Creation of communication IDOC's from BD12
Hi All,
I am triggering BD12 transaction for few customers.
For some set of customers i am able to create both Master IDOC & Communication IDOC.
Ex: For the customers whose Account Group is : 0001
For other set of customers i am able to create Master IDOC but Communication IDOC i am not able to create.
Ex: For the customers whose Account Group is: ZCRD
Customer in account group ZCRD do not have sales area data maintained, where in there is no information maintained for sales, billing, shipping & Partner functions.
Where as customers in account group 0001 have the sales area data maintained.
This is the functional analysis of both the Account Groups.
Can anybody tell the reason why Communication IDOC's are not created for Account Group-ZCRD customers & For Account Group-0001 communication IDOC's are created!
Can anybody solve this issue!
I have debugged this issue step-by-step for both Account Group's [ZCRD, 0001] related customers, There is no check in code for Account Group-ZCRD so that communication IDOC's does not get created.
Also both Account Group's customers went through same piece of code, Only at in F.M call to MASTERIDOC_CREATE_REQ_DEBMAS
the returned parameter CREATED_COMM_IDOCS is 0 for Account group-ZCRD related customer where as it is 1 for ACcount Group-0001 related customer.
Can anybody resolve this issue so that Communication IDOC's will also be created for Account Group-ZCRD related customers!
Thanks in advance.
Thanks,
Deep.
Hi Naveen,
Thank you for the reply.
In BD64 i have checked the details.
There is no checks/filteration against Account Groups-ZCRD/0001.
One more thing is the customers for Account Group-ZCRD are
Credit Master accounts.
Is there any way i can find the resolution for the same!
Thanks for the reply.
Thanks,
Deep.
Similar Messages
-
Regarding generating Master/Communication IDOCS's from BD12 forfewcustomers
Hi All,
I have one issue when i am using BD12.
I am inputting some customers and output type/message type and executing the transaction for some customers it is generating both Master & Communication IDOCs, But for some customers it is generating only Master IDOC's but not Communication IDOC's.
These kind of cases are coming for particular Account Group [Ex: ZCRD etc..],
Can anybody tell me what is the relation between Account Grooup & Customer & why it is stopping generation of Communication IDOC's for particular Account group related customers.
How can i solve this issue!
Can anybody solve this issue!
Thanks in advance.
Thanks,
Deep.Hi All,
Any inputs/Solution for the above posted issue!
Resolution in this regard will be appreciated.
Thanks,
Deep. -
Outbound delivery creation with inbound IDOC transfer from Java system
Dear Experts,
The scenario we are having is really very interesting. Hopefully its a good learning for me and also for others also.
The scenario is,
After sales order creation the details will be sent to one Non SAP system (Java) for performing some tasks related to forwarding agent decision, shipping date and etc. Once the details are finalized in that Java system then, the details needs to be transferred to SAP as "Inbound IDOC" process. For this proposed to use the SAP Jco middle ware.
Once the details transfered from Java system to SAP then, the outbound IDOC needs to get generated automatically. Assuming the stock for that sales order line item is available. Also one more complexity is, our client is using custom transaction (ZVl10C) for delivery creation.
Now Query is,
1. Which IDOC, message type and Functional module needs to be used for creating the delivery automatically..??
2. As per assumption, stock of that sales order line item should be available. Due to some business reason the stock was removed during inbound IDOC transfer then, what will happen to the IDOC..?. How to avoid this situation..??
3. As we told we are re going to use SAP Jco b/w SAP & Java system. In this case, how the data will get transfered from Java system to SAP..?
Thanks in advance for the replies I am going to get
Regards,
VELDidn't get any feedback from experts for long time. So we are closing the question
-
Communication IDoc is not generating after master IDoc for "DEBMAS"
Hi gurus,
i have done all steps from the beginning to the end for an Idoc transfer of type "DEBMAS".I have created the settings in BD61,BD50 and BD52.And also i can work with other master message types like ARTMAS.I didn't give any filter groups in BD64 for the message type "DEBMAS".When ever i execute BD21(RBDMIDOC) only master idoc is generating,there is no communication idocs for the message type "DEBMAS".Please help someone in this issue.
