Creation and Change Date for Tcode and Function Groups

Hello All,
I need to display the Creation and Change Dates for Custom Tcodes and Function Groups in a Report. Can anyone please let me know the logic of retrieving it.
regards,
Mahesh

Hi,
TADIR and TRDIR is the tables where you can find all these data
Regards
Sudheer

Similar Messages

  • Sales Order creation/ change date for the items

    I have a unique scenario and i need to get a Report for this
    A sales order is created for 4 line items.
    Out of these , for 2 line items a delivery is created. I need the sales order creation date and time  for these 2 items in a custom report
    Now the other 2 items go in to some kind of block- Now these are released by going in the sales order VA02 and after releasing the delivery is created. Again for these two items , i need the sales order change date as after a user goes and changes the sales order to remove the block only then delivery is created for these two items
    Also another scenario is the 2 line items go for back order and when we get stock  at tht time system confirms the stock and then the delivery is created for these. So also for this when this change occured i need to get the date for these 2 line items
    Can any one please suggest how to get this data  from the scenarios?
    I dont want to get the date when the delivery is created as i can get tht from the LIKP table. I need the sales order create and change dates for these.

    You may be aware, any changes to a document will be recorded in CDHDR (for header changes) and CDPOS (for item changes).  You can explore these two tables.
    thanks
    G. Lakshmipathi

  • MIN and MAX date for each range

    Hi folks,
    I´ve got the following problem:
    Given a table
    create table t as select 'AT' OM_LANDTEXT, '12345' OM,
                             to_date('01-JAN-2004', 'DD-MON-YYYY') datum from dual
                             union
                             select 'AT' OM, '12345' OM_LANDTEXT,
                             to_date('02-JAN-2004', 'DD-MON-YYYY') datum from dual
                             union
                             select 'AT' OM, '12345' OM_LANDTEXT,
                             to_date('03-JAN-2004', 'DD-MON-YYYY') datum from dual
                             union
                             select 'AT' OM, '12345' OM_LANDTEXT,
                             to_date('05-JAN-2004', 'DD-MON-YYYY') datum from dual
                             union
                             select 'AT' OM, '12345' OM_LANDTEXT,
                             to_date('06-JAN-2004', 'DD-MON-YYYY') datum from dual
                             union
                             select 'AT' OM, '12345' OM_LANDTEXT,
                             to_date('01-FEB-2004', 'DD-MON-YYYY') datum from dual
                             union
                             select 'AT' OM, '12345' OM_LANDTEXT,
                             to_date('02-FEB-2004', 'DD-MON-YYYY') datum from dual
                             union
                             select 'AT' OM, '12345' OM_LANDTEXT,
                             to_date('03-FEB-2004', 'DD-MON-YYYY') datum from dual;
    SQL> select * from t;
    OM OM    DATUM
    AT 12345 01-JAN-04
    AT 12345 02-JAN-04
    AT 12345 03-JAN-04
    AT 12345 05-JAN-04
    AT 12345 06-JAN-04
    AT 12345 01-FEB-04
    AT 12345 02-FEB-04
    AT 12345 03-FEB-04
    8 rows selected.I need to have the first and last date for om and om_landtext for each date range (where "date range" means a set of consecutive dates with no gaps).
    So the ouput should be
    OM OM_LANDTEXT DATVON DATBIS
    AT 12345     01-JAN-04 03-JAN-04
    AT 12345     05-JAN-04 06-JAN-04
    AT 12345     01-FEB-04 03-FEB-04Any ideas...?
    Thanks for your help!
    Best regards,
    Gerd
    Message was edited by: Gerd
    Sorry, I forgot to mention this should be done in pure SQL if possible.
    [email protected]

    This is the plodding, methodical approach I've always taken, which leaves me somewhat in awe of Rod West's solution.
    SELECT om_landtext,
           om,
           MIN(datum) AS min_datum,
           MAX(datum) AS max_datum
      FROM (
    SELECT om_landtext,
           om,
           datum,
           prev_datum,
           COUNT(
             CASE
               WHEN prev_datum IS NULL THEN 'x'
               WHEN prev_datum != datum-1 THEN 'x'
               ELSE NULL
             END
           ) OVER (PARTITION BY om_landtext, om ORDER BY datum) AS grp
      FROM (
    SELECT om_landtext,
           om,
           datum,
           LAG(datum) OVER (PARTITION BY om_landtext, om ORDER BY datum) AS prev_datum
      FROM t
    GROUP BY
           om_landtext,
           om,
           grp;null

