Creating wmv with flip4mac

Hi,
I want to transform material filmed with Sony XDCam EX3 1920 x 1080 25fps 1080i50 35Mb/s VBR into wmv for using it with power point.
With flip4mac and compressor transforming is quite easy, but to get good quality quite complicated, I think.
I get files with quality much inferior than my original. Does anybody has got some ideas or advice?
What do I have to consider most? There is a good tutorial here:
http://www.kenstone.net/fcp_homepage/encoding_windows_flip4mac_gary.html
But it doesn't explain the bitrate I have to choose, or the size.
Thanks a lot!
Paula

I believe I actually have the correct answer to this. To convert my HD EX1 files to WMV I use Flip4Mac HD. I use the following settings:
Two pass, variable bit rate
Quality 90
Bit rate 1500 kb/sec
size 960x540 (although you can use 640x360) I do this because most of my end users don't have a 1920x1080 screen.
Then "advanced" Interlace upper. Because I shoot interlaced.
I get really, really nice WMV's from this which all of my end users can use in Power Point.
I got these settings from someone else on one of these forums after many hours of trying myself.
I also agree that H.264 files look better but they don't work worth **** on a PC with Power point.
Hope this helps.

Similar Messages

Problem Converting Keynote Quicktime to WMV with Flip4Mac

HI All
I can see that perhaps one other person may have had this issue. I have a continuous presentation exported from Ketnote as a Quicktime Movie. This plays from end to end without a hitch.
I am using Flip4Mac to convert to WMV, something I have done on many occasions with other QT files without issue (not from Keynote)
The resulting file only exports to the first transition in the Keynote presentation.
I have made the quicktime continuous (so it does not stop at slide changes) I have tried un-checking the sprite track option.
Pretty much every combination but it still always only exports to the first transition.
Any clues ? What am I missing ?
Thanks for your help

Hi
yes it does however I have been messing around over the weekend and have got some of the way to solving this.
Sorry its a bit long and convoluted but here goes.
I extracted the video and audio tracks as suggested below and made a new flattened movie.
I then found a utility to remove all the chapter markers from Ecamm Network.
This removed every chapter (slide) marker.
I then re-saved and made a WMV from that file. It exported until the last transition and stopped !! ( I checked with the orig file)
So I then converted the end section to WMV and joined the 2 WMV files together in Quicktime Pro.
This then played happily from end to end.
BUT you cant then save that as a WMV ! Quicktime exports it again as a .mov
So I thought that .mov must work if I convert that to wmv but no, stops in the exact same place.
There is no sprite track no chapters but there must be some other metadata that is upsetting Flip4Mac
Anyway closer than I was.
Cant import to FCP or use DV as despite setting the frame rate to 25 in Keynote it actually exports at 22 so any 'video' frame rates make the animation very jerky as you would expect.
thanks for you help though everyone
Neil

How to covert wmv with Flip4Mac

Can someone help me with it. I want to play mwv files on my i-pod and I know that I need to convert it. I already upgrated flip4mac but I still don't know how to convert the file. I am new to the mac system and it's very confusing.

I though I could ask here since some people in this
forum suggested Flip4Mac.
I think that your post was in an appropriate place and that you are owed an apology.
Having got an upgraded Flip4Mac, you should be able to convert your wmv files to an ipod format by first opening the wmv movie in Quicktime and then opening the File menu, select export and choose ipod as one of your options........However, I think that you must first buy the Quicktime pro key if you don't have it already..........
An alternative would be to use iSquint which is free and does exactly what you want. Also look out for VisualHub from the same people(person) which does cost a little but does lots of other things.
There are other alternatives. I am just relating what works for me

.wmv into FCP back to .wmv - best workflow with Flip4Mac?

