Creating ZMATERIAL from 0MATERIAL and its MD extractor

Hi all,
i need to create a copy of 0MATERIAL on BW (name it ZMATERIAL) and i need to create the master data (text and attr) extractor as a copy of the 0MATERIAL extractor on R/3. How can i do that last part ?
i need to do the same with several std InfoObjects.
thanks in advance
J.P.

The problem is that my client is being doing those change to the std InfoObjects and using them. But by mistake someone reactivate the std and every change made before was missing (with all the repercution involved).
They think is too dangerous to modify the std cause if someone reactivate it from BC the changes will be lose.
What is this flexible master data about ?
Cheers
JP

Similar Messages

I have iphone 4s from sprint and its motherboard is damaged so please provide me what to do it is not in warranty and i am in India now.thanks in advance.

I have iphone 4s from sprint and its motherboard is damaged so please provide me what to do it is not in warranty and i am in India now.thanks in advance.

No, the logic board needs to be replaced. But, here's your ptoblem: No authorized service center, In India, will touch a US iPhone. Thus, your only option is a third-party repair shop. But, since Apple does not sell iPhone parts, many on the market are counterfeit. In other words, if you go to a third-party repair shop, you take your chances as to what you end up with.
If you can't send the phone to someone in the US, that can go to an Apple store for you, & do an out of warranty exchange...cost is US $199...then sell the phone for parts or go to a third-party repair shop & hope you don't end up worse than you are now.
Those are your options.
Good luck.

I have purchased Iphone 4 from US and its not having sim in it and rt now when i have updated this to io5 ,it is showing "sim card inserted in iphone is not supported" and i am not able access aything."

I have purchased Iphone 4 from US and its not having sim in it and rt now when i have updated this to io5 ,it is showing "sim card inserted in iphone is not supported" and i am not able access aything."
Earlier i was able to use all application in this using IOS 5.0.1.
I have format it and after that i am not able to use it.
How to restore my itunes to 5.0.1???

Well, welcome to the world of "hacked" phones. If your purchase was from the US, you obviously purchased an iPhone that is locked to a US carrier. The iPhone must have been jailbroken and unlocked via software to accommodate your foreign SIM card. Now that you have updated the phone, it is locked back to the US carrier. Only the carrier can authorize Apple to unlock the iPhone and none of the US carriers will unlock the iPhones. Best suggestion is to sell the phone and obtain a factory unlocked version directly from the Apple store.
To answer your other question, there is not a supported method to downgrade iOS.

Just updated to Imovie 11 created first video finalized and its gone!

Just updated to Imovie 11 created first video finalized and its gone! The only file that remains anywhere on the computer is a .rcproject file that wont open in anything including Imovie. There is no record of the file anywhere in Imovie...Help!!! This was my final for a Music class and Im obviously screwed if I dont get this back...THANKS!

When you finalize a movie, it places finished movies of all available sizes in the Media Browser. It is important to leave the rcproject file where it is in the Movies/iMovie Projects folder. If you have moved it, move it back.
In iMovie, when you Share to iTunes, or Share to YouTube, etc. ti will use the Media Browser copy so it does not have to re-render. But if you do not Finalize first, no problem, you can still use all those options and cause a render.
The Media Browser files are contained in the RCPROJECT package. Right click on the rcproject file in the Movies/iMovie Projects folder for your project. Select SHOW PACKAGE CONTENTS. Like in the Movies folder, and you will see your movies.

How to create new .dat file and its contents?

Hi There
Can anybody let me know the procedure of how to create new .ctl or .dat file to load data to tables.
i working on 2day dba chapter 8. it shows me how to creat table and use .dat file to load data. but doesnot giv any clue how new .dat file and its contents can be created. please help.
thanks in advance.

Thanks for ur help
I ve created txt file in notepad and saved it as dat file. tried to load that data thru Enterprise manager. used load data from User files everything went well and job was showing suceeded but dont know why that data is not showing in the table. i ve tried it now for three four times. used right table and pathe but dont know. has anybody got idea why that ll be?
Thanks