  • Creation and Modification dates for android file system

    Hello all, I am working on a project and i noticed a particular scenario where i'm getting an error everytime i try to run the code below on my android device;
                    var file:File=File.applicationDirectory.resolvePath("amf.js");
                    var modDate:Date;
                    var createDate:Date;
                     if(file.exists)
                            try
                                       modDate=file.modificationDate;
                                       credDate=file.creationDate;
                                       trace("Modification date: "+ modDate.toString()+"\nCreation date: "+credDate.toString());
                             catch(e:Error)
                                      trace(e.message+": Somehow android OS CANNOT READ mODIFICATRION AND CREATING DATES FOR FILES");
    Every time i run this on Adobe AIR's Mobile emulator, the correct dates are show up properly(Possibly because the emulator is running on Windows) but when i switch the debug to the device, the statement in the catch block executes. The real error says "Error #3003: File or directory does not exist."
    Am i missing something or is this a normal behaviour which i have to find a work around for? The modificationDate and the creationDate are all properties of the FileReference class which i didnt use to instanciate the file object because i wasnt uploading or downloading anything.
    Any form of tip will be much appreciated.
    Thanks.

    I run into the same problem while working on some sort of file synching task.
    Trying to read the file.modificationDate or creationDate results in an error: "Error #3003: File or directory does not exist."
    I have obeserved that this only happens for files that were packaged with the app (and placed in the File.applicationDirectory).
    Files that my app has downloaded and saved to the device (File.applicationStorageDirectory) do have a valid creation date and modification date.
    Maybe the File.applicationDirectory has different rights?
    Does anybody have a solution or workaround for this?

  • Change of method consolidation  - duable data for investment and equity

    Dear All!
    There are:  investor uniu - company A and investee unit - company B.
    Company A has had 50% share in company B to 01/2010. - Equity Method.
    Company A has added by 50% share in company B to 03/2010. - Puarches Method.
    I use activity of investment in AFD for investment and equity. :
    When I perform task consolidation of investment there is duble data for investment and equity.
    And when I perform task for Change to Consolidation Group I have message Process is not nessecery.
    Mabye you know why is process not nessecery?
    Thank you in advance for your help.
    Best regards,
    anka
    Edited by: Anka on Mar 25, 2011 5:07 PM

    Dear Sir,
    Thank you for your answer.
    Yes, I have task for change in group consolidation with documents in the posting level 02,12,22. I did not  data in group currency, when I task change in group consolidation, but only in local currency. My mistake.
    I have a new question:
    When I purchase new shares, which the activite of investment I must choose in AFD:
    - step aqusition or increase in capitalization?
    Thank you in advance for your help.
    Best regards,
    anka

  • What are the T-codes that contain the master data for material and vendor?

    what are the T-codes that contain the master data for material and vendor?

    hi ,
    - Display Material  tcodes...
    MM01 - Create Material
    MM02 - Change Material
    MM03 - Display Material
    MM50 - List Extendable Materials
    MMBE - Stock Overview
    MMI1 - Create Operating Supplies
    MMN1 - Create Non-Stock Material
    MMS1 - Create Service
    MMU1 - Create Non-Valuated Material
    ME51N - Create Purchase Requisition
    ME52N - Change Purchase Requisition
    ME53N - Display Purchase Requisition
    ME5A - Purchase Requisitions: List Display
    ME5J - Purchase Requisitions for Project
    ME5K - Requisitions by Account Assignment
    MELB - Purch. Transactions by Tracking No.
    ME56 - Assign Source to Purch. Requisition
    ME57 - Assign and Process Requisitions
    ME58 - Ordering: Assigned Requisitions
    ME59 - Automatic Generation of POs
    ME54 - Release Purchase Requisition
    ME55 - Collective Release of Purchase Reqs.
    ME5F - Release Reminder: Purch. Requisition
    MB21 - Create Reservation
    MB22 - Change Reservation
    MB23 - Display Reservation
    MB24 - Reservations by Material
    MB25 - Reservations by Account Assignment
    MB1C - Other Goods Receipts
    MB90 - Output Processing for Mat. Documents
    MB21 - Create Reservation
    MB22 - Change Reservation
    MB23 - Display Reservation
    MB24 - Reservations by Material
    MB25 - Reservations by Account Assignment
    MBRL - Return Delivery per Mat. Document
    MB1C - Other Goods Receipts
    MB90 - Output Processing for Mat. Documents
    MB1B - Transfer Posting
    MIBC - ABC Analysis for Cycle Counting
    MI01 - Create Physical Inventory Document
    MI02 - Change Physical Inventory Document
    MI03 - Display Physical Inventory Document
    MI31 - Batch Input: Create Phys. Inv. Doc.
    MI32 - Batch Input: Block Material
    MI33 - Batch Input: Freeze Book Inv.Balance
    MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
    MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
    MIQ1 - Batch Input: PhInvDoc. Project Stock
    MI01 - Create Physical Inventory Document
    MI02 - Change Physical Inventory Document
    MI03 - Display Physical Inventory Document
    MI31 - Batch Input: Create Phys. Inv. Doc.
    MI32 - Batch Input: Block Material
    MI33 - Batch Input: Freeze Book Inv.Balance
    MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
    MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
    MIQ1 - Batch Input: PhInvDoc. Project Stock
    MI01 - Create Physical Inventory Document
    MI02 - Change Physical Inventory Document
    MI03 - Display Physical Inventory Document
    MI31 - Batch Input: Create Phys. Inv. Doc.
    MI32 - Batch Input: Block Material
    MI33 - Batch Input: Freeze Book Inv.Balance
    MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
    MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
    MIQ1 - Batch Input: PhInvDoc. Project Stock
    MI21 - Print physical inventory document
    MI04 - Enter Inventory Count with Document
    MI05 - Change Inventory Count
    MI06 - Display Inventory Count
    MI09 - Enter Inventory Count w/o Document
    MI34 - Batch Input: Enter Count
    MI35 - Batch Input: Post Zero Stock Balance
    MI38 - Batch Input: Count and Differences
    MI39 - Batch Input: Document and Count
    MI40 - Batch Input: Doc., Count and Diff.
    MI08 - Create List of Differences with Doc.
    MI10 - Create List of Differences w/o Doc.
    MI20 - Print List of Differences
    MI11 - Physical Inventory Document Recount
    MI07 - Process List of Differences
    MI37 - Batch Input: Post Differences
    for vendor..
    XKN1  Display Number Ranges (Vendor)
    XK01  Create vendor (centrally)
    XK02  Change vendor (centrally)
    XK03  Display vendor (centrally)
    XK04  Vendor Changes (Centrally)
    XK05  Block Vendor (Centrally)
    XK06 Mark vendor for deletion (centrally
    XK07  Change vendor account group
    XK11  Create Condition
    XK12  Change Condition
    XK13  Display Condition
    XK14  Create with cond. ref. (cond. list)
    XK15  Create Conditions (background job)
    reward points if useful,
    venkat.

