Creation of Classification View in Material Master
Hi,
I need to create Classification View for a Material. The user would provide the data in the file, example
Material Number MATNR
Class type TCLA-KLART
Class Type description TCLAT-ARTXT
Class Group TCLG-KLAGR
Class Group Description TCLGT-KTEXT
Class M_CLASB-CLASS
Class Description M_CLASB-CSCHG
Status RMCLF-STATU
Std class RMCLF-STDCL
Characteristics Group TCMG-ATKLA
Characteristics Group Description TCMGT-ATKLT
Characteristics RCTAV-ATNAM
Characteristics Description CABNT-ATBEZ
I read in the posts there is BAPI_OBJCL_CREATE. But I am not able to Map the above fields to pass to this BAPI.
Can someone please suggest me how to do this..
Thanks and Regards,
Vanessa
Hi,
Thanks for the suggestion. But i want to do this through a program. There is a selection screen with 6 radio buttons based o view to be created and an input field for the filename.
Could you provide me any BAPI to do the same.
Thanks and Regards,
Vanessa
Similar Messages
-
Purpose of maintaining classification view in material master
Hi gurus
can anyone explain Purpose of maintaining classification view in material master with example
Regards
Vishal...Hi
One of the reason we maintain classification is for batch management where characteristics like shelf life expiry date is being attached to a class & that class is maintained in material master so whenever transactions takes place it will read from the characteristics value.
the other purpose is with variant configruation, for a configurable material there will be more than one characteristics for ex: in a car it comes with A/C - non a/c, metallic - non metallic, normal steering - power steering all these are mainatained as characteristics & assigned to a class & we use that class in classification for materials.
there is many more advantages & ways of using classification in material master.
Regards
Rang -
PO creation without Purchasing view in material master
Hi
i am using 4.6 version
system is allowing to create PO without purchasing view in material master.
how it would be possible ?
Regards
RahulHi,
i have checked with MARA for that material PSTAT value it is showing there "KDALBPCGV"
please suggest
regards
rahul -
Extend Classification View for Material Master
Hello, How do I extend classificiation view for Material Master? Is there any BAPI or FM to do that?
I cant find any place to extend it with BAPI_MATERIAL_SAVEDATAHi,
Use this FM to create Classfiaction view BAPI_OBJCL_CREATE
Regards,
Shan -
Merging Basic data View and Classification View in Material Master
Hi,
There is a requirement to append Classification View under Basic Data View and then finally to delete Classification View.
As per my understanding, it is not possible. Please let me know if it is possible, if so, please let me know how is it possible.
A quick response is appreciated.
Thanks & Regards
Bhaskar BaddelaHi,
Refer the thread: Problem creating Material Master sales view with LSMW which discuss the same issue. You may check and revert back.
Regards,
AKPT -
No Material classification view in material master.
Hello all,
I have created LSMW for material master upload . Material is getting created through this, but 'classification view' is not getting created.
But i can see the material- class assignment in CL20N.
This problem is for specific material group.
Is there any relation between material group & classification view?
Plz advice how to resolve this?.
Regards,
Satpal MujawarHi,
I found more information:
Batch Input for CL20N is no longer supported.
But you can continue to use batch input with the old transaction cl20.
Please have a look at note 943559, point 2. It would be even better to
use BAPI's instead. Please consult the notes 213120 and 373824 about the
possibilities you've got.
You can find information about the relevant Bapi's in transaction BAPI via:
- Cross-Application Components
- Classification
- ObjectClassification
Best Regards,
Arminda Jack -
Report: Classification view of material master
Hi,
We have activated Batch management for materials.
But for certain material codes, users have not maintained the Classification view.
Is there any report by which we can knowu2019 whether classification view for the material have been maintained or not?Hi,
Check with MM50 with Maintenance status as C
Regards,
Biju K -
Data for Classification View in Material Master
Dear all,
Can someone tell where the data for classification view is stored ??
We are running a BDC and need to check whether classification view is maintained or not ??
Thanks in Advance
Regards,
Vivek KHi,
Check the table MARA, there is a Field VPSTA. in this field the Material views will be stores with single charecters. so check for the Clasification view charecter
also it's PSTAT in MARA and MARC.
