Creation of Asset APC account

Hi
Please let me know how to create an Asset APC account with cost element category 90. Since its a balance sheet account, it does not allow me to create the cost element.
Please guide me how create the Asset APC account with cost element category 90
Thanks

Hi,
It must be created using KA01 followed by message "Account is balance sheet account: cost elemen category is defined" > Enter to continue as this is only information message.
Hope it helps.
Kind regards,
John Chin

Similar Messages

  • APC Posting to Assets Reconciliation Account

    Hi Experts,
    We are currently working with AS91 and AS94 legcay data Transfer. The acquisition is completed, we gave acquisition values in Dep Area 01 (Book Depreciation Area), Do we also need to reset the Assets reconciliation account and post the APC values to them? Or the 01 acquistion values will automatically post to Assets reconciliation accounts and how?
    What is to be done?
    Please guide.
    Best Regards
    VK

    Thanks Krishna,
    OASV does not provide the option of document and local curreny. We would like to force the values from Local currency to group currency disregarding the exchange rates.
    So after restetting the reconciliation account we will post using F-02.
    Any negative impact?
    Best Regards
    VK

  • Asset Creation with intermediary Asset Holding Account

    Hello Gurus,
    We are on ECC6.0 and SRM 7.0 , business requirement is to procure the asset from the P2P cycle and have an Asset Holding account as an intermediary account. And at Month End post the balance from the intermediary account to the main asset account after review.
    Business has clear requirement to have the all posting first going from the P2P cycle to a Asset Holding account( intermediary account) and at month end review the same  and than create the asset and than  transfer the posting from Asset holding account  to the Main asset Account.
    Can you please provide inputs how do we address the same.
    Thanks & Regards
    Rutvij

    Hi
    I understand about the AUC after checking various threads on SDN.
    But i am wondering is my requirement addressed
    'Business has clear requirement to have the all posting first going from the P2P cycle to a Asset Holding account( intermediary account) and at month end review the same and than create the asset and than transfer the posting from Asset holding account to the Main asset Account"
    So if we go with AUC , we need to create a asset number before the procurement process starts.
    At the completion of the AUC once the asset is settled, for the new asset  procurement business will have to create a new AUC asset number.
    Hope I am able to help you in understanding the requirement.
    Any inputs in this regard are helpful
    Thanks & Regards
    Rutvij

  • Creation of asset in PO

    Does anybody know if it is possible to add extra fields in the first screen of asset creation when this is opened from within the PO?
    More specific: when creating a Purchase Order and the account assignment is set as Asset (multiple account assignment), the user has the option of creating a new asset. In this field a pop-up screen will appear with limited values to fill.
    I would like to have the field "Capital investment order" on that same screen without having to push the "additional info" button which brings me tot the normal asset master data screen.
    Does someone know if this is possible?
    Thanks in advance.
    Hans

    Thanks for the answer.
    Any idea if it is possible to replace any of the values on the first screen by the investment order? For example the field location which isn't needed is my solution.
    Thx.
    Hans

  • Asset Reconciliation Account

    Hello Experts-
    I fell in a tricky situation at my work place. We have an asset reconciliation account which has a balance but, this balance does not correspond to any asset. When SAP Fixed assets was implemented here, they had a balance for this account and then have converted it into a reconciliation account. How do I create an asset which represents that balance as APC value? Or how would I transfer it from this reconciliation account to a clearing account so that I can create a real asset and transfer this APC to a real asset?
    Any thoughts on this issue would be really appreciated.
    Thanks in advance.
    RNarayan

    Hi,
    To post the balance values from the take over values from AS91 on the Asset Reconciliation Account
    You can use transaction:
    OASV
    ABFI (use transaction type 100 and don't fill in an asset number)
    The postings on these account are total postings by bussines area and there is no 1:1 relation with assets like with debtors and credititors. (when you run the depreciation it create total amounts

  • Revaluation J1AI - APC accounts not posted

    Hello SAP Guru,
    Good day!
    I tried to run J1AI to post revaluation. After running the tcode I saw the revaluation output is correct. However when I look at FI document in AW01n, do document was posted. Then I tried to run AFABN to depreciate the asset, then depreciation document for revaluation was posted, but APC accounts were still not posted.
    Do reavluation program only posts for depreciation and not APC? Please help.
    Thanks!
    Jhero

    Revaluation area was checked for REval APC and Reval Dep field.