Apologies if this has been asked before, can't find a specific answer to this.
My client has provided a .wmv (windows media video 9) source file that needs to be edited.
The client needs the final format to also be .wmv with the WMV9 codec.
I've downloaded and shelled out for Flip4Mac Studio, no problem playing the file in QT or FCP. Now, apart from being able to play, import and export to wmv, I assumed I would be able to also create a .wmv sequence in FCP, but not getting any wmv9 codec in my sequence settings.
Am I missing something? Or if it's not possible to create a wmv9 sequence, what's the best workflow?
Source file is 720x540 @ 25fps, bit rate 2303 kbps, audio is 44.1kHz
Thanks.
(PS Belated Happy Thanksgiving to all my pals over there in the US)

Thanks Jerry - believe me I wouldn't be working with this version if I didn't have to. It's for presentation within Windows Media Player ultimately so it will probably be OK if I can maintain most of the original quality.< </div>
Coming into Quicktime is an issue simply because they're different universes, but you know that.
You know what I'd do? I'd find some yutz with a PC and pay him/her to edit it on some Microsoft product. Instant in, instant out.
Short of that, converting the .wmv to something simple that will work in FCP is not going to give you any appreciable compression hit if it started out so small. Compressing again for .wmv v9.0 isn't going to improve anything but it shouldn't diminish either.
bogiesan

Error Msg.: "Inconsistent Audio Sample Rate" with Flip4Mac

If you're using Flip4Mac to produce WMV files, the latest QT updates will create a conflict with Flip4Mac, which produces the error msg. referenced in the subj. heading above.
If you're using Flip4Mac, you may want to wait until Telestream resolves the issue before upgrading QT.
More info is here: http://www.flip4mac.com/knowledge/kb_0070.htm
and here: http://forum.flip4mac.com/forum/messageview.aspx?catid=10&threadid=270&enterthre ad=y
MacPro, MBP 17in (2 GB RAM), PB G4 15in, PB G4 12in, iMac G3 Mac OS X (10.4.9) Loyal to Apple since the Apple ][+

Just in from flip4mac support:
The recent release of QuickTime 7.2 created an audio compression error for Flip4Mac WMV Studio, Studio Pro and Studio Pro HD customers. Specifically, when encoding WMV files with Flip4Mac WMV v.2.1.2 using uncompressed audio sources on QuickTime 7.2 systems, customers were receiving "Inconsistent Audio Sample Rate" error and the encode will fail. This problem has been resolved with the beta release of Flip4Mac WMV v2.1.33. If you are using QuickTime 7.2, please upgrade to this release at http://www.flip4mac.com/wmv_beta.htm

Having trouble creating .WMV from slideshow in Organizer (11)

When creating .WMV from a slideshow in Organizer (11), the photographs aren't showing up. They seem fine in the slideshow, but when I output to .WMV I get the audio but not the pics. I have done this many times before and it has worked fine, not sure why it isn't working now.
I am trying to take these to Premier Elements to create a DVD with menus. If I take the slideshow/project, rather than a .WMV, it tells me it doesn't like .jpg and I get some black frames. In the past, if I created .WMVs, I got around this problem. Suggestions?
Thanks....

If you're running under Windows try this.
Find the Organizer executable file (on a 64-bit system this would be C:\Program Files (x86)\Adobe\Elements 12 Organizer\PhotoshopElementsOrganizer.exe).
Right-click it and select 'Run As Administrator'.
I had a similar problem when I had both PSE11 & PSE12 installed - Slide show would only ever work in one of them, but an Adobe staff member posted the above suggestion and it worked for me (both versions now work properly).
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Creating WMV files

I would like to know the best way to creat WMV files with a Mac. I need to be able to put my video presentations on my HP Ipaq that only excepts WMV files for video.

an easy way that I noticed is that when you "right click" the document go to "get info" and change the name so that it's not a .m4p or the quicktime file and change it to a .wmv

Creating animations with transparent backgrounds?

I'm running into some problems when using After Effects to create animations with transparent backgrounds for Keynote...
I use animated gifs and short quicktime movies with uniform backgrounds as source files, use color keying to take out the backgrounds, preview them to see if they look OK, render the results as RGB+alpha, and... they don't show up as transparent in Keynote. They work in Powerpoint, however. I've tried outputting as .mov, as .gif, as premultiplied vs straight alpha... no joy. Can someone explain (or point me to an explanation) of how Keynote differs from other programs in its handling of transparency? What am I missing?