My special question / doubt is, when ever a master idoc creating ,is it must to create a communication idoc ,if there is no filter in "DEBMAS"?
Please clear someone and explain my doubt.
your help will be highly appreciative...
rgds
tom
Moderator message: Please don't use all upper case in subject line
Edited by: Thomas Zloch on Feb 28, 2010 5:25 PMhi,
communication IDoc is missing when ...
- Distribution Modell is missing
- Filter in Distribution Model is existing an no IDoc is generated (Filter at KNA1M segment only)
try the following.
Goto BD12. Choose your partner and the receiving System and send an IDoc.
Is the Comm. IDoc generated ?
if yes ... there is something with your ChangePointer Logik (BD52, .... look at Table BDCP/V)
if no ... you should take a deeper look at BD64 distribution model.
Maybe the receiver partner or filter is not correct.
good luck,
Gordon
Edited by: Gordon Breuer on Feb 25, 2010 1:12 PM -
Difference b/w Master & Communication IDocs
Hi All,
What is the difference b/w Master & Communication IDocs.
Akshitha.The master Idoc is the Temporary Idoc & kept in memory buffers until communication IDocs are generated. These recipient-specific IDocs are called Communication IDocs and are Stored in the Database.
But the master Idoc is not.
The Communication IDocs are transferable IDocs not the Master Idoc. For every Receiver, each separate communication Idocs will be created from master Idoc.
more info on idocs....
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
Try this..Hope this will help.
SAP ALE & IDOC<<<<
Steps to configuration(Basis) >>
1. Create Logical System (LS) for each applicable ALE-enabled client
2. Link client to Logical System on the respective servers
3. Create background user, to be used by ALE(with authorizaton for ALE postings)
4. Create RFC Destinations(SM59)
5. Ports in Idoc processing(WE21)
6. Generate partner profiles for sending system
The functional configuration(Tcode: SALE)
Create a Customer Distribution Model (CDM);
Add appropriate message types and filters to the CDM;
Generate outbound partner profiles;
Distribute the CDM to the receiving systems; and
Generate inbound partner profiles on each of the clients.
Steps to customize a new IDoc >>>
1. Define IDoc Segment (WE31)
2. Convert Segments into an IDoc type (WE30)
3. Create a Message Type (WE81)
4. Create valid Combination of Message & IDoc type(WE82)
5. Define Processing Code(WE41 for OUT / WE42 for IN)
6. Define Partner Profile(WE20)
Important Transaction Codes:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 - Generate Partner Profiles
BD61 - Activate Change Pointers - Globally
BD50 - Activate Change Pointer for Msg Type
BD52 - Activate change pointer per change.doc object
BD59 - Allocation object type -> IDOC type
BD56 - Maintain IDOC Segment Filters
BD53 - Reduction of Message Types
BD21 - Select Change Pointer
BD87 - Status Monitor for ALE Messages
BDM5 - Consistency check (Transaction scenarios)
BD62 - Define rules
BD79 - Maintain rules
BD55 - Defining settings for IDoc conversion
WEDI - ALE IDoc Administration
WE21 - Ports in Idoc processing
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
RSEOUT00 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
Check these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
Please check this PDF documents for ALE and IDoc.
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
Regards
vasu -
Problem in communication IDOCS
Hi all,
I am facing a problm in setting up of communication IDOC while sending a material from 1 system to the other . I checked all the configuration settings in setting the RFC, creating ports , and distribution model and so on....
After creating a partner profile and distribute the model i am checking in bd10
it is giving me the status as 1 master idoc has been created and 0 communication idocs has been generated .
Can any one of please suggest me where I am going wrong ?
points rewardedHi,
check the below settings for distributing material master data..check if u have done all these steps..
