Creation of bc sets?

dear all,
i wud like to know how to create bc sets (business configuration sets) of Project System in sand box client, can any one help me out in this regard.
is this bc sets can be copied into ides?
is there any way of doing copying of existing config settings to ides, pl tell me
thanx in advance
regards
srihari
PS: I don't know this query belongs which forum? hence i am putting in this forum.

Hi,
pls refer this link.....
http://help.sap.com/saphelp_46c/helpdata/en/d2/a22237406d183fe10000009b38f889/frameset.htm
http://sapabaplive.blogspot.com/2007/12/create-bc-set-from-transport-request.html
Activate Business Configuration Sets
http://help.sap.com/saphelp_46c/helpdata/en/d2/a22237406d183fe10000009b38f889/frameset.htm
If it is useful reward points.
Regards,
Gowri Sankar

Similar Messages

Creation of BC set for ECATT

Hello,
I have created a ECATT for master data uploading. This created a request number. Now when I am trying to create a BC set using tcode SCPR3 and attaching the above created request it is giving me the following error:-
Message Number: S_CUS_IMG_ACTIVITY230
Diagnosis
Logical object ECAT is a lockable (TADIR-mandatory) object.
System Response
Lockable objects cannot be included in BC sets because, during the activation process, an entry would have to be written in the catalog of repository objects (table TADIR). However, this is not possible with BC sets.
Procedure
The object cannot be used in BC sets.
Kindly guide me as to how do i resolve this error and attach my Ecatt request in the BC set.
Narendra
Creation of BC set for ECATT

Hi,
Check if this process helps u.
Procedure
Aassign existing preconfiguration, transactions or rReports
1.      Go to the structure element to which you want to assign preconfiguration, in the project structure.
2.      Choose BC Set, CATT, eCATT Test Configuration, Transaction, Program or Add-On Transport Request, in the Type column.
3.      If it is not a process step, enter a component from the possible entries help in the Component field.
4.      Make an entry in the Object column, or choose from the possible entries help for the Object field.
5.      Save your entries.
Assign IMG objects
1.      Go to the structure element in the reference structure to which you want to assign an IMG object.
2.      Choose IMG Object in the Type field.
3.      If it is not a process step, enter a component from the possible entries help in the Component field.
4.      Call the possible entries help for the Object field. You go to the Implementation Guide (IMG) of the selected component system.
5.      Choose one or more IMG object nodes and choose Select.
6.      Choose Copy Selected Nodes.
You have now assigned an IMG object to a structure element.The system goes back to the Configuration tab and fills in the Object and Description columns.
Create and assign preconfiguration
1.      Go to the structure element to which you want to assign preconfiguration, in the project structure.
2.      Choose a Type.
3.      To create a new BC Set, CATT or eCATT test configuration from the Configuration tab, enter a name in the Object field and choose Create.
4.      You go to one of the following transactions, depending on the object type:
     BC Set: BC Set Maintenance
     eCATT Test Configuration: Test Configuration (eCATT tool)
     CATT: Change test case.
5.      Enter the data required to create a new BC Set, eCATT test configuration or CATT.
regards
Gokul

Just in time creation of Result Set

I have this problem which is bugging me a lot. Actually I want to display some data on the browser by fetching it from the database. Now this result set could be quite big. So i would like to display on multiple pages like if there are 100 rows then 25 rows per page, so in total 4 pages. One way to do this load all data in memory and then display it moving your cursor down, but in this technique u have to keep large amount of data in memory. I want to fetch these rows as required like first time top 25 rows, next time next 25 rows and so on. I am stuck.. Please help me!!

//you could use a Select bean:
private com.ibm.ivj.db.uibeans.Select getSelectSQL() {
     if (ivjSelectSQL == null) {
          try {
               ivjSelectSQL = new com.ibm.ivj.db.uibeans.Select();
               ivjSelectSQL.setReadOnly(true);
               ivjSelectSQL.setQuery(new com.ibm.ivj.db.uibeans.Query               ivjSelectSQL.setQuery(new com.ibm.ivj.db.uibeans.Query(getMyCon(), sqlGeneral()));
          } catch (java.lang.Throwable ivjExc) {
               handleException(ivjExc);
     return ivjSelectSQL;
          ivjScrollPaneTableGen.setModel(getSelectSQL());
          ivjScrollPaneTableGen.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
ivjScrollPaneTableGen.setAutoCreateColumnsFromModel(true);
          getSelectSQL().execute();
// after this your table will contain automatically all the rows.
how the NextPage should work I haven't done yet, but I saw there is a setViewport(JViewport) function in JScrollPane class which seems to do the thing that you want.

