Creatintg Source File for GLMAST message type

Hello All,
Can anyone help me identify how to fill E1SKA1M-MSGFN for G/L master upload ? Please let me know how to fill the field for activities Delete/Block/Change/Create.
Thanks
Antony

Hi Antony,
The domain MSGFN has fixed values.
003     Delete: Message contains objects to be deleted
004     Change: Message contains changes
005     Replace: This message replaces previous messages
009     Original: First message for process
023     Wait/Adjust: Data should not be imported
018     Resend
Regards,
Brenda

Similar Messages

Folio Builder: An error has occurred opening the source file for the article layout.

I have been working on a Folio. When I sat down to work on my folio, I was instructed by indesign to update my Folio producer tools, which I did.
Since then I can no longer view any article layout from that folio in indesign. Indeed any folio that I create that does not reside on my desktop give the same problem. I can import articles, add articles and they all upload to the proper place at adobe and I can view them. But I simply cannot open them up through folio builder as I previously.
The exact error message is as below:
An error has occurred opening the source file for the article layout.
The InDesign file for the layout cannot be found.
Another strange thing that seems to be happening is that the folio will randomly reoder the articles in the folio.
I have dumped my indesign prefs, tried creating an entirely new project, made a new account and even reinstalled the entire software.
But the problem of opening an article that I have imported or added to a folio, simply not being found to open has got me stumped. I can't proceed with a major project until I can sort this out.
Can anyone help.
Many thanks
Steve
The problem initially seemed very similar to the one linked below, but I dont get the content generation error
http://forums.adobe.com/thread/901804?decorator=print&displayFullThread=true

Questions about the Adobe Digital Publishing Suite should be posted in the DPS Forum.
http://forums.adobe.com/community/dps

Where the source files for examples of FLASH of the manual (flash_as3_programming.pdf)

Good, I wanted to know where to find the source files for examples of FLASH programming manual with Adobe ActionScript 3.0 (flash_as3_programming.pdf), each sample has a link that had to change and send me the Adobe Developer Center. Thanks,.

Hi,
I had the same problems with the samples. But I got different message. but, instead of typing "ant build", I entered only "ant" on the prompt and I was able to built it.
So, in the comamnd prompt goto your example directory and enter only ant .
The ant will read the build.xml file and you should be able to get it.
bye

Generate xml source file for Oracle Order Capture Print Quote

Hi,
I am new to xml and need to work on creating templates for Print Quote.
I am trying to generate the xml source file for which I enabled the report in system administrator and set the output to XML and assigned to Quoting Reports responsiblity. I then assigned XML Report Publisher to the same responsiblity.
I ran the report (Print Quote) and then I am trying to run the XML Report Publisher but I cannot get the request id in the list of values.
I am able to generate xml source file for other reports like Printed Purchase Order etc.,
The view output for the (Print Quote) report is as follows:
<?xml version="1.0" ?>
- 
<ASOPQTER />
How do I get the xml source file? Or are there seeded templates that I can use to create more templates? Any help would be appreciated. Thanks Ravi

Hi, I am in the same position - did this issue ever ger resolved by anyone. I have done a few XMLP reports successfully now using the Word add-in, but customising the Quote output differs from other standard reports.
If you look at the data definition for Quote it is a 'dummy' definition and has no XML file attached. Does anyone know how I can get the XML format for the report output?
Also the template uses XSL-FO ?!?!?! rather than RTF - not sure how to work with this, the Oracle docs are not very helpful in this regard either.
Has anyone successfully managed to customise the Quote print report? Many thanks,
Roger

PSD source file for animated GIF's - Fireworks CS3

hi
i've upgraded to Web Premium Suite CS3.
Q: i have several PSD source file for animated GIF's created
with ImageReday.
how can i open/iomport/convert it in/to Fireworks CS3 without
looing the "animation"
many thanks
Ueli

ugisiger wrote:
> hi
> no any extras. simply 5 layers "distributed" on the
timeline.
> if i open a "animated" psd, so i get a file with the
layers and one frame, but
> loosing animation stuff like "when show witch layer an
for how long"
> -> there is no conversion to FW frames.
>
> Ueli
>
I don't do animations in PS or IR, but if you like, send me
the file
and I'll see if I can figure something out.
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
Extending Knowledge, Daily
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
news://forums.macromedia.com/macromedia.fireworks
news://forums.macromedia.com/macromedia.dreamweaver

How to add custom infotype in ALE for HRMD_A message type

Hi Friends-
Pls help me for our req we are using HRMD_A Message Type for HR master data but now we need to add one custom infotype ( 9902 ) also in standard ALE filters for this message type how i can do that pls let me know ?
<<removed_by_moderator>>
Regards
Meeta & Glory
Edited by: Vijay Babu Dudla on Dec 14, 2008 11:38 PM