Using a TYPE_INT_ARGB BufferedImage worked beautifully. I had played around with Image for hours, but it never occurred to me that BufferedImage would be needed. :)
many, many thanks,
Steven

Webi Stucks while trying to create report with BW7.0 (WIS 10901)

Hello,
I have some problem about using data created from BW 7.0
1. After I try to drag more than one object to create report from webi and run the query, it got sutcked and appear error as below;
A database error occured. The database error text is: The MDX query SELECT { } ON COLUMNS , HIERARCHIZE( UNION( { [0GL_ACCOUNT INT].[INT 0HIER_NODE] } , { GENERATE ( { [0GL_ACCOUNT INT].[INT 0HIER_NODE] } , { Descendants( [0GL_ACCOUNT INT].CURRENTMEMBER, [0GL_ACCOUNT INT].[LEVEL01]) } ) } ) ) DIMENSION PROPERTIES PARENT_UNIQUE_NAME ON ROWS FROM [$0ABC_C06] SAP VARIABLES [0DAT] INCLUDING 20080606 failed to execute with the error See RFC trace file or SAP system log for more details. (WIS 10901)
this error appears when I try to..
- create query with more than one object
- enable drill-down for the object and click the report to drill down
(This error appears the same in Voyager when drag objects into crosstab)
2. problems with displaying Thai language content created from BW, after I created object, thai content always appears as "######" event I change font to "tahoma", it returns the same result.
any expert could help me... thanks in advance
I use BOBJ XI 3.0, SAPBW 7.0
step:
1. Create universe connect to BW 7.0 and export universe
2. logon to infoview, choose universe to create report from webi
3. drag object and test drill down
and step for voyager
1. create voyager connection to SAP BW 7.0 use specified username and password
2. use voyager to create report
3. drag object into crosstab

Hello.
We have solved this issue. We tested our connection with MDX Parser in transaction SM59 and that resulted in errors. Then we applied SAP note 1032461 to replace an application server dll (librfc32u.dll). After this procedure, the WebIntelligence was able to run queries with more then 2 dimensions and key-figures!
Thanks for all.

How to create Delivery with sales order FM/BAPI

Hi Gurus,I'm new to SAP platform
I have created sales order ,
with this i need to create Delivery(vl01n)
so i need to give 'Shipping Point','Selection Date','SD Number'
so could any one tel me which FM/BAPI is suitable to create
Outbound delivery with 'sales order number', 'Selection date' and
"Plant or Shipping Point'.
With these Import parameters i need FM/BAPI .
Thanks in Advance
Siva Kumar kasa.

I have created delivery with that BAPI
giving 'batch number' but it was not updated,so can u tel me
any related field which need give to change batch field also.

How to create Invoice with ref to PO

Dear sd gurus..
i know we can create invoice with ref to sales order not with po
But i want to create Invoice with ref to po only
please guide me
Thanks a lot

Venu, thanks for your reply.
So in this case your idea wont work but the main imp thing is we cant create invoice with ref to po
Please read my post once again, i never said we can create customer invoice with ref to Purchase order. I said very clearly, " you can follow the normal 3rd party sales process", which means we create customer invoice with ref to sales order only.
Coming into another query,
but some time PO Is generated 110 qth to vendor but vendor may be he will send 105 due to shortage ... and he will tell i will send the the remaining stock after next 10 days now Generally miro will happen only for 105 not 110 ( even we can do MIRO110 also ) but i am talking generally because he received the stock 105 only
But company wants billing for 110 not for 105 because here customer accepted to pay full money
and vendor gave promise to delivery 5 qty in next 10 days
Why will the customer agree to be billed the full qty, when he receive the partial qty?
Let us assume as you said customer agree to pay for full qty, then there are two options.
1. Do the MIRO for full qty since you would be invoicing the customer for full qty
Or
2. Do the MIRO for partial qty and customer should agree for partial invoice
Please note in the normal case also if there is if condition then you don't have other option.
Example:
Order = 100 qty
PO = 100 qty
MIGO = 50 qty and remaining 50 qty Vendor delivery in next 10 days
MIRO =50 qty
But here also customer agreed to pay for full qty, then what will you do ? you don't have other option but to bill the partial qty in standard.
And let me know if you need any more clarity?
thanks,
Srinu.

I have a new email address. Changed this on my itunes account. On iPhone deleted old icloud account and created new with new email. I have set find my phone to on. When I download music it no longer goes to icloud an does not show up on my iphone.

I have a new email address. Changed this on my itunes account. On iPhone deleted old icloud account and created new with new email. I have set find my phone to on. When I download music from itunes it no longer goes to icloud an does not show up on my iphone.

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

Problem while Creating MVLOG with synonym in Oracle 9i:Is it an Oracle Bug?

