Creation of Asset Master

Dear All
A very good morning.
My problem is that when I create the asset master through AS0, in the Depreciation Area tab all the fields viz.Book depreciation, dummy 1 etc appear in white ie they are changeable by the user.
I want to select a sreen layout in which these fields turn grey & cannot be changed by the user.
Can you please help me on this.
Thanks
Saurabh Bagri

Hi Pushkaraj,
Thnx for ur reply.
In the screen layout, the depreciation key is specified to be a madantory one with no check box for display.What should be done in such a case.
More so when i try to come out of this screen the system gives a message "Specify maintanence level" & dosnt allows me to quit. Can you explain this to me .
Regards,
Saurabh Bagri

Similar Messages

  • Creation of Asset Master in Goods Receipt

    Dear All,
    Is there any possiblities to create Asset Master during Goods Receipt Process.  The Scenarios is the user did not want to create Asset Code during or before creation of Purchaes Order and we need the system to create the Asset with Sub number in Goods Receipt.
    Please help.
    Regards,
    Suresh

    Hi
    I dont think there is a possibility, you need to give true account assignment in creation of PO.
    Thanks

  • Problem with the creation of asset master record

    Hi Gurus,
    i am having problem in creation of a new asset master with the use of existing man asset number and different asset sub number. I am trying to create the asset in the same company code but different depriciation area, but the system is not allowing me to do that. Is there a setting in the SPRO by which I can allow the use of creation of the asset number by using the already existing asset number with the new asset sub number. This is actually happening in the system for one type of equipments but not for other.
    Can any one tell me what settings are to be made to allow this for all containers.
    Thanks in advance
    Anoop Sharma

    Hi,
    A sub asset master can be created with AS11 only.
    You cannot create a asset sub number under a main asset number, in the case, where different set of dep areas needs to be maintained.
    When you create a sub asset, all the dep areas will be copied to sub asset's master from main asset master. Since this set of dep areas cannot be different from main asset to sub asset.
    Hopw you understood this.
    Thanks,
    Srinu.

  • Creation of asset master data

    hi sap gurus,
    i have a problem regarding saving of asset master data.
    while creating asset master data,-in time dependent tab the cost center it is comming correctly.but when i am saving it is giving ,the following error:
    you cannot save the asset(correct depreciation error)
    Diagnosis: you have choosen the function save.the system found an
    internal problem when calculating depreciation for a check document.
    sys responce:The asset cannot be created
    procedure:1 check the error from depreciation calculation by
    performing the function "Test doc.'again.
    2 if you cannot correct the error ,contact your sys specialist.you
    must then cancel your current processing.
    please help me regarding the problem......

    hi
    check your depreciation area settings for the asset class

  • Date error during creation of asset master using bapi

    Hi All,
    Am creating asset master using BAPI_FIXEDASSET_OVRTAKE_CREATE ,,
    but am getting date problem while passing value  '21022005'  ( or any date )  in the format  'ddmmyyyy' 
    the error says 'the capitalization date is invalid' ....
    the capitalization date is under  the structure BAPI1022_FEGLG002 of the above mentioned bapi....
    even i have tried using '21.02.2005' its still not working as the capitalization date is 8 char...
    kindly help me out with the possibilities
    thanks
    john

    Hi John,
    Some of the structures you have to fill for the IDOC belongs to a  referencing ...X structure. For example structure BAPI1022_FEGLG002 and BAPI1022_FEGLG002X.                                                                               
    When you fill the capitalization dat (BAPI1022_FEGLG002-CAP_DATE = '19981231') it's necessary to fill the corresponding field (BAPI1022_FEGLG002X-CAP_DATE = 'X') to  specify that the content of the field should be transferred to the fixed asset. Otherwise it'll be not transferred and you'll get an error message instead.                                                 
    Regards Bernhard

  • Automatic creation of asset maste

    I want to know how to configure this:
    when I created a project ,an asset master would be automatically created.
    best regards

    IM- PS ingetration is based on Investment profile. When Release status is set on Investment profile carrying WBS based on setting system will create AUC. Reqeust you to search in forum / Read SAP Help on IM ; you will get relevant information.
    With Regards
    Nitin P.