Hi
Thanks for your support,
Pls let me know which steps i should go ? my secanrio is inbound side only,
step 1 ) Define idoc extension for HRMD_A01 using WE30 transaction and define it in partner profiles
step 2) do i need to write some code in BADI also to update information for my custom infotype also if yes then where and which BADI pls let me know ? because already am working on one badi HRALE00INBOUND_IDOC for few validation for incoming data.
step 3 ) add this new custom infotype in my standard ALE filters.
Pls let me know if am mistaking some where or if i have to do some thing else ?
Regards
Meeta & Glory

Example of a source file for Creating general maintenance task list

Hi SAP Gurus,
I need to create general maintenance task list from a source file. Reading forums i found that it is possible by using LSMW, with object 0490 and method 0000.
However, I don't know how to associate structure IBIPTLST, IBITLOP and IBIPMAT. When i assign individual source files for each structure, and I execute LSMW, a problem appears indicating that IBITLOP don't have all the required fields from the list header.
This is the structure propose by SAP in standar programa IBIP.
Structure - IBIPTLST     Task list header
|-->> IBIPTEXT (see comment below)
   |-->> IBIPTLOP   Operations
|       |-->> IBIPTEXT (see comment below)
   |       |-->> IBIPTMAT Material for one operation
   |       |-->> IBIPPRTS Production resources/tools (PRT
   |                   |-->> LONGTEXT (see comment below)
   |       |--> IBIPMPAC Maintenance packages (up to 32)
   |--->> IBIPBDCD (see comment below) from operation overview
In other forums, a possible solution is to define an unique source file, that is proposed by LSMW, but i don't know how to obtain this template.
Can you send me an excel example of how to define de input file or the steps I have to follow in order to execute an LSMW or the standard transaction IBIP?.
My e-mail is [email protected]
I have read all the SAP documentation, what i really need is an example.
Thanks a lot
Andrés.

solved

Logon Error:Could not retrieve the source file for Port "Main"

Hi All,
We have a port which is blocked due to structural exceptions.When i try to connect to the Exceptions folder
"Main[Exceptions]" the import manager throws an error "Logon Error:Could not retrieve the source file for port "Main".
Any help greatly appreciated

Hi ,
Thanks for your reply.
This is what I see in the log file in the exceptions folder
These are the line I see almost to the end of the log file before they complete field mappings,value addings
          <Failure ts="2008/07/22 00:10:48.326 GMT" tid="1286" entry-no="9114" operation="Create lookups" rc="0x80000001">Illegal value for parameter</Failure>
          <Timer ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9115" name="Import Lookup" total="0.040819">1</Timer>
          <Trace ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9116">Import of Lookup Failed.</Trace>
But when I open the same source xml file after downloading to my local folder from Exceptions Structural folder and load manually using IM i get the status as "Ready to import".
Any Help greatly appreciated

Edit Source Files For Skins?

One of our programmers has asked about the possibility of editing the tab index for the skin on the Captivate demos I'm producing. Apparently, the stock playback skins don't meet our accessibility standards as tightly as he'd like. Anyway, I've found a folder in the Captivate 3 program folder called "Templates", within which is another folder called "PlaybackFLA" that contains what appear to be the Flash source files for the skins. The names of these Flash files correspond to the names of the skins in the dropdown menu, so I assume these are the ones.
I opened one in Flash and it was clearly the same playback controls used in my demo, so as a test I changed the button colors and saved it in the same folder under a different file name. However, when I launched Captivate and looked for my new skin in the drop down menu it wasn't listed. Now I'm confused. Can anyone tell me why my altered skin Flash files don't appear with the others? Any help would be welcome.
Thanks!

Hi there
Did you close and restart Captivate?
I ask because many things like this are read in when Captivate starts. So if it's left running (even with a project closed) it's unaware of changes until the housekeeping routines at startup read it in again.
Cheers... Rick
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

IDOC Segment missing for MATMASS Message type

Through change pointer program for the message type YAUIHUBMATMAS IDOC is triggered.
1) Change pointers are defined in system for the message type T Code u2013 BD52.
2) If respective field is changed in material master , this data is stored in change pointers table BDCP.
3) Background jobs are scheduled every day, which searches for the changes pointer table and triggers the idoc.
In our case IDOC is getting generated but with one segment missing.
We have analysed the succesful and failed IDOC and found desrepency is field updation of BDCP table.
Succesful case contain material number in object value of ZZMDST field where as failed contain some other value.
Can anyone please help us to guide how the BDCP table is updated and the values are mapped in it or any other suggestion to find why the segment is missing in it.
Regards,
Roshni.

Jürgen L. wrote:
> I have never seen a YAUIHUBMATMAS IDOC, nor a ZZMDST field .
> This seems to be home made.
>
> You are expecting that standard SAP programs are generating change pointers for your z-fields?
> Do you see a change history in material master for your z-field?
>
>
> follow the slution from this thread:
>
Yes ,This is a Z -field.
Change pointer is triggering the idoc fo this Z-field but in some cases one segment is missing .
This is z-field in the basic data view of material master.
Yes , we have checked the change history in material master for this field it is getting updated there in BDCP table as well but in BDCP table if this field is flagged then object value is not contain material number instead it contain some other number .
But in case of succesful IDOC the object value is same as material number.
Regards,
Roshni

IDoc Error: No recipient found for IDoc message type in the ALE model...

