Creation of catalog code for mic(qualitative)

Hi, in qs21, whe i clicked on catalog, nothing codes are appearing. i want to have "yes" and "no" codes for qualitative characeristics. pls advise how to create those codes and assign here in mic?

Hi,
QS41 where youy can create Code group.,then their you can define codes
For qualatitive MIC when you enter t code QS41 select option Catlog--Charectristic attribute ,oress enter
In next screen click on new entries ,give code gr name ,discription .press enter ,
Select same code group double click on codes where you can define codes.
Then go in QS51 It is plant level ,again give plant number ,catlog 1 ,enter.
press new entry give here selected set name ,discription ,released
Enter .
Select same line item double click on selected code where you can select different codes from different code group.
Regards
SANIL

Similar Messages

  • Creation of Transaction code for Reports created in FGI1.

    Hi all,
       We are in ECC 6.0 version. We have created one report for Profit Center Group Wise Receivables with transaction code FGI1. When we executed the report from FGI5 , it was showing the values correctly.
       We created the t.code for the report painter programe and tried to execute. The screen is different from that of T.Code: FGI4.  When we executed , it was not showing any values. I created authorisation for the report and also for the transaction codes.
       Appreciate your suggestion at the earliest.
    Thanks
    Dasa

    Hi
    Check TSTCP table  for the existing t-codes and for creating check this link
    Re: Transaction Code Creation for a Table/View
    Regards
    Pavan

  • Question on creation of t-code for SAP query

    Hello,
    I posted a thread in here back on 06/20/2007 asking for help on creating a t-code for a SAP query. one of the responses that I recieved was
    <i>"Sure, all you need to do is get the report name which is generated by the query. You can find this in SQ01, select the query and from the menu, Query, More Functions, Display Report name. Then go to Se93 and create the tcode with this report name."</i>
    the report name was AQFKZFINANCE====GL_FRANCE=====.
    I created the t-code using this name. I had it transported to my QAS system an now we are getting a error stating that the the program is not found.
    When I check in SE38, I can see this program AQA0ZFINANCE====BP_RECON====== in both my development system and my QAS system.
    Should I have created in the t-code using the AQA0ZFINANCE====BP_RECON====== instead of the AQFKZFINANCE====GL_FRANCE===== program? 
    Is there any reason why the program AQFKZFINANCE====GL_FRANCE===== would not be in QAS?
    I do not have access to SQ01 in our QAS system so I cannot perfrom the process stated above.
    thanks in advance for the help.

    Hi,
    Please check this thread perhaps it may help.
    Re: How to create TCode for Sapquery
    Regards,
    Ferry Lianto

  • Creation of transaction code for the table created

    Hi Experts,
    Can any one help me out with the steps that are used for creation of transaction for the table using the transaction SE93, i have created the table maintance generator.

    Hi
    Check TSTCP table  for the existing t-codes and for creating check this link
    Re: Transaction Code Creation for a Table/View
    Regards
    Pavan

  • Creation of Process code for output type

    Hi,
    Could someone help me out in defining processcodes for output types.
    Thanks in advance,
    Yaseen

    Hi Yaseen,
    The Tr.code WE41 and WE42 are also used for maintaining process codes.
    To maintain process codes in WE41 or WE42, Go to these Tr.Codes and Click on the Change button. Then click on "new entries" button to create your new process code.
    FYI, Outbound process codes are stored in SAP Table TEDE1 and inbound process codes are stored in SAP Table TEDE2.
    Hope this helps.
    Rgds,
    Sam Raju
    Message was edited by: Sam Raju

  • QM: Which table we get Inspection catalog codes by using MIC

    Hi,
    I am having Master Inspection Characterstic(MIC) and plant by using this I need to get Inspection catalog codes qualitative(ex:YES/NO).
    Please provide a link table or provide function modules for Inspection catalog codes
    Thanks,
    Mahahe

    Hi,
    Can you please explain me what you want to make ,maybe i will help you out...well to have Inspection catalog codes using MIC you can have table QPAC(Inspection catalog codes for selected sets).
    i hope this will solve your problem.

  • Is it possible to sort the catalog codes?

    Hi
    We use catalogs on notification for object, part, damage etc.
    The code is numeric.
    But for the user it can be difficult to find the correct code to use, as the list is not sorted.
    Is there a way to sort the list of catalog codes on the description field?
    Best regards
    Tom

    Catalog codes are not linked to technical object types but, fundamentally should be linked so as to give more clarity to the thought process. For e.g, you have centrifugal pumps as technical object type, you can have catalog codes for either for this object type or it can me made common for all pumps.
    Now for damage, cause, activities and tasks, you can actually maintain the few codes same across catalog profiles. For e.g. pump, gear box, compressors, etc the codes of damage can be 0010-Broken, 0020-Leaked, etc. The only catalog code group, which will change is the object part as it will vary with equipment types.
    This will actually help you in running your reports effectively. For e.g. you can look for all failures, which were due to 'Leaked' as the damage.
    I hope this helps.
    Regards,
    Ketul