For distributing master data like material master, vendor master, customer master we have standard transaction codes that are provided by sap.
Bd10(send material master)
Bd12(send customer master)
Bd14(send vendor master)
Bd30(boms)
The order of Tcodes are:
Bd54 (creating logical systems)
Scc4 (assigning logical systems )
Sm59 (rfc destination)
We81 ( message type)
We30 ( idoc type)
We31 ( segment type)
We82 (linking message type and idoc type)
We21 (creating port)
We20 (partner profiles)
Bd64 (Distribution model)
Bd10 (material master)
Ex: material master.
Message type: matmas.
Idoc type: matmas05.
Regards,
Nagaraj -
What is memory idoc , communication idoc
plz tell me about
memory idoc , communication idoc.hi kalyan,
Master IDOC : This idoc collects all the required data into
single IDOC and this is temporarily stored in memory.
Communication IDOC: there can be n number of communication
IDOCs generated. This comes into picture after the Master
IDOC is validated from the distribution model . And this
IDOC is stored in database table . you can see this IDOC
from we02 tcode..comm idoc is the physical idoc which is reciever specific
IDOC Programming
There are two processes in IDOC processing one is INBOUND PROCESS( IDOC coming to the system and its handling at various stages) and the other is OUTBOUND PROCESS( IDOC is send to other system . Separate ABAP programs are written for these 2 processes and different configuration settings are required for each one .Depending upon the trigeering mechanism different programming approaches are used.OUTBOUND PROGRAMS handle the IDOC creation and INBOUND PROGRAMS handle the inbound IDOC and the data trasfer from the IDOC to the database tables.
NEED FOR ABAP PROGRAMMING arises if
1)New IDOC was created
Depending upon the triggering mechanism i.e change pointer,message control
etc the programming technique changes and the type of process.
2)Existing IDOC was extended
User Exits are used to populate data in new segments added and to read them
back.
3)To enhance an exsiting process.
User Exits are used .
Basic structure of an OUTBOUND PROGRAM
The basic structure of all outbound programs is same. The CONTROL
record which is of TYPE EDIDC has to be filled. It contains important fields like
IDOCTP IDOC type
MESTYP Message Type
RCVPRN Recieving Partner (Destination)
RCVPRT Partner Type (it is LS i.e Logical System)
The DATA RECORD internal table which is of TYPE EDIDD has to be filled
in the same order as there are segments in the IDOC definition.
It has 2 important fields which are to be filled ,these are
SEGNAM Name of the segment
SEGDATA Data in the segment and can be upto 1000 bytes.This field
is corresponds to each data segment in the IDOC.
e.g.
DATA INT_EDIDD LIKE EDIDD OCCURS 0 WITH HEADER LINE.
DATA W_SEGDATA LIKE zsegment "custom segment zsegment
INT_EDIDD-SEGNAM = 'ZSEGMENT'
W_SEGDATA-field1 = value "taken from some table
W_SEGDATA-field2 = value "taken from some table
INT_EDIDD-SEGDATA = W_SEGDATA
APPEND INT_EDIDD
This will fill the data record corresponding to the segment ZSEGMENT . For all
segments the sam steps will be repeated until all the data corresponding to all the
segments in the idoc is filled in the internal table of type EDIDD.
There is only one control record and can be multile data records in the idoc
structure.
Which data is to be extracted from the tables to be filled in EDIDD type internal table is determined in standalone programs from the objects which are specified in the selection screen and from the object key passed to the function module in case of message control and is taken from BDCP table in case of change pointers using function modules "CHANGE_POINTERS_READ"
In case of stand alone programs and function modules based on change pointers method the function module "MASTER_IDOC_DISTRIBUTE" is used to send the IDOC to ALE layer for distribution ,in case of message control it is handled automatically by the RSNASTED program invoked by the message control.
OUTBOUND PROCESS AND OUTBOUND PROGRAM
Outbound programs are used in outbound process to genearte IDOCs . There
purpose is to extract the data from the tables and to fill the IDOC data records
and the control record in the IDOC and pass ito the ALE layer for distribution to the recieving system .