  • Asset GL accounts not getting picked up in ABST2 run

    Hi,
    There are few asset GL accounts i.e APC and AccDep accounts which are not getting picked up in ABST2 run. What could be the reason? Please advise as to how can we ensure that we get a spool of all the GL accounts post ABST2 run.
    Thanks,
    DP

    Are the missing GL accounts set up as asset reconciliation accounts go to FS03, enter GL account number, and go to control data tab, field recon account for account type should be A for Assets.
    Thanks,
    Tammy

  • Vendor Reconciliation & Asset Reconciliation Account

    Dears
    I am a little confused regarding the reconciliation accounts.
    We are making for Asset Config settings for down payment posting.  I selected downpayment account for Asset Downpayment in AO90; but the system says the GL is not a reconciliation account.
    When I saw the GL account, it is created as a Vendor Reconciliation account.
    But in AO90 I think, we should give an Asset Reconciliation Account, right ?
    If that is the case, why we should have separate reconciliation account for Vendor and Asset in Downpayment posting for Assets ?
    When we post the Vendor Downpayment in F-48 using Spl. GL indicator 'A' , we are assigning the PO number also where asset is linked.
    Spl-GL 'A' is linked to a reconciliation account for vendor.
    Asset downpayment is also linked to a reconciliation account for asset.
    If that is the case, which downpayment account, the advance amount for asset is posted ?

    Hi Niki
    I personally dont like updating the Down Payments for assets in Asset Accounting.. It is inviting troubles w/o much of value-add.. If you post DP to asset, then Invoice and you dont clear the DP, the depreciation is calculated on Invoice amount + DP Amount
    Ofcourse, it gets adjusted in future depreciation runs once you clear DP. But if you clear in subsequent FY, then thats a problem
    In order to avoid updating DP in AA, follow the below steps
    1. Create a new FSG as a copy of G067 in which you will suppress the Asset Number
    2. Assign this FSG in Vendor recon accounts
    3. Do F-47 and enter the PO Number..
    4. System will give an error msg F5 378..
    5. Suppress it in OBA5, and you are done..
    I remember this till date because this was one of my initial findings / learnings in my SAP Career ;-)
    Best Regards
    Ajay M

  • Query relating to the creation of Managed Service Accounts

    Hi Folks
    I am studying for my 70-411 exam and have a query relating to the creation of Managed Service Accounts.
    I have successfully created an MSA account named 'MSATest' on a DC  using:
     new-adserviceaccount -name msatest –dnshostname home-dc-01 -passthru
    and
     add-AdcomputerServiceAccount -identity home-ap-01 -serviceaccount msatest -passthru
    However the guide that I am using now says that I now need to run:  Install-ADServiceAccount on the host computer in the domain to install the MSA in order to make available it available for use by services.
    So on my member server (home-ap-01) I have installed the Active Directory Module for powershell and ran:
    PS C:\Users\administrator.PCECORP> Install-ADServiceAccount -Identity msatest
    Install-ADServiceAccount : Cannot install service account. Error Message: 'An
    unspecified error has occurred'.
    At line:1 char:1
    + Install-ADServiceAccount -Identity msatest
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : WriteError: (msatest:String) [Install-ADServiceA
       ccount], ADException
        + FullyQualifiedErrorId : InstallADServiceAccount:PerformOperation:Install
       ServiceAcccountFailure,Microsoft.ActiveDirectory.Management.Commands.Insta
      llADServiceAccount
    PS C:\Users\administrator.PCECORP>
    However this errors, Have I misunderstood the purpose of the Install-ADServiceAccount ?  or am I doing something wrong?
    Thanks in advance for you help.

    Try using  -RestrictToSingleComputer parameter when creating service account with New-ADServiceAccount.
    Gleb.
    Hi Gleb
    Thank you for your help, it is appreciated.  That did the trick.
    All the best.

  • Restrict creation new e-mail accounts on Ipad2 4.3 does not work..

    Hello everybody
    For business use i have to secure the Ipad2. I am using the Iphone configuration utility 3.3 to block some features.
    It´s not possible to block the creation of E-mail accounts with this utility. I found out it is possible to restrict on the Ipad itselve using the restrictions option >General>Restrictions...So i have activated this option.
    However clicking the envelop on the homescreen it´s still possible to bypass and to add an e-mail account for example gmail on the Ipad ?? I was rather suprised this was still working but perhaps i am doing something wrong.
    Do you have any idea what is causing this issue or is it maybe a bug?
    Thanks for your feedback.
    Br. Dirk
    Leiden, The Netherlands

    Hi. Does anyone know the answer to this? I found this out as well, though my hardening requires me to actually seal off email usage.

