Creation of a new document from the output of another document.

Hi all
here is the scenario, If we are creating an debit memo request and debit memo to a customer, from the output of this debit memo we need to trigger the creation of another document( Ex credit memo to other customer) automatically, how we can do this?

Hi,
There is a simple solution provided by SAP to trigger the BILLING DOCUMENTS for Deliveries
This is a standard process
Setup a Job in SM36 for the program SDBILLDL and it will pick all the delivery document which are open on that particular Billing date
and process the Billing documents
Alternatively you can also create the IDOC to trigger the BILLING DOCUMENTS
For which you need to setup the PARTNER PROFILES, MESSAGE TYPES, PORT, RFC DESTINATION, SEGMENT CREATION,
But i would suggest you to go with the standard program to create the Billing documents
regards,
santosh

Similar Messages

How to create new documet from the output of another document automatically

Hi all
here is the scenario, If we are creating an debit memo request and debit memo to a customer, from the output of this debit memo we need to trigger the creation of another document( Ex credit memo to another customer) automatically, how we can do this?

Hi Dev,
You need to create another report program for the other document along with the smartform.
In the report program, you have to put your logic on how the other document has to be found when your document is created and the output be triggered.
So in principle,
There will be two programs linked to your output type.
One will create the output of the document which is being created,
Another program will automatically call the other target document in change mode and trigger the same output, during which the second program will be executed.
Now the second program will create the output for the second document.
Making copy controls wont help for this reqmt.
Reward points if it helps.

Can you retrieve document from the output folder?

OK, this was a stupid thing to do, I know. But I'm hoping there is a solution.
I spent the past two days editing a 600+ page document that I produced using the Printed Documentation SSL. Unfortunately, I didn't copy it out of the output folder. This morning, I inadvertently started to run the same SSL, but cancelled before it had a chance to generate. Too late. The "Clearing Output Folder" line already appeared in the log.
Is there a way to retrieve the file once RoboHelp "clears" it? At the moment, there is no file with that name in the output folder.
Any help you could provide would be much appreciated.

Hi there
I'm a simpleton at heart.
Before attempting to resort to installing another application, have you looked inside the Recycle Bin?
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 moments from now - $24.95!
Adobe Certified RoboHelp HTML Training
SorcererStone Blog
RoboHelp eBooks

Create a new DB from the backup of another DB on the same server

Hi,
in MAX DB 7.6 on Win 2003.
Can we copy an instance to another instance , when both are on the same server ? How ?
MY Prod DB and Dev DB are on the same server. How can I copy the Prod into the Dev DB using Backup of Prod ?
Thank you.

Ok, thank you .
dbmcli.exe on MAXDB4>db_activate RECOVER DemoDataCompl_recover
OK
Returncode              0
Date                    20111107
Time                    00133125
Server                  optim65-win.com
Database                MAXDB2
Kernel Version          Kernel    7.6.06   Build 010-123-229-880
Pages Transferred       618
Pages Left              0
Volumes                 1
Medianame               DemoDataCompl_recover
Location                E:\sdb\data\wrk\MAXDB2\completeDataJan
Errortext
Label                   DAT_000000004
Is Consistent           true
First LOG Page          30536
Last LOG Page
DB Stamp 1 Date         20111104
DB Stamp 1 Time         00094855
DB Stamp 2 Date
DB Stamp 2 Time
Page Count              606
Devices Used            1
Database ID             optim65-win.com:MAXDB2_20111104_094855
Max Used Data Page      0
Converter Page Count    8
dbmcli.exe on MAXDB4>RECOVER_replace DemoDataINC_RECOVER
ERR
-24988,ERR_SQL: SQL error
-104,DBM command impossible at this time
Regards.

Just bought a new iMac and it is telling me it will take 27 hours to transfer documents from the old one!! Is this normal? Can I speed this up some how??

I just bought a new iMac and it says it will take 27 hours to transfer documents from the old mac! Is this normal? Can I speed this up??

