Creation of catalogue file.BAPI to FILE scenario.

hi,
I am currently working on a RFC to file scenario.
The requirment says a catalogue file needs to be created at target.Please tell me what a catalogue file is?how is it created?

Hi,
   Please check the following links regarding catlogue files,
   nothing but PDF,JPEG,Tiff files.
   http://peccatte.karefil.com/software/catalogue/catalogueeng.htm
http://www.sagehill.net/docbookxsl/WriteCatalog.html
regards
mahesh.

Similar Messages

BAPI to File Scenario

Hi Everybody,
Greetings!!!
I am new for XI, pls help me to sort out the queries given below:
1. Can u all help me out for step by step procedure to be followed for BAPI to File Scenario. (Guide me all configuration step to be performed in R/3 & XI)
2. Also, pls tell me how to configure BAPI in ALE (I am using BAPI_GOODMVT_CREATE)
3. Also, guide me in Value mapping in XI. (Eg: if the value is A then it should call BAPI_GOODMVT_CREATE, if the value is D then it should call BAPI_GOODMVT_DELETE and if it is U then BAPI_GOODMVT_CHANGE) - Give me code if it is necessary in case of JAVA mapping.
I will appreciate you for quick response and solve my probs.
Regards/Guru

Hi Guru,
<i>Can u all help me out for step by step procedure to be followed for BAPI to File Scenario. (Guide me all configuration step to be performed in R/3 & XI)</i>
1) Go to transaction sm59.
2) Give some name.
3) Connection type TCP/IP.
4) Activation Type Registered Server Program.
5) Give some programid. You have to use this program id in RFC sender communication channel.
6) In gateway host give the host name of R/3.Give gateway service.
Before testing this connection create a RFC sender communication channel in XI.There specify the parameters like R/3 hostname,program id created above, authorization credentials for R/3 etc.Then activate the communication channel.Then test your TCP/IP connection in R/3. You have to test connection only after you create RFC CC in XI because it will go and check for the program id in XI.
You will need to schedule a JOB in your R3 system that will call the RFC during every time perdiod.
<i>Also, guide me in Value mapping in XI. (Eg: if the value is A then it should call BAPI_GOODMVT_CREATE, if the value is D then it should call BAPI_GOODMVT_DELETE and if it is U then BAPI_GOODMVT_CHANGE) - Give me code if it is necessary in case of JAVA mapping.</i>
Your requirement can be easily met using the Extended Reciever determination that we have...
Here actually based on condition from the message in the payload u can assign your receivers..
Below is the steps to do the same...
Under Receiver Determination --> Configured Receivers --> Specify the 2 receivers and beside the same you have an option called condition, there you specify the condition on which it has to go to the first system and then the condition on which it has to go to the second system.
When you click on the codition it will open another window (Condition Editor window) under which you have a Left Operand which when you click will open up another window(Expression Editor window), there for your need you check on the XPath radio button and then click on the field whose value you wanna check from the structure that it displays, when you click on the field it fills in the XPath Expression, then click ok.
After that it takes you back to the previous window(Condition Editor window) with the Left Operand having the XPath Expression, so all you will have to do is to fill the Right Operand which is nothing but the value you want that field to contain.(For Example if a field "A" that you have selected which comes in the XPath Expression in ur Left Operand,has a value "1" in your Right Operand)
There you also have an option to put in an "and" or an "or" condition if required(For Example if you wanna check if "A" and "B" is satisfied or it you wanna check if "A" or "B" is satisfied, this can also be done)
I also suggest u to go through these blogs..
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
/people/shabarish.vijayakumar/blog/2006/06/07/customise-your-xpath-expressions-in-receiver-determination
If you have any doubts or clarifications on the same, please do ask and i will tell you how to proceed.
Regards,
Abhy Thomas

Production Time Issues on IDOC---File Scenario

Hi All,
We have done all the IDOC--File scenarios Successfully in DEV System.
Now its time to Production and Go-Live.
Q1) Assume If Bulk messages are Failed in RWB-----Receiver CC Due to some error, Then how to Handle these Error messages
Regards
Suman