Creation of a Marketing Profile Set based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset thru the WebUI Segment Builder

Objective: Creation of a Marketing Profile Set based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset thru the WebUI Segment Builder.
Problems: Standard CRM_MKTTG_BP_BIRTHDATE Infoset DOES NEVER RETURN ANY RESULTS on the segmentation builder of the WebUI client (no matter the filter you specify).
Other cases: However if we create a new Data source with data "Extraction from Query" (transaction RS02) based on this standard CRM_MKTTG_BP_BIRTHDATE Infoset and we test the functionality using transaction RSA3, IT DOES RETURN RESULTS (using the same filters as in the segmentation builder)! Of course the segmentation builder works with other attribute lists.
NEW: IF WE DON’T ESPECIFY ANY SEGMENTATION BASE IN THE PROFILE GROUP, IT DOES RETURN RESULTS!!! (GO TO THE END OF THE DOCUMENT FOR DETAILS)
Steps followed:
Review Standard Infoset CRM_MKTTG_BP_BIRTHDATE (Transaction SQ02).Review Data Reading Program code: do we have to change the standard code? We have only remove the "BREAK-POINT" statement.
Creation of a Data source based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset (Transaction CRMD_MKTDS).
Creation of an Attribute List based on that standard Data source and selection the Birth date as a filter in the Attribute list (Transaction CRMD_MKTDS).
On the segment builder of the WebUI set any filter (Example: “TODAY”).
Steps in detail:
Review Standard Infoset CRM_MKTTG_BP_BIRTHDATE
SQ02.
(Image deleted)
Review Data Reading Program code (Code attached)
(Image deleted)
Creation of a Data source based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset
Data source: Transaction: SPRO – Customer Relationship Management - Marketing – Segmentation - Maintain Data Sources and Attribute Lists: CRMD_MKTDS
Create Data Source
(Image deleted)
Infoset: CRM_MKTTG_BP_BIRTHDATE.
Business Partner Field: CRMT_MKTTG_IS_BIRTHDATE-PARTNER_GUID
(Image deleted)
Result:
(Image deleted)
Attribute List
Creation of the Attribute List
(Image deleted)
Assign Data Source:
(Image deleted)
Selection of the Birth date as a filter in the Attribute list:
(Image deleted)
Result:
(Image deleted)
Segment builder of the WebUI:
Access to WebUI with marketing role.
Create Segment:
Creation of Profile Set
Graphical modeler
Create Filter: We have already tried many different filters (we already seen notes referring to this matter).
Example1: “today”
Count target group. Here I would like to stand out that once you click on the “Count” option, immediately it shows 0 results. In other words, it doesn’t process any information. With other attribute lists it takes some time to process, no matter the filter or the attribute list you use. However if we create a new Data source with data "Extraction from Query" (transaction RS02) based on this standard CRM_MKTTG_BP_BIRTHDATE Infoset and we test the functionality using transaction RSA3, IT DOES RETURN RESULTS (with “today” filter and other)! So it seems that the problem has to do with the segment builder, not the Infoset.
Result: it never return any results no matter the filter you specify.
Other cases:
Creation of a new Data source with data "Extraction from Query" where you enter the name of your new query
Creation of a Data source based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset
Standard Infoset CRM_MKTTG_BP_BIRTHDATE:
We fill the form and select “Extraction from Query”:
Press SAVE and define which fields will be available for selection and which of them will be visible.
RSA3: Extractor checker in order to test the Data source:
We specify the Data source:
IT DOES RETURN RESULTS:
ALV Grid:
NEW: It seems that it has to do with the Segmentation Basis selected in the creation of a Profile Set, because if we do not select any, it does return results. But we need to create this Profile Set based on a particular Segmentation Basis called BS Usuarios Registrados.
Segment builder – Profile Set of the WebUISegmentation Basis: we leave it in blanc.
Graphical modeler
Create Filter: We have already tried many different filters (we already seen notes referring to this matter).
Example1: “today”
Count target group.
Result: IT DOES RETURN RESULTS!!! àConclusion: the problem is the Segmentation Basis
Define Segmentation Basis:
Transaction: SPRO – Customer Relationship Management - Marketing – Segmentation – Classic Segmentation - Define Segmentation Basis.BS Usuarios Registrados:
Define Reports for Creating Segmentation Bases
Transaction: SPRO – Customer Relationship Management - Marketing – Segmentation – Classic Segmentation - Define Reports for Creating Segmentation BasesZMK_UTL_MGR_SITES_UREG
Define Usage for Segments:
Transacción: SPRO – Customer Relationship Management - Marketing – Segmentation – General Settings - Define Usage for Segments.ZBS_UR à02 Segmentatión Basis
Attribute List:Category:
There is no Category 02 Segmentatión Basis!!! Why?? Why is not posible to select Category 02 Segmentation Basis in the creation of the Attribute List???
Usage ID
NEW: It seems that it has to do with the Segmentation Basis selected in the creation of a Profile Set, because if we do not select any, it does return results. But we need to create this Profile Set based on a particular Segmentation Basis called BS Usuarios Registrados. Why is not posible to select Category 02 Segmentation Basis in the creation of the Attribute List???