Hi All,
I am facing a problem while Creating MVLOG with synonym in Oracle 9i but for 10G it is working fine. Is it an Oracle Bug? or i am missing something.
SQL> select * from v$version;
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE    10.2.0.1.0      Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
2 REFRESH ON DEMAND
3 WITH PRIMARY KEY
4 AS
5 SELECT name,id
6 FROM syn_t;
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
2 WITH PRIMARY KEY
3   (name)
4    INCLUDING NEW VALUES;
Materialized view log created.
SQL> select * from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
PL/SQL Release 9.2.0.6.0 - Production
CORE    9.2.0.6.0       Production
TNS for Solaris: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
REFRESH ON DEMAND
WITH PRIMARY KEY
AS
2    3    4    5 SELECT name,id
FROM syn_t;   6
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
WITH PRIMARY KEY
(name)
INCLUDING NEW VALUES; 2    3    4
CREATE MATERIALIZED VIEW LOG ON MV_t
ERROR at line 1:
ORA-12014: table 'MV_T' does not contain a primary key constraintRegards
Message was edited by:
Avinash Tripathi
null

Hi Nicloei,
Thanks for the reply. Actually i don't want any work around (Creating MVLOG on table rather than synonym is fine with me) . I just wanted to know it is actually an oracle bug or something else.
Regards
Avinash

How to create complaints with reference to ECC Billing document (CRM 7.0)

Hi experts!
I use ECC 6.0 and CRM 7.0.
I have to create CRM complaints (ZCLR - CLRP) with reference to ecc billing documents.
I read the following topics and help:
1. How to create complaints with referenceto ECC Billing document
2. Re: How can we transfer billing documents from SAP ERP to CRM 2007?
3. http://help.sap.com/saphelp_crm70/helpdata/en/46/029ba32e675c1ae10000000a1553f6/frameset.htm
Made these settings:
1. Define the Business object type
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>Define Object types for Transaction reference
2. Assign Business Object Types to Transaction Types
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>Assign Business Object Types to Transaction Types
3. Implement a BADI - CRM_COPY_BADI_EXTERN.Check Implementation CRM_COPY_BADI_BILLDO for more information on the coding for referencing the ECC Billing document.
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>BAdI: Create Complaint with Reference to External Transaction.
but still do not know,
1) if I should pre-replicate billing documents into CRM ?
2) Or, the system uses the RFC to find these documents in ECC to create reference?
Please help me.
Best regards Kostya.
Edited by: Kostya Khveshchenik on Oct 20, 2010 2:09 PM

not resolved =(
Edited by: Kostya Khveshchenik on Nov 19, 2010 8:50 AM

What are right parameter types of ODCIIndexInsert in case of creating indextype WITH ARRAY DML option (documentation mismatch)

