Creation Of Custom Transaction For RF enabled devices "mobile data entry"

Hello Everyone,
i need some information, or some material or some example's for creating custom transactions that will invoke the standard good issue transaction of sap from the handled device using the RF , so can anybody give some reference which will help me in creating custom transaction for a RF enabled handled device, which will invoke the standard sap goods issue transaction( mb1a) ,, there are some LM-transaction which do goods issue from the RF enabled handled device, but in my case i want to do goods issue using reservation as my input, so can anybody guide me or send some reference material matching to my problem, i would really appreciate it..
thanks in advance...
sapient2006

Hi Hussaini,
Here are the steps.
1> Customization needs to be completed in SPRO. Logistics Execution -> Mobile Data entry section. Also compare entries with LM01 for understanding.
2> In the 'Define menu management', you can create dynamic menus. For Menu or transaction type, if you enter "1", a menu appears; if you enter "2", a transaction appears. Custom transactions can be created and assigned here.
Once that is done, when you execute LM01 you will see your custom transactions come up. Make sure that these are created keeping in mind the RF device screen size and limitations.
Regards,
Anand.

Similar Messages

Creation of custom Transaction for confirm goods in SRM

Hi Experts
i need to create a custom transaction same as standard one for confirm goods/servics in SRM portal.
In sap GUI, the transaction is BBPCF03
Can you please suggest any good sources where i can learn to Custome Tcodes for my requirement
Thanks in advance
Edited by: kittu reddy on Nov 19, 2008 7:27 AM

Hi Hussaini,
Here are the steps.
1> Customization needs to be completed in SPRO. Logistics Execution -> Mobile Data entry section. Also compare entries with LM01 for understanding.
2> In the 'Define menu management', you can create dynamic menus. For Menu or transaction type, if you enter "1", a menu appears; if you enter "2", a transaction appears. Custom transactions can be created and assigned here.
Once that is done, when you execute LM01 you will see your custom transactions come up. Make sure that these are created keeping in mind the RF device screen size and limitations.
Regards,
Anand.

Two step confirmation with RF device (Mobile Data Entry) - 1st step only

Hello
I want to implement the following scenario:
- WM transfer orders are created, relevant for two step confirmation;
- a user working with RF device confirms the 1st step - picking;
- then the materials are transported physically to another building (the same warehouse number);
- another user working with RF device confirms the 2nd step - putaway.
For confirming the 1st step I tried to use standard transaction LM07. Confirmation of the 1st step is working fine but right after that a screen for confirming the 2nd step is displayed to the user. I would like this transaction to finish just after confirming the 1st step and not to proceed with the 2nd step immediately - because the confirmation of the 2nd step should be done by another user (with some other transaction).
What is more: if you exit the transaction manually after confirming the 1st step the system saves the TO number (in table LRF_WKQU) and in some circumstances triggers the screen for confirming the 2nd step even if you do not run LM07 - this is so called "recovery" function which is a nuisance in my case.
So my question is: is there a way to customize LM07 so that it finished processing automatically right after confirming the 1st step for a two step confirmation TO ? (and without storing data for "recovery" function). Or maybe some other mobile-data-entry transaction should be used for that ?
regards

Hi Vlad,
One more information, which i would like to communicate on this issue.
We have raised OSS message to SAP on this issue. They have replied back that, on screen 1302, we have some custom code which is interfering with the system behavior.
As of now, we have analyzed at our end, and we found that, the enhancement at screen 1302 is restricted for the functionality, and in theory, this enhancement should not be effecting at all the system behavior.
SAP has suggested to test the scenario , without any enhancement on screen 1302.
Still we are in discussion with SAP, and try to find out the resolution.
Can you also check in your system, if you have any enhancement on screen 1302 ? And if yes, does it interfering with the stander SAP codes.
Thanks & Regards,
Raj.

Adapting custom driver for a robotic device that is interfacing with an FPGA

Hi,
I have a custom driver for a robotic device that I'd like to interface with an FPGA that is reading the digital encoder signals. I am a novice at programing driver files so any help would be much appreciated.
Thanks!

Hey Xaq,
Well we had some other side projects to work on, and I'm no back working with the Windows/FPGA interface. I have one VI that is able to determine the relative position of the PHANTOM device. We're doing this by using 3 loops (one for each motor), running in parallel. So from LabView I have the x,y,z location of the device. As a first pass I want to build a dll that allows my C program to query to position at any time.
A couple problems here:
We probably need to break up the vi into several sub vi's, but I'm not sure where to start. Should the contents of each loop be placed into its own file?
Also we've just upgraded to 8.2, and I'm noticing the method for building dll's has changed significantly. I was not involved with the conversion process, and I'm a bit confused about the tree structure. Under My Computer we have the FPGA target (this comes from our original *.lep project). If I go to Build Specifications here, the only option is to create a new Source Distribution. If I go back up a level to My Computer, the Build Specifications allows me to build a shared library, but now I can't find the vi listed for the FPGA target.
Please let me know what I should do next. Thanks!
--Neel

Custom Transaction for RSDMD

Hello Friends,
I am looking to create a custom transaction for RSDMD (Master Data Maintenance) for a specific MDInfoObject ( say for example ZIO_TEST1).
I did try following:
1. Used SHD0 - created a Variant.
    I did see the message Variant "TVAR_RSDMD" saved.
2. Used SE93 to create ZVAR1
      Selected fourth radio button-
         Transaction With Variant
3. In the next screen -
    a. entered transaction text - some desc.
    b. for transaction entered - RSDMD
    c. When I try to enter transaction variant - I get an error message "No transaction variant exists."
      I cannot see the drop-down list also.
Please help!! help!!.
Thank you,
Pramod.

Hi,
Transaction variant?
http://help.sap.com/saphelp_nw04/helpdata/en/67/232037ebf1cc09e10000009b38f889/content.htm
Transaction Variants
http://www.erpgenie.com/abap/tvar.htm
Regards,
San!

Problem on ios 7.0.4 on iphone enable your mobile data uncheck to green (enambled) works great ring and shows who ringing may work on 4s and five not tested please try get back to me thanks

on iphone enable your mobile data uncheck to green (enambled) works great ring and shows who ringing may work on 4s and five not tested please try get back to me thanks

I'm sorry, but you are going to have to try a little better to explain your issue and what your question is, or post in your native language.

What are the settings in i phone 4s for connecting internet in mobile data ?

what are the settings in i phone 4s for connecting internet in mobile data ?

Did you ever get a reply to this. I have the same problem. I have the same problem when even when I reply to an email... no photo shows up in my new reply message. The only way I have figured out is to use the "forward" option.
But this still does not solve the problem when people email me back... I have no idea what photo they are speaking of. Instead of a photo... there is a <photo name of some sort>.
Let me know if you ever hear on this one.
Many thanks.

Custom Transaction for maintence of custom table

hi friends,
            i have created a custom table. and for it i need to have a custom maintenence transactions.the custom transaction should consits of insert, copy a row and upload....
but i dont think we have an upload feature in SM30,
now my doubt is how can I solve this,,, by any other method & dilaog program being my last priority.
Please let me know if u guys get some idea
Thanks in advance
Tina

Hi
U can use the fm GUI_UPLOAD to read and store the file in internla table, after transfer the data from internal table to database table. This is an example:
PARAMETERS: P_FILE(120).
DATA: FILENAME TYPE STRING.
DATA: T_FILE LIKE TABLE OF <ZTABLE>.
START-