It seems that the standard Infoset doesn’t work by itself with Segmentation Basis. Two SAP notes have been applied and a new Field Group has been added to the Infoset (in order to distint the Segmentation Base).
CRMT_MKTTG_IS_BIRTHDATE-MGRGUID
1966298: MGR_GUID is not populated correctly to infoset read program
2007687:Segmentation InfoSet queries saved with incorrect Master Group
For that reason we had to create a new Infoset based on the standard CRMT_MKTTG_IS_BIRTHDATE, but adding this new Field MGRGUID to the Group Fields.
Issue solved

Creation of production campaign and deletion of orders from campaign

Hi APO Gurus,
This is regarding campaign creation for a set or group of orders.
I have a group of orders in a z table, I want to create a campaign in PP/DS by using Heuristic : /sapapo/heur_pcm_create.
Can I do this without going to DS board, Simply by calling the above given function module in a z program?
Similarly , in another table if I have a set of orders , which are already part of a campaign.
Can I remove those orders from the Campaign by using heuristic : /SAPAPO/HEUR-PCM_Dissolve , without going to DS Board.
Waiting for your valuable suggestions.
Regards,
Ravi

Resolved .

Creation of Campaign Id and assign Target Group to it.

Hi all,
I am facing a problem in creating a Campaign Id. This is the first time i am working on CRM Marketing Campaign, and i dont know the process of creating a Campaign id for a Target Group created for BP's. Please do help me in providing me any program or link where i can find the sample programs for creation of campaign id, Campaign Element, Profile Set, Target Group, Assigning BP's to Target Group.. I am presently using the below mentioned function modules/BAPI's for creation of Profile Set, Target Group etc.,
For Profile Set Creation:                                         BAPI_PROFILESET_CREATE
For Target Group Creation:                                    BAPI_TARGETGROUP_CREATE
For Assigning Target Group to Campaign:             MKTPL_TGGR_ASSIGN_CREATE
for Campaign Element:                                            MKT_ELEMENT_CREATE
Please provide me complete program to explain the above.
Thanks in Advance,
Nagesh Thanneeru.

hi,
Target group is a group of BP, like a BP list. It's a kind of master data which can be used in business transaction.
And profile set is a base of target group, just like Product Hierachy and Product category. Each target group should belong to a profile set. So create the profile set, before you create target group.
Campaign is a kind of Marketing element of CRM Marketing. In campaign, it need the BP or BP group or Target Group as its campaign objectives. Just like Customer of Sales Order, Vendor of Purchase order.
Campaign can be assigned several target groups or BP or BP groups in it.
So if you want to create campaign and assign target group to it, the steps is:
1. create a profile set by BAPI_PROFILESET_CREATE
2. create target group by BAPI_TARGETGROUP_CREATE, in this calling, you will use the profile set created before.
3. create campaign by MKT_ELEMENT_CREATE
4. assign the target group to your campaign, by MKTPL_TGGR_ASSIGN_CREATEl, the target group comes from step 2, the campaign comes from step 3

Creation of a product description field of length 250 car. used for search?