Hi Mahesh,
This is My Trace File
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="B" name="IDX_INBOUND_XMB" />
- 
<Trace level="1" type="T">User: 116866</Trace>
<Trace level="1" type="T">Language: E</Trace>
<Trace level="1" type="T">ALE-AUDIT-IDoc-Inbound Handling</Trace>
<Trace level="1" type="T">IDoc-Inbound-Handling</Trace>
<Trace level="2" type="T">Tunneling needed?</Trace>
<Trace level="2" type="T">Partytype = LS fallback to logical system</Trace>
<Trace level="3" type="T">Sender Interface</Trace>
<Trace level="3" type="T">WP_PLU.WP_PLU03 urn:sap-com:document:sap:idoc:messages</Trace>
<Trace level="1" type="T">Syntax-Check-Flag X</Trace>
<Trace level="1" type="T">IDoc-Tunnel-Flag</Trace>
<Trace level="1" type="T">Queueid</Trace>
- <Trace level="1" type="B" name="IDX_IDOC_TO_XML">
<Trace level="1" type="T">Get the Metadata for port SAPPIS</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="2" type="T">IDX_STRUCTURE_GET Details</Trace>
<Trace level="2" type="T">Port : SAPPIS</Trace>
<Trace level="2" type="T">IDoctyp : WP_PLU03</Trace>
<Trace level="2" type="T">Cimtyp :</Trace>
<Trace level="2" type="T">RFCDest :</Trace>
<Trace level="2" type="T">Release : 700</Trace>
<Trace level="2" type="T">Version : 3</Trace>
<Trace level="2" type="T">Direct : 1</Trace>
<Trace level="2" type="T">SAPREL : 700</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="1" type="T">Convert Segment-Definitions to Types</Trace>
<Trace level="1" type="T">Make Syntax check of actual Idoc</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="2" type="T">IDX_SYNTAX_CHECK</Trace>
<Trace level="2" type="T">Port : SAPPIS</Trace>
<Trace level="2" type="T">IDoctyp : WP_PLU03</Trace>
<Trace level="2" type="T">Cimtyp :</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="2" type="T">Create XML-Control Record</Trace>
<Trace level="2" type="T">Create XML-Data Records</Trace>
<Trace level="3" type="T">Create data Record E1WPA01</Trace>
<Trace level="3" type="T">Create data Record E1WPA02</Trace>
<Trace level="3" type="T">Create data Record E1WPA03</Trace>
<Trace level="3" type="T">Create data Record E1WPA04</Trace>
<Trace level="3" type="T">Create data Record E1WPA05</Trace>
<Trace level="3" type="T">Create data Record E1WPA04</Trace>
<Trace level="3" type="T">Create data Record E1WPA05</Trace>
<Trace level="3" type="T">Create data Record E1WPA04</Trace>
<Trace level="3" type="T">Create data Record E1WPA05</Trace>
<Trace level="3" type="T">Create data Record E1WPA07</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
<Trace level="3" type="T">Create data Record E1WXX01</Trace>
</Trace>
<Trace level="2" type="T">party-scheme: ALE#KU</Trace>
<Trace level="1" type="T">party normalization error: scheme = ALE#KU</Trace>
<Trace level="2" type="T">Set Sender Routing-object</Trace>
<Trace level="1" type="T">Set Receiver Routing-object</Trace>
<Trace level="1" type="T">Exit Function IDX_INBOUND_XMB</Trace>
<Trace level="1" type="T">COMMIT is expected by application !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>
<Trace level="3" type="T">Getting type of XMB...</Trace>
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="2" type="T">XMB kind = CENTRAL</Trace>
<Trace level="3" type="T">Start pipeline found</Trace>
<Trace level="2" type="T">Switch to external start pipeline PID = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
<Trace level="3" type="T">No triggers found. OK.</Trace>
</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="3" type="T">system-ID = PSX</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = 116866</Trace>
<Trace level="1" type="Timestamp">2008-05-05T13:15:27Z INDIA</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 481ADC34F6CF1214E1000000AC10100D</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="3" type="T">QOS = EO</Trace>
<Trace level="3" type="T">Message-GUID = 481ADC34F6CF1214E1000000AC10100D</Trace>
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="3" type="T">Generate prefixed queue name</Trace>
<Trace level="1" type="T">Queue name : XBTI0001</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0001</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="3" type="T">Setup qRFC Scheduler</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="3" type="T">Call qRFC .... MsgGuid = 481ADC34F6CF1214E1000000AC10100D</Trace>
<Trace level="3" type="T">Call qRFC .... Version = 000</Trace>
<Trace level="3" type="T">Call qRFC .... Pipeline = CENTRAL</Trace>
<Trace level="3" type="T">OK.</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="3" type="T">Version number = 000</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 001</Trace>
<Trace level="3" type="T">Message version 000</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface WP_PLU.WP_PLU03*</Trace>
<Trace level="1" type="T">select interface namespace urn:sap-com:document:sap:idoc:messages</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface *</Trace>
<Trace level="1" type="T">select interface namespace</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="3" type="T">message version successfully read from persist version= 000</Trace>
<Trace level="2" type="T">Increment log sequence to 001</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = PSX</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = 116866</Trace>
<Trace level="1" type="Timestamp">2008-05-05T13:16:48Z INDIA</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2008-05-05T13:16:48Z INDIA Begin of pipeline processing PLSRVID = CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
<Trace level="1" type="Timestamp">2008-05-05T13:16:48Z INDIA Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_RD_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Start with given receiver C086 -</Trace>
<Trace level="2" type="T">Classic Receiver Determination via Rules.</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 1</Trace>
<Trace level="2" type="T">...valid Receiver w/o Condition: - BS_Soap_Service_Qty</Trace>
<Trace level="2" type="T">No Receiver found behaviour: 0</Trace>
<Trace level="2" type="T">Number of Receivers:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2008-05-05T13:16:48Z INDIA End of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 001</Trace>
<Trace level="3" type="T">Message version 001</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
<Trace level="1" type="Timestamp">2008-05-05T13:16:48Z INDIA Start of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_ID_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) BS_Soap_Service_Qty MI_POS_Itemmaster_OB</Trace>
<Trace level="2" type="T">...valid InbIf without Condition: MI_POS_Itemmaster_OB</Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2008-05-05T13:16:48Z INDIA End of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 002</Trace>
<Trace level="3" type="T">Message version 002</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
<Trace level="1" type="Timestamp">2008-05-05T13:16:48Z INDIA Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_RECEIVER_SPLIT</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="3" type="T">Case handling for different plsrv_ids PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="2" type="T">got property produced by receiver determination</Trace>
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTO0___0002</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 012</Trace>
<Trace level="3" type="T">Message version 003</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="3" type="T">message version successfully read from persist version= 004</Trace>
<Trace level="2" type="T">Increment log sequence to 005</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = PSX</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = 116866</Trace>
<Trace level="1" type="Timestamp">2008-05-05T13:18:58Z INDIA</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2008-05-05T13:18:58Z INDIA Begin of pipeline processing PLSRVID = CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
<Trace level="1" type="Timestamp">2008-05-05T13:18:58Z INDIA Start of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_MAPPING_XMS_PLSRV3</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="2" type="T">......attachment XI_Context not found</Trace>
<Trace level="3" type="T">Mapping already defined in interface determination</Trace>
<Trace level="3" type="T">Object ID of Interface Mapping C5523ABE7D9A35BDABE2082468D67E41</Trace>
<Trace level="3" type="T">Version ID of Interface Mapping 1FB1D8C0010B11DD9AB1F535AC101018</Trace>
<Trace level="1" type="T">Interface Mapping http://sub-sapretail-pos.com/Itemmaster IM_POS_Itemmaster_OB</Trace>
<Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_MM_POS_Itemmaster_multi_OB_</Trace>
<Trace level="3" type="T">Dynamic Configuration ( http://sap.com/xi/XI/System/IDoc SNDPOR SAPPIS ) ( http://sap.com/xi/XI/System/IDoc SNDPRN PISCLNT900 ) ( http://sap.com/xi/XI/System/IDoc SNDPRT LS ) ( http://sap.com/xi/XI/System/IDoc RCVPOR A000000015 ) ( http://sap.com/xi/XI/System/IDoc RCVPRN C086 ) ( http://sap.com/xi/XI/System/IDoc RCVPRT KU ) ( http://sap.com/xi/XI/System/IDoc MESTYP WP_PLU ) ( http://sap.com/xi/XI/System/IDoc IDOCTYP WP_PLU03 ) ( http://sap.com/xi/XI/System/IDoc CIMTYP )</Trace>
<Trace level="2" type="T">Mode 0</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_POS_Itemmaster_multi_OB_.</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_POS_Itemmaster_multi_OB_</Trace>
<Trace level="2" type="T">Java mapping com/sap/xi/tf/_MM_POS_Itemmaster_multi_OB_ completed. (executeStep() of com.sap.xi.tf._MM_POS_Itemmaster_multi_OB_</Trace>
<Trace level="3" type="T">Dynamic Configuration ( http://sap.com/xi/XI/System/IDoc RCVPOR A000000015 ) ( http://sap.com/xi/XI/System/IDoc SNDPRT LS ) ( http://sap.com/xi/XI/System/IDoc RCVPRN C086 ) ( http://sap.com/xi/XI/System/IDoc SNDPOR SAPPIS ) ( http://sap.com/xi/XI/System/IDoc SNDPRN PISCLNT900 ) ( http://sap.com/xi/XI/System/IDoc CIMTYP ) ( http://sap.com/xi/XI/System/IDoc IDOCTYP WP_PLU03 ) ( http://sap.com/xi/XI/System/IDoc MESTYP WP_PLU ) ( http://sap.com/xi/XI/System/IDoc RCVPRT KU )</Trace>
<Trace level="1" type="T">ContentType application/xml</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2008-05-05T13:18:58Z INDIA End of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 005</Trace>
<Trace level="3" type="T">Message version 005</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
<Trace level="1" type="Timestamp">2008-05-05T13:18:58Z INDIA Start of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_OUTBINDING</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">
<Trace level="2" type="T">O U T B O U N D - B I N D I N G</Trace>
<Trace level="2" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">determine OUTBOUND BINDING for:</Trace>
<Trace level="2" type="T">-Subhiksha_PIS_subprd1</Trace>
<Trace level="2" type="T">-BS_Soap_Service_Qty</Trace>
<Trace level="2" type="T">http://sub-sapretail-pos.com/Itemmaster.MI_POS_Itemmaster_OB</Trace>
<Trace level="2" type="T">Channel found: - BS_Soap_Service_Qty - CC_POS_Itemmaster_OB_Qty</Trace>
<Trace level="2" type="T">no header mapping defined</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2008-05-05T13:18:58Z INDIA End of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 006</Trace>
<Trace level="3" type="T">Message version 006</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="1" type="B" name="PLSRV_CALL_ADAPTER" />
- 
<Trace level="1" type="Timestamp">2008-05-05T13:18:58Z INDIA Start of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS =</Trace>
<Trace level="3" type="T">P_IFNAME =</Trace>
<Trace level="3" type="T">P_METHOD =</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Unknown channel type: SOAP</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = AENGINE</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_IE_ADAPTER</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="3" type="T">Channel for adapter engine: SOAP</Trace>
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
<Trace level="2" type="T">return fresh values from cache</Trace>
<Trace level="2" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
<Trace level="3" type="T">URL = http://psxprd:51000/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="3" type="T">User = PIISUSER</Trace>
<Trace level="3" type="T">Cached = X</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="3" type="T">Security: Basic authentication</Trace>
<Trace level="3" type="T">Serializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="3" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="3" type="T">HTTP-client: status code = 200</Trace>
<Trace level="3" type="T">Deserializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: closing...</Trace>
</Trace>
</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 007</Trace>
<Trace level="3" type="T">Message version 007</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="3" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 014</Trace>
<Trace level="3" type="T">Message version 008</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</SAP:Trace>
Regards
Suman