  • Creation of Assets master Data

    Dear All,
    Now we need to upload master data for Asset materials, which we are treating as UNBW Mat type (Non valuated materials). If we want to sell it after 1 Year & then what is the procedure ?  In UNBW mat type there is no sales views maintained.
    pls exp me
    regds,
    Channa

    hi,
    Do try to create the new material type with your specified view, you may also copy the exisisting the mataerial types, so that the you can get few of the default settings automatically and for few you can make changes...
    Regards
    Priyanka.P

  • Asset master creation (run time error)

    Dear all
    I am facing problem with  asset accounting at that time creation of asset master getting to  run time error message
    Error message: GETWA_NOT_ASSIGNED
    Fields symbol not yet been assigned(segment 32770)
    Thanks & Regards
    suresh
    Edited by: prasad y on Jul 5, 2011 3:23 PM

    Dear:
                  Please check notes, they have to be implemented in the system
                   992846
                   988238
                   Regards

  • Cost center and plant in asset master creation compulsory entry config

    where we configure that cost center and plant entry is complusory while creation of asset master.
    is it   asset accounting
                   master data
                           Define screen layout for asset master
                                     Define Screen Layout for Asset Master Data
    as in our system in config    cost center and plant is optional        but while creation of asset master it becomes compulsory field

    Hi,
    Yes, it's defined in the layouts for assets master data.
    Regards,
    Eli

  • Error occurs during Asset Master Record Creation.

    Hello SAP Gurus,
    The error occurs during asset master record creation.
    Our fiscal year variant is Z6 (July to June). The asset was acquired in June 15 (previous fiscal year) but was only set up on July 30 (this fiscal year) . When we put the depreciation start date as 15 June the error appeared. While saving the Asset master we are getting below error.
    We tried the same with Post Capitalization of Asset (ABNAN) there also we are getting same error.
    ERROR: - as below
    u2003
    SYST: *You cannot determine the period for rule 02 to 05.08.08 ( todayu2019s date )*
    *Message no. AA613*
    *Diagnosis*The system could not determine a depreciation period on 05.08.08 for period control 02 of the period control method of phase N1 of depreciation key INTERN-00001-0000.
    Procedure
    Maintain the assignment of the periods for the period control entered.
    Proceed
    If the period control you entered is a standard period control, you can assign the periods automatically.Proceed
    Please find enclosed attachment for clear description of the error.
    Please share your experiences regarding this subject.
    Thanking you in anticipation.
    Regards,
    Suresh.
    09986375966

    Hi,
    have you generated the period controls properly? If not, the error is raised correctly by the system.
    To generate period controls go to:
    IMG Asset Accounting -> Depreciation -> Valuation Methods -> Period Control -> Generate Period Controls    / or you can use OA84
    Regards,
    Markus

  • Asset master creation?

    Dear Sap Gurus,
    Can any one xplain asset master creation & asset procurement. I did exceise of seraching this post in sdn before posting here?
    please advise on this more clearly if you!!!!.
    Regards
    TG

    Go through SDN document about [Capital Procurement in SAP|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/808c60ca-013b-2c10-34a2-94d1eb442e6f],it will solve your query.

