Creation of 1000 Cost Centres will slow down the system performance

Hi,
Can anyone suggest us, that if we create more than 1000 Cost Centres will there be any system/server performance issue in
SAP Business One.
Thanks,
Vishwa

Hi Vishwa,
               You are 50 % correct, Application performance may get slow but it won't clash.
               Because If you create 1000 of Cost Center, for each transaction system have to search and have to do the entry for corresponding cost center also. So there is a chance to get low performance. But application won't crash.
               Also you check other mean also like network configuration, protocol priority, cache memory size increasing, page fault size and others.

Similar Messages

Satellite Pro A10 - Does SP2 or 3 slow down the XP performance?

Hi,
I have a Satellite Pro A10 PSA15E which over the years had become very slow.
Recently I upgraded it's RAM from 256 to the maximum 1gb to try to speed things up but it did not help.
Next I reformatted the hard disc and reloaded the system using the Toshiba recovery disks. This worked fine and the system performance was excellent. However, with on-line security in mind, I loaded Windows SP2 ( with a view to subsequently go to SP3) and this has taken the system back to where I started - very, very slow, in fact pretty well unusable.
Does anyone know if Toshiba support SP2 and SP3 on this model of laptop?
If so how do you install them without killing performance?
Thanks in advance.

Hi!
I think SP2 or SP3 is supported on this Toshiba notebook because both Service Packs are contains really important security updates and I think this is not the problem.
If you install SP2 or SP3 you will also get the Security center and better Windows firewall. Maybe you should disable both services because the slow down the system performance (I always disable both services).
Just go to start => run => services.msc and disable both services and set the start up type to disabled.
Bye

I'm about to buy a 27" i-Mac. I would like to connect my 30" Cinema Display to it as a second monitor. What will I need to do that? Will this slow down the overal performance?

I'm about to buy a 27" i-Mac. I would like to connect my 30" Cinema Display to it as a second monitor. What will I need to do that? Will this slow down the overall performance?

The new iMacs do not come with a MiniDisplayPort, they have Thunderbolt, so unless you are talking about purchasing one of the previous generation iMacs such as this refurbished model in the online Apple store, it won't work. And yes, if you are going to get the full range of video resolutions you will need the Dual-Link version.
For details see the store's web page on the Dual-Link display adapter.

Hi, I am using an old PC P2 450Mhz, 256 MB Ram. Is ver 3.6.16 ok for my system or will it slow down the system? Thanks

Hi, I am using an old PC P2 450Mhz, 256 MB Ram. Is ver 3.6.16 ok for my system or will it slow down the system? NODD is the anti-virus. I am not happy with IE or goolge as these are taking too much space. Thanks

The system requirements for Firefox 3.6 are:
* Pentium 233 MHz (Recommended: Pentium 500 MHz or greater)
* 64 MB RAM (Recommended: 128 MB RAM or greater)
You exceed the minimum and are just short of the recommended processor. It should run OK but the only way to tell will be to try using it. Note that using add-ons can slow Firefox down, so if you start installing quite a few you may get performance issues.
https://www.mozilla.com/en-US/firefox/3.6/system-requirements/

Select statement from bkpf slows down the system

hi guys,
i have this syntax for this coding:
        SELECT * FROM bkpf
         WHERE bukrs = ekko-bukrs
           AND awkey = xawkey
           AND gjahr = i_ir-budat(4)
           AND blart = 'RE'.
        CLEAR: titab.
        titab-ebeln = itab-ebeln.
        titab-ebelp = itab-ebelp.
        titab-budat = bkpf-budat.
        titab-bldat = bkpf-bldat.
        titab-xblnr = bkpf-xblnr.
        APPEND titab.
     ENDSELECT.
this coding really slows down the report seleection and sytem , can anybody advice on how to select the better way

Hi Ester,
First you need to avoid the select and endselect statement by using SELECT INTO TABLE.
Second issue is u are using non-key fields in where conditions are aweky, belnr and u r not using the belnr which is first key-field in the BKPF table.
Third one is try to use the fields in correct order which it is in table say in ur where codition it should be like bukrs, gjahr, blart, awkey,....
if you dont have a input field BELNR and u need to do really improve the performance with these input fields wht you have, its is better to create Secondary index with proper sequence for felds.
But i am not sure to give permission to create secondary index bec it takes more memory occupation like what exact BKPF tbale contains, you need to permission from client people along with BASIS people.
i am give sample code :
SELECT * FROM bkpf " try to specify the internal table with exact fileds instead '*'
    into table tbl _ bkpf
WHERE belnr = w_belnr
and    bukrs = ekko-bukrs
AND gjahr = i_ir-budat(4)
AND blart = 'RE'.
AND awkey = xawkey.
If sy-subrc = 0.
sory tbl_bkpf by belnr.
endif.
Let me know if any doubts.
<b>Reward with points if useful.</b>
Regards,
Vija

The little gear wheel keeps appearing thus slowing down the system

My system is being slowed down by the appearance of the little gear wheel turning around & around.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Does LUKS encryption slow down the system?

How fast is the system after you encrypt / and /home partitions? Does anybody notice any difference compared to unencrypted partitions?
I'm thinking about encrypting partitions, but for speed reasons I don't know should I encrypt just /home or also the / partition.
I found nothing on LUKS homepage.

Technically it must be a little slower, but I never could notice it at all. If you do try it, watch top while you're working, the amount of CPU used by "kcryptd" is basically the amount of power you're giving up.

Is there a plug-in that will slow down the speed that a game plays on FFox?