File to Multiple RFC's to File scenario ....

Hello Friends,
We are implementing a scenario : File-RFC-File without BPM, but our output data is available with 3 BAPI's, If we are going to implement 3 File-RFC-File scenario's so we would be getting 3 output files. How can this be combined in a single file.... As we need to generate a single file.
Pl. can anyone help me with this ......?
Regards,
Jayashri.

Easiest way would be the use of BPM. Without BPM, you can create and append same file but that could not ensure the correctness of data, so not a good solution.
Other way could be using one scenario with two RFC lookups.
Regards,
Prateek

RFC to File scenario.. Messages not available in sxmb_moni

Hi Experts,
I have created simple RFC to File scenario in my sandbox system. First time I am doing this type of scenario.
When I execute the program which is created to call the RFC Function Module nothing is coming into sxmb_moni in sap system as well as in PI system. I don't know why messages is not coming to sxmb_moni.
Please suggest me how to resolve this issue.
Thanks & Regards,
Satish Kumar P.

Hi Satish,
first monitor Sender RFC channel in communciation channel monitroing ,after executing program in ECC if BAPI triggered then definely you will see log in RFC sender channel.
if nothing was found then prob in ECC side like Pogram triggered BAPI.
Regards,
Raj

Payload missing in File-File scenario

Hi,
I have created a scenario which is a combination of File-IDoc and File-File scenario.
First scenario is working fine.IDoc is getting generated and posted to SAP R/3.
I could see messages for these two as child messages in sxmb_moni with same message ID.
But in the second message,payload is missing in Call Adapter block and Response block in sxmb_moni.
Also,output file is not getting generated though the message is successful in sxmb_moni.
Could anyone please let me know what could be the reason for this.
Thanks.
Best Regards,
Shweta