Work scheduling A
Accounting B
<b>Classification C</b>
MRP D
Purchasing E
Production resources/tools F
Costing G
Basic data K
Storage L
Forecasting P
Quality management Q
Warehouse management S
Sales V
Plant stocks X
Storage location stocks Z
Regards
Sudheer
Message was edited by:
Sudheer Junnuthula -
Classification view in Material Master
Can any one tell me , how to create a Classification view using program or function module.
I just wanted to create a Classification views in MM01 transaction . is there any function module there to create the same ?
if BAPI_OBJCL_CREATE is the FM , then pls tell me how the following input parameters related to the material . from which table i can have the following parameter values based on material number .
OBJECTKEY_IMP
OBJECTTABLE_IMP
CLASSTYPE_IMP
READ_VALUATIONS
Edited by: Prakash N on Jan 15, 2008 1:27 AMDear All ,
Thanks for your reply , I have passed the following value ,
OBJECTKEYNEW - 000000000000000925
OBJECTTABLENEW - MARA
CLASSNUMNEW - HLLBATCHCLASS
CLASSTYPENEW - 023
STATUS - 1
STANDARDCLASS
CHANGENUMBER
KEYDATE - 18.01.2008
NO_DEFAULT_VALUES
also im passing the characteristics
Export table giving the following result. But when i see the MM02 again i could not see these entries... y ?
RETURN
Result:
T ID NUM MESSAGE
E CL 731 Assignment exists and is valid -
Add new code in classification view under material master
Hi Experts!
I need to add new code in classification view, MM03 for class ZZLOCAL. Can anyone guide me to the path?
Please help..
Thanks.this is not customizing, this is standard master data maintenance.
Easiest way to find the menu path is by entering search_sap_menu into the command field.
then you are prompted for search text. here you can either enter a transaction code or a name of transaction.
SAP will give a list with all menues and paths to reach this transaction -
How to maintain translation of views in material master
Hi,
How we can maintain translation of views in material master
E.g.
Basic Data
Classification
Purchasing
MRP1
MRP2
Ect…
We want to maintain translations in different languages.
Thanks
SudhirDear Sudhir,
Check this link may be help you.
https://help.sap.com/saphelp_nw70/helpdata/en/ad/06dcf1c4be11d291c70000e8a5f6e6/content.htm
Regards,
PK. -
Adding fields in costing view of material master
Hi gurus,
I need to add 4 fields in costing view of material master. I have followed the steps in SPRO, for configuring customized screen in material master.
1) Created a function group YMMCO and copied the screen 2904 from program SAPLMGD1.
2) Added 4 fields in my customized screen.
3) Created copy of 01 ( Screen reference ) to z1 in OMT3B.
Since 2904 is not there in the sequence . I changed one 0001 sequence at the end to 2904 . I also assigned my program
SAPLYMMCO to it. I can see the changed fields in data screen and subscreen.
4) Then I assigned the SSq to z1 in transaction OMT3E.
But unfortunately, when I go to MM01 to create a material , I am not able to view the fields I added in costing view.
I have checked the screen for the previous field, it shows 2904 only.
Two days back, I did the same thing in basic data view 1 , it was working properly. As per client's suggestion I put it in
costing view, it is not working . Please give me suitable suggestions.
Thanks in advance.
D. MallickHi,
I also need to add custom fields to Basic data view. After copying & changing the screen sequence in Config, I could able to see the custom fields in Basic Data view.
I have appended structure with custom fields to MARA table.
But the values I enter in the screen is not getting updated to the table MARA.
Can you please let me know the code, I should have have in PAI (Process After Input) module in the Sub Screen to update the values?
Thanks,
Dasa -
Current period in Accounting 1 view of Material Master
Dear Experts,
In Accounting 1 view of Material Master there is a current period, now it is 12 2009.
Is it possible to make it 11 2009, if yes how to do it.
Please help if you have solution. it is very crucial for me.
Thank you for your support.
