Creation of an enhancment Point

Hi all,
We are creating an Enhancement-Point for an include RV15CI03. This include has several main programs. The one that we want to use is,RV15C002.
When we create an Enhancement-Point, the COMPILATION UNIT is set to RV15C002 automatically.
Is there a way to change the compilation unit for this point as "Multiple_use Include".
Points guaranteed for helpful answers
Best Regards,
Ram.

Hi,
I dont see a point in having this statement
swc_set_table event_container 'INTERNAL_TABLE' t_cnp_container. Infact it is not needed !!
SWE_EVENT_CREATE like any other FM, take a
lt_var type standard table of SWCONT.
ls_var type SWCONT.
fill your ls_var with all fields and append it to lt_var each time and pass lt_var to event_table of SWE_EVENT_CREATE. It should work !!
However, suggested way is to use SAP_WAPI_CREATE_EVENT instead of SWE_EVENT_CREATE from ECC 5.0 onwards. There are fe concerns with SWE_EVENT_CREATE mainly with respect to commit and persistancy. Better we should use SAP_WAPI* as much as possible from ECC 5.0.
Try above and Good Luck !!
Regards
Krishna Mohan

Similar Messages

Enhancement point in billing doc creation at invoice number generation

I need to find an enhancement during billing document creation.
This is my requirement.      Within function module RV_INVOICE_DOCUMENT_ADD, standard SAP determines the invoice number using Function Module NUMBER_GET_NEXT. now, there is an enhancement point available immediately after the standard SAP invoice number has been determined.
I need to find that enhancement point.
Please advice what enhancement points are available at this point.
Any advice is appreciated. Thanks in advance..

Hi
Here is a little program that when you type in the t-code it will give you all the user exits available.
<Code>
*& Report Z_FIND_USER_EXIT *&
REPORT z_find_user_exit NO STANDARD PAGE HEADING.
TABLES : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
TABLES : tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) text-001.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR' AND object = 'PROG' AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
    SELECT SINGLE * FROM trdir WHERE name = tstc-pgmna.
    IF trdir-subc EQ 'F'.
      SELECT SINGLE * FROM tfdir WHERE pname = tstc-pgmna.
      SELECT SINGLE * FROM enlfdir WHERE funcname = tfdir-funcname.
      SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR'
                      AND object = 'FUGR'
                      AND obj_name EQ enlfdir-area.
      MOVE : tadir-devclass TO v_devclass.
    ENDIF.
ENDIF.
SELECT * FROM tadir INTO TABLE jtab WHERE pgmid = 'R3TR'
                      AND object = 'SMOD'
                      AND devclass = v_devclass.
SELECT SINGLE * FROM tstct WHERE sprsl EQ sy-langu
    AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transactie Code - ', 20(20) p_tcode, 45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
    WRITE:/(95) sy-uline.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 sy-vline, 2 'User exit', 21 sy-vline , 22 'Omschrijving', 95 sy-vline.
    WRITE:/(95) sy-uline.
    LOOP AT jtab.
      SELECT SINGLE * FROM modsapt WHERE sprsl = sy-langu
        AND name = jtab-obj_name.
      FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
      WRITE:/1 sy-vline, 2 jtab-obj_name HOTSPOT ON, 21 sy-vline , 22 modsapt-modtext, 95 sy-vline.
    ENDLOOP.
    WRITE:/(95) sy-uline.
    DESCRIBE TABLE jtab.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'Aantal gevonden user-exits:' , sy-tfill.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'No user-exit Found'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transactie code bestaat'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
<Code>
Hope it helps.
Regards
Vic

Enhancement Point Creation in Internal table

Hi,
I want to create a Enhancement Point in Internal table declared in Customize Program.
This is more related to clarification of concept related to Enhancment Point.
But when i am putting the cursor inside the internal table and right click and Enhancment -> create ,it is giving me a message
that "Position of enhancement section/point statement is not allowed".
This means that we can't create Enhancement point or Enhancement Section inside the Internal table and solution is we can use
only Implicit Enhancement point.
But the doubt is that i had seen SAP programs where they have created the Enhancement point in the internal table declarations.
How that is possible then?
Please provide your helpful answers to get me more clarification on Enhancement Point/
Thanks,
Manish