Hi all,
we need to create a specific description field for products with a length of 250 (the standard description is too short at 40 car, =>table COMM_SHTXT) . That field should also be added to the search criteria.
What would be the best solution for this creation , given that the field must exist also in ECC SD from where the product is replicated to CRM :
-creation of a Z-append to the product table in ECC (table MARA?) and a corresponding include in the product table in CRM (COMM_PRODUCT) ?
-creation of an attribute in ECC (or Z-append) and creation of a "set attribute" in CRM (i.e transaction COMM_ATTRSET), but there are warning in CRM when you create an attribute of length > 132.
-using the standard Texts (no limitation of lenght) attached to products : is a search possible on these texts?or too complicated/poor performance ?
Regarding the display in CRM UI, is it possible to display all the 250 caracters if the field is a customized "set attribute" or a Z-append? It seems that it is not possible to display a string field on more than one line in the UI configuration, or even, on more than 8 columns in an assignment block?
thanks for your help
Ludovic

well, I have found at least how to replace the error message (length of max 75 car for PC UI) . Instead of trying to edit manually table T100C, there is an entry in customizing SPRO (cross appl/SAP Product/basic settings/Define Characteristics of System Messages
) which allows to customize standard messages , and so change from Error to Warning.

In sets (t-code GS01-04): How to change Field name

HI,
I have created sets for rule in validation by t-code GS01. Where I have given Tbale name BSEG and Field name KOSTL(Cost Center No). Now, I want to change field name SAKNR (GL NO) instead of cost center. When I am trying to change field name t-code GS02, there is field name is in display mode and no way to change it.
As I have lot of entries in each set, so that creation of new sets is very hard job again. Further when I trying to create new sets by reference it didnt change the table name and field name.
Please provide me a solution.
Khalid

Hi,
Hope it is not possible, logically total field is changing and the dependent entrie will not stay as it is. I don't think this is possible.
Eventhough the values are same but the fields are different.
VVR

Using Quota templates with Self Service Site Creation

I am having an issue with quota templates not getting assigned to site collections created with Self Service Site Creation.
I set up a quota template in 'Specify Quota Templates' and give it the name 'test'. I then go to self service site creation management and select the name 'test' from the 'Quota template to apply' dropdown. I then create a site using self service
site creation and when completed no template is applied to the new site collection. I am wondering if anybody has seen this or if not am I incorrect in what I am expecting, that is that all site created in that web application should have the quota template
applied that I selected in self-service site creation management
Steven Albrecht
University of Colorado Denver
Steven Albrecht

Hi Steven,
Please create a quota template named "Personal site" and apply in self service site creation page, then check again.
http://blogs.msdn.com/b/jimmiet/archive/2012/07/22/10332361.aspx
http://danmyhre.wordpress.com/2010/03/16/my-sites-do-not-have-a-quota-when-they-are-created/
Thanks
Daniel Yang
TechNet Community Support