Regards,
ZusenHi,
Please read the Solution part of note 487381. There is still a few things need to be carry out before you can proceed
with the initialization :
Bear in mind that the initialization of a posting period has the
following effects concerning the period stocks:
o The initialization of the posting period to a previous or to any
posting period may lead to the loss of the information of the
inventory balances of the previous periods.The book value of the
current posting period is taken as the basis also for values of
the previous period in this case.
If you want to continue working with this new posting period, in
addition you should execute report Z_DEL_HIST_ENTRIES attached so
that history entries greater or equal to the new posting period
will be deleted.
o If you have to briefly reset the posting period by one period
(for example, postings must still be posted in a certain period)
just to make a correction (and for a small number of postings),
you should initialize the posting period back again to the old
value so that the values of the previous period will not be lost
(you should forbid postings when carrying out corrections).
However, afterwards the values of the previous period or the
history records (as of Release 4.5) of the materials posted in
this case are inaccurate.
You should NOT execute report Z_DEL_HIST_ENTRIES in this case.
o However, if the posting period is generally reset again to a
previous posting period and if postings were made during this
time, all information on the inventory balance of the previous
periods is lost.
As of Release 4.5a, you should use the cited correction report
Z_DEL_HIST_ENTRIES in order to delete history records that are
more current than the current posting period.Otherwise, it can
result in deviations (inconsistencies) for the update of the
history records.
o Important! If there are open physical inventory documents that
have status 'counted' or for which indicator 'Freeze inventory
balance' has been set, you should reject these if they refer to a
previous period or have been created in the former previous
period.The inventory difference to be posted can be determined
from the current book value of the previous period and the book
quantity frozen in the physical inventory document (ISEG-BUCHM)
and does not match the inventory balance of the previous period
that is currently valid. -
Problem with *serial no. profile* in work sheduling view of material master
Hi ! !
I am here with a problem with serial no. profile in work sheduling view of material master.
By mistake for some FHMI type ( PRODUCTION RESOURCE TOOLS )materials, serial no profile exist in 'work sheduling' view. Due to that we are facing problem in GRN.
when I am trying to remove that with MM02. i m getting a message as Serial numbers already assigned to this material
Please suggest how to remove serial no. profile.
Thanks in advance,
PrabHi,
go to MMBE and check the Current Serial number...for FHMI type
and go to IQ02 and close the Serial number range at the Current number range...
Now you can assign this serial number range to another material type...
Thx
Raju -
Classification View in customer master using lsmw
Hi folks,
I have a requirement regarding conversion method that is fields regarding classification view in customer master needed to be populated r created in through xd01 transaction this should be done using lsmw tool,if tried with standard method and bapi method ,can any one tell how to do whether it is bapi r standard method plz dont suggest recording method,even it is idoc method k r can any tell me which function module exists fr this ,POINTS will be awrded for answers .Try FM : SD_CUSTOMER_MAINTAIN_ALL
Thanks
Seshu
Maybe you are looking for
-
Issue running Ghostscript on w2k8 x64 Hyperion11.1.2 environment
Hello All, I have installed Hyperion 11.1.2 on windows 2008 64 bit. I have installed everything but my PDF generation does not work for reports in workspace. It just hangs. I have installed AFPL Ghostscript 8.51 x32 with no success. I have also insta
-
i bought an ipod touch and i got itunes downloaded on my computer but can't get it to connect to ipod because it is locked it was locked when i bought it how can i get it unlocked?
-
CRM 2013 SP1 new case functions crashes
Hi, We have an issue with a CRM 2013SP1 that has been upgraded from CRM 2011. After the SP1-upgrade the sitemap was in a bit of a mess so I reset the sitemap with XrmToolbox sitemapedito to a CRM 2013-vanilla state and then added the service manageme
-
Error - "No Response From Server" when publishing.
Upload hangs up at random points. Seems to be whith larger files. website www.tcs-pub-and-grub.com
-
My hard drive crashed for my imac. It had all of our family photos for the past 3 years. We did save the photos on an ipod. Apple now says that we are not allowed to move the photos from the ipod to the new hard drive. We placed the photo folder on t