Hello.
During developing Domain Index for Oracle 11.2.0.1.0 (problem also appears in 12с) i was faced with misunderstanding of parameter types of function
ODCIIndexInsert in case of creating indextype WITH ARRAY DML option
According to Oracle documentation
http://docs.oracle.com/cd/E11882_01/appdev.112/e10765/ext_idx_ref.htm#i76892
In case of WITH ARRAY DML option Oracle will invoke ODCIIndexInsert with following signature
FUNCTION ODCIIndexInsert(
ia ODCIIndexInfo,
ridlist ODCIRidList,
newvallist varray_of_column_type,
env ODCIEnv)
RETURN NUMBER
In my case indexed column has datatype NUMBER so i defined varray_of_column_type as SYS.ODCINumberList
STATIC FUNCTION ODCIIndexInsert(ia in sys.ODCIIndexInfo, ridlist in sys.ODCIRidList, newvallist in sys.ODCINumberList, env in SYS.ODCIEnv) RETURN NUMBER
Indextype was created as
CREATE INDEXTYPE test_index_type
FOR
test_eq(number, number)
USING index_methods
WITH ARRAY DML(number, sys.ODCINumberList)
WITH LOCAL RANGE PARTITION
WITH SYSTEM MANAGED STORAGE TABLES;
or
CREATE INDEXTYPE test_index_type
FOR
test_eq(number, number)
USING index_methods
WITH ARRAY DML
WITH LOCAL RANGE PARTITION
WITH SYSTEM MANAGED STORAGE TABLES;
(problem occurs in all cases)
CREATE TABLE test_table (id NUMBER (19,0));
CREATE INDEX test_index ON test_table(id) INDEXTYPE IS test_index_type;
When attempting to insert data in the table
insert into test_table values (1);
oracle raise exception
Error starting at line 53 in command:
insert into test_table values (1)
Error at Command Line:53 Column:1
Error report:
SQL Error: ORA-29925: cannot execute SCOTT.INDEX_METHODS.ODCIINDEXINSERT
ORA-06553: PLS-306: wrong number or types of arguments in call to 'ODCIINDEXINSERT'
ORA-06553: PLS-306: wrong number or types of arguments in call to 'ODCIINDEXINSERT'
29925. 00000 - "cannot execute %s"
*Cause:    The specified function does not exist or does not have an
           appropriate signature.
*Action:   Implement the function with the appropriate signature.
So my question is.
Is it normal behavior of oracle (according to documentation)?
What is correct signature of ODCIIndexInsert function in case of INDEXTYPE creation with 'WITH ARRAY DML' option and fact that indexed column has NUMBER datatype?
By the way if i define indextype without 'WITH ARRAY DML' option signature is clear, and working. But this approach doesn't satisfies our performance needs.
Also if i define index type with option 'WITH ARRAY DML WITHOUT COLUMN DATA' and use signature
static function ODCIIndexInsert(ia sys.odciindexinfo,   ridlist sys.odciridlist, env sys.ODCIEnv) return number
Everything works too. But this approach doesn't satisfies our business needs.
Is it a way to define ODCIIndexInsert parameter types (in case of indexing number column) so that batch inserting works according to documentation ?
FUNCTION ODCIIndexInsert(
      ia ODCIIndexInfo,
      ridlist ODCIRidList,
      newvallist varray_of_column_type,
      env ODCIEnv)
I am attaching full sql script to recreate environment and reproduce the problem.
Type definition:
CREATE OR REPLACE TYPE index_methods AS OBJECT
step number,
STATIC FUNCTION ODCIGetInterfaces(ifclist OUT SYS.ODCIObjectList) RETURN NUMBER,
STATIC FUNCTION ODCIIndexCreate (ia SYS.ODCIIndexInfo, parms VARCHAR2, env SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexAlter (ia sys.ODCIIndexInfo, parms IN OUT VARCHAR2, altopt number, env sys.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexDrop(ia SYS.ODCIIndexInfo, env SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexExchangePartition(ia SYS.ODCIIndexInfo, ia1 SYS.ODCIIndexInfo, env SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexUpdPartMetadata(ia sys.ODCIIndexInfo, palist sys.ODCIPartInfoList, env sys.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexInsert(ia in sys.ODCIIndexInfo, ridlist in sys.ODCIRidList, newvallist in sys.ODCINumberList, env in SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexDelete(ia SYS.ODCIIndexInfo, rid VARCHAR2, oldval number, env SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexUpdate(ia SYS.ODCIIndexInfo, rid VARCHAR2, oldval number, newval number, env SYS.ODCIEnv) RETURN NUMBER,