  • I woke up this morning and my Bookmarks is working different.  Has a setting changed, or did Apple change it for me and how do I get it back?????????

    I woke up this morning and my bookmarks are functioning different, and the tool bar has changed.  Instead of opening the bookmarks in a page on Safari, I get a menu on the side of the page.  Then I have to go click on the bookmark icon again to get rid of the menu.  Has a setting changed or did Apple change it for me and how do I get it BAAAAAAACK????????????

    The first G4 models were basically a repackaged/upgraded G3 & came in 350 & 400MHz models. This design was called PCI version. The next G4 models were AGPs. This link http://www.everymac.com/systems/apple/powermac_g4/index-powermac-g4.html has the specs/pictures of all the G4 models.
    Power Mac G4: How to Differentiate Between Models
    http://docs.info.apple.com/article.html?artnum=58418
    Power Mac G4: How to Differentiate Between Models (Part 2)
    http://docs.info.apple.com/article.html?artnum=42739
    Using these links, you should be able to determine which model you have.
    Removing the battery causes all settings in the internal memory to be reset, just like resetting the PMU/CUDA. See Mac PRAM, NVRAM, CUDA/PMU & Battery Tutorial
     Cheers, Tom

  • How to Get Each line item Create and Approval dates for a SHOPPING CART in SAP SRM (ABAP Programming)

    Hi All,
    I have to Get Each line item Create and Approval dates for a SHOPPING CART in SAP SRM. Either a table, or any Function module, Method, please let me know ASAP. Same i can use in my Program.
    Thank you Very much.
    Regards,
    Ramesh J.

    Hi,
    Refer the below wiki link it may help you.
    Product catlog configuration for ECC - CRM - SCN Wiki

  • Junked old macbook for a new one. changed apple id password from a different mac. i want to login and it asks for name and password. no matter what i type i cant seem to login. any way help?

    junked old macbook for a new one. changed apple id password from a different mac. i want to login and it asks for name and password. no matter what i type i cant seem to login. why cant i just enter my apple id and password. or is there a way to change whatever name and password are on the new one from another mac so i can login. anything helps...thanks

    Just open System Preferences>Users & Groups and unlock the preference pane with your root password.
    Set the New Account to be an Administrator and fill in the rest of the data and then click "Create User".
    I would suggest using this user to be YOU with admin capabilities. I wouldn't use the root user - too much damage could occur if you're not sure what you're doing. If you have files, etc., that you want to move to this account, simply but them in the Shared folder - or if you 'rescued' some old files and the like from your 'trashed' MBP, you can put them in your NEW admin account folders.
    Hope I've explained myself well - call back with any questions!
    Clinton

  • How to change data source name and context root during deployment

    Hi,
    Env:
    WLS 10.1.3
    JDev 11.1.1.6
    Hudson
    I need to deploy two instances of my ADF application on the same development enviroment. We are using Hudson to deploy. My question is how to change data source name and application context root before second deployment.
    Kuba

    I don't believe there is an inbuilt facility to do this.
    Previously how I've done this is when checking files out using Hudson jovs, before the build I then use an Ant extension called XmlTask (http://www.oopsconsultancy.com/software/xmltask/) to modify the required XML files.
    Can I ask why you're doing this in the first place please? Multi-tenancy? 2 versions of the same app?
    CM.