this is the full trace:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>ApplicationMessage</SAP:MessageClass>
<SAP:ProcessingMode>asynchronous</SAP:ProcessingMode>
<SAP:MessageId>47A1A2FD-9F90-0066-E100-80028928A9DC</SAP:MessageId>
<SAP:TimeSent>2008-01-31T10:34:40Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Party agency="http://sap.com/xi/XI" scheme="XIParty">Logitec_Test</SAP:Party>
<SAP:Service>POS_MAIL</SAP:Service>
<SAP:Interface namespace="http://pan.eu/ORDERS/LOGITEC_ORDRS_09">MI_ORDERS_EDIFACT_D96A_AS_OB</SAP:Interface>
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="http://sap.com/xi/XI" scheme="XIParty">Logitec_Test</SAP:Party>
<SAP:Service>BS_FILE_RECEIVER</SAP:Service>
<SAP:Interface namespace="http://pan.eu/ORDERS/LOGITEC_ORDRS_09">MI_ORDERS_EDIFACT_D96A_AS_IB</SAP:Interface>
- <SAP:Mapping notRequired="M">
<SAP:ObjectId>s0jXwORWMKCNyteX7/7ysA==</SAP:ObjectId>
<SAP:SWCV>ftfEkNt0EdqTpexmiSip3w==</SAP:SWCV>
<SAP:SP>-1</SAP:SP>
</SAP:Mapping>
</SAP:Receiver>
<SAP:Interface namespace="http://pan.eu/ORDERS/LOGITEC_ORDRS_09">MI_ORDERS_EDIFACT_D96A_AS_IB</SAP:Interface>
</SAP:Main>
- <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:QualityOfService>ExactlyOnce</SAP:QualityOfService>
</SAP:ReliableMessaging>
- <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
- <SAP:Hop timeStamp="2008-01-31T10:34:40Z" wasRead="false">
<SAP:Engine type="AE">af.pxe.pandpxe</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XIRA</SAP:Adapter>
<SAP:MessageId>2100B8D2-CFE8-11DC-CDAA-001125A5DEBE</SAP:MessageId>
<SAP:Info />
</SAP:Hop>
- <SAP:Hop timeStamp="2008-01-31T10:34:40Z" wasRead="false">
<SAP:Engine type="IS">is.00.pandpxe</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>47A1A2FD-9F90-0066-E100-80028928A9DC</SAP:MessageId>
- <SAP:Branch>
<SAP:MessageId>47A1A2FC-9F90-0066-E100-80028928A9DC</SAP:MessageId>
<SAP:Service>PAECLNT020</SAP:Service>
</SAP:Branch>
- <SAP:Branch>
<SAP:MessageId>47A1A2FD-9F90-0066-E100-80028928A9DC</SAP:MessageId>
<SAP:Party agency="http://sap.com/xi/XI" scheme="XIParty">Logitec_Test</SAP:Party>
<SAP:Service>BS_FILE_RECEIVER</SAP:Service>
</SAP:Branch>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
</SAP:HopList>
- <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Date>20080131</SAP:Date>
<SAP:Time>113441</SAP:Time>
<SAP:Host>pandpxe</SAP:Host>
<SAP:SystemId>PXE</SAP:SystemId>
<SAP:SystemNr>00</SAP:SystemNr>
<SAP:OS>AIX</SAP:OS>
<SAP:DB>ORACLE</SAP:DB>
<SAP:Language />
<SAP:ProcStatus>003</SAP:ProcStatus>
<SAP:AdapterStatus>000</SAP:AdapterStatus>
<SAP:User>XIAFUSER</SAP:User>
<SAP:TraceLevel>3</SAP:TraceLevel>
<SAP:Logging>1</SAP:Logging>
<SAP:LogSeqNbr>004</SAP:LogSeqNbr>
<SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
<SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
<SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
<SAP:PipelineElementId />
<SAP:PipelineStartElementId>5EC3C53B4BB7B62DE10000000A1148F5</SAP:PipelineStartElementId>
<SAP:PipelineService />
<SAP:QIdInternal>XBTOW___0002</SAP:QIdInternal>
<SAP:CommitActor>X</SAP:CommitActor>
<SAP:ParentId ChildNo="0" ChildTotal="0">2100B8D2CFE811DCCDAA001125A5DEBE</SAP:ParentId>
<SAP:SplitNumber>0</SAP:SplitNumber>
<SAP:NumberOfRetries>0</SAP:NumberOfRetries>
<SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
<SAP:TypeOfEngine client="010">CENTRAL</SAP:TypeOfEngine>
<SAP:PlsrvExceptionCode />
<SAP:EOReferenceRuntime type="TID">8928A9DC00C947A1A441092F</SAP:EOReferenceRuntime>
<SAP:EOReferenceInbound type="TID" />
<SAP:EOReferenceOutbound type="TID" />
<SAP:MessageSizePayload>4272</SAP:MessageSizePayload>
<SAP:MessageSizeTotal>8041</SAP:MessageSizeTotal>
<SAP:PayloadSizeRequest>4272</SAP:PayloadSizeRequest>
<SAP:PayloadSizeRequestMap>2874</SAP:PayloadSizeRequestMap>
<SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
<SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
<SAP:Reorganization>INI</SAP:Reorganization>
<SAP:AdapterInbound>AENGINE</SAP:AdapterInbound>
<SAP:AdapterOutbound>AENGINE</SAP:AdapterOutbound>
<SAP:InterfaceAction>DEL</SAP:InterfaceAction>
<SAP:RandomNumber>35</SAP:RandomNumber>
<SAP:AckStatus>000</SAP:AckStatus>
<SAP:SkipReceiverDetermination />
<SAP:Sender_Agreement_GUID>C14103EF96A93EF7A416B17522666D3A</SAP:Sender_Agreement_GUID>
<SAP:Receiver_Agreement_GUID>4E2837E24B083A33A77C5043CBB15379</SAP:Receiver_Agreement_GUID>
<SAP:Serialize_Children>X</SAP:Serialize_Children>
</SAP:RunTime>
- <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="begin" host="pandpxe">20080131103440.920981</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="end" host="pandpxe">20080131103440.934955</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="begin" host="pandpxe">20080131103440.935459</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="pandpxe">20080131103440.945085</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
<SAP:Timestamp type="begin" host="pandpxe">20080131103440.945102</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
<SAP:Timestamp type="end" host="pandpxe">20080131103441.062247</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="pandpxe">20080131103441.064953</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="pandpxe">20080131103441.069988</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="pandpxe">20080131103441.096849</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="pandpxe">20080131103441.102084</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="begin" host="pandpxe">20080131103441.11954</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="end" host="pandpxe">20080131103441.170827</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>
<SAP:Timestamp type="begin" host="pandpxe">20080131103441.170842</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>
<SAP:Timestamp type="end" host="pandpxe">20080131103441.343581</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="begin" host="pandpxe">20080131103441.346447</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="end" host="pandpxe">20080131103441.388572</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
<SAP:Timestamp type="begin" host="pandpxe">20080131103441.414031</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
<SAP:Timestamp type="end" host="pandpxe">20080131103441.418165</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_CALL_ADAPTER</SAP:Name>
<SAP:Timestamp type="begin" host="pandpxe">20080131103441.447064</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_CALL_ADAPTER</SAP:Name>
<SAP:Timestamp type="end" host="pandpxe">20080131103441.589866</SAP:Timestamp>
</SAP:RunTimeItem>
</SAP:PerformanceHeader>
- <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:TraceLevel>Information</SAP:TraceLevel>
<SAP:Logging>Off</SAP:Logging>
</SAP:Diagnostic>
- <SAP:OutboundBinding xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
- <SAP:OutboundBindingEntry version="30">
<SAP:OutboundBindingObjectId>4E2837E24B083A33A77C5043CBB15379</SAP:OutboundBindingObjectId>