Create A/R Invoice and Its Incoming Payment using DI Server

Hi Everyone,
I need to create an A/R Invoice and its payment in a sigle transaction using DI Server. The problem is that I don't know the DocEntry that will be assigned to the invoice in order to set it in the SOP message for creating the incoming payment.
I guess the SOAP message should look like:
<?xml version="1.0" encoding="UTF-16"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header>
<SessionID>F46EDCE6-3F79-1F9F-1D1E-DC6226D04FA7</SessionID>
</env:Header>
<env:Body>
<dis:AddObject xmlns:dis="http://www.sap.com/SBO/DIS" CommandID="Add invoice">
<BOM>
   <BO>
    <AdmInfo>
     <Object>oInvoices</Object>
    </AdmInfo>
    <Documents>
     <row>
      <DocDate>20040707</DocDate>
      <DocDueDate>20040707</DocDueDate>
      <CardCode>BP</CardCode>
     </row>
    </Documents>
    <Document_Lines>
     <row>
      <ItemCode>Item1</ItemCode>
      <Quantity>3</Quantity>
      <TaxCode>My Tax</TaxCode>
     </row>
    </Document_Lines>
</BO>
</BOM>
</dis:AddObject>
<dis:AddObject xmlns:dis="http://www.sap.com/SBO/DIS" CommandID="Add Incoming Payment">
<BOM>
   <BO>
    <AdmInfo>
       <Object>oIncomingPayments</Object>
    </AdmInfo>
    <Payments>
       <row>
           <CardCode>BP</CardCode>
           <DocTypte>rCustomer</DocTypte>
       </row>
   <Payments>
   <Payments_Invoices>
        <row>
             <DocEntry>???</DocEntry> <---- ???
             <InvoiceType>it_Invoice</InvoiceType>
            <SumApplied>100</SumApplied>
        </row>
   </Payments_Invoices>
   </BO>
</BOM>
</dis:AddObject>
</env:Body>
</env:Envelope>
Any help?

Dear Hugo Moreno,
You could use the GetNewObjectCode Method of the Company Object to retrieves the key of the last added record.
Please refer to SDK DI API help for this method.
Best Regards
Jane Jing
SAP Business One Forums team

HOW TO - Create new from clipboard and process multiple files - please help

Need help - have new version of photoshop on trial only ATM...
Want to know - HOW TO:
1. Create new from clipbaord
2. Process multiple files
Please help.

For clipboard copy, I start with File > New and the size will be set to what's in the clipboard. Then once the new file is opened, Edit > Paste will place the clipboard contents as a layer in the new document.
You must remember to use the command Layer > Flatten Image of you want to save as jpeg or any other file format that doesn't support layers.
For processing multiple files,
File > Automate > Batch or
File > Scripts > Image Processor...
Check the User guide or google information for those commands if you have specific needs.
Gene

Create Application from Database and Air

I have tried several time to use the create application from
database for an air app build in flex. I do the same steps and the
only difference is that I click the create button as air not web.
It does not seem to work. Does the create application from database
command (referencing php mysql) work with Air???
Thanks

Hi Dave,
Would you please file a bug with all the necessary details
regarding this issue? The bug base is found at:
http://bugs.adobe.com/jira.
We’ll look into this. Thank you for letting us know!
Lacra

Creating Queries from Cubes and ODS

Dear Gurus:
I'd like to learn how to make queries from ODS and CUBES. can any Guru out there prescribe a particular infocube / ods project for me to make report on in both 3.5 and BI 7? I can send daily reports on my progress. I think this is the only way I will learn.. I may even have to seek help to create a simple architecture from Source DataSourc to Target Data Source to transfer Rules to InforSource to ODS to Cube and then fuill it with practice data just so that I can design a query / queries... Can any kind BW Guru offer me his/her assistance please... I may run out of a job if I dont learn soon...
<b>By the way... I would like to make it known that I am starting out totally from scratch.... As in ZERO BW 3.5 and/or BI 7.0 experience nor application background in either. Hence the why I seek expert advice.Your kind support, understanding and advice will be greatly appreciated to no end!</b>

The best way to start off is by reading the material on BW. The link below will give all the materials.
http://www.mysapbi.blogspot.com/
The to get hands on experience follow the scenarios in the best practices the link is below.
http://help.sap.com/bp_biv335/BI_EN/html/Bw.htm
And to get a tutor the best way I know is search for an institute in the following link
www.sulekha.com
Hope this helps.
Bhargava

I buy a song from iTunes and its only 30 seconds when i paid for the whole song

For two songs now i have bought on itunes it only plays for 30 seconds, which is annoying becuase im buying the song not just a preview and its a waste of my money. Its starting to get really annoying now and feel i should get refunfed for the songs that its doing it to. Why would i just want 30 seconds of a song...Can you help me in anyway or figure out why its doing that. I know its not a ringtone its the real song. Im just confused on why it keeps doing that.
Thank you,

Are you playing the songs from within the Music app? Or are you trying to play them from with in the iTunes app? On an iOS device, the iTunes app is just the store. All you'd get there would be the samples.