Hi Afzal,
Below is the code from standard program :-
DATA: BEGIN OF lbbes OCCURS 10,        "Tabelle für LB-Bestände
        lifnr LIKE ekko-lifnr,
        matnr LIKE mdpm-matnr,
        werks LIKE mdpm-werks,
        charg LIKE lifbe-charg,        " SC-batch: Key-Feld
        lgort LIKE resb-lgort,         " SC-batch
        lbmng LIKE lifbe-lblab,        "LB-Bestandsmenge
        erfmg LIKE mdpm-bdmng,         "Verfügbare Menge
        erfme LIKE mdpm-lagme,         "Basismengeneinheit
        wamng LIKE mdpm-bdmng,
        waame LIKE mdpm-lagme,
        vstel LIKE tvstz-vstel,
        ladgr LIKE marc-ladgr,
        sernp LIKE marc-sernp,
        lblfa LIKE t161v-lblfa,
        bdmng LIKE mdpm-bdmng,   "sum of dep. requirements from SC POs
        bdbam LIKE mdpm-bdmng,   "sum of dep. requirements from SC req's
        rsmng LIKE mdpm-bdmng,         "sum of transfer reservations
        slbbm LIKE mdpm-bdmng,   "sum of third-party SC requisitions
        slbmg LIKE mdpm-bdmng,         "sum of third-party SC POs
        lfimg LIKE komdlgn-lfimg,      "sum of open deliveries
        maktx LIKE mdpm-maktx,
        selkz LIKE sy-calld.
ENHANCEMENT-POINT rm06ellb_03 SPOTS es_rm06ellb STATIC.
$$-Start: RM06ELLB_03----
$$
ENHANCEMENT 3 /CWM/APPL_MM_RM06ELLB.    "active version
DATA:   /cwm/waame LIKE mdpm-lagme,
        /cwm/lbmng LIKE lifbe-lblab,    "LB-Bestandsmenge in ParallelME
        /cwm/erfmg LIKE mdpm-bdmng,     "Verfügbare Menge in ParallelME
        /cwm/erfme LIKE mdpm-lagme,     "ParallelME
        /cwm/meins LIKE mdpm-lagme,     "CW-BasisME
        /cwm/bdmng LIKE mdpm-bdmng,     "sum of dep.req.< SC POs in PME
        /cwm/lfimg LIKE komdlgn-lfimg, "sum of open deliveries in PME
        /cwm/rsmng LIKE mdpm-bdmng,     "sum of transfer reservations
        /cwm/slbbm LIKE mdpm-bdmng, "sum of third-party SC requisitions
        /cwm/slbmg LIKE mdpm-bdmng,     "sum of third-party SC POs
        /cwm/bdbam LIKE mdpm-bdmng. "sum of dep. req´s from SC req's
ENDENHANCEMENT.
$$-End:   RM06ELLB_03----
$$
DATA:
      END OF lbbes.
Now in the internal table lbbes they have created the enhancement point and in implementation of enhancement point they have declare some extra fields.This is not a implicit enhancement but it is a explicit enhancment implementation with the help of enhancement point.
Similarly if i have to do in my customize program then how to go ahead?
I knew that it is possible with Implicit Enhancement point and i can implement that also.
Let me know your views about this.
Thanks,
Manish

Enhancement Point Creation

Can we create our own enhance point in standard program ie I want to create a point where i need to change & implement the new logic at that point.plz suggest

Hi ,
You can create your own enhancement points.Go to the standard report in which you want to add your own code.Press SHIFT + F4, ths standard code will come in Edit mode , but you can not edit it.
Now goto
EDIT ->Enhancement operations ->Show Implicit Enhancemet Options.Yellow lines will come at few places.These are the points where you can create your own enhancement points and add your code.You need to figure it out , where you can add your code. Right click on the yellow line ->enhancement implementation -> create, here you will be asked whether you want to create declaration or write your code.At the begining of the enhancement point you need to write declarations.
At the end of the enhancement point , again follow same procedure , here you need to write your code logic.
And then you have to activate the enhancement point.
Hope it helps
Edited By
Tejaswini Khante