IPhoto file creation date inconsistencies during drag and drop

I have noticed that if I drag and drop a photo from iPhoto to Finder, the file creation dates in Finder are inconsistent.
(This question is related to drag and drop only and not File->Export, which always uses the export date and timestamp for the file creation date and thus does not suit my needs).
TEST A -- If the EXIF DateTimeOriginated is 01/01/2013, and today's date is 03/03/2013, then:
In some cases when I drag a file to Finder, the EXIF date is used as the file modification/creation date in Finder
In some cases, today's date is used as the file modification/creation date in Finder
In some cases, a date in between the EXIF date and today's date is used
It appears that for case A1, these are files that do not have a modified copy. That is, if you select the photo in iPhoto and then click "File" -> "Reveal In Finder", the "Modified File" choice will be greyed out.
For cases A2 & A3, iPhoto has inexplicably decided to create modified versions of these files either today or sometime in the past.
TEST B -- I have read that unexplained modifications are tied to the auto-rotate function in cameras, and it does seem to be the case when I performed the test below:
Select a large group of landscape format photos (these would not have been auto-rotated), then drag and drop to Finder. The file creation dates are set to the EXIF date
Add some portrait photos to the group in (1). Now the file creation date of ALL photos including the non auto-rotated photos are set to the current date
The behaviour in B2 is clearly wrong, since the landscape photos should be the same as in B1. This is bug #1.
Furthermore, iPhoto appears to be inconsistent with when these modifications are made. For example, I dragged & dropped an auto-rotated photo on 02/02/2013, then dragged & dropped it again today, then the file creation date in Finder (and also the date of the modified file in iPhoto, as shown in iPhoto File->Reveal In Finder->Modified File) can either the EXIF date (01/01/2013), the late of the last drag & drop (02/02/2013), or today's date (03/03/2013); there does not appear to be any rhyme or reason to this. This is bug #2.
In any case, saying "you should never use drag & drop in iPhoto" (as I have read in some other forum posts) isn't a solution, because Apple should either (a) support this function correctly or (b) remove it altogether. Furthermore, I regularly burn photos to disk for others so having the file date and timestamps correctly set to the EXIF date helps keeping the photos sorted in the directory listings for multiple OS, so File->Export isn't a solution.

File data is file data. Exif is photo data. A file is not a photo. It's a container for a photo.
When you export you're not exporting a file. You're exporting a Photo. The medium of export is a new file. That file is created at the time of export, so that's its creation date. The Photo within that file is dated by the Exif.
There are apps that will modify the file date to match the Exif.
The variation you're seeing is likely due to the changes in how the iPhoto library works over the past few versions. Drag and drop is handy, but is not a substitute for exporting, nor intended to be.

Info set query

Hello everybody,
I have a problem with the creation of info set (tcode : sq00 and sq02)
I need your help, i have to develop a query with a number Purchase Order and number of invoice.
For example : for a number of invoice : 5105617263
i have with TOAD (soft) this :
select distinct ekko.ebeln, rseg.belnr
from sapsr3.ekko, sapsr3.rseg
where ekko.ebeln = rseg.ebeln
and rseg.belnr = '5105617263'
and ekko.mandt = '350'
EBELN BELNR
4500013374 5105617263
4500014267 5105617263
I've tried to have the same result with an info set (sq02) and i have this :
Purchase Order Invoice
4500013374 5105617263
4500013374 5105617263
4500013374 5105617263
4500014267 5105617263
4500014267 5105617263
4500014267 5105617263
4500014267 5105617263
I dont know to develop in ABAP and i want to know if it's possible to have DISTINCT in an info set ?
Or which table can i use to have this ?
Thank you very much

thanks for your answers.
 
I tried to create a z programm with tcode SE38 but i dont have the key.
 
I would like to know if i can write this code on the tcode sq02 ?
 
this is my code :
 
FUNCTION /1BCDWB/IQG000000000487EXTR. 
 
""Interface locale : 
*" TABLES 
*" %SELOPT STRUCTURE RSPARAMS 
*" %DTAB STRUCTURE /1BCDWB/IQG000000000487 
*" CHANGING 
*" VALUE(%RTMODE) TYPE AQLIMODE 
*" EXCEPTIONS 
*" NO_DATA 
*" NO_AUTHORIZATION 
*" ILLEGAL_PACKAGE 
*" CURSOR_NOT_OPEN 
 
 
call function 'RSAQRT_SET_IDENTIFICATION' 
exporting iqid = %iqid 
 sscr_report = sy-repid 
changing rtmode = %rtmode. 
 
if %rtmode-pack_on = space or %rtmode-first_call = 'X'. 
 call function 'RSAQRT_FILL_SELECTIONS' 
 tables selopt = %selopt 
 changing rtmode = %rtmode. 
endif. 
 
call function 'RSAQRT_INIT_TEXTHANDLING' 
 exporting class = 'CL_TEXT_IDENTIFIER' 
 wsid = 'G' 
 infoset = 'REQUETE_EBELN'. 
 