Depending upon the triggering mechanism (how and when the outbound program will be started different techniques and interface is used for outbound program.
1)Message control
Application like PO(purchase order) creation use this technique , where the output type is linked to the application(Message control is a configurable cross application component which can be set in IMG .Such programs are created in the form of function modules and linked to the output type which is linked to the apllication.These have predefined interfaces.
In outbound programs(function module) that use message control the key of the
application document is passed to the function module whcig will read the data from the table depending upon the key passed(NAST structure) and fill the IDOC segemnts with the application data.The control record is also passed to the function module but is not fully filled, the rmaining fields are filled and the control is passed back to the calling program which is RSNASTED and is invoked by the
message control to process ALE and EDI output types and this program on recieving the IDOC data will create the physical IDOC in the system.
The parameteers passed to the function module are
IMPORTING PARAMETERS
OBJECT LIKE NAST
It contains documents key.
CONTROL_RECORD_IN LIKE EDIDC
It contains the partailly filled control record
EXPORETING PARAMETER
OBJECT_TYPE
CONTROL_RECORD_OUT LIKE EDIDC
TABLES
INT_EDID LIKE EDIDD
The internal table used to fill the data records in the same order as they exists in
the IDOC.
The important parameters that should be filled in the custom function module are
CONTROL_RECORD_OUT and INT_EDIDD .The OBJK field of the structue NAST contains the key of the apllication document.
2)Stand alone programs
Generally used for Master Data transfer and as such depending upon the requirement can have different interfaces.The programs have a selection screen which has select options to select the objects, and parameters for specifying the recipient Logical System and the Message Type.
Data is selected based on the specified objects from the tables . and control record of type EDIDC is created and filled with important values like DIRECTION ,IDOCTP,RCVPRT,RCVPRN and MESTYP .
Data is filled in an internal table of TYPE EDIDD according to segment definitions
and in same order and the function module MASTER_IDOC_DISTRIBUTE is called passing the control record and the internal table containg IDOC data and importing an internal table consisting of control records for each communication IDOCS created.
3)Change pointer
Change Pointer table is read and checked if changes were made to important fields , if so the outbound program will be triggered automatically , these have predefined interfaces
thanks
abdul
reward me if usefull -
Error in creation of PurOrd IDoc
Hi All,
I have set up the output type for PO and created patner profiles and also add the message types ORDER and ORDCHG but when I save the PO and check the messages, I get an error: " No recipient found for message type ORDERS in the ALE Model ".
What could be the possible problem?
Highly appreciate any kind of help.
Thanks in advance,
Shweta
PS: <b><REMOVED BY MODERATOR></b>
Message was edited by:
Alvaro Tejada GalindoHi
Check the Partner Profile in WE20 correctly
also see the steps for it as per the doc
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
Try this..Hope this will help.
>>>> SAP ALE & IDOC<<<<
Steps to configuration(Basis) >>
1. Create Logical System (LS) for each applicable ALE-enabled client
2. Link client to Logical System on the respective servers
3. Create background user, to be used by ALE(with authorizaton for ALE postings)
4. Create RFC Destinations(SM59)
5. Ports in Idoc processing(WE21)
6. Generate partner profiles for sending system
The functional configuration(Tcode: SALE)
Create a Customer Distribution Model (CDM);
Add appropriate message types and filters to the CDM;
Generate outbound partner profiles;
Distribute the CDM to the receiving systems; and
Generate inbound partner profiles on each of the clients.
