Creation Of Business Object

Hi all,
Can anyone help me in creating Z business object. I searched in the forum, But i didnot find any help.
Thanks,
Krishna.

Hi Pavan,
How !!!! I was searching for forums which are having discussions on Business objects creation issues.
Not library Links, But still they were useful for me and awarded and closed thsi thread.
If you can find any threads about this please provide me the links.
Thanks,
Krishna.

Similar Messages

Reg: SSO Creation between business objects to enterprice portal

Dear Experts,
Could you please send me some screen shots of creating SSO between business objects to enterprice portal.
Thanks& Regards,
KishoreJak

There is a very detailed blog series on the topic of integrating SAP Business Objects and Enterprise portal.
The SSO aspects are also covered there:
/people/ingo.hilgefort/blog/2010/03/29/sap-businessobjects-enterprise-sap-enterprise-portal--part-1-of-4
Let me know if you have any specific questions after going through it.
Thanks,
Shanti

Creation of Business Objects

Hello,
I have created Z BO using std BO image as Super Type. In the ZBO i have created my own method and event.
In this method i call a Z Function Module.
I have created Parameters for this method.
I have set the status of this Z BO to release.
I create container in WF and assign this BO in the D.Type Tab under object type radio button.
I create step 'Condition' and in this when i click to create the condition by calling the created container i cannot see the new method which i created under the methods.
I need this method parameter values to put a condition and proceed further in the WF.
Kindly suggest...
Cheers,
Madhu.

Hi Sam,
I have created the custom Bo from the Std Bo Image...
In the Custom BO i have created method with three parameters and a Event.
a) Importiing Parameter
b) Multiline Parameter
c) Exporting Parameter (Flag)
In the method which i have created i call up a Z function module which check takes the input from the the parameters and does validation inside.
If the validation is correct i get the Flag parameter empty else it will be 'X'.
If the flag is 'X' then i need to send a mail saying wrong data else a mail saying correct data..
So now when i execute the WF the process is done in background and it stops at the task step where i have done the binding..
the value of flag is not passed down and the WF stops saying
In-Process in the WF log..
Kindly Suggest..
Cheers,
Madhu.

Index creation failed in Business Objects Explorer

Hi,
I installed the Business Objects Explorer ...
But I can not index anything.
When I try to index the following message appears:
"Server, DRWBI001.PolestarIndexing, generated messages The Following:
Index creation failed. File system Polestar exceptions occurred on the server. Search for Polestar ERROR Within the servers log file for more details. (Can not create directory C: \ Program Files \ Business Objects \ BusinessObjects Enterprise 12.0 \ win32_x86 \ \ Index \ DRWBI001.PolestarIndexing \ InProgress \ ExplorationIndexes \ 35e98114-4831-A254-8dad-497fd3d4bb26 \-30_10.09.41 2010-06. 564) "
What should I do? help me please

I do not have UNIVERSE.
I'm trying to index files like Microsoft excel.
I have to do some configuration in the CMC to be able to crawl in Business Objects Explorer?
What should I do to crawl in Business Objects Explorer?

Step By Step Creation Of A new Business Object

hi,
Please Give Me Details Of A Business Object,like step by step creation of a new business object and it's utilization.

Create a business object (SWO1).
Give the business object name prefixed with Z_.
Enter the following fields with values:
Object type:      Z_TESTXX
This is the internal technical key. Page: 1
Object type can have maximum 10 characters. This must be unique across all object type. Objects are specific instances of object types at runtime.
Object name: Object_Name_for_XX
The object type is addressed with this name by external applications. This is a descriptive English name and can be up to 32 characters. This also must be unique across all object type.
Name:      Object Name: XX
This is a meaningful name of the business object.
Description:     Object Description: XX
Page: 1
Object description, can be up to 40 characters.
Program:      Z_TESTXX
Each object type has an ABAP/4 program in which methods of the object are implemented. This program is generated automatically when you create or revise an object type.
Application: indicates cross application.
3: Create an event.
Open the Object type in change mode. When you change your subtype the first step is to create a new event, this is done by selecting the Event node and clicking the create button. Give the event a name and a description. Next set the status of this object type component to implemented.
Event:          Z_EVENT_XX
Name:          Event name: XX
Description:     Event Description: XX
Click on the new event andu2026
Edit - Change Release Status- Object Type Component - Implemented
(A small box sign vanishes from the right side of the event, indicating that it is implemented)
There can be multiple triggering events for a standard/customer task.
In R/3 4.0 the release strategy for new Object Types and Object Type Components (methods, attributes, events, etc.) was enhanced. Now when an object type and/or components are created, there are different statuses to select, based on its required purpose. The statuses are:
u2022     Modeled - objects cannot be accessed at runtime. This is the status that is automatically set when an object type or component is created. Items with a modeled status cannot be referenced in any type of workflow task.
u2022     Implemented - objects can be used internally in a test environment. They are accessible, but may not be stable (especially if no delegation has been defined).
u2022     Released - objects are ready for production. Note: Local objects cannot be released.
u2022     Obsolete - objects are typically replaced by new functionality or incompatible with previous versions.   This status is optional.
4: Create a method.
Next a method must be created without using any function module template. When creating the method ensure that the method call is synchronous - this means that the method doesn't require a terminating event.
A method can be synchronous or asynchronous. Synchronous Method
Method that, for the duration of its execution, assumes the process control and, after its execution, reports to the calling component (work item manager, in this case).
Synchronous methods can return the following data, if defined: Return parameters, one result and Exceptions.
Terminating events can also be defined for a single-step task described with a synchronous method. At runtime, the relevant work item is then terminated either when the synchronous method is successfully executed or when one of the defined terminating events occurs.
Asynchronous Method
Method that, after its execution, does not report directly to the calling component (work item manager, in this case).
Asynchronous object methods do not return results, parameters or exceptions.
At least one terminating event must be defined for a single-step task described with an asynchronous object method.
At runtime, the relevant work item is only terminated if one of the defined terminating events occurs.
Next set the status of this object type component to implemented. The methods are not implemented unless you once open their program. Select the method and open its program. It gives a message u201CDo you want to generate a template automatically for the missing sectionu201D. Click u201CYesu201D. Inside the program insert the code u201CCALL TRANSACTION u2018FB03u2019. Display Financial Document.
Method:     Z_METHODXX
Name:      Method name: XX
Description:     Method Description: XX
Edit - Change Release Status - Object Type Component - Implemented
5. Create Key fields.
Create key fields with ABAP dictionary field proposal.
It is the identifying key, via which the system can access a specific object, that is, an instance of the object type. The key fields of an object type are usually also the key fields in the table containing the header data for the object type. Only character-based data types are allowed as key fields. The total length allowed for all key fields is 70 characters. Each key field refers to a field in the ABAP Dictionary.
Enter u2018BKPFu2019 in table name field and select all the key fields. Press Continue button. Next set the status of these key fields to implemented.
Edit - Change Release Status -Object Type Component - Implemented
6:Implement business object.
The whole business object needs to be implemented so click on the business object title andu2026
Edit - Change Release Status - Object Type - Implemented
Now you can check the syntax, generate the Business Object and then test it. Execute the custom method you created and give the Company code, Document number and Year.

Business object for transport request creation

Hi,
I want to know the business object for transport request creation. Kindly help.
Thanks and regards,
Venkat.

I am not sure but u can try this BO CTREQUEST.

Creation of Generic business Object for a standard transaction

Hi,
We have a requirement where we are depreciating the assets (standard transaction ABAA) using a custom BDC program. We need to maintain a history (called audit trail) for the particular asset that has been depreciated using this program. For this audit train we have been asked to use "Generic Business Object" in transaction code ABAA.
Unfortunately, Generic object services are not available in this transaction code. Can you please suggest me how to create "Generic Business Object" for a particular standard transaction code. Also, we have show the details of custom workflow that follows the approval process in order to depreciate the asset. how to show this workflow details using Generic Business Object. This is a very critical issue, any help will be very help ful.
Please let me know should you require more information on this topic.
Thanks,
Ashish

this is already answered in the forum, and also explained in the sap library

SAP Cloud SDK : Creation of Form using Business Object Error

Hi Experts,
I have created custom business object with object based screen and i want to create form for this custom business object.
I have tried using this.
Step 1. Right Click on Business Object and select Create Form option.
Step 2. Enter the require information and click on Next
Step 3. Select the element from the business object you need to display in the form
Step 4. Select the default language English and Next and Finish it,
After finish it the form open in adobe reader automatically but i am getting error as shown below.
and In the solution explorer i can see this.
Can anyone help me why it display the error while open the newly created form.
What are the software i need to install or add-ons in my system to open the from or remove this error.
I have installed the Adobe Life Cycle Designer For SAP Business ByDesign 135.0XXX, Adobe Reader X(10.1.3) , SAP Business ByDesgin Add-In Adobe Life Cycle designer.
Kindly any software missing or any add-ons require to be install or upgrade?
Many Thanks,
Mithun

Hello Alessandro,
I have solved the multiple line display in the table.
I have issue to display the no of character in the table.
I have Create custom business object and create the form i am using the TectCollection type in table level in businessobject node.
Case 1. This is my Entry1 in the business object and it display as shown below.
Here in the table "Undefined Text" is my 1000+ character text.
When i click on preview button the data display under the PDF as shown below.
Here the above screen we can see that the data comes perfectly in the PDF without missing data in table level.(Please i have not rename the columns name).
Case 2. When i Create new entry 2 and enter the multiple lines into the table as shown below.
Here in the above screen we can see that i have multiple row under the table.
When i click on preview button the PDF display with all the line under the table but the data is missing under the third column as shown below.
Here above screen display the same result but the in the yellow highlighted part full data not display as previous case 1.
Why the full data display in Case 1 and not in Case 2?
Is there any configuration to display data ?
Also i can not change the property of the page in form to "Allow Page Break with Content" this option is disable.
Kindly suggest me what is wrong in this PDF design.
Regards,
Mithun

Business Object Creation for OBN:

Hi
I am a very new user of the SAP EP.
I believe i have EP 6.0 on my machine.(How do i find out which release of EP I am using ?)
As part of my first step towards learning OBN, I tried to create a folder under "Business Objects". But, I do not get any screen/message, when I right click on the Business Objects and say New Folder.
What authorizations / permissions are required for the same ?
Thanks for the help.
Best Regards
Prasad

Hi Prasad,
To see the version of portal click on
System administration->support->version.In Version you can see the portal version ,J2ee details and KM details.
<b>Plz don forget points, if it helped.</b>
Thanks,
Harish.

SAP TM / Business object creation

Hi,
this my first posting, so please excuse that I am still searching for the right place to put my message ...
I hope this is the right group.
I have some questions concerning SAP Transportation management; I haven't seen a special group for that, so I am here now.
In SAP TM there are some business objects like shipment requests, shipment orders and so on. Is there any documentation available how to program with these objects?
I have found some ways to access them by going through the SAP source code, but that's sometimes very hard, and I couldn't find yet the place where the node ids for the nodes pf the object are created.
Best regards
Martin

Hi Keerthi,
thanks for your answer. I think that there is something different in the case of TM business objects. I can't see them in SWO1, and have not found any BAPI to handle the objects.
There is a transaction /TMSF/CONF_UI to display and change the business objects in SAP TM; and there are some menu items to create dictionary elements, access classes and wrapper classes, but they don't work (and I am not sure if this is the right way). In SAP TM source code, there are some general classes and interfaces that are used to access the TM business objects (like /SCMTMS/IF_LCP_FACADE), but they are all TM specific, so perhaps there is really a big difference between TM objects and other business objects. Maybe SAP has only chosen the same name for them.
SAP TM is still in an early phase of development, so I could imagine that there are still some missing things inside. But at least I managed to do some object access using the same methods as SAP did.
Best regards
Martin

Business Object creation error: The service mapping is missing

Hi developers,
In my CAF 7.1, I have my business object "maintenanceRequest" with several attributes.
Persistency is remote. Permission check is disabled.
Create operation is mapped to the external service (enterprise service) createMaintenanceRequest.
The input fields are mapped, output fields are not mapped since create operation doesn't have any.
All the other operations are not mapped.
I have exposed as web service the operation "create",
I have generated, built and deployed the app.
When I try to run it from wsnavigator I get an error in the SOAP response:
com.sap.caf.rt.exception.CAFCreateException: The service mapping is missing
Please note that the ES works ok (e.g. from Visual Compose 7.1).
The ES was imported in NWDS 7.1 from service registry.
Can anyone please help?
Thanks, regards
Vincenzo

Hi Sampath, thanks for your helpful reply.
I followed the steps from saphelp, but I get errors.
I mapped my external service destination (an R/3-based Enterprise Service published in service registry) to:
- UDDI_DESTINATION (error: objectNotExist) [but the ES is correctly published in service registry]
- wsdl address in backend R/3 system (error: Deserializing WSDL stream failed)
how should the logical destination be configured?
Thanks a lot
Vincenzo

Creation of login object failed

Hi all,
I've got a problem with the mobile client development.
We are using the mobile client for many years and we even develop a lot with it, but now i have a problem never seen.
After extending a bDoc and start testing the application, after the generation and login, system states "Creation of login object failed".
So i did a full generation. Result the same.
I debugged the ValidateLogin class and found out, that in the following statement is failing
       BOLOGIN = BusinessRootObject.BusinessFactory.LoadBusinessObject("LOGIN", determineUser)
BOLOGIN is Nothing at the end. I tried out to create the Object via        BOLOGIN = BusinessRootObject.BusinessFactory.CreateBusinessObject("LOGIN")
same result. Next i tried to create the BOACTIVITY and it failed as well. One day before everything was fine, even with changing business documents.
The error in the VB.ERR object says:
-     err     {Microsoft.VisualBasic.ErrObject}     Microsoft.VisualBasic.ErrObject
     Description     "In der Methode BusinessFactoryCore.LoadBusinessObject ist eine System-Exception aufgetreten"     String
     Erl     0     Integer
     HelpContext     0     Integer
     HelpFile     ""     String
     LastDllError     3     Integer
     Number     5     Integer
     Source     "MTBLLFW"     String
Can anybody please give a hint.
We are using CRM 5.0 SP7 and MSA SP7 on MS 2003 Server with local repository. DB is SQL2000.
Yesterday i was releasing a changelist and now its no longer working at all, what a mess.
Thanks to all,
Andreas Rose

Hi Andreas,
The problem may be incorrect or corrupt ARSREP.DAT file.
The reason may be that the BDOCs are not synched from MAS. Once you sync this through MAS you will find the *.bdoc files at the location
mentioned under the registry key HKLM\SOFTWARE\SAP\MSA\MW\TL\BDocPath
Usually this would be default as C:\Program Files\SAP\Mobile\tpsfiles.
After this when you generate the BusinessLibrary the Arsrep.dat file
will have the *.bdocs incorporated in the Arsrep.dat file.
Hope this helps.
Regards, Gervase
ps. For synching the BDocs refer to SAP Note 942942

Failed to retrieve the data source in Business Objects Explorer

I have built a universe with Designer suits and separate measurements of paramentros and bound by, ran on Web Intelligence, but when I try to use the Business Objects Explorer is reported the following message:
Failed to retrieve the data source details.
The creation of the data source object tree failed
What should I do?

There are two OSS notes about this error ;
1411433
1363777
Also you can take a look at this service pack
http://ftp1.businessobjects.com/outgoing/CMS/crXIwin_en_sp3.pdf
cheers
Tansu
Edited by: tansu aksu on Jan 25, 2011 5:03 PM

PortalRuntimeException in Business Object document iview No portal component associated with the following context

Hi all,
We are stumped with a problem in our QA Enterprise Portal (7.3.1 Sp7) that throws a portal runtime error when we preview a Business Objects document iview. The Business Objects Server versions are 4.0 SP5 and/or 4.1 SP3.
The error is caught in the the defaultTrace file, /usr/sap/QNW/J00/j2ee/cluster/server0/log
[EXCEPTION]
com.sapportals.portal.prt.runtime.PortalRuntimeException: There is no portal component associated with the following context:
pcd:portal_content/com.summit.SES_BI/com.summit.iviews/Daily_Margin
at com.sap.portal.prt.component.PortalComponentContext.<init>(PortalComponentContext.java:93)
Here is what we have tried
* Confirmed the iviews exist in the PCD, by browsing to the content folders and right lick, preview on the iview.
* Our PRD and DEV systems work correctly and are on same versions of EP Runtime and java. 7.3.1.7.0.201..
* Occurs with all Businessobjects iviews from the QA portal and all doc types, webis, dashboards. Tried creating new iview.
* Reapplied the com.sap.businessobjects.iviews.templates.epa to the Portal from t he BI 4.1 SP3 distribution
* Deleted and recreated the BI portal system connector using the SAP BOBJ system template set path to http://bi-qas:8080/BOE
* Set the embed key value in the BI system connector property and in the custom global.properties file, restarted tomcat and SIA services
* Set permissions for everyone end user on the content folders and the BI system connector
* Confirmed Single sign on configured correctly between BI and Portal
* Confirmed that the QA BI server is configured correctly by directing the working DEV Portal to the QA BI server.
* Performed actions in note 1709737
We are certainly stuck and the defaultTrace file is not very informative. Any suggestions are greatly appreciated
Lee Lewis

This is resolve with note 1615838 - SAP Netweaver Enterprise Portal 7.3 iView creation with BI 4.0 results in exceptions.
The note includes a file portalapp.xml that need to be inserted into com.sap.businessobjects.iviews.par that is included in the BI server distribution.
Then deploy the ear file.....
Odd thing is that the note mentions 4.0 and we are on 4.1 SP3...
Environment
SAP BusinessObjects BI Platform 4.0 SP02 Patch 4 or lower
SAP Netweaver Enterprise Portal 7.3
Lee Lewis

Open Business Objects report with J2SE

Hi, How can I do to open a Business Objects report with J2SE aplicattion?
Thanks,

Depending on the version of Crystal Reports / Business Objects you have, there are Java libraries you can use to connect to the Business Objects Application server. I spent a lot of time on BO's website figuring it out. In the end i only needed a few libraries to connect, and ask the server to print a report. I remember that there was a way to have the server send a pdf as a binary stream, that you could then save as a pdf file and read. You can do a lot more with the SDK, to the extent of creating your own report creation tool. If you would like some specifics, i might be able to find the some of the documentation i used. It all came from the BO website.
Wish i could be more help
chip.
Edited by: Chipper on Mar 3, 2010 3:29 PM

Creation Of Business Object

Similar Messages

Maybe you are looking for