If you are transferring with Wi-Fi or Ethernet and you have to transfer a lot of files, it's normal. Wi-Fi and Ethernet are the slowest methods to transfer files.
Instead, you can check if your old Mac has got a FireWire 800 port. If so, you can get a Thunderbolt to FireWire adapter and a FireWire cable, so the transfer will be done by FireWire, making the migration faster.
If you don't want to spend money, continue the migration. Another thing you can do is to get an external drive, make a Time Machine backup of your old Mac and use the backup to transfer your files to the new Mac. Read > http://support.apple.com/kb/HT4889?viewlocale=en_US&locale=en_US

How do you open a new document from the template chooser?

Hi There,
Since upgrading to Yosemite, I can't find the option to open a new document from the template chooser. When I type in "template" in the help box it shows it under "file" But when I click on "File" I don't see that option.
Basically, I'm trying to ask how do you access the templates in the new pages?
Thanks so much

Check your preferences and make sure Show Template Chooser is selected:
Then just choose New from the File menu.

Pop up window says need to upgrade to newer version to work on document from the cloud. go to app store and it says already installed...help

pop up window says need to upgrade to newer version to work on document from the cloud. go to app store and it says already installed...help. Am trying to work on document from office computer at home on laptop.
This is what the pop up says:
You need a newer version of Numbers to open this spreadsheet.
You can download the latest version of Numbers from the Mac App Store.
Thanks,

WS,
At first, it can be difficult to determine which version of Numbers you are using. The user interfaces are different, but if you are new to the apps you may think you are using the new version when if fact you have launched the older version. Make sure you are using Version 3.x. Then you won't get the message that you need a newer version.
Use Spotlight to launch Numbers. After typing Numbers into the search field, pick the result that says "Numbers -- Applications".
Jerry

How do I save documents from the new Pages into a Word Document

How do I save documents from the new Pages into a Word Document?

Thank you so much - so simple! I had been using the 'share' option (worked in old Pages) and only had icloud or email as options. I have to attach word documents to emails to send to work. I don't want to use icloud because it's too public and I don't trust it. Also, you have to be able to access the internet and I need word documents on my USB stick for work where there's no internet.
I love my Mac but I do wish Apple would remember those of us living in less-than-perfect computer-land.
Thanks again
Lindsay

The documents didnt migrate to my new MacMini from the old one

My documents didn't migrate to my new MacMini from the old one. How do I get them back?

connect the two Macs with a firewire cable, boot the source Mac in Target Disk Mode, and copy whatever you need to the new Mac.

Is there a way to open a new window from the "Go" menu in Mavericks?

Before Mavericks, I was able to go from the Finder to the top menu "Go" -> "Utilities", or Applications or Home… and a new window would open.
Now I have to manually open a new window to avoid loosing my existing window.
Is there a way to open a new window from the "Go" menu?

Before Mavericks, I was able to go from the Finder to the top menu "Go" -> "Utilities", or Applications or Home… and a new window would open.
Now I have to manually open a new window to avoid loosing my existing window.
Is there a way to open a new window from the "Go" menu?
First, as others have already stated.....make sure the checkbox is deselected for "open folders in tabs instead of windows" in Finder Preferences.
If you're like me and don't like tabs very much, there is a way to make folders always open in windows with a simple click (I'm using Mavericks 10.9.5). Go to a root folder (for example, the Documents Folder), open it, and select View > Hide Toolbar, then all folders within that root folder will open in a new window.
As an alternative method, any folder can be opened in a new window by holding down either Command Key while clicking the folder. But sooner or later you will forget to hold down that key, and then clicking on a folder will open in a tab (which will automatically resize the window and cause much aggravation).
The Hide Toolbar trick will also work with any folder present on the Desktop. It will make all folders inside that folder open in new windows.
To make the Applications Folder open in a new window when opening it from the menu bar at the top of the screen, you will have to open the main hard drive folder and use the Hide Toolbar trick. This will cause all folders inside it to open in new windows.
Hope this helps.

How do I remove "Recent Items" Documents from the apple menu?