Steps to customize a new IDoc >>>
1. Define IDoc Segment (WE31)
2. Convert Segments into an IDoc type (WE30)
3. Create a Message Type (WE81)
4. Create valid Combination of Message & IDoc type(WE82)
5. Define Processing Code(WE41 for OUT / WE42 for IN)
6. Define Partner Profile(WE20)
Important Transaction Codes:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 - Generate Partner Profiles
BD61 - Activate Change Pointers - Globally
BD50 - Activate Change Pointer for Msg Type
BD52 - Activate change pointer per change.doc object
BD59 - Allocation object type -> IDOC type
BD56 - Maintain IDOC Segment Filters
BD53 - Reduction of Message Types
BD21 - Select Change Pointer
BD87 - Status Monitor for ALE Messages
BDM5 - Consistency check (Transaction scenarios)
BD62 - Define rules
BD79 - Maintain rules
BD55 - Defining settings for IDoc conversion
WEDI - ALE IDoc Administration
WE21 - Ports in Idoc processing
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
RSEOUT00 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
Regards
Anji -
No cubes are reflecting in XIP ,after creation of manual IDOC
Hi Experts,
I am got a mail from client saying that "No cubes are reflecting in XIP ,after creation of manual IDOC"..
Please tell me weather this is issue is related to XI or not if it so, Can you please anybody tell me how to look into this type of issue...
Please help me..
Many thanks in advance..
Regards
RajHi ,
Thank you Sourabh, so I need to get the IDOC basic type from customer and need to check the IDOC using IDX5. Please correct me if I am wrong..
With Warm Regards
Raj -
Problem in the formation of communication idoc
Transfering master data from our system to the client system.
After doin all the outbound configurations from BD10 im sending the materials.
ALL the master idoc are created but only 0 communication idoc is created. how can i solve the problem.Hi,
Since you are transferring the data through ALE, you need to make settings in BD64 (distribution model) and also WE20 paretner profile.
How to maintain:
BD64:
Go to Edit mode and click on button 'Create model view' and fill the popup inputs 'Short text, Technical name, start date and enddate'.
Now click on button 'Add message type' and give 'Model view, Sendor, Receiver and message type'.
These should be same as that of WE20.
Save it and then try once again. now issue will be resolved.
Please reward if useful.
Regards,
Ramesh -
Hi
I have an error. In QAS, I have an Idoc to File scenario. I triggered an idoc from WE19 by adding data manually and it reached XI. I went to BD10 and then tried to trigger from there. I got an error like this
1 Master Idoc set up for message type
0 communication IDoc(s) generated for message type
Any clue why I get this error ?
MidhunSandeep
I created a Model View. Now, I don't see nodes under that as I see under other scenarios. I only see the Model View that I created ECC_XI_File. How do I get nodes? I just have one line there. I saved it. Should I add more details ?
I have only entered the four fields
Where do I enter the Logical System Names of both Source and Target ?
Midhun -
Dear XI experts,
I have setup a distribution model with the message type MATMAS and setup the partner profile to send IDOC from SAP to XI. I get this message below
Model view SCBIT40 has not been updated
Reason: the following ALE connection already exists in model view SCBIT01
..... message type MATMAS
..... sender M2ECLNT800
..... receiver M2ECLNT001
When I try to send the material through transaction BD10 it gives me a message
0 communication IDoc(s) generated for message
MATMAS
Thanks for your analysis.
Br,Hi,
I had one distribution model and I deleted it. I´ve created a new one using the same logical client and the same message type but when i go to ditribute I obtain this error :
Model view TEST_01 has not been updated
Reason: the following ALE connection already exists in model view PA/OM
..... message type HRMD_A
..... sender HRMCLNT400
..... receiver HRECLNT500
I´ve read your post,, could you explain mehow I can the client assigment?
thnaks a lot and best regards, Sapera -
No Communication IDOC generating for MATMAS --- Urgent
Hi,
I have two systems in the Landscape; one is DA1 and other is DA3. Both systems are exactly identical.
When I am triggering idoc of message type MATMAS from bd10 in DA1 systems, it successfully generating MATMAS idoc and I am able to see that idoc in we02 but when I am triggering MATMAS idoc in DA3 system; it is generating Master IDOC but it is not generating Communication idoc for Message type MATMAS and in we02 as well I am not able to see any such idoc.