Enhancement point in F.14 Transaction

Hi All,
I have a requirement to capture the recurring entries posted through transaction F.14 and maintain it in a separate custom table.
In order to achive this I need an enhancement point after posting of teh recurring entry is successfull in F.14 transaction.
Can anyone help me in finding the same.
Regards,
Ashwini

hi
good
Following user exits are present in MIRO
LMR1M001 User exits in Logistics Invoice Verification
LMR1M002 Account grouping for GR/IR account maintenance
LMR1M003 Number assignment in Logistics Invoice Verification
LMR1M004 Logistics Invoice Verification: item text for follow-on docs
LMR1M005 Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006 Logistics Invoice Verification: Process XML Invoice
MRMH0001 Logistics Invoice Verification: ERS procedure
MRMH0002 Logistics Invoice Verification: EDI inbound
MRMH0003 Logistics Invoice Verification: Revaluation/RAP
MRMN0001 Message output and creation: Logistics Invoice Verification
thanks
mrutyun^

Enhancement Point in MIRO transaction

Hi all,
Can anyone let me know the enhancement point in t-code MIRO before saving the document. Plz let me know if there is any enhancement spot.. plz help me out in this issue.
Thanks in advance.

hi
good
Following user exits are present in MIRO
LMR1M001 User exits in Logistics Invoice Verification
LMR1M002 Account grouping for GR/IR account maintenance
LMR1M003 Number assignment in Logistics Invoice Verification
LMR1M004 Logistics Invoice Verification: item text for follow-on docs
LMR1M005 Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006 Logistics Invoice Verification: Process XML Invoice
MRMH0001 Logistics Invoice Verification: ERS procedure
MRMH0002 Logistics Invoice Verification: EDI inbound
MRMH0003 Logistics Invoice Verification: Revaluation/RAP
MRMN0001 Message output and creation: Logistics Invoice Verification
thanks
mrutyun^

Difference between implicit and explicit enhancement points

Hi Folks,
I had learned many documents to findout the difference between explicit and implicit enhancement point.I got the theoritical knowledge on that but losing on the practical side..
Can anybody help me out with one real time scenario where the explicit enhancement points have been implemented and the step by step procedure to implement it..
Hoping for the positive response from you..
Regards,
Rohan.

Hi Rohan,
In implicit they are available at the beginning of subroutines defined in the standard reports.
Edit-> Enhancement operations->show implicit enhancement options.
This will highlight all the implicit enhancements in the report.
In Explicit enhancement we have two different types of enhancements -
Enhancement point and Enhancement section.
Enhancement point - SAP has some standard functionality defined for a report , but it may be required that you'll need to add your own code. In this case the code that you'll add will be executed along with the standard code.
Enhancement section - SAP has its standard functionality defines but it may not suit your requirement, in that case you may need to add your code and you'll need that code to be executed only. By this method the existing code is automatically commented and a copy of the same code is available to edit.
After executing the report only your code will be executed and the standard code will be bypassed.
For Practicle implementation, follow this link.
Link : [http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bb54c452-0801-0010-0e84-a653307fc6fc]
i hope it will give you some clear picture....
Thanks.
Anurag

Enhancement points option: Function modules or BADI

Hi, I am on ECC 6.0 and I need to validate and set some requirement in customer sales area data when user input the document output message in Documents tab strip screen 7003 of sapmf02d in transaction XD01 or XD02.
I found that there is function module EXIT_SAPMF02D_001 that I probably can use to create an implicit enhancement point to validate table T_KNVD or I can use BADI customer_add_data. Can someone suggest which way is better and why? I am new to this so could someone show me screen by screen on how to create and implement BADI.
I am confusing about should I create a ZBADI or using existing BADI customer_add_data. If I use existing BADI how can I add my own method with my own code.
Thanks.

Thanks. Could you explain to me how does the custom BADI get call to execute my code? Say
I have a customer document screen 7326 (Customer Master Subscreen SD Documents in program SAPMF02D). What I want is when user click save, I want to do some validation on the output message that they enter and issue some warning or error messages.
I am on ECC 6.0 so I can create a BADI from Enhancement spot not from SE18. SAP has a BADI called CUSTOMER_ADD_DATA with class CL_EX_CUSTOMER_ADD_DATA and interface IF_EX_CUSTOMER_ADD_DATA.
When I create a ZBADI_CUST, which interface class I put in the IF_EX_CUSTOMER_ADD_DATA
or a ZIF_EX_XX so that I can create my own method? How does the BADI get called when I am in transaction XD02 and click the save button? Could you kindly show me step by step the procedure.
Thanks.

How can I get the Microsoft enhanced Point and Print compatibility driver installed on Win7 LC master?