if %rtmode-no_authchk = space 
and ( %rtmode-pack_on = space or %rtmode-first_call = 'X' ). 
refresh %auth_tabs. 
append 'RBKP' to %auth_tabs. 
append 'EKBE' to %auth_tabs. 
append 'EKKO' to %auth_tabs. 
call function 'RSAQRT_AUTHORITY_CHECK' 
 exporting 
 auth_tabs = %auth_tabs 
 auth_clas = 'CL_QUERY_TAB_ACCESS_AUTHORITY' 
 changing 
 rtmode = %rtmode 
 exceptions 
 NO_AUTHORIZATION = 1. 
if sy-subrc = 1. 
 raise no_authorization. 
endif. 
endif. 
break-point. 
 
data: %l_no_further_fetch type flag, " stop fetching 
 %l_hits_cnt type i. " cnt for %dbtab entries 
 
 if %rtmode-pack_abort = 'X'. 
 if not %dbcursor is initial. 
 close cursor %dbcursor. 
 endif. 
 exit. 
endif. 
 
if %rtmode-pack_on = space or %rtmode-first_call = 'X'. 
 if not %dbcursor is initial. 
 close cursor %dbcursor. 
 endif. 
 open cursor with hold %dbcursor for 
 select RBKPBELNR RBKPRMWWR RBKPWAERS RBKPWMWST1 EKBEBELNR EKKOEBELN 
 from ( RBKP 
 inner join EKBE 
 on EKBEBELNR = RBKPBELNR 
 inner join EKKO 
 on EKKOEBELN = EKBEEBELN ) 
 where RBKP~BELNR in SP$00001 
 and EKKO~EBELN in SP$00002 . 
endif. 
 
if %dbcursor is initial. 
raise cursor_not_open. 
endif. 
 
while %l_no_further_fetch = space. 
 fetch next cursor %dbcursor 
 into (RBKP-BELNR , RBKP-RMWWR , RBKP-WAERS , RBKP-WMWST1 , EKBE-BELNR , EKKO-EBELN ). 
 if ( ( %rtmode-acc_check = 'X' and 
 sy-dbcnt > %rtmode-acc_number ) 
 or sy-subrc <> 0 ). 
 %l_no_further_fetch = 'X'. 
 else. 
 check SP$00001. 
 check SP$00002. 
 call function 'RSAQRT_TEXTFIELD_REFRESH'. 
 %dtab-BELNR = RBKP-BELNR . 
 %dtab-RMWWR = RBKP-RMWWR . 
 %dtab-WAERS = RBKP-WAERS . 
 %dtab-WMWST1 = RBKP-WMWST1 . 
 %dtab-WAERS001 = RBKP-WAERS . 
 %dtab-EBELN = EKKO-EBELN . 
 append %dtab. 
 %l_hits_cnt = %l_hits_cnt + 1. 
 if %rtmode-pack_on = 'X' 
 and %l_hits_cnt >= %rtmode-pack_size. 
 %l_no_further_fetch = 'X'. 
 endif. 
 endif. 
 endwhile. 
 
if %l_hits_cnt = 0. 
 if not %dbcursor is initial. 
 close cursor %dbcursor. 
 endif. 
 raise no_data. 
 endif. 
 
if %rtmode-pack_on <> 'X'. 
 close cursor %dbcursor. 
endif. 
read table %dtab index 1 transporting no fields. 
if sy-subrc ne 0. 
 raise no_data. 
endif. 
 
endfunction.
 
if i can write this code on the sq02, where i must write this ? DATA ? INITIALISATION ? START-OF-SELECTION ?
Thank u very much for your help !
Edited by: missmiss25 on Oct 23, 2009 10:09 AM

Mic not working in audio creation m

hey all,
just bought my x-fi platinum and I got it home and tried to do some vocal recording.
my mic is a labtec desktop mic w/ noise canceling that I would like to use to record my podcasts with and it's plugged into the line in2/mic 2 port on the front panel 5 /4 box. I switch over to audio creation mode and set the first input to microphone and even with the volume knob on the 5 /4 box cranked up all the way all I get is static. the flexijack setting is set to microphone but when I directly plug my mic into the card itself I get nothing but static with that setup as well.