STATIC FUNCTION ODCIIndexStart(sctx IN OUT index_methods, ia SYS.ODCIIndexInfo,
    op SYS.ODCIPredInfo, qi sys.ODCIQueryInfo, strt number, stop number, cmpval number, env SYS.ODCIEnv) RETURN NUMBER,
MEMBER FUNCTION ODCIIndexFetch(self IN OUT index_methods, nrows NUMBER, rids OUT SYS.ODCIridlist, env SYS.ODCIEnv) RETURN NUMBER,
MEMBER FUNCTION ODCIIndexClose(self IN index_methods, env SYS.ODCIEnv) RETURN NUMBER
CREATE OR REPLACE TYPE BODY index_methods IS
STATIC FUNCTION ODCIGetInterfaces(ifclist OUT sys.ODCIObjectList) RETURN NUMBER IS
BEGIN
ifclist := sys.ODCIObjectList(sys.ODCIObject('SYS','ODCIINDEX2'));
RETURN ODCIConst.Success;
END ODCIGetInterfaces;
STATIC FUNCTION ODCIIndexCreate (ia sys.ODCIIndexInfo, parms VARCHAR2, env sys.ODCIEnv) RETURN NUMBER IS
BEGIN
RETURN ODCIConst.Success;
END ODCIIndexCreate;
STATIC FUNCTION ODCIIndexDrop(ia sys.ODCIIndexInfo, env sys.ODCIEnv) RETURN NUMBER IS
BEGIN
RETURN ODCIConst.Success;
END ODCIIndexDrop;
STATIC FUNCTION ODCIIndexAlter (
ia sys.ODCIIndexInfo,
parms IN OUT VARCHAR2,
altopt NUMBER,
env sys.ODCIEnv)
RETURN NUMBER IS
BEGIN
RETURN ODCIConst.Success;
END ODCIIndexAlter;
STATIC FUNCTION ODCIIndexUpdPartMetadata(
ia sys.ODCIIndexInfo,
palist sys.ODCIPartInfoList,
env sys.ODCIEnv)
RETURN NUMBER IS
BEGIN
RETURN ODCIConst.Success;
END ODCIIndexUpdPartMetadata;
STATIC FUNCTION ODCIIndexExchangePartition(
ia sys.ODCIIndexInfo,
ia1 sys.ODCIIndexInfo,
env sys.ODCIEnv)
RETURN NUMBER IS
BEGIN
RETURN ODCIConst.Success;
END ODCIIndexExchangePartition;
STATIC FUNCTION ODCIIndexInsert(
   ia sys.ODCIIndexInfo,
   ridlist sys.ODCIRidList,
   newvallist sys.ODCINumberList,
   env sys.ODCIEnv)
RETURN NUMBER IS
BEGIN
return ODCIConst.Success;
END;
STATIC FUNCTION ODCIIndexDelete(
   ia SYS.ODCIIndexInfo,
   rid VARCHAR2,
   oldval number,
   env SYS.ODCIEnv)
RETURN NUMBER IS
BEGIN
return ODCIConst.Success;
END;
STATIC FUNCTION ODCIIndexUpdate(
   ia SYS.ODCIIndexInfo,
   rid VARCHAR2,
   oldval number,
   newval number,
   env SYS.ODCIEnv)
RETURN NUMBER AS
BEGIN
return ODCIConst.Success;
END;
STATIC FUNCTION ODCIIndexStart(
sctx IN OUT index_methods,
ia SYS.ODCIIndexInfo,
op SYS.ODCIPredInfo,
qi sys.ODCIQueryInfo,
strt number,
stop number,
cmpval number,
env SYS.ODCIEnv)
RETURN NUMBER AS
BEGIN
sctx := index_methods(1);
return ODCIConst.Success;
END;
MEMBER FUNCTION ODCIIndexFetch(
self IN OUT index_methods,
nrows NUMBER,
rids OUT SYS.ODCIridlist,
env SYS.ODCIEnv)
RETURN NUMBER AS
BEGIN
return ODCIConst.Success;
END;
MEMBER FUNCTION ODCIIndexClose(self IN index_methods, env SYS.ODCIEnv) RETURN NUMBER AS
BEGIN
return ODCIConst.Success;
END;
end;
Problem workaround:
--drop function test_eq_fun;
CREATE FUNCTION test_eq_fun(a number, b number) RETURN NUMBER AS
BEGIN
IF a = b then
    RETURN 1;
ELSE
    RETURN 0;
END IF;
END;
--drop operator test_eq;
CREATE OPERATOR test_eq
BINDING (number, number) RETURN NUMBER
USING test_eq_fun;
--drop indextype test_index_type;
CREATE INDEXTYPE test_index_type
FOR
test_eq(number, number)
USING index_methods
WITH ARRAY DML(number, sys.ODCINumberList)
WITH LOCAL RANGE PARTITION
WITH SYSTEM MANAGED STORAGE TABLES;
CREATE INDEXTYPE test_index_type
FOR
test_eq(number, number)
USING index_methods
WITH ARRAY DML
WITH LOCAL RANGE PARTITION
WITH SYSTEM MANAGED STORAGE TABLES;
--drop table test_table;
CREATE TABLE test_table (id NUMBER (19,0));
CREATE INDEX test_index ON test_table(id) INDEXTYPE IS test_index_type;
insert into test_table values (1);

