partition ... not so good :-)
So, what can i do now? BootCamp don`t want the Windows USB Stick.
I need help :-)
Thanksundefiniert wrote:
Hi
i have a MacBook Air. Standard, no changes from my side.
I have the newest Lion update and BootCamp in Version 4.
So, now i want to install Windows 7 64 Bit.
I start BootCamp Assistant.
The first point, is grey. i can't activate it. This point is to create a Windows 7 Install Disk
Second Point is to download the drivers and so on. This is working. I have the stuff on a usb stick.
Third Point is to create/install Windows 7. So, i have the posibility to decide how big i want my windows partition. 20-32 GB.
when i click on create button. There comes a pop up "Installtions CD is not found"
I have a bootable Windows 7 USB Stick (8 GB - Fat32). The Stick works. When i boot with refit from the stick, the Windows 7 installation starts. But without a partition ... not so good :-)
So, what can i do now? BootCamp don`t want the Windows USB Stick.
I need help :-)
Thanks
You will need a windows install DVD, and 50 to 60G partition. -
How to create extra partitions for windows 7 after installing boot camp
hello
i am pretty new at imac so bare with me and i really need help.
IMAC
OS X version 10.9.5 ( i think its os X mavericks ??)
iMac 21. inch , Late 2013
iMac model identifier iMac 14,1
i installed boot camp windows 7 and it works perfectly, after i tried to create two partition using disk utility for windows 7 (ms-dos) format because i really want to separate my files on other partition instead of everything on Boot Camp drive. after i restart choosing windows OS i cannot go back to windows 7.
i hold option on the keyboard but does not show window 7 so i went back to Apple ox s , found my boot camp hd on the desktop with files in it. checked boot camp assistance showing
" The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows. "
i read alot of article about but i don't seem to understand much about
i understand alot of people created these kind of topics
please if someone can help me solve this problem again
i only want an apple os , boot camp for windows 7 and 2 extra partitions for storage , my hard drive is 1TB
thank youLast login: Mon Feb 16 16:11:46 on console
YLFs-iMac:~ ylf$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_HFS Macintosh HD 999.3 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s4
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: FDisk_partition_scheme *8.0 GB disk1
1: DOS_FAT_32 WININSTALL 8.0 GB disk1s1
YLFs-iMac:~ ylf$ diskutil cs list
No CoreStorage logical volume groups found
YLFs-iMac:~ ylf$ sudo gpt -vv -r show /dev/disk0
Password:
gpt show: /dev/disk0: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: /dev/disk0: PMBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 1953525167
start size index contents
0 1 PMBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 1951845952 2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
1952255592 1269536 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1953525128 7
1953525135 32 Sec GPT table
1953525167 1 Sec GPT header
YLFs-iMac:~ ylf$
Also i do not have boot camp installed yet because like i said, it messed up my boot camp after i created the partition thats why i removed boot camp, right now i only have APPLE OS -
I want to have an exFAT parition in addition to the Mac OS X and Windows partition. If I create it before running BootCamp, BootCamp wants me to delete it before continuing. If I create it in either Windows or Mac OS X after running BootCamp and installing both OSes, I can no longer dual boot. What is the magic sequence to get this to work?
I've got the same quandary.
After upgrading my hard drive to a Momentus XT Hybrid and doing a clean install of Mountain Lion, I was surprised that I couldn't format partitions separately and then restore from my clone of the old Windows 7 Partition. I found that I had to use the BootCamp Assistant to manage it all, which essentially meant getting rid of the partitions and starting again...
I now can't get my Windows / BootCamp partition to boot, after adding a 3rd, ExFat, partition, when it was working perfectly fine before. I just get a lot of dos booting failures and a final message that "No boot device is available, press Enter to continue".
See the attached message, that I get when trying to boot the bootcamp partition, through Parallels 7; which also worked perfectly fine before.
Be good to know if there is a work around this in Mountain Lion as, if not, I'm thinking I might skip Bootcamp altogether and just install a machine drive via Parallels. As suggested here:
http://forums.macrumors.com/showthread.php?t=1420754
I might even keep the virtual windows machine on a separate hard drive and then I'll have no need for the ExFat partitions altogether as that was designated for sharing between Windows and Mac. -
i created a windows partition that was too small and cant install windows... how can I boot on my mac drive to correct this... my computer is defaulting to the windows partion... tried f1 f7 f12... Help
Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the "OPTION" key.
3. Release the key when the boot manager appears.
4. Select your OS X disk.
5. Click on the arrow button below the icon. -
Boot Camp can't create a Windows partition
Hello,
I'm trying to create a new partition to install Windows 7 on, but I am unable to do so.