Hello Experts,
I just created an IDoc for purchase orders and when I try to test it after releasing
the PO, an error is shown in the processing log saying that there are no recipients
found for my message type of the IDoc. I refrenced it against a working IDoc but I might be
missing something.
Hope you can help me guys. Thank you and take care!

hi,
in bd64 ,goto change mode select ur distribution model and click add message type define ur logical systems and message type and save.
thn goto environment - partner profiles - f 8.it will show whether model is created or any errors.
then go back edit - model view - distribute.
reward points if hlpful.

Need help for new message type for PO archiving

Hello All
I have configured new message type ZARR for PO archiving process. After configuring all the steps this condition is not getting picked to by itself. And after maintaing it manually it is giving red flag without any error message. Here I am listing all the step that I have followed for config. Please help me am I missing something or any parameter is wrong.
Steps for new Message Type for PO Archiving
1.     Defined new Table 513 Purch.Org./Plant.
2.     Defined new access sequence Z513 Access Sequence for Archiving.
Following are parameters to the Access Sequence
Access Sequence Number = 21
Table = 513
Description = Purch.Org./Plant
Requirement = 101
Exclusive = Yes (box checked)
3.     Maintain Output Type ZARR for PO
General Data
Access Sequence = Z513
Access to condition (Checked)
Multiple Issuing (Checked)
Program = FM06AEND
FORM Routine = CHANGE_FLAG
Default Values
Dispatch Time = Send Immediately (when saving application)
Transmission Medium = Print Out
Storage System
Storage Mode = Archive Only
Document Type = ARCHIVE
Mail Title and texts
Language = EN
Title = Archiving for Legal Requirement
Processing Routines
Transmission Medium = 1 (Print Out)
Program = SAPFM06P
Form Routine = ENTRY_NEU
Form = ZJ_9H_MEDRUCK
Partner Roles
Medium = Print Out
Funct = VN
Name = Vendor
4.     Fine-Tuned Control: Purchase Order
Oprat. = 1
CType = ZARR
Name = Testing for Archivin
Short Text = New
Update Print Related Data = Yes (checked)
Oprat. = 2
CType = ZARR
Name = Testing for Archivin
Short Text = Change
Update Print Related Data = Yes (checked)
5.     Maintain Message Determination Schema: Purchase Order
Procedure RMBEF1
Step = 100
Cntr = 1
CTyp = ZARR
Description = Testing for Archivin
Requirement = 101
6.     Assign Schema to Purchase Order
Procedure RMBEF1
7.     Define Partner Roles for Purchase Order
Out. = ZARR
Med = 1 (Printout)
Funct = VN
Name = Testing for Archivin
Name = Vendor
8.     Test Condition Maintained in MN04 (Master Data)
Purch. Org. = 0001
Plant = 24
Partner Funct = VN
Medium = 1 (Printout)
Date/Time = 4 Send immediately (when saving application)
Output Device = HUL1
Storage Mode = Archiving only
Thanks
Ankit

the problem is the Exclusive = Yes indicator in the access sequence.
Your other message has this exclusive indicator as well.
so if the first message is found, then no other message wil be determined
to allow several messages in one PO, you must not set this exlusive indicator

Source files for sapjco3

Does anyone have access to/know how to get access to the source files for the sapjco library? In particular, I am seeking the .c files that were used to create libsapjco3.so. These are needed for an Android application that I am building.
Thanks!
Jim Daniel

Howdy Erhan,
The short answer is that using jco via mobile is a clean and easy interface, that doesn't involve web services. The entire point of my app (which is a PoC) is to avoid having to set up a .bsp or .jsp page and all the security concerns that comes with it. Using the jco package, you can "log-in" in an analogous manner to the SAP log-on. Again, it's clean, simple and easy.
Having access to the source files, whether in java or c, would be an immense help.
Thanks!
Jim

Source file for MSR

Hi All,
I m working on a PoC for MSR.I have downloaded the .war file for the same but i dnt have the source file for it.Where can i find the source code to change the customization.
Suggest some help.
Thx n Regards
Priyanka

Hi,
well, no, this is the only official way to do so. But if you have the WAR file - you should get the java files from the same destination.
Unfortunately you have to buy the product from SAP first to be allowed to download it from the destination in servicemarketpkace.
Regards,
Oliver

Create 2 outbound Idocs for 1 message type

Hi Experts,
We are sending an outbound Idoc of message type DESADV. We would like to trigger 2 Idocs per Shipping Notification.
Could you please help?
Thanks,
Vitish.

Hello Vitish
Each output partner can have it's own output. Also for the same message type. Maybe the 2 DESADV IDOC's are sent to different partners or destinations. But even when not you still can define 2 different output partners for the message type. Then 2 outputs will be triggered for the same message type.
Regards Jack

Creatintg Source File for GLMAST message type

Similar Messages

Maybe you are looking for