I've been searching for an answer to this question for the better part of 3 hours now. W
Several iterations of osx ago, there was the ability to separately limit how many recent items were shown for Applications, Documents and Servers. Over the years, I simply installed a newer version of osx on top, and surprisingly my recent items always eliminated the Documents from the list.
I've since done a clean install of mavericks after installing an SSD, and i've lost this small but important part of my work flow. No matter what I've tried to remove the documents from Recent Items, it always shows up. I can still boot into my old HDD (which is now installed as a supplementary drive and also updated and running mavericks 10.9.2), and see from clicking on the Apple Menu > Recent Items that it only displays Applications and Servers.
Try as hard as I can, I can't simply figure out how to remove the documents from the recent items menu. I've tried editing the com.apple.recentitems.plist file, to show 0 items for documnets, but this never seems to work. (I've since read that this file is simply rewritten on logout.) Strangely, if I go into the old setup System Preferences, Recent Items: it is showing as None. I also suspect that maybe I used Tinker Tools or some other utility to change some command line preference (using the gui) several years back. Not sure how I could investigate what would need to be done to compare files or otherwise figure out how to remove the documents section from the recent items menu.
It's starting to drive me crazy. Anyone?

The Apple menu is at the top left hand corner of your screen, click on it and about this Mac is the first choice.
Click twice on Version to get serial number.

Import or load a new logo from the external system

Hi all...
I want to import or load a new logo from the ext system helps to generate for my ALV report program(for top-of-page)......the one from SE78 is not working for me if i do import or with pre-defined one......
pls revert me on urgent basis....(help need esp., for ALV report generation)
thanks
sankar

Hi,
In the transaction OAOR, you should be able to insert your company Logo.
GOTO - OAOR (Business Document Navigator)
Give Class Name - PICTURES Class Type - OT..... then Execute
It will show you the list, then select ENJOYSAP_LOGO.
On that list, you will find one control with a "create" tab.
Click std. doc types.
Select SCREEN and double-click.
It will push FILE selection screen.
Select your company logo (.gif) and press OK.
It will ask for a description- for instance: "company logo".
It will let you know your doc has been stored successfully.
You can find your logo under ENJOYSAP_LOGO->Screen->company logo.
Just run your ALV program, you should find your company logo in place of the EnjoySAP logo.
FORM TOP-OF-PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = HEADING[]
I_LOGO = 'ENJOYSAP_LOGO'
I_END_OF_LIST_GRID ='GT_LIST_TOP_OF_PAGE'.
ENDFORM. "TOP-OF-PAGE
Here 'ENJOYSAP_LOGO' will replace by ur created logo.
n pls reply me.
Refer this link
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_enhanced.htm
http://www.sap-img.com/abap/alv-logo.htm
http://www.sap-img.com/fu002.htm
reward if it helps..
Regards,
Omkar.

Display a Word Document in the Output

Hi All ,
I would like to display a word document in the Output .
I cheked the demo application 'ZIOS_TEST_SIMPLE_MS' , but i am not able to see the Word Document in the output.
Do we need to do any settings or configuration to be done to use these controls ?
Thank You ,
Radhika.

You might want to add a browser layer over your flex
application and let the browser manage the file types. I personally
use the HTML component from
http://drumbeatinsight.com/.

Process blocked sales and distribution documents from the SAPoffice inbox

Hi,
I know VKM1/VKM3 can be used to release order.
And SAP help shows we can process blocked sales and distribution documents from the SAPoffice inbox. Could anyone tell me how?
I can use output type KRML to send a mail to SAPoffice inbox, but don't know how to release blocked sales orders in the SAPoffice inbox.
Many Thanks
Jean

Hello Jean,
Release the blocked document directly via mail received:
- After carry out the step 4 in note 677377, you will be able to
release the blocked document directly by:
Display the SAP office mail recieved;
Menu: Document -> Execute;
Then you will be redirected to transaction vkm3, with the blocked
document number defaulted on that screen;
Unfortunately, it is not possible to direct your mails to Outlook
and release the document from VKM3.
Best regards,
Lela

Printing few documents from the query results

Hi,
I need to add a new functionality of marking few documents from the search results and print them (the web viewable files (PDFs in most cases)).
We are working with UCM 10g.
Is there any OOTB solution for printing via content server? is it available for batch of documents?
Any suggestions for solution are welcome.
Thanks In advance ,
Nir

Is there any OOTB solution for printing via content server? is it available for batch of documents? To my best knowledge, no. Oracle has some products in its application stack to support printing. I think one of them was called Documaker.

Creation of a new document from the output of another document.

Similar Messages

Maybe you are looking for