We recently migrated from a Windows Server 2003 to Windows Server 2012 print server. When recomposing a linked clone pool with the old 2003 server, drivers were taken care of for the printer when the user printed for the first time after desktop recompose. With 2012, any printer using the Point and Print driver doesn't seem to obtain the driver again from the 2012 server. All of our clients are running Windows 7 which means the Microsoft enhanced Point and Print compatibility driver is not installed in the OS natively.
I apparently need to figure out a way to get this installed on the host image so it trickles down to snapshots when recomposing the linked clone pool but I haven't been able to dig much information on doing this. Does anyone out there have any insight on how to accomplish this? If I recompose a pool now for a user who is using a new Point and Print driver, they get the following message that is resolved by removing the printer from their account and re-adding it:
"The 'Microsoft enhanced Point and Print compatibility driver' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"
I figured the easy solution would be to just install a printer using the Point and Print driver and then remove it...leaving the driver behind (unless it cleaned up after itself). The problem with this is in my testing, even after removing and re-adding a printer that set off installation of this Point and Print driver on the client, any other printer that was using it still required the remove/re-add process in order to work, else I got the same message. That tells me that the driver may be custom for each printer installed?
Color me a little confused. I do NOT like the way that Server 2012 handles printers. I've come across a few other issues as well (such as duplex capabilities not being remember on the print server for a printer) that I never had with the 2003 server.
Thanks!!

I was able to get it to work using your instructions off of here and your other thread
Thank you!
Chris
http://social.technet.microsoft.com/Forums/en-US/864553c2-c8ff-49d2-bd48-eb7b47381111/windows-2012-print-server-problem-with-xp-clients?prof=required

EXIT/ BADI/ Enhancement point for User Status change in Order

Hi all,
I am looking for an EXIT or a BADI or an enhancement point specifically for user status change in an order thru IW31/IW32.
I have the exit names for Order PBO, PAI, 'SAVE' event etc. so m not looking for generic answers.
I have to put some validations for the Order on USER STATUS CHANGE. Let me know if any of u have any pointers on that.
Thanks and Regards,
Sonal

Hi,
Use this Enhancement IWO10009 and call these function module to change the User Status
STATUS_TEXT_EDIT --> To Read the existing status.
STATUS_CHANGE_INTERN_VB --> to change the status.
Regards,
Satish

User Exit/BADI/Enhancement Point in VF01 before new document no assignment

Hi Expert,
I am looking for a user exit/BADI/Enhancement point which will trigger in VF01 before the new document no (Billing document no assign).
I need to cross check few things in Billing via VF01 at billing document save and give error message accordingly. The problem is if new number assign and there is error due to my code then when user save the document next he get a new no. its mean a no skip.
Example: The invoice no is 1000. User start creating a billing document with Vf01 and he get an error message due to my code at exit , at this point of time the next number assign to billing which is 1001 but document not save due to my error message. Now after applying correction user save data and billing document created with no 1002. So there is no skip.
I tried BADI BADI_SD_ACCOUNTING but this will trigger after no assignment. Can someone provide me a user exit/BADI/Enhancement point in VF01 which trigger before no range assignment and contain at least Billing header data to use in my code?
Regards
Swati
Edited by: Swati Namdev on Nov 16, 2010 9:55 PM

HI Brad and team,
BRED is right. I check few user exit normally all of us have that list or easily available on net.
BRED: my question is: I need to check the billing date VBRK-FKDAT of document should not be less than the sales order plan billing date VBAP-Oldate.
If this check fail then won't allow the user to create billing document. The problem is I used one user exit SDVFX001 already define previously that's work fine but issue is that user exit trigger after the billing no assignment. That's why when user get that error message he correct the document and create billing this time he get a new number which is skip of one no.
That why I need a User Exit/BADI/Enhancement Point which trigger at save but before document no assignment.
Please update more about your comment "Why not use a header level copy requirement routine to perform the checks and log the messages? This is the standard process." .
Suggest user exit USEREXIT_FILL_VBRK_VBRP trigger before save. I need at save the reason is VBRK-FKDAT this can be change.
Feel free to contact me back if you need more clarification.
Regards
Swati
Edited by: Swati Namdev on Nov 17, 2010 6:22 PM
Edited by: Swati Namdev on Nov 17, 2010 6:25 PM
Edited by: Swati Namdev on Nov 17, 2010 6:32 PM
Edited by: Swati Namdev on Nov 17, 2010 6:47 PM