<SAP:FromPartyName>Logitec_Test</SAP:FromPartyName>
<SAP:FromServiceName>POS_MAIL</SAP:FromServiceName>
<SAP:ToPartyName>Logitec_Test</SAP:ToPartyName>
<SAP:ToServiceName>BS_FILE_RECEIVER</SAP:ToServiceName>
<SAP:ToInterfaceName>MI_ORDERS_EDIFACT_D96A_AS_IB</SAP:ToInterfaceName>
<SAP:ToInterfaceNamespace>http://pan.eu/ORDERS/LOGITEC_ORDRS_09</SAP:ToInterfaceNamespace>
- <SAP:OutboundBindingAttributes>
<SAP:AdapterTypeData xmlns:SAP="http://sap.com/xi/XI/Message/30" />
</SAP:OutboundBindingAttributes>
- <SAP:HeaderMapping>
<SAP:FieldMapping xmlns:SAP="http://sap.com/xi/XI/Message/30" />
</SAP:HeaderMapping>
- <SAP:ChannelEntry version="30">
<SAP:PartyName xmlns:SAP="http://sap.com/xi/XI/Message/30">Logitec_Test</SAP:PartyName>
<SAP:ServiceName xmlns:SAP="http://sap.com/xi/XI/Message/30">BS_FILE_RECEIVER</SAP:ServiceName>
<SAP:ChannelName xmlns:SAP="http://sap.com/xi/XI/Message/30">CC_FILE_RECEIVER_EDIFACT_ORDERS</SAP:ChannelName>
<SAP:AdapterName xmlns:SAP="http://sap.com/xi/XI/Message/30">File</SAP:AdapterName>
<SAP:AdapterNamespace xmlns:SAP="http://sap.com/xi/XI/Message/30">http://sap.com/xi/XI/System</SAP:AdapterNamespace>
<SAP:AdapterSWCV xmlns:SAP="http://sap.com/xi/XI/Message/30">3B787A8035C111D6BBE0EFE50A1145A5</SAP:AdapterSWCV>
<SAP:AdapterEngineType xmlns:SAP="http://sap.com/xi/XI/Message/30">AE</SAP:AdapterEngineType>
<SAP:AdapterEngineName xmlns:SAP="http://sap.com/xi/XI/Message/30" />
<SAP:MessageProtocol xmlns:SAP="http://sap.com/xi/XI/Message/30">File</SAP:MessageProtocol>
<SAP:MessageProtocolVersion xmlns:SAP="http://sap.com/xi/XI/Message/30">3.0.0527</SAP:MessageProtocolVersion>
<SAP:TransportProtocol xmlns:SAP="http://sap.com/xi/XI/Message/30">FTP</SAP:TransportProtocol>
<SAP:TransportProtocolVersion xmlns:SAP="http://sap.com/xi/XI/Message/30" />
<SAP:ChannelDirection xmlns:SAP="http://sap.com/xi/XI/Message/30">O</SAP:ChannelDirection>
<SAP:FromPartyAgency xmlns:SAP="http://sap.com/xi/XI/Message/30">Seeburger</SAP:FromPartyAgency>
<SAP:FromPartySchema xmlns:SAP="http://sap.com/xi/XI/Message/30">AS2ID</SAP:FromPartySchema>
<SAP:ToPartySchema xmlns:SAP="http://sap.com/xi/XI/Message/30">AS2ID</SAP:ToPartySchema>
<SAP:ToPartyAgency xmlns:SAP="http://sap.com/xi/XI/Message/30">Seeburger</SAP:ToPartyAgency>
- <SAP:ChannelAttributes xmlns:SAP="http://sap.com/xi/XI/Message/30">
<SAP:AdapterTypeData xmlns:SAP="http://sap.com/xi/XI/Message/30" />
</SAP:ChannelAttributes>
</SAP:ChannelEntry>
</SAP:OutboundBindingEntry>
</SAP:OutboundBinding>
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external = Logitec_Test</Trace>
<Trace level="1" type="T">Sender party normalized = Logitec_Test</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="2" type="T">Request Line = POST /sap/xi/engine?type=entry HTTP/1.1</Trace>
<Trace level="2" type="T">Host = pandpxe.pan.eu:8000</Trace>
<Trace level="2" type="T">Server protocol = HTTP/1.1</Trace>
<Trace level="2" type="T">Remote address = 137.40.169.220</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>
<Trace level="3" type="T">Getting type of XMB...</Trace>
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="2" type="T">XMB kind = CENTRAL</Trace>
<Trace level="3" type="T">Start pipeline found</Trace>
<Trace level="2" type="T">Switch to external start pipeline PID = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
<Trace level="3" type="T">No triggers found. OK.</Trace>
</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="3" type="T">system-ID = PXE</Trace>
<Trace level="3" type="T">client = 010</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIAFUSER</Trace>
<Trace level="1" type="Timestamp">2008-01-31T10:34:40Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 2100B8D2CFE811DCCDAA001125A5DEBE</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="3" type="T">QOS = EO</Trace>
<Trace level="3" type="T">Message-GUID = 2100B8D2CFE811DCCDAA001125A5DEBE</Trace>
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="3" type="T">Generate prefixed queue name</Trace>
<Trace level="1" type="T">Queue name : XBTI0008</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0008</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="3" type="T">Setup qRFC Scheduler</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="3" type="T">Call qRFC .... MsgGuid = 2100B8D2CFE811DCCDAA001125A5DEBE</Trace>
<Trace level="3" type="T">Call qRFC .... Version = 000</Trace>
<Trace level="3" type="T">Call qRFC .... Pipeline = CENTRAL</Trace>
<Trace level="3" type="T">OK.</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="3" type="T">Version number = 000</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST">
<Trace level="3" type="T">Persisting message Status = 001</Trace>
<Trace level="3" type="T">Message version 000</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="3" type="T">message version successfully read from persist version= 000</Trace>
<Trace level="2" type="T">Increment log sequence to 001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = PXE</Trace>
<Trace level="3" type="T">client = 010</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIAFUSER</Trace>
<Trace level="1" type="Timestamp">2008-01-31T10:34:41Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC">
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2008-01-31T10:34:41Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
<Trace level="1" type="Timestamp">2008-01-31T10:34:41Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_RD_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Start without given receiver</Trace>
<Trace level="2" type="T">Classic Receiver Determination via Rules.</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 1</Trace>
<Trace level="2" type="T">...valid Receiver w/o Condition: Logitec_Test - BS_FILE_RECEIVER</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 2</Trace>
<Trace level="2" type="T">...valid Receiver w/o Condition: - PAECLNT020</Trace>
<Trace level="2" type="T">No Receiver found behaviour: 0</Trace>
<Trace level="2" type="T">Number of Receivers:2</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2008-01-31T10:34:41Z CET End of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 001</Trace>
<Trace level="3" type="T">Message version 001</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
<Trace level="1" type="Timestamp">2008-01-31T10:34:41Z CET Start of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_ID_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) PAECLNT020 ORDERS.ORDERS05</Trace>
<Trace level="2" type="T">...valid InbIf without Condition: ORDERS.ORDERS05</Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) Logitec_Test BS_FILE_RECEIVER MI_ORDERS_EDIFACT_D96A_AS_IB</Trace>
<Trace level="2" type="T">...valid InbIf without Condition: MI_ORDERS_EDIFACT_D96A_AS_IB</Trace>
<Trace level="2" type="T">Number of receiving Interfaces:2</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2008-01-31T10:34:41Z CET End of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 002</Trace>