I upgraded from XP to Windoze7, & now a online game plays much too fast. Is there a plug-in, or other way to fix the "problem"?
If it will help, this is a link to the game: http://www.gamesbrigade.com/play/xform.sniper-team

Go to the
'''''[https://addons.mozilla.org/en-US/firefox/ Mozilla Add-ons Web Page]'''''
(There’s a lot of good stuff here)
and look around.

Mid 2007 iMac 2.4GHZ. after start up the iMac will slow down to a freeze. Specially while on internet (youtube).

mid 2007 iMac 2.4GHZ. after start up the iMac will slow down to a freeze. Specially while on internet (youtube).

See:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
How to Speed up Macs,
Macintosh OS X Routine Maintenance,
Mac troubleshooting: What to do when your computer is too slow,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths and
Myths of required versus not required maintenance for Mac OS X for information.

HT1338 M using iphone 4s... So is it compatible to upgrade it to ios7? Will it have any prob or slow down the cell?

M using iphone 4s... So is it compatible to upgrade it to ios7? Will it have any prob or slow down the cell?

DPranav wrote:
.. using iphone 4s... So is it compatible to upgrade it to ios7? .
Yes.
See the very end of this link for Compatible Devices and Features...
http://www.apple.com/ios/ios7/features/
DPranav wrote:
... Will it have any prob or slow down the cell?
Research using google.

Outlook contacts how many will work with out slowing down the search

My new iphone will slow down or freeze when I look up a contach.
I have 8000 contacts, too many for the iphone to work?

Hello ofrills
The Samsung Rugby II unfortunately doesn't work on our network. It is set up to work only on AT&T's technology. The good news is we have several durable phones available. You can purchase a Verizon device and activate it on your line without a contract.
Here's an example: if your friend had a Verizon device that wasn't activated on a line. You could activate it under your telephone number without a contract extension. If you bought a Verizon device from a third party we could also activate it on your line for you.
Here's a link to our certified pre own device without a 2 year contract: http://www.verizonwireless.com/b2c/store/controller?item=phoneFirst&action=viewAllPhones&deviceCategoryId=5
Please keep in mind signing a two year contract with us will greatly reduce the price of your new device. That time goes by very quickly. We have the best network and an awesome selection of phones!
Thank you
JoeL_VZW
Please follow us on twitter @vzwsupport

Boot drive in Bay 3 or Bay 4 will it slow down the startup process?

If I have my boot drive in Bay 3 or Bay 4 will it slow down the startup process? I know in old PCs it would look for the boot drive by looking each time in a certain order. If the MP did that then it would probably look at Bay 3 and Bay 4 last on its ordered sequence.

But.... I think there is a but here... Mac OS does still look for other boot drives none the less.
On a PC, most have an option in the BIOS to set the device types (CDROM, hard drive, USB). and the order of hard drives to look. Meaning that I can have a system on a hard drive that is off line, pop it in, make it the primary boot device and boot from it, and boot quickly.
Sometimes people will disable a chipset or not enable hardware RAID on the motherboard.
Startup Disk control panel sets the boot path in nvram and even if you do have 4 boot drives in Mac Pro, it should still boot in 20-45 seconds.

If my SSD on my Air is almost full, will it slow down the computer?

If my SSD on my Air is almost full, will it slow down the computer? As in, if I have about 20GB left on my SSD, will the computer run slower?

Rule of thumb tends to be that you should set aside 10% of disk space for SSDs for the best speed. This comes from SSDs in Windows PCs, where the SSDs do perform more slowly when full rather than having some free space. This is just how SSDs work, which I won't get into the technicalities of. The SSD controllers themselves allocate set a reserve space (this could not be true in Apple's case, depending on what chips they use), but generally the more free space the better. So 64GB should set aside 6GB, 128GB should set aside 12GB, and 256GB should set aside 25-26GB.
SSDs technically will never be as fast as when you first got it. They slow down as soon as you start to write data to them, but the slowdown will be negligible. It's still faster than a HDD at the end of the day.

Audio will slow down with speed change, but not speed up

I'm using FCP 6.0.6 and am trying to adjust the speed of an audio clip and some odd things are happening.
If I change the speed of a clip to, say, 130%, the clip shortens appropriately, but the audio don't change. It just crops it off. And in the speed dialog box, the drop down menu is grayed out and Constant Speed is chosen.
If I choose to slow down the clip, to say 75%, everything seems to work. The audio is slowed, the clip lengthens, but then I can't change it to anything else. It says slow regardless of any adjustments in the speed dialog box. I have to go back through "Undo"s to get it to change.
Am I doing something wrong? I read some questions about this with people using FCP 7 and that seems like how mine should be working.
Thanks in advance,
Mark

Well, it is an .AIFF file converted from .WAV in Quicktime. It is 187.5 megs and has a datarate of 344.5 k/sec. It is stereo at 44.1K and has a 32-bit Floating point.
That help? I actually just was able to do the time compression in Soundtrack Pro. But I'm sure I've done it in the past directly in FCP.

How can i fix my mac book pro i bought in mid 2010, it is slowing down. the pin wheel does spin a alot.

how can i fix my mac book pro i bought in mid 2010, it is slowing down. the pin wheel does spin a alot.

try this;
open disk utility - verify disk permissions - repair disk permissions if errors are found. might take an hour or less - depending on how much errors needs to be repaired.
restart your macbook and see if that sorts it out for you.
also check your hard drive space. if your hard drive is almost full, that will also contribute to your macbook getting slower....
good luck

Creation of 1000 Cost Centres will slow down the system performance

Similar Messages

Maybe you are looking for