At first I tried to do this with Boot Camp Assistant, but it didn't work.
Then I tried to create a FAT partition with Disk Utility, which didn't work either.
So I verified and repaired the disk, tried to create the partition again, yet it still didn't work.
I verified and repaired the disk and tried to create the partition while running the OS, in Safe Mode and from the Mac OSX Install DVD.
Neither of them worked.
I noticed while running the OS, the info of the HD said the capacity is 749.81 GB, while checking that from the Mac OSX Install DVD it only says about 700 GB (I mentioned 698.6 GB).
Strange..
It might also be important to mention that I recently (2 days ago) I installed a new HD: Western Digital Scorpio Black 750 GB, and today I swapped my 2x 2GB RAM for 2x 4GB RAM (Samsung).
On my previous HD, the Fujitsu 250GB, this proces was no problem at all. I installed W7 on that drive just a week ago.
I made a clone of the Fujitsu HD and "back-upped" it to my new WD HD. The W7 partition on the Fujitsu HD was 50GB, which is the difference in capacity mentioned above. I'm not sure if there's a link here..
I've got a MacBook Pro from mid 2009.
I'm not sure what to do next... I'm stuck!
Any help is greatly appreciated!Did you do an upgrade to Leopard? If so, some files may be scattered over your HD, making it impossible for BC to find a single contiguous area on the drive.
Also, be sure you did not have eDisk installed - that's the thing from the TechTools disk that comes with AppleCare.
This is not an uncommon problem. It's not just you.
If you have a complete backup of Leopard, you can use the DU to make a single partition. You may be lucky and not lose any data, but backup anwyay.
In DU, repair the disk, if necessary and verify/repair permissions.
Once you have done this try again.
If BC still fails, you will need to erase the HD and then copy everything back from the backup.
I always suggest a bootable clone for the backup and be sure to test it first to see it works. -
Can't create a windows partition
I'm trying to create a windows partition through bootcamp but it refuses to do so because I'm guessing that it's scanning permission that need to be repaired. The message states that I need to run disk utility.
The problem though is, I can't do anything about the permissions cause of a known "bug" (??) on leopard.
It states 3-4 permission need repairing but they can't be repaired. Others have that issue but they probably had windows installed before this happening.
here is an image of disk utility.
http://idisk.mac.com/dkatsafouros/Public/permissions.jpgAlright I solved the problem. It was a repair disk and a repair permissions check.
Everything is fine now -
boot camp 5.0.1 aways crash when i try to create a partition for windows. My mac is new MBP retina.Any one can help me?
boot camp 5.0.1 aways crash when i try to create a partition for windows. My mac is new MBP retina.Any one can help me?
-
If i create a partition for Windows 7, and boot up in Windows using Boot Camp, can I still access the files from the Mac partition (Photo's Music etc.)
JDFitch wrote:
Ok Great,
Will installing Boot Camp drivers allow me to both read and write to the OS X Volume from windows?
This is important as if it will it means i can make the windows partition a lot smaller and keep all my files on the OS X partition which would be preferable.
Jon
No, OSX will be read only (from Windows) and vice versa. (you can install 3rd party utilities on either or both partitions, to make read/write possible)
Maybe you are looking for
-
The story is, I had my desktop and android tablet synced, with a significant amount of bookmarks in the desktop PC. Then my desktop hard drive was reformatted and Win XP reinstalled. I had not taken note of the recovery key previously (nor backed up
-
LMS 3.2(solaris 10) - User Tracking: again "ogs_server_urn" Not found! errors
LMS 3.2 on a solaris 10 server that had problems with ctm_config.txt in the past (https://supportforums.cisco.com/thread/2033941) now again has problems with the device selctor in UT. There are FATAL errors of the below type logged to CampusOGSServer
-
Hi, I have a problem with my MacBook Pro (early 2010). I tried restarting the system to install an OSX update (I was prompted to), but on the restart it froze on the grayish/white screen with the apple icon and spinning gears. So far I've been able t
-
How to disable onboard video chip (ms6337)
Hi all. My mainboard is MS6337(815Epro , bios version:1.4) I've bought a new videocard ,so I want to disable the onboard video chip. Thanks for any help .
-
WRT54G2 Cannot connect to Internet in Vista
I'm having WRT54G2 wireles router, but cannot connect to Internet when system is running Vista. I try on another system which is running XP is working fine. I have tried to turn off the Windows and anti virus firewall, but the resukt is still the sam