Both the Systems are exactly same and I have checked ALE configurations in both the systems, they are same.
Can anyone suggest, what could be the problem.
Regards,
Varunhi,
As Bineah mentioned check the distribution model, distribute it and generate partner profile. verify all the configurations once again i hope it will do.
if any queries let me know .
~linganna -
Difference between Master Idoc and Communication Idoc.
Can anyone list out the difference between Master Idoc and Communication Idoc?
IDoc (for intermediate document) is a standard data structure for electronic data interchange (EDI) between application programs written for the popular SAP business system or between an SAP application and an external program. IDocs serve as the vehicle for data transfer in SAP's Application Link Enabling (ALE) system. IDocs are used for asynchronous transactions: each IDoc generated exists as a self-contained text file that can then be transmitted to the requesting workstation without connecting to the central database. Another SAP mechanism, the Business Application Programming Interface (BAPI) is used for synchronous transactions.
Form and content: IDoc terminology
As is often the case with proprietary technologies, SAP assigns specific, object-oriented meanings to familiar terms. When referring to IDocs, the term document refers to a set of data comprising a functional group of records with a business identity. (For example, all the data in a purchase order, or all the profile information of a supplier in a supplier master record.)
A message refers to the contents of a specific implementation of an IDoc; its a logical reference. This differs from a reference to the IDoc itself, which specifies the messages physical representation. Think of it this way: If youre watching a parade pass by, the mayor waving to the crowd from his limousine is the message, and the mayors limousine (which is specific to the mayor) is the IDoc. Youre building a logical object, and the IDoc is both its container and the vehicle that moves it.
The IDoc control record
Each IDoc has a single control record, always the first record in the set. The structure of this record describes the content of the data records that will follow and provides administrative information, such as the IDocs functional category (Message Type/IDoc Type), as well as its origin (Sender) and destination (Receiver) as in conventional EDI
Layout of an IDoc control record
This cover slip format informs the receiving system of the IDocs purpose, and the receiving system uses it to determine the correct processing algorithm for handling the arriving IDoc.
Data records
The data records following the control record are structured alike, including two sections: a segment information section and a data section.
In the first part of a data record, the segment information section describes the structure of the data that follows, for the benefit of the IDoc processor. There is a segment name (like an EDI segment identifier) that corresponds to a data dictionary structure to which the IDoc processor has access. The remaining information is useful for foreign systems, such as a partner companys Oracle system, which has no such data dictionary.
The second part of the record is the data itself, a storage area of 1,000 characters.
Status records
If youve ever ordered a package from a faraway location and tracked its progress using the Internet-based tracking utilities now provided by most major parcel carriers, youre familiar with the list of stops and transfer points through which a package passes on its way to you.
This collection of records is exactly what youll see in an IDoc that has begun its work. Following the data records in an IDoc, status records accumulate as an IDoc makes its way from one point in a process to another.
Typically, an IDoc will acquire several of these records as its does its job. They are simple records, consisting of a status code (there are more than 70 codes, covering a broad range of conditions and errors), a date/time stamp, and some additional status information fields for system audit purposes. In addition, as errors occur in the processing of an IDoc, status records are used to record these errors and the date/time of their occurrence.
IDoc Base
IDocs, as data formatting tools, enable the easy sharing of data between databases and applications within a company as well as being an efficient data courier between companies. Typically in SAP, a database of IDoc definitions exists, to which any application may have access.
This IDoc Base gives all the applications and processes in your company domain the capacity to send, receive, and process a document in a contextually appropriate way, without doing anything to the data. For example, a purchase order IDoc can filter through every process it touches, passing from system to system, accumulating status records to track its progress.
Every department using the data can use it appropriately without any cumbersome intermediate processes, because each department draws its key to interpreting the IDoc from the same source.
Multiple messages
One cumbersome feature of conventional EDI is the embedding of more than one functional record type in a document. The unwieldy X-12 888 Item Maintenance transaction set is an example: It purports to handle so many different configurations of product master data that it is horrifically difficult to integrate into an existing system.