I get single for 1 row and batch for 2 or more rows in the following simplified simulation.
SCOTT@orcl12c> DESC SYS.ODCINUMBERLIST
SYS.ODCINUMBERLIST VARRAY(32767) OF NUMBER
SCOTT@orcl12c> CREATE OR REPLACE TYPE index_methods AS OBJECT
2 (
3    step number,
4    STATIC FUNCTION ODCIGetInterfaces(ifclist OUT SYS.ODCIObjectList) RETURN NUMBER,
5    STATIC FUNCTION ODCIIndexCreate (ia SYS.ODCIIndexInfo, parms VARCHAR2, env SYS.ODCIEnv) RETURN NUMBER,
6    STATIC FUNCTION ODCIIndexAlter (ia sys.ODCIIndexInfo, parms IN OUT VARCHAR2, altopt number, env sys.ODCIEnv) RETURN NUMBER,
7    STATIC FUNCTION ODCIIndexDrop(ia SYS.ODCIIndexInfo, env SYS.ODCIEnv) RETURN NUMBER,
8    STATIC FUNCTION ODCIIndexExchangePartition(ia SYS.ODCIIndexInfo, ia1 SYS.ODCIIndexInfo, env SYS.ODCIEnv) RETURN NUMBER,
9    STATIC FUNCTION ODCIIndexUpdPartMetadata(ia sys.ODCIIndexInfo, palist sys.ODCIPartInfoList, env sys.ODCIEnv) RETURN NUMBER,
10    STATIC FUNCTION ODCIIndexInsert(ia in sys.ODCIIndexInfo, rid in VARCHAR2, newval in NUMBER, env in SYS.ODCIEnv) RETURN NUMBER,
11    STATIC FUNCTION ODCIIndexInsert(ia in sys.ODCIIndexInfo, ridlist in sys.ODCIRidList, newvallist in your_type, env in SYS.ODCIEnv) RETURN NUMBER,
12    STATIC FUNCTION ODCIIndexDelete(ia SYS.ODCIIndexInfo, rid VARCHAR2, oldval number, env SYS.ODCIEnv) RETURN NUMBER,
13    STATIC FUNCTION ODCIIndexUpdate(ia SYS.ODCIIndexInfo, rid VARCHAR2, oldval number, newval number, env SYS.ODCIEnv) RETURN NUMBER,
14    STATIC FUNCTION ODCIIndexStart(sctx IN OUT index_methods, ia SYS.ODCIIndexInfo,
15       op SYS.ODCIPredInfo, qi sys.ODCIQueryInfo, strt number, stop number, cmpval number, env SYS.ODCIEnv) RETURN NUMBER,
16    MEMBER FUNCTION ODCIIndexFetch(self IN OUT index_methods, nrows NUMBER, rids OUT SYS.ODCIridlist, env SYS.ODCIEnv) RETURN NUMBER,
17    MEMBER FUNCTION ODCIIndexClose(self IN index_methods, env SYS.ODCIEnv) RETURN NUMBER
18 );
19 /
Type created.
SCOTT@orcl12c> CREATE OR REPLACE TYPE BODY index_methods IS
2 STATIC FUNCTION ODCIGetInterfaces(ifclist OUT sys.ODCIObjectList) RETURN NUMBER IS
3 BEGIN
4    ifclist := sys.ODCIObjectList(sys.ODCIObject('SYS','ODCIINDEX2'));
5    RETURN ODCIConst.Success;
6 END ODCIGetInterfaces;
7
8 STATIC FUNCTION ODCIIndexCreate (ia sys.ODCIIndexInfo, parms VARCHAR2, env sys.ODCIEnv) RETURN NUMBER IS
9 BEGIN
10    RETURN ODCIConst.Success;
11 END ODCIIndexCreate;
12
13 STATIC FUNCTION ODCIIndexDrop(ia sys.ODCIIndexInfo, env sys.ODCIEnv) RETURN NUMBER IS
14 BEGIN
15    RETURN ODCIConst.Success;
16 END ODCIIndexDrop;
17
18 STATIC FUNCTION ODCIIndexAlter (
19    ia sys.ODCIIndexInfo,
20    parms IN OUT VARCHAR2,
21    altopt NUMBER,
22    env sys.ODCIEnv)
23 RETURN NUMBER IS
24 BEGIN
25    RETURN ODCIConst.Success;
26 END ODCIIndexAlter;
27
28 STATIC FUNCTION ODCIIndexUpdPartMetadata(
29    ia sys.ODCIIndexInfo,
30    palist sys.ODCIPartInfoList,
31    env sys.ODCIEnv)
32 RETURN NUMBER IS
33 BEGIN
34    RETURN ODCIConst.Success;
35 END ODCIIndexUpdPartMetadata;
36
37 STATIC FUNCTION ODCIIndexExchangePartition(