  • How do I change platform for downloading and installing Photoshop Elements from Windows to Mac?

    How do I change platform for downloading and installing Photoshop Elements from Windows to Mac?

    As long as your license supports both platforms you should only have to download the Mac version and install/activate using your serial number.  If you need help finding a link to download the file, please indicate the PSE version you need.

  • My iPhone 4 is Turning of and changing dates. How I can solve it?

    My iPhone 4 is turning off and changing dates Aline also. How I can fix it ?

    If the basics from the User Guide have all been tried (restart, reset, restore from backup, restore as new) and you still have problems, then you've done all the troubleshooting you can do.  You'll need to bring your phone into Apple or an authorized service provider in your area.

  • The table for storing data for infocube and ODS

    Hi all:
        could you please tell me how to find the table for storing data for infocube and ODS?
    thank you very much!

    Hi Jingying Sony,
    To find tables for any infoprvider go to SE11.
    In database table field enter the following
    Cube -
    Has fact table and dimension table
    For customized cube - ie cube names not starting with ' 0 '
    Uncompressed Fact table - /BIC/F<infocubename>
    Compressed fact table - /BIC/E<infocubename>
    Dimension table - /BIC/D<infocubename>
    For standard cube - ie cube names  starting with ' 0 '
    Uncompressed Fact table - /BI0/F<infocubename>
    Compressed fact table - /BI0/E<infocubename>
    Dimension table - /BI0/D<infocubename>
    Click on display.
    For DSO,
    For standard DSO active table- /BI0/A<DSO name>00.
    You use 40 for new table.
    Click on display.
    For customized DSO use- /BIC/A<DSO name>00.
    An easier way is in the database table field, write the name of the cube/DSO preceeded and followed by ' * ' sign. Then press F4 . It shall give you the names of the available table for that info provider.
    Double click on the name and choose display.
    Hope this helps,
    Best regards,
    Sunmit.

  • Start and End dates for users in Enterprise portal

    Hi Expert,
    I have to maintain start and end dates for around 200 users in 4 different Java systems. When I export the file of users it does not capture the validity fields. Is there a way/script to automate this? Otherwise I will have to do it manually.

    Hello
    Please check below URL for User Import Format:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/abdd83c3333205e10000000a42189c/content.htm?frameset=/en/48/a96f43db653206e10000000a42189c/frameset.htm&current_toc=/en/43/05e450d1cd6e95e10000000a11466f/plain.htm&node_id=2802&show_children=true#jump2822
    Regards,
    Tapan Goyal

  • How can I create a matrix question? Specifically, I need a question in table format that allows each respondent to list a number of events and then data for each event (date, location, number of participants, topics covered, etc.

    How can I create a matrix question? Specifically, I need a question in table format that allows each respondent to list a number of events and then data for each event (date, location, number of participants, topics covered, etc.

    Hi,
    Sorry, we do not support a matrix-question field.   Please try the multilines text field (where your participant can enter multiple lines in the input text box) and see if it works for you.
    Thanks,
    Lucia

Maybe you are looking for

  • Sending CPU Statistic report every 5 min.

    Hi All,      Can anyone tell me how can I send Router's CPU utilization report to a particular mail id in a certain time interval using event manager applet?

  • I need to reset my computer...what do I need to reinstall CS6?

    Hi, I need to reset my Macbook Pro to factory settings. How do I reinstall CS6? I have the serial key...is there a place I can go in my account to redownload it and enter the serial key? Do I need to do anything else?

  • WIP quantites in SAP

    Hello friends I have a question regarding WIP quantities in SAP, is it possible through some development or BADI to get WIP quanties for make-to-order or make-to-stock environment (manufacturing through production orders). As far as i know SAP associ

  • Old Problem of Hanging returned

    Back in March I couldn't get Premiere Pro to launch and it would always hang on the splash screen.  I haven't had to cut anything in 6 months but now I have a pressing job to do and I try to launch PP.  Initially it won't let me open my last saved ti

  • Active window property/m​ethod?

    Is there is property or method that will return whether or not a specific VI is the active (has focus) window? Thanks, Cristian