?i found http://www.muvaudio.com/?but that doesnt fix the problem?my mic jack only works in audio creation mode.. and thats not a fully functional grade A productthat is defecti've in some way.. could be driver?Message Edited by anwaypasible on 03-03-200705:20 AM

Using filter in selection sets during migration

Hi,
Can I use filter during creation of selection sets to select data related on a specific operating unit only?
If so how to achive that requirement?
Thanks,
Indu.

Yes, it is possible. You can use Financial Operating Unit Level Setup selection set. If you set filter (say OU100) at Operating Unit, then it would extract Inventory Organization, Payable Options, etc under OU100.
Please let me know if you are looking for something else.

Ksvcreate: Process(m000) creation failed

Hi All,
DB:10.2.0.3.0
OS:AIX 64 bits 5.3 L
Oracle Apps v12.0.5
Hi All,
Following are the error messages seen in the alert log files:
Sun May 3 10:00:29 2009
Process m000 died, see its trace file
Sun May 3 10:00:29 2009
ksvcreate: Process(m000) creation failed
Sun May 3 10:01:30 2009
Process m000 died, see its trace file
Sun May 3 10:01:30 2009
ksvcreate: Process(m000) creation failed
Sun May 3 10:02:31 2009
Process m000 died, see its trace file
Sun May 3 10:02:31 2009
ksvcreate: Process(m000) creation failed
Sun May 3 10:03:32 2009
Process m000 died, see its trace file
Sun May 3 10:03:32 2009
ksvcreate: Process(m000) creation failed
Sun May 3 10:04:33 2009
Process m000 died, see its trace file
Sun May 3 10:04:33 2009
ksvcreate: Process(m000) creation failed
Sun May 3 10:05:34 2009
Process m000 died, see its trace file
Sun May 3 10:05:34 2009
ksvcreate: Process(m000) creation failed
Sun May 3 10:06:35 2009
Process m000 died, see its trace file
Sun May 3 10:06:35 2009
ksvcreate: Process(m000) creation failed
Sun May 3 10:07:37 2009
Process m000 died, see its trace file
Sun May 3 10:07:37 2009
ksvcreate: Process(m000) creation failed
Sun May 3 10:08:38 2009
Process m000 died, see its trace file
Sun May 3 10:08:38 2009
ksvcreate: Process(m000) creation failed
In every 15 minutes interval, DB goes down.
Could anyone please share such an experience faced before.
Thanks for your time!
Regards,

Hi,
What changes have been done recently?
Review the following documents and see if it helps.
Note: 790397.1 - PROCESS J000 And M000 Die
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=790397.1
Note: 352388.1 - Problem: OMS CA: 10.2.0.1.0 Grid Control install Fails with many 'kvscreate: process(M000) creation failed' Messages in the Alert_Log
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=352388.1
Note: 747812.1 - DATABASE CRASH WITH SGA_TARGET
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=747812.1
Note: 730287.1 - Db Crashes With Ora-00449 and Ora-00601
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=730287.1
Note: 559011.1 - ksvcreate: Process(m000) creation failed after setting PGA_AGGREGATE_TARGET = TRUE
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=559011.1
Regards,
Hussein

Automatic TO creation inmediatly after TR generation

Hi,
Im doing an stock transfer through MB1B, movement type 301. When we save the document, stock appears in storage type 920 in negative quantity. Like the process does not finished ok.
I think it is a check in customizing, but I could not find it.
In other enviroment, it works ok, goods goes correctly to the other plant and the stock does not appear negative in the storage type 920.
The only difference I could find are two chechboxs in the transfer requirement that is not checked:
Auto.TO creation.
Indicator: Processing complete
Thanks in advance for the help
Regards
Enzo

Hi
Its a std process in SAP when you transfer the stock from one plant to another the system reserve the stock at interim storage type 920-Transfer and when you complete the TR>TO>Confirmation then the negative goes off.
In your case Automatic TO creation is not set up properly in Customizing thats y you are getting this issue.
Follow the steps below
For Immediate TO creation
1 OMLR - Set the Automaitc TO indicator A for the Movement type 301 for your warehouse
2 OMLZ - Tick the check boxes TO item can be confirmed immediately & Propose confirmation
Hope it helps
Karthik

Creation of bc sets?

Similar Messages

Maybe you are looking for