38    ia sys.ODCIIndexInfo,
39    ia1 sys.ODCIIndexInfo,
40    env sys.ODCIEnv)
41 RETURN NUMBER IS
42 BEGIN
43    RETURN ODCIConst.Success;
44 END ODCIIndexExchangePartition;
45
46 STATIC FUNCTION ODCIIndexInsert(
47      ia sys.ODCIIndexInfo,
48      rid VARCHAR2,
49      newval NUMBER,
50      env sys.ODCIEnv)
51 RETURN NUMBER IS
52 BEGIN
53    dbms_output.put_line ('single');
54    return ODCIConst.Success;
55 END;
56
57 STATIC FUNCTION ODCIIndexInsert(
58      ia sys.ODCIIndexInfo,
59      ridlist sys.ODCIRidList,
60      newvallist your_type,
61      env sys.ODCIEnv)
62 RETURN NUMBER IS
63 BEGIN
64    dbms_output.put_line ('batch');
65    return ODCIConst.Success;
66 END;
67
68 STATIC FUNCTION ODCIIndexDelete(
69      ia SYS.ODCIIndexInfo,
70      rid VARCHAR2,
71      oldval number,
72      env SYS.ODCIEnv)
73 RETURN NUMBER IS
74 BEGIN
75    return ODCIConst.Success;
76 END;
77
78 STATIC FUNCTION ODCIIndexUpdate(
79      ia SYS.ODCIIndexInfo,
80      rid VARCHAR2,
81      oldval number,
82      newval number,
83      env SYS.ODCIEnv)
84 RETURN NUMBER AS
85 BEGIN
86    return ODCIConst.Success;
87 END;
88
89 STATIC FUNCTION ODCIIndexStart(
90    sctx IN OUT index_methods,
91    ia SYS.ODCIIndexInfo,
92    op SYS.ODCIPredInfo,
93    qi sys.ODCIQueryInfo,
94    strt number,
95    stop number,
96    cmpval number,
97    env SYS.ODCIEnv)
98 RETURN NUMBER AS
99 BEGIN
100    sctx := index_methods(1);
101    return ODCIConst.Success;
102 END;
103
104 MEMBER FUNCTION ODCIIndexFetch(
105    self IN OUT index_methods,
106    nrows NUMBER,
107    rids OUT SYS.ODCIridlist,
108    env SYS.ODCIEnv)
109 RETURN NUMBER AS
110 BEGIN
111    return ODCIConst.Success;
112 END;
113
114 MEMBER FUNCTION ODCIIndexClose(self IN index_methods, env SYS.ODCIEnv) RETURN NUMBER AS
115 BEGIN
116    return ODCIConst.Success;
117 END;
118 end;
119 /
Type body created.
SCOTT@orcl12c> CREATE FUNCTION test_eq_fun(a number, b number) RETURN NUMBER AS
2 BEGIN
3    IF a = b then
4       RETURN 1;
5    ELSE
6       RETURN 0;
7    END IF;
8 END;
9 /
Function created.
SCOTT@orcl12c> CREATE OPERATOR test_eq
2 BINDING (number, number) RETURN NUMBER
3 USING test_eq_fun
4 /
Operator created.
SCOTT@orcl12c> CREATE INDEXTYPE test_index_type
2 FOR
3 test_eq(number, number)
4 USING index_methods
5 WITH ARRAY DML(number, your_type)
6 WITH LOCAL RANGE PARTITION
7 WITH SYSTEM MANAGED STORAGE TABLES
8 /
Indextype created.
SCOTT@orcl12c> CREATE TABLE test_table (id NUMBER (19,0))
2 /
Table created.
SCOTT@orcl12c> CREATE INDEX test_index ON test_table(id) INDEXTYPE IS test_index_type
2 /
Index created.
SCOTT@orcl12c> insert into test_table values (1)
2 /
single
1 row created.
SCOTT@orcl12c> insert into test_table
2 select 2 from dual union all
3 select 3 from dual
4 /
batch
2 rows created.
SCOTT@orcl12c> insert into test_table select deptno from dept
2 /
batch
4 rows created.
SCOTT@orcl12c> insert into test_table select object_id from user_objects
2 /
batch
34 rows created.
SCOTT@orcl12c>

Creating wmv with flip4mac

Similar Messages

Maybe you are looking for