IDocs, on the other hand, handle multiple messages with ease. Given the centralized IDoc interpretation that SAP provides to all its parts, its no problem to define an IDoc that will contain more than one message, that is, more than one data record type.
A customer master IDoc, for example, may contain customer profile information records for a customer with many locations. But it may also contain location-specific pricing information records for that customer in the same document. This is an incredibly efficient way of bundling related records, particularly when passing large amounts of complex information from system to system Records in a multiple-message IDoc -
Error while ORDERS05 IDoc transfer from R3 - PI - SNC
Hi Friends,
I am facing error in PI SXMB_MONI for ORDERS05 IDoc transfer from R3 - PI - SNC.
I have done all the configuration setup in Integration Directory for the Scenario, I am able to successfully send the IDOC for PO from R3 to PI but faced the following Error in PI.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Message Split According to Receiver List
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">PARTY_SERVICE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
*<SAP:Stack>Party and service not defined</SAP:Stack>*
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Also I am unable to Configure Sender/Receiver ID in PI > SXMB_ADMIN > Configuration, as while defining Sender/Receiver unable to add the Interface for Sender(ORDERS.ORDERS05)/Reciever(ReplenishmentOrderNotificatio_Out) although I am able to see the same in Integration Repository.
Also In Main message(Part of the message) as shown below, I am able to see Vendor in PARTY Element of xml message for which I have created the PO
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Message Split According to Receiver List
-->
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>ApplicationMessage</SAP:MessageClass>
<SAP:ProcessingMode>asynchronous</SAP:ProcessingMode>
<SAP:MessageId>0050568F-24A0-1DDD-B9F5-3F6DD541FF93</SAP:MessageId>
<SAP:TimeSent>2009-01-21T10:55:20Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Service>SAPECC6</SAP:Service>
<SAP:Interface namespace="urn:sap-com:document:sap:idoc:messages">ORDERS.ORDERS05</SAP:Interface>
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="SAPECC6" scheme="ALE#LI#LF">0000000006</SAP:Party>
<SAP:Service />
<SAP:Interface namespace="urn:sap-com:document:sap:idoc:messages">ORDERS.ORDERS05</SAP:Interface>
<SAP:Mapping notRequired="Y" />
</SAP:Receiver>
Please Suggest the steps needs to be done for resolving the Issue.
Thanks all...
Regards,
Nitin
Edited by: Nitin Patil on Jan 21, 2009 12:18 PMHi Nitin,
I completed the configuraiton but the PO came in PI successfully but stuck in PI with error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Error during parsing of SOAP header</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>HTTP server code 500 reason Internal Server Error explanation Error during parsing of SOAP header</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
can you please help what is the problem , I am not able to find out.
Thanks,
Menaga
Maybe you are looking for
-
Safari will not open after time machine restore
My old iMac (intel) had a hard disc failure the otehr day so I went out an bought a new one. Using setup assistant, I restored my old computer from Time Machine to the new computer. The old machine was completely up to date - had all the latest soft
-
I downloaded some albums using my iphone (3GS), I then synced it with my PC. Now all the album artwork has disappeared off my iphone but not off itunes on the PC. How can I get the album artwork back onto my iphone?
-
SELECT STATEMENT (Correct answers will be given full points.)
HI Gurus I am new abap help me with the select statement for these please Get BKPF-AWKEY where BKPF-BELNR = VBRK-VBELN + prefix 00. this is the reference number for printing in script(SD) i need to write in the text elements Get KNA
-
Net value is not reflecting from order to Invoice
Hi, I need some clarification here: I can able to see the Net value in the sales order but the same thing is not reflecting in to the invoice. What could be the reason and Error message is : Pricing error in ITEM 000010 in Invoice. Your suggestions
-
What email address do I put in to get my code?
I have an android device and do not understand how to get my printer to allow me to print. It tells me to put in an email address, which one? hpeprinter.com or the address associated with the account?