  • Creation of Assets.

    Hello!
    Explain how to create an asset in Account from product in Opportunity after conclusion of transaction. Are there automatics web-services for do this?

    Hi,
    Post your question in the Financials forum for a better/faster response.
    Financials
    Financials
    Thanks,
    Hussein

  • Creation of assets from PS

    Hi i have two question regarding creation of assets from PS
    1) Can the AUC be assigned to an network order or activity instead of WBSE
    1) Can multiple asset be created from a single AUD.
    Regards
    Suhail

    hi sarang,
    I am try to create asset using wbs element, but i am not finding menu path as given by you;
    edit>WBS element>investment program>create fixed asset,
    as of now we are creating assets thru as01 and creating distribution rule in project for wbs element and actual settlment document thru cj88.
    after reading your solution creating assets using wbs element, pl revert how this is possible for us,
    pl help
    regards
    srihari

  • After the iOS 8.0 update, our iPads with profile to restrict the modification of account settings, allows the creation of new email accounts!

    We have hundreds of iPads 4 rollout to external sales forces. We used Apple Configurator to supervised them and on the top we deployed thru a MDM system the restriction profile to Disallow modifying account settings.
    After updating some iPads to iOS 8.0 we found out that the restriction "Disallow/Allow modifying account setting" works different compared to iOS 7. Now in iOS 8 it is posible to create new email accounts.
    Behavior in iOS7 (with supervised mode) :
    - This restrictions profile disabled the possibility to add, modify or delete email accounts from the Setting menu.
    - The EMAIL app is blocked popping up a warning message that a creation of an email account is restricted.
    Behavior in iOS8.0 (with supervised mode) :
    - This restrictions profile disabled the possibility to add, modify or delete email accounts from the Setting menu.
    - Using the EMAIL app shows the standard options to create a email account: iCloud, Exchange, Google, etc. and let the user store the account.
    - In Settings the new Email account ist available, but without the permissions to modify or delete them
    Does somebody experienced the same issue? Did you find a workaround?
    Do anybody knows, if their is a fix on this issue in iOS 8.0.1?

    Today we updated to the device to iOS 8.0.2, but we have see the same behavior: EMAIL app is not protected to create new email accounts.

  • Creation of Asset with Sub-number

    Hi Gurus,
    Would like to ask for your expert advice regarding the creation of Asset using Sub-numbers. 
    We have seversal assets where expenses and depreciation will be divided into different cost centers. We are planning to use asset subnumber for easier monitoring of related assets but we are a little bit undecided because we do not know if there are any disadvantages of using asset sub numbers.
    Is it advisable to use asset sub-number? What are the things that we need to consider if in case we will use asset subnumber in creating our assets.
    Thanks in advance for your help.
    Ellicec

    Hi Madhu,
    I tried to create an asset in AS01 and afterwards create subnumbers ( Subnumbers 1-3 ) for that asset in AS11. But it seems that I cannot edit the field of the assets with subnumbers. It copies the same data as that of the one created in AS01  ( subnumber 0 ).
    I also tried to run depreciation in AFAB but only the main asset was depreciated. The sub assets were not depreciated.
    Kindly advise the steps to correctly execute this.
    Thanks,
    Ellicec

  • WBS Element Populated on Asset GL Account Line Ledger 90

    Hello All,
    For preliminay settlement of a WBS element to an AuC asset, how do you get the WBS element to populate on the account line for the asset gl account in ledger 90?
    Currently, I'm working in R/3 4.7 and the WBS populates on both sides of the accounting document (on the asset line as well as the settlement line). We are upgrading to ECC6 and this does not work the same. The WBS element is blank on the asset line. I cannot remember how the R/3 4.7 system was configured in order for the asset line to mirror the WBS element on the settlement line. If I can understand how it works in R/3, then maybe I can get it to function the same in the upgrade.
    Any assistance would be greatly appreciated.
    Thanks.

    Hi
    When the WBS element is settled to the Asset, ideally the balance in the WBS element would have become Zero. Then there is no question of calculation of Interest on WBS element. You can change the status of the WBS element to TECO or CLSD if you dont want to use the same WBS element further.
    Regards,
    Lakshmanan Krishnan

Maybe you are looking for