<Trace level="3" type="T">Message version 002</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
<Trace level="1" type="Timestamp">2008-01-31T10:34:41Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_RECEIVER_SPLIT</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="3" type="T">Case handling for different plsrv_ids PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="2" type="T">got property produced by receiver determination</Trace>
<Trace level="1" type="T">number of receivers: 2</Trace>
<Trace level="1" type="T">Multi-receiver split case</Trace>
<Trace level="1" type="T">Persisting initial (pre-split) message</Trace>
<Trace level="1" type="T">Persisting split messages (split kids)</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Splitting loop start</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="3" type="T">Split kid MessageGuid: 47A1A2FC9F900066E10080028928A9DC</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTO3___0001</Trace>
<Trace level="1" type="T">Persisting split kid = 47A1A2FC9F900066E10080028928A9DC</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 012</Trace>
<Trace level="3" type="T">Message version 000</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="3" type="T">Split kid MessageGuid: 47A1A2FD9F900066E10080028928A9DC</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTOW___0002</Trace>
<Trace level="1" type="T">Persisting split kid = 47A1A2FD9F900066E10080028928A9DC</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 012</Trace>
<Trace level="3" type="T">Message version 000</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="3" type="T">message version successfully read from persist version= 000</Trace>
<Trace level="2" type="T">Increment log sequence to 001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = PXE</Trace>
<Trace level="3" type="T">client = 010</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIAFUSER</Trace>
<Trace level="1" type="Timestamp">2008-01-31T10:34:41Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2008-01-31T10:34:41Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
<Trace level="1" type="Timestamp">2008-01-31T10:34:41Z CET Start of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_MAPPING_XMS_PLSRV3</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="2" type="T">......attachment XI_Context not found</Trace>
<Trace level="3" type="T">Mapping is already determined in the interface determination</Trace>
<Trace level="3" type="T">Object ID of Interface Mapping B348D7C0E45630A08DCAD797EFFEF2B0</Trace>
<Trace level="3" type="T">Version ID of Interface Mapping 7ED7C490DB7411DA93A5EC668928A9DF</Trace>
<Trace level="1" type="T">Interface Mapping http://pan.eu/ORDERS/LOGITEC_ORDRS_09 IM_ORDERS_EDIFACT_to_ORDERS_EDIFACT</Trace>
<Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_MM_EDIFACT_ORDERS_D96A_to_EDIFACT_ORDERS_D96A_</Trace>
<Trace level="3" type="T">Dynamic configuration is empty</Trace>
<Trace level="2" type="T">Mode 0</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_EDIFACT_ORDERS_D96A_to_EDIFACT_ORDERS_D96A_.</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_EDIFACT_ORDERS_D96A_to_EDIFACT_ORDERS_D96A_</Trace>
<Trace level="2" type="T">Java mapping com/sap/xi/tf/_MM_EDIFACT_ORDERS_D96A_to_EDIFACT_ORDERS_D96A_ completed. (executeStep() of com.sap.xi.tf._MM_EDIFACT_ORDERS_D96A_to_EDIFACT_ORDERS_D96A_</Trace>
<Trace level="3" type="T">Dynamic configuration is empty</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2008-01-31T10:34:41Z CET End of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 001</Trace>
<Trace level="3" type="T">Message version 001</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
<Trace level="1" type="Timestamp">2008-01-31T10:34:41Z CET Start of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_OUTBINDING</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">
<Trace level="2" type="T">O U T B O U N D - B I N D I N G</Trace>
<Trace level="2" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">determine OUTBOUND BINDING for:</Trace>
<Trace level="2" type="T">Logitec_Test-POS_MAIL</Trace>
<Trace level="2" type="T">Logitec_Test-BS_FILE_RECEIVER</Trace>
<Trace level="2" type="T">http://pan.eu/ORDERS/LOGITEC_ORDRS_09.MI_ORDERS_EDIFACT_D96A_AS_IB</Trace>
<Trace level="2" type="T">Channel found: Logitec_Test - BS_FILE_RECEIVER - CC_FILE_RECEIVER_EDIFACT_ORDERS</Trace>
<Trace level="2" type="T">no header mapping defined</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2008-01-31T10:34:41Z CET End of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 002</Trace>
<Trace level="3" type="T">Message version 002</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_CALL_ADAPTER">
<Trace level="1" type="Timestamp">2008-01-31T10:34:41Z CET Start of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS =</Trace>
<Trace level="3" type="T">P_IFNAME =</Trace>
<Trace level="3" type="T">P_METHOD =</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Unknown channel type: File</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = AENGINE</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_IE_ADAPTER</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="3" type="T">Channel for adapter engine: File</Trace>
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
<Trace level="2" type="T">return fresh values from cache</Trace>
<Trace level="2" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET):</Trace>
<Trace level="3" type="T">URL = http://pandpxe:50000/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="3" type="T">User = XIISUSER</Trace>
<Trace level="3" type="T">Cached = X</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="3" type="T">Security: Basic authentication</Trace>
<Trace level="3" type="T">Serializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="3" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="3" type="T">HTTP-client: status code = 200</Trace>
<Trace level="3" type="T">Deserializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: closing...</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2008-01-31T10:34:41Z CET End of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 003</Trace>
<Trace level="3" type="T">Message version 003</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="3" type="T">Async processing: skip mapping of response</Trace>
</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Async processing completed OK.</Trace>
<Trace level="3" type="T">system-ID = PXE</Trace>
<Trace level="3" type="T">client = 010</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIAFUSER</Trace>
<Trace level="1" type="Timestamp">2008-01-31T10:34:41Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 003</Trace>
<Trace level="3" type="T">Message version 004</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</SAP:Trace>
</SOAP:Header>
- <SOAP:Body>
<SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7" />
</SOAP:Body>
</SOAP:Envelope>