Disable Item Category Field in Va01using Enhancement Point

Dear Experts,
I have a requirement to disable the "Item Category" column in VA01 transaction for certain order types.
I have tried using MV45AFZZ(USEREXIT_FIELD_MODIFICATION), but it does not help me much as it works only if a material is entered in the table.
I want the field to be disabled even if no material is entered in the item level table, i.e. during the load of the Overview screen.
I know we can do this using Implicit Enhancement Points, but i am not able to get the exact include to implement my code.
Can anyone please help me in finding the exact location to write my code, so that the "Item Category" column will always be disabled for that order type.
Thanks,
Praveen

Go to the screen where you want to disable the column by using system--> status-(click on screen no).
Identify the perform statement in PBO before the table control loop.there try implicit enhancement.
It will definitely work.
Thank You <Reward request removed by moderator>
Edited by: Vinod Kumar on Sep 30, 2011 3:01 PM

Enhancement Point in ABAP code

Hi ,
I am working on an upgrade from 4.6 to ECC ,so have a have a standard FM with an enhancement point , how do i know if there is an implementaion for that or not and can i debugg the code in the enhancement point .
When i click on the enhancement spot it goes to a class and i can see the code in that methods but cant set a breakpoint in it , kindly suggest what should i do.
Regards
Arun

Hi
double click on the enhancement point. it will take you to the enhancement spot into which it is defined.
click on the tab "enhancement implementation". it will show you all the existing implementation. I you find nothing than this point is not implemented yet.
if it is taking you to a class then it is a BADi implemented via new enhancement framework. to find it is implemented or not, repeat the above steps. to debug it:
in the left section, expand entries under heading BADi definitions.
double click on "implementations". you will get the existing entries on right side. double click on this entry. on the left side under heading "BADI definitions" you will get the implementing class.
double click on it to get the class name.
go into the class and see the method implemented. u try to hard code the break point into the method,
activate it and then try to debug it.
Thanks
Vishal Kapoor

How to avoid displaying date,time using Enhancement point.

Hi friends,
i have to work on the standard report.
stadard report displays date,time ,reportname on the top of the page. my requirement is not to display date ,time,reportname.
they have used the following code,
WRITE text-001 TO m_line+d_offset(4). " Time
WRITE sy-timlo USING EDIT MASK '__:__:__' TO m_line+d_offset(08).
WRITE text-002 TO m_line+d_offset(05). " Date
WRITE sy-datlo DD/MM/YYYY TO m_line+d_offset(10).
BY using Enhancement point how to achieve my task.
kindly help me

Post Author: jsanzone
CA Forum: WebIntelligence Reporting
basham,
You didn't mention which type of DBMS you are using (i.e. Oracle, MS SQL, MySQL, etc), but in a nutshell using MS SQL here is the principle. Your time that is recorded in the records is dependent upon a setting in your RDBMS. For instance, the RDBMS can use the machine time (which would most likely be local time), or it can use the machine time with an offset (to accomodate GMT, for instance). GMT is factored differently based upon your time zone (and time of year, i.e. DST or EST, etc). I'm on the east coast so right now my offset is GMT - 5, so if my time right now is 1457, then GMT is 1957. To get SQL to compute an offset you must take the number of hours to offset and divide by 24 (24 hours in a day) and add that to the record in the database. For instance, to get GMT right now I would use:
select cast(getdate()5/24. as char(12))rtrim(convert(char(12),getdate()5/24.,8))' GMT'
Hope this helps. If you're on Oracle, then the mathematical principles remain the same, just the formatting will be different.

User Exit/BADI/Enhancement Point in VF01 after generating new billingdocno.

Hi Experts,
I am looking for a user exit/BADI/Enhancement point which will trigger in VF01 after generating the new document no (Billing document no assign). The Billing document no is generating in the FM RV_INVOICE_DOCUMENT_ADD ( NUMBER_GET_NEXT).
Now the Billing document no is generating like '0000152', i want to concatenate 'ECR' to the generated Billing document no and it should be updated like ECR0000152 in Billing tables (VBRK, VBRP).
Kindly let me know is there any EXIT/BADI to achieve this functionality.
Regards,
Venu

Hi Venu,,
    These are the enhancements and badis for vf01, please check which will be helpful to you,,
<exit farm removed by moderator>
<points begging removed by moderator>
       Warm Regards
        Zulfikhar Ali
Edited by: Thomas Zloch on Oct 1, 2011 3:57 PM

Creation of an enhancment Point

Similar Messages

Maybe you are looking for