  • Post Capitalization in asset master creation

    Hi
    sapers
    what is use of the post capuitalization field in asset master creation if any one know pls explain with exampls
    Thanks in Advanse
    Ram

    Hi:
         Acquisition date is the date at which asset was acquired and capitalization date is the date at which asset is given value i-e cost is posted to asset. For post capitalization button in AS01 please refer to the link given
    Post Capitalisation
    Regards

  • Making Useful life field optional in Asset master creation(AS01)

    Hi all,
    I want to make 'Useful life' field in 'Depreciation area' tab as optional in AS01 (Asset master).
    1. I made the screen layout changes using AO21 and made Useful life optional
    2. I assigned the above screen layout in OAYZ
    Despite doing this, during asset master creation, the field still shows as 'Required' and not as 'optional'.
    Am I missing anything else?  Kindly provide some pointers.
    Thanks,
    Sridevi

    Hi Sridevi
    Please check your depreciation key. If your depreciation is based on useful life, the key is required regardless the field status.
    Thanks
    Sanjeev

  • Error in Asset Master Creation

    In Asset Master Creation an error occured that is
    CUSTOMIZING INCONSISTENCY MISSING/INCORRECT IN TABLE NO T093B
    Waiting for u r early reply
    venky
    Edited by: venky venky on Jul 11, 2008 2:53 PM

    I suppose you need to check your configuration of Low Value Assets for each
    depreciation area.
    But before that, please tell me which class of Assets you are using ......Is
    it the *LVA Class 5000 ( individual management )* or* 5001 ( collective
    management)*. Either way, you need to assign a maximum value / maximum value
    over quantity, as the case may be. Unless and until you furnish a value cap,
    the asset class does not permit you to create asset master records.
    Please look into your IMG under the path:
    *IMG -> Financial Accounting -> Asset Accounting -> Valuation ->Amount
    Specifications(Company Code / Depreciation Area) ->
    Specify Maximum Amount for LVA + Asset Classes*
    You would see two activities listed.
    Under *Activity 1*, you need to select and assign value check (*represented
    by number 1*) if you are using *LVA Class 5000* ; alternatively, you need
    to select and assign Check Maximum Amount with Quantity (*represented by
    number 2*) if you are using *LVA class 5001*.
    You need to do this for each depreciation area you wish to apply this value
    cap to and save (using the floppy icon and look out for the confirmatory
    message at the bottom left of your screen).
    Under *Activity 2,* You need to furnish a value cap ( a ceiling in monetary
    units, currency-specifically) for each depreciation area ( a column for
    document value and another for Purchase order value ( possibly to
    accommodate any tax, as applicable). Please make sure that you do it for
    your company code and for each depreciation area wherein you want to control
    using a value cap.
    Save and look for the confirmatory message at the bottom left of the screen.
    Regards,
    Bharti

  • Error in Asset Master record creation

    I have created one asset class 1001 for land and 3001 for Vehicles by myself (i.e. without reference)
    I have filled all account determination, screenlayout, etc.
    When i create asset master record for LAND, i enter asset class 1001 (for land) & it accepts.
    But when i create asset master record for Vehicle, i enter asset class 3001 (for vehicle). But it throws error.
    Error shown is:
    Chart of depreciation IN00 that was determined is not entered for asset class 3001.
    _How to rectify the problem ?_
    Help with Tcode or menu path.
    Further to rectify,
    I am trying to Specify Chart-of-Dep.-Dependent Screen Layout/Acct Assignment (Tcode: ANK1)
    But error shown is:
    Chart-of-depreciation-dependent assignment to asset class not possible
    (Message no. AC012)

    I am trying to Specify Chart-of-Dep.-Dependent Screen Layout/Acct Assignment (Tcode: ANK1)
    But error shown is:
    Chart-of-depreciation-dependent assignment to asset class not possible
    (Message no. AC012)
    Solution given is:
    In order to be able to assign chart-of-depreciation-dependent data to asset class 1001, the following conditions have to be met. You have to have already
    1. Defined at least two active charts of depreciation
    2. Assigned asset class 1001 to more than one chart of depreciation
    However, at the moment this asset class is only assigned to chart of depreciation 1.
    I m unable to understand the solution
    Edited by: Deepak Agrawal on Mar 19, 2009 8:06 PM

Maybe you are looking for