Problem Executing RFC to File Scenario

Hi,
I am currently working on RFC to File Scenario which is Asynchronous in Nature i.e. The RFC will send some data to XI and then it'll be dumped in an XML File on the shared drive.
Following are the steps which were performed by me :
1. i created an RFC Destination in R/3 using SM59 and entered the Required values as mentioned in the blog
The specified item was not found.
2. Then i entered the same values in the communication channel of the sender RFC adapter.
I tested it from R/3 and the connection was successful.
3. i created an RFC in SE37 in the R/3 and just added an existing table under the "tables" tab. No further code was written in it. I saved it and activated it.
4. All the IR and ID objects were made and activated and then the scenario was run by sending a single data row by pressing F8. The RFC showed a message of "System Failure" and while looking into the XI Server (SXMB_MONI) the message gave absurd values with a error symbol(it a Red Light symbol and there was no Red Flag).
Initially, the XML file was getting posted in the shared drive but after further execution it stopped.
I am unable to figure out the problem. Kindly let me know where i am going wrong and what needs to be done to correct it ?

Hi,
For Sending RFC asynchronously check for these points:
For RFC creation and importing please follow this discussion. Very useful:
Re: RFC to FILE
Specially reply by Udo Martens.
Also for sender RFC, check two things.
1) First step is Register your ProgramId using activiating the communication channel(XI). You should be able to see it in smgw(R/3)
smgw->Goto->Looged on Clients(Check it here)
2) Then use this registered programid in your RFC Destination,in R/3 (it is Case-Sensitive).
These are just common errors i have encountered sometimes.

Testing of Idoc to file scenario

Hi Gurus,
I have completed the Idoc to file scenario, But how should I test the whole scenario??!!
Because of my functional guy is absent for this week and I do want to test my scenario, whether its working properly or not??!!
Note: As I knew, we19 tcode, it asks some Idoc number and other info to do the same.. could you please help me out?!!
Thanks.,
Stallin

Hi
Just for testing purpose..you can use WE19..
First goto transaction WE02 and put Basic type : MATMAS03 as filter criteria, change your creation date to select little old idocs and run...on next screen your will see number of idocs "MATMAS03" with green status(if there is any in that period..otheriwse change period again).
Then goto WE19 and put existing idoc number in the field existing idoc and and presss F8...On next screen press "Standard outbound processing".
Can also use we19 and change control record ( Double click in EDIDC segment) to your sender / recever partner profile.. and run
Thanks

Unable to do IDoc to File Scenario ; Please help me....

Hi Experts!!!,
I am trying to convert an IDoc to an .Txt or .Xml file, But I am un able to do it. Whenever I m trying to configure the Idoc adapter , it's not allowing me to select as "sender" (default it will be on the recvr side). Please help me in this regard.
Do I need to use RFC adapet, or BAPI instead of IDoc or any other way..to complete IDoc to File scenario...
THANKS IN ADVANCE!!!
Sunil K Shetty.