I just purchased a moive from itunes and its not appearing in my downlaonds

i dont know what to do now, i purchased this movie and its saying that i did so but t just disappeared, it did not auto download. and it does not appear in my downloads either

You probably need to delete your iTunes media downloads folder. From http://support.apple.com/kb/TS3297:
"Error -50," "-5000," "8003," "8008," or "-42023"
These alerts occur due to timeouts or conflicts trying to write a file during download.
If you encounter this issue while accessing iTunes Store:
See iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store
If you encounter this issue while while downloading something from the iTunes Store:
Delete your iTunes Downloads folder, located in:
Mac OS X:  ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
Windows Vista:  \Users\username\Music\iTunes\iTunes Media\Downloads\
Windows 7:  \Users\username\My Music\iTunes\iTunes Media\Downloads\
Windows XP:  \Documents and Settings\username\My Documents\My Music\iTunes\iTunes Media\Downloads\
After locating your iTunes Downloads folder:
Quit iTunes.
Delete the Downloads folder on your computer.
Open iTunes.
Choose Store > Check for Available Downloads.
Enter your account name and password.

I bought an ipod touch from someone and its locked

i bought it from this chick that my friend knows and its locked

Do as the manual says and restore it.
If you are unable to restore the type "unable to restore" into the search bar at the top of this page by Support and read the resulting articles.

How to create a new node and its subnodes(zreports) in Transaction SRET

Hi Expets,
My requirement is to create a new node and subnodes(zreports) in the Transaction SRET.
Where as i am able to create a subnode(zreports) under the existing node but not able to create a New Node and
Subnodes(zreports) under it.
To create the subnodes(zreports) i used Transaction SERP and i was able to create the new node in SERP but not able to find it in SRET.
So please help me out.
Thanks,
Krishna

Dear Pushpa,
Transaction Code :SHD0 is working fine.
Please accept my sincere thanks for your sharing your Knowledge.
I am able to fulfill my
Regarding the enhancement, I have not tried.
Once I will complete, I will award the fulll marks to you.
With Best Regards,
Raghu Sharma

"Create Application from Database" and BLOB type

Hi all,
I see many threads about BLOB type but my question is related to the Flex Builder built-in feature "Create Application from Database".
Is there a way or a sw version to automatically use MySQL BLOB types when creating a PHP/database application?
Thank you!

Hi Dave,
Would you please file a bug with all the necessary details
regarding this issue? The bug base is found at:
http://bugs.adobe.com/jira.
We’ll look into this. Thank you for letting us know!
Lacra

New release! Create themes from images and more

It's a new release of kuler!
- Try color extraction, a new feature to create themes using
photos and other images, with different "mood" options.
- You've requested it, here at last: endless favorites. Save
all that color goodness to Mykuler.
- Random browsing: Try your luck and see what randomly
selected themes kuler serves up.
We've made a few other tweaks, I'll let you discover them for
yourselves. Please post your feedback here; we're especially
curious about color extraction and how this creative group will put
it to use. Enjoy, folks!
the kuler team

Awesome, Sami! I haven't tried the site yet, but the new AIR
extension is
great. I'll try out the site .. soon .. and give some
feedback. Terrific
so far!
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: Dreamweaver CS3: The Missing Manual,
DMX 2004: The Complete Reference, DMX 2004: A Beginner's
Guide
Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"Sami Iwata" <[email protected]> wrote in
message
news:frpioi$mp3$[email protected]..
> It's a new release of kuler!
>
> - Try color extraction, a new feature to create themes
using photos and
> other
> images, with different "mood" options.
> - You've requested it, here at last: endless favorites.
Save all that
> color
> goodness to Mykuler.
> - Random browsing: Try your luck and see what randomly
selected themes
> kuler
> serves up.
>
> We've made a few other tweaks, I'll let you discover
them for yourselves.
> Please post your feedback here; we're especially curious
about color
> extraction
> and how this creative group will put it to use. Enjoy,
folks!
>
> the kuler team
>

Creating ZMATERIAL from 0MATERIAL and its MD extractor

Similar Messages

Maybe you are looking for