  • Downloading the data of catalog types / catalog / codes

    Hi Friends,
    We have the catalog types, code groups, codes, selected sets defined in SAP.
    How can I download them directly from SAP.
    Kindly help.
    Regards,
    Naren

    You can load these directly from the tables using SE16.
    QPAC                           Inspection catalog codes for selected sets
    QPAM                           Inspection catalog selected sets         
    QPCD                           Inspection catalog codes                 
    QPCT                           Code texts                               
    QPGR                           Inspection catalog code groups           
    QPGT                           Code group texts                         
    Craig

  • Selected Sets for Catalog code - 9

    Dear all,
    I am aware that Selected sets can be created only for Catalog type 1 & 3. But in our business we have classified different type of defect codes in type 9. Evenhough I am attaching specific catalog defect type in MIC, when I see it in the notification screen, whole list of defect type is showing. Is there any possibility to group the defect codes according to the plant? (For your info - We have 4 different plant and each one of them has to use different catalog type as product manufactured is different)
    Regards,
    R.Ponniah ;

    hi,
    Use catalog profile  for specific defect type, plant wise it is not possible in std SAP, better to define catalog profile and assign all defect type code grp. in that profile and assign that profile with ur notification type. goto config (SPRO)-> Quality Notification>Defect Recording-> define notification type----> and maintain all in that pop- up one by one.
    Defect type is not plant specific.
    Regards
    Edited by: D GURU on Jan 17, 2012 8:26 AM

  • SAP is allowing the creation of PO's for C.codes for non extended vendors

    Hi Gurus
    SAP is allowing the creation of purchase orders for company codes to which the vendor has not been extended.  An example is PO 4500XXYYZZ for vendor number 9010577.  The PO was created for company code 1111, but the vendor is not extended to company code 1111.
    Please suggest how to avoid the above transaction by throwing an error.
    Thanks
    Sada

    Yes, this is SAP Standard Behaviour Only. System Will check Whether the Vendor Hasbeen Maintained at Purchase Orgn Level during Purchase Order Creation.
    During MIRO only System check whether the Vendor is Maintained at Company Code level or not Else it will not allow to Post Invoice.
    You can Control this by Restricting Users to Use MK01 and Give Access to XK01
    Else Use the Following Enhancement :
    MM06E004 EXIT_SAPMM06E_004
    Contact your abaper and Fulfil your Requirement.

  • Transaction code for Creation of Material

    Hi Code Guru's,
    can any one please tell me the Transaction code for creation of material.
    regards,
    Syed Khutubuddin.
    Edited by: Alvaro Tejada Galindo on Apr 14, 2008 4:45 PM

    Hi syed,
    Goto T.code MM01 then create Material name,
                       MM02  is change Material name,
                       MM03 is display Material name.
    <REMOVED BY MODERATOR>
    Cheers,
    S.Suresh.
    Edited by: Alvaro Tejada Galindo on Apr 14, 2008 4:46 PM

  • Transaction code for mass creation of physical Inventory document

    what is the transaction code for mass creation of physical Inventory document.

    MI31 is the transaction to create hundreds of physical inventory documents for annual inventory at a time.
    MICN can create several documents at a time for cycle count.
    Just look in the menu of phyiscal inventory into the knot Sessions, there are even more e.g. for counting of own stock a customer and vendor location, for vendor stock at own location etc.

  • Transaction code for creation of a specific customizing table ?

    Hi,
    What's the transaction code for creation of a specific customizing table ?
    Thanks in advance.

    Carl,
    if you can share with us from which t-code you achieve this , than it would be better for we guys.
    Amit.

  • Transaction code for creation of  transaction keys in obyc

    Dear Experts,
    Can u tell me what is the transaction code for creation of transaction keys in obyc asap.
    Thanks & Regards,
    Radhika.

    Hi
    There is no TCode and the path is
    SPRO-Material Management-Purchasing-Conditions-Price Determination....
    Cheers
    Srinivas

  • Need code for Sales order creation in oops using xi as integration server

    Need code for Sales order creation in oops using xi as integration server.

    hi rocky,
              could you pls give a bit explanation on what you are expecting.
    regards,
    Pavan

Maybe you are looking for

  • HT204053 What if I share the iPad with another user?

    How does iCloud work on the iPad if you share it with another user with their own account?

  • Database polling performance issues

    I am using Database polling to detect database changes for OLTP application. my doubts are 1) will it affect performance of OLTP application 2) If so what would be the impact on OLTP application 3) How we can improve performance 4) any link to get mo

  • Create a DVD movie using AVI clips stored on my I Book G4

    I need to know how to create a movie to be read by any DVD player. I have my project set up as a I-movie project with I-Movie HD 5.0 but I don't know how to convert it. Using Magic Movie creator, it doesn't work because I have to camcorder connected

  • Flash Player not working for Youtube

    I have Windows Me (yes im very old school) and am using Internet Explorer and for some reason flash player 9.0 will not work for youtube. I was just on youtube, watching some video, listening to music and it was working perfectly fine. I clicked on a

  • What is a "sync UI Handler" error mean?

    What does a "sync UI handler" error mean? This happens when I try to sync with my PC in itunes. It tells me there are three conflicts that occured when I synced, 2 calendar and 1 music.