HI,
No need to use Sender Idoc adapter , default , IDoc adapter resides on Integration Engine. No sender communication channel and sender agreement also
see the below links
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
IDOc testing - /people/suraj.sr/blog/2005/12/29/generate-test-case-for-an-idoc-scenario
Idoc settings https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
Regards
Chilla

BPM error (Rfc to file scenario)

Dear Experts,
I'm doing a RFC-FILE scenario with BPM. I have followed the blog RFC Scenario using BPM --Starter Kit by Arpit Seth.
The file is getting picked up. But in SXMB_MONI i get the following error:
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">SYSTEM_FAILURE_INTERNAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>An internal error has occurred</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
In SXMB_MONI_BPE, there are no workflows for the integration process.
What could be wrong?
Please help.
Thanks,
Merrilly

Hi,
Thsi is the error i'm getting now in the synchronous send step:

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_FileRequest_to_RFCRequest_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_FileRequest_to_RFCRequest_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Is it because that the BAPI is not processing anything?
Thanks,
Merrilly

CRM-XI-File Scenario

Hi all,
I am working on CRM-XI Scenario.
I have no idea about this CRM.
but i have to pick data from CRM to XI.
>>so i request, ...........please give me some guidance....& Blogs....
for this.
>>>I want to use here RFC/Idos...........
please help....
Regards,
Umesh Laxkar

Hi Umesh,
Adding to above information....also find the below blogs.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
https://www.sdn.sap.com/irj/sdn/advancedsearch?querystring=rfc%20adapter%20step%20by%
20step&SearchPluginName=sdn_weblog&SelectedCustomProps=resourcetype(value=sdn_weblog)RFC Web Blogs
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
BAPI - Search -
https://www.sdn.sap.com/irj/sdn/advancedsearch?querystring=bapi%20adapter%20step%20by%20step&searchpluginname=sdn_weblog&selectedcustomprops=resourcetype(value=sdn_weblog)
Thanks and Regards,
Chandu

Issue in Creation of XML file from ABAP data

Hi,
I need to create a XML file, but am not facing some issues in creation of XML file, the in the required format.
The required format is
-<Header1 1st field= u201CValueu201D 2nd field= u201CValueu201D>
   - <Header2 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 10 fields>
          <Header3 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 6 fields/>
          <Header4 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 4 fields/.>
           <Header5 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 6 fields/>
      </Header2>
   </Header1>
Iu2019m using the call transformation to convert ABAP data to XML file.
So please anybody can help how to define XML structure in transaction XSLT_TOOL.
And one more thing, here I need to put the condition to display the Header 3, Header 4, Header 5 values. If there is no record for a particular line item in header 3, 4 & 5, I donu2019t want to display full line items; this is only for Header 3, 4 & 5.
Please help me in this to get it resolved.

Hello,
you can use CALL TRANSFORMATION id, which will create a exact "print" of the ABAP data into the XML.
If you need to change the structure of XML, you can alter your ABAP structure to match the requirements.
Of course you can create your own XSLT but that is not that easy to describe and nobody will do that for you around here. If you would like to start with XSLT, you´d better start the search.
Regards Otto

I want to use my Time Capsule as a central 'hub/hard-drive' in order to keep all my working files in one place. I then plan to use my laptops/desktops as peripheral devices for editing and creation of these files. Is it possible? Create a personal cloud?

I want to use my Time Capsule as a central 'hub/hard-drive' in order to keep all my working files in one place. I then plan to use my laptops/desktops as peripheral devices for editing and creation of these files. Is it possible? To create a personal cloud?
Can someone advise as to whether i can do the following:
                            Future Internet connection -------------------TIME CAPSULE (containing all files) -------------- Backed up on the WD 2T Hard-drive I have
                                  (not connected yet)                                         I                                                          (*connected to timecapsule physically)
                                                                                                        I
                I                                         I                                                I                                                              I                                                I
      Macbook Pro                             iMac                                       HP (PC)                                             OLD Macbook Pro                         iPhone
(used for remote working)       (Used for home working)     (used for heavy CAD and rendering)    (not being used for anything at the moment)        (& iPods)
I am looking to have all my files in one place as i am hopelessly disorganised. I know the online clouds are a good solution (used Dropbox at work and uni for 3 years) however i am wanting to create my own 'dropbox/icloud' at home. So whenever i get back home with my laptop, any work i have been working on whilst out that day is updated to the timecapsule, and then ultimately as i turn on the other devices, they update to those newer versions of the files. Please tell me that the 3TB time capsule i have can do this, otherwise it feels rather overpriced as a wireless storage device?
Another note (to those in the know) If i am to be working on large files (REVIT/SOLIDWORKS/KEYSHOT/CREO/AUTOCAD) - is the timecapsule connection good enough to support editing and updating these files?
I know i may be asking a question that many have before, but as a bit of a technical novice I wanted a clear-cut answer to my specific circumstances. Your help is greatly appreciated.
(*can i use this WD hard-drive that is connected to the Time Capsule as a back up? so that the time machine back-ups/any back ups are also backed up onto this one? can the WD be a backup for the TC?)
Kind Regards
Joe

The diagram was supposed to look more like this......
Internet ---------TIME CAPSULE(containing all files) --------WD 2T Harddrive
                                            I
     I                           I                          I                            I                                   I
Macbook Pro         iMac                 HP (PC)            OLD Macbook Pro           iPhone
Sorry!
Regards
Joe

Idoc-xi-file scenario. how to display file in html format

I am not sure whether this is a valid question.........but want to confirm as it was asked by somebody
In idoc-xi-file scenario....... how to display file in html format ??
Thanks in advance
Kumar

Hi Vijayakumar,
Thanks for your reply !! You mean to say I got to use XSLT mapping and also .htm and .html extension together to produce the html file ?? or it is sufficient to use any one of them to produce the html file ??
Regards
Kumar

IDOC-XI-FILE Scenario: Error in ABAP Mapping

Dear All,
I am working on IDOC-XI-Flat FIle scenario in which I am using ABAP Mapping as per document "How To Convert an IDoc-XML
structure to a flat file and vice versa in XI 3.0".
I created one customized Idoc for this. The Idoc is reacing XI but its flat file is not getting created. Its giving me following error:
<SAP:Stack>Error in mapping program Z_ABAP_MAPPING_PACKING_LIST (type SAP-ABAP, kernel error ID UNCAUGHT_EXCEPTION) An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally, nor declared in a RAISING clause Dereferencing of the NULL reference.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
I have also gone thru threads posted for the same topic earlier but still I am not been to resolve this error.
Please help me out in resolving this error.
Regards,
N.Jain

HI,
   Log saying that, u have problem in the mapping program.
i.e Z_ABAP_MAPPING_PACKING_LIST
   the problem is due declaration of data.
   i hope that, you have some methods.
   those are declared under intialization section in mapping program.
please use start of selection before the method.
other wise, it will come under intilization section.
warm regards
mahesh.

Creation of catalogue file.BAPI to FILE scenario.

Similar Messages

Maybe you are looking for