Creation of business transactions with product information from a campaign

Hi,
I need to create business transactions from a campaign execution, but I need that these business transactions are created with a specific product and quantity 1.
Is this possible?
I tried to assign Products on Product tab of campaign, and to assign a document template in Campaign, but nothing worked.
Thanks a lot.
Susana Messias

Hi
you can create business transactions from campaigns executed useing the following settings
in order to create the transaction after executing the campaign you need to maintain following custimising settings
Define communication medium
select the channel for which you want to create transaction automatically under communication medium and select communication meathod and transaction type assign the under define communication meathod assign ther the transaction aganist the internet mail SMTP to the transaction type to it and you can use appropriate BADI for assigning the product with the quantity as you desired
reward points if helpful
regards
Dinaker vikas

Similar Messages

Create business activity with products

Hi,
I am Trying to create a business activity with products. Adding Activity Journals TAB in the activity u201CBus Act.:With Prodsu201D. The issue is that when I am trying to make a Journal template type in (CRMM_JOURNAL : Define Activity Journals) I am not getting my own transaction type under Transaction Type option (I have copied my own transaction type from the standard u201CBus Act:With Prodsu201D activity). I only get the standard activity type (0020 :Bus Act.:With Prods) in my drop down box. (attached is the screen shot)
Any ideas
I am using SAP CRM 5.0.

Hi,
first your transaction type has to be active.
Next, you need to assign item categories ACT0, ACT1 and ACT in SPRO, in order to use activity journals.
All three.
Regards

Creation of Business Partner with External BP #,ID type and Identifications

Hi Group,
I have a query on creation of Business Partner with External BP #,ID type and Identification # (along with the Firstname,Lastname,Email, Phone & etc.,) things.
the thing is that I was using a BAPI called "BAPI_BUPA_FS_CREATE_FROM_DATA", to create a BP and I was not able to have an option available for these things (External BP #,ID type and Identification # ) along with that BAPI.
So please kindly let me know how these things can be fetched from a BAPI which can accomodate all the above things mentioned.
Please kindly let me know how it can be achieved.
thanks in advance.
Regards,
Vishnu.

Hi Gerhard,
Infact this reply was very useful, but ,while using the BAPI "BAPI_IDENTIFICATION_ADD" while creating the Id type and Id #s, this BAPI was not enabling this.
I was trying to use this BAPI to create ID #, and it's desc, but, this BAPI was returning like "This BP # does not exist" (in some cases) and in some other cases, it is keeping quiet without giving any indication as whether the things have been updated or not... and also when I checked, things were not getting reflected.
your help would be very much appreciated.
thanks & regards,
vishnu.

Extract software product information from SLD

Hi Colleagues,
I am wondering how to extract software products information from SLD.
I need application and version of the product. For example Sap NetWeaver version 7.11.
I read the business systems:
CIMInstancenameList businessSystems = client.enumerateInstanceNames(CIMNames.C_SAP_BusinessSystem);
// get clients for Business Systems
            for (final Iterator<?> iterSystems = businessSystems.iterator(); iterSystems.hasNext();) {
                final CIMInstancename system = (CIMInstancename) iterSystems.next();
                final IBusinessSystemDto dto = new BusinessSystemDto();
                list.add(dto);
                dto.setName(CIMUtil.getKeyValueByName(system, CIMNames.P_NAME).getValue());
How can I get product information about business systems.
Do I have to get it from the system or from the client or there is another way.
Thank you in advance.
Best Regards,
Dimitar

Hi,
Whatever business system you have registered in your central SLD, that information you can get it by logging to SLD.
Thanks
Sunny

My new Iphone 4 is restoring with the information from my old Iphone 3gs on itunes. How do I restore it back to 4g?

My New Iphone 4 is restoring with the information from my old IPhone 3gs on Itunes. How do i get it to restore back to the 4g?

There is no 4g.
If you don't want to restore it with your old iPhone information, then just restore as a NEW phone, not from the backup. Don't quite understand what there's not to get. :-|

Updating transaction MD61 using information from inbound IDOC

Is there any standard IDOC type for Planned Independent Requirement(having fields of table PBED and PBIM in its segment)?If such an IDOC type doesnt exist then i have to go for custom idoc type creation
I have an inbound IDOC having 4 fields in its segment
1.SAP Material number
2.Plant
3.Plant Quantity
4.Requirement date
Now i have to use this information in IDOC to update transaction MD61(create a planned order).
constraints:
in MD61 screen1
SCREEN 1
Material radio button is defaulted to on. This must also be set in the interface. Material number will be valued from the input file.
Plant will be valued from the input file.
Version number defaults to 00, so that value should also be used for the interface.
Planning Horizon From and To dates will be the same date and valued from the input file.
Planning Period should be set to D for Day
SCREEN 2
Material number should default from SCREEN 1 input. The interface should also do this.
MRP Area will default from the Plant on SCREEN 1 input. The interface should also do this.
Version will default from the 00 on SCREEN1. If needed on interface, also default to 00.
Version Active checkbox will be checked by default.
Base Unit of Measure will default from material master.
Only a single date column will appear which should be the date input on SCREEN 1. Value this column with the quantity from the input file.
Input fields are highlighted in screenshots below.
After input is complete, use the SAVE icon to store the data.
Kindly tell me the approach to prepare this interface?

Done,used BAPI_REQUIREMENTS_CREATE TO DO SO

BADI for restrict creation of business transaction independently

Hello Experts,
I have a requirement where I need to check if the Business activity (say any 'Z' transaction) has a opportunity follow-up document then only that business transaction need to be executed else should give the error that "Z transaction need to be created through opportunity only and can not be created individually".
I found one BADI CRM_ORDERADM_H_BADI where I can check for the condition but the issue is that as soon as I entered to CRMD_ORDER this BADI gets triggered where I need to trigger this BADI only when the user is trying to create the 'Z' business transaction individually.
Any Suggestion will be highly appreciated.
Thanks in Advance & Best Regards,
Deepak Gupta

Deepak, there is a parameter called CRM_MODE and this has the following values depending upon the transaction context:
A - Create
B - Change
C - Display and
D - Delete
Now, in the same BAdI, since you are restricting the creation of the activity, check the CRM_MODE for the Activity, if it is A, then, call the function module CRM_ORDER_READ with the GUID of the activity and extract only the document flow ET_DOC_FLOW. Check this export table and see if the parent is an opportunity (BUS2000111). If your condition is not met, add an Error message in the transaction.

Enhance Business Transaction with table

Hi,
I have to enhance a Business Transaction (Sales Contract) with a table, but I can´t see this option nor EEWB or AET. I can add fields in both tools, and I can also add a table, but only for BUPA, not in Business Transaction. This table for add is going to be viewed in WebUI.
What can be done?. Thank you in advance for your help.
Regards,

HI,
You can create this using AET table. Fiest open your Sales Contract Document then click Configuration butoon you have to choose which area to configure afetr that you will get popup in that click enhanced fields there you can see
Regards,
Deepika.

Cash Journal - Business transaction (Expense) - Tax information

Dear all,
When I post a business transaction (type E - Expense) via Cash Journal FBCJ, by example: Payment for flowers, I want to add Tax information into this document (i.e: VAT number) for reporting later. But I don't know where to input this information. Could you please help me ?
Thank you very much for your help,
Best regards,
Sylvecat

hi,
there will be one tax column in that u can give the tax code, if u want to give vat number like that means u can give it in the vendor master record.

Query with collective information from MD04 in detail

Hello gurus. I have a question about Infosets.
Iu2019ve being asked to create a query that shows the information from transaction MD04, but for multiple materials. It should be a list that essentially lists every MD04 record for material in our plant, one after the other.
I found a Function called MD_STOCK_REQUIREMENTS_LIST_API which contains this information. The problem is, this function exports the detailed data to a structure called MDEZ and the header data to a separate one called MDKP.
I created an Infoset using u201CData Retrieval by programu201D and I typed MDEZ as the structure. I then coded the retrieval of data under the u201CData Reading Programu201D tab.
The problem is, the MDEZ structure inside Function MD_STOCK_REQUIREMENTS_LIST_API doesnu2019t have the material number; this is exported to a separate one called E_MDKP.
My question is; how can I also have the contents of MDKP added to this Infoset? When I create it, it only lets me use one single structure, I cannot also add MDKP.
I tried creating an additional field just for the MATNR, but those extra fields cannot read what I coded under the u201CData Reading Programu201D tab. I tried to use a second internal table to drop the values of E_MDKP, and then loop it to fetch the MATNR, but I canu2019t add it to the additional field nor can I add it to a second structure.
I made a query and it shows the MDEZ data correctly; I get one line per item found in MD04 for the materials I imported from our Plant, but I donu2019t know which material is which because that info is in the other structure MDKP.

Thanks for your reply. if you don't mind me asking, how can I create my own structure to add it to the Infoset?
When I create the infoset, I can either make from a Table Join, a Logical Database or data Retrieval. In the Table Join I cannot use structures, and under Data Retrieval, I can only use one of them.
Is there a way to create a temporary (or permanent) structure that would contain MDEZ and the extra field MATNR that I need?
Please advise.

Possible to test Dev Transaction with Production data in eCatt?

Hi,
I am new to eCatt but got the impression that it was possible to test your transactions in dev with the data in production, presumably through an RFC connection.
Is this at all possible?
Thanks,
Will

Hi Will,
with RFC your are right, but your direction of thinking is wrong.
eCATT lets you develop testscripts in one (central test) system and execute them in and against other systems.
Means, you can write your scripts in a Solution Manager and then execute it via RFC connections against ERP-development
or ERP test system with their specific ERP data.
Please take a look into the eCATT [Online Help|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/d0/e3933f09a5fb47e10000000a114084/frameset.htm]
Hope that helps to understand better distributed testing.
Best regards,
Christoph

Trigger transaction with Enqueer action from ME activity

Hi there,
I'm trying to execute a transaction of MII from ME with an activity hook (MIITransactionExtension).
All actions in the transaction are well done until the enquerer action is in line.
This action returns the following exception
Enqueuer.execute(): Error in enqueing the message: while trying to invoke the method java.sql.Connection.prepareStatement(java.lang.String) of a null object loaded from local variable 'connection'.
Has anybody an idea?
Sebastian

I made a call to this topic.

Automatic Remittances Creation Program (SRS) fails with ARZCAR: Error from main.

Gurus:
We have this request that fails - but only at 4am (other scheduled runs it completes fine)
The error is
ARZCAR: Error from main.
Any ideas much apperciated!!
11.2.0.3
11.5.10.2
RHEL 5

+---------------------------------------------------------------------------+
Receivables: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
ARZCAR_REMIT_SRS module: Automatic Remittances Creation Program (SRS)
+---------------------------------------------------------------------------+
Current system time is 11-NOV-2013 04:00:24
+---------------------------------------------------------------------------+
BATCH Date : 2013/11/10 00:00:00
Convert date parm
prepay_flag: <N>
Exception Code <1>
Batch ID: <>
main: Error from Batch Id Generation.
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
04:00:24 :Auto Remittance Batch Generation
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
Successfully resubmitted concurrent program ARZCAR_REMIT_SRS with request ID 19366567 to start at 12-NOV-2013 04:00:00 (ROUTINE=AFPSRS)
+---------------------------------------------------------------------------+
Executing request completion options...
Finished executing request completion options.
ARZCAR: Error from main.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 11-NOV-2013 04:00:24
+---------------------------------------------------------------------------+

Assigning Layers to Null with Tracking Information from Mocha for AE...

Ok so I'm working a composite and I've tracked my shot in Mocha for AE and applied that data to a null object. Im wanting to attach a layer that
i want to stick in the shot to the null object. I have updated my After Effects CC to the latest 13.1.1.3 update. Before this update i could you the the little circle
icon on the timeline layers box to attach. with this update it appears to not be there anymore? Am i missing something? What do i need to do? Its really annoying!!

What "little circle" rather than lose yourself in vague descriptions, provide screenshots.
Mylenium

Function module for creation of Installed base along with product

Hi,
Function module for creation of installed based with product for the business partner.

Try
BAPI_IBASE_CREATE
IB_IBASE_CREATE
IB_IBASE_CREATE_INITIAL
CRM_IBASE_COMP_CREATE
CRM_IBASE_CREATE
IB_COM2_CREATE_IBASE
IB_COM_CREATE_IBASE_INITIAL
Regards,
Kaushal

Creation of business transactions with product information from a campaign

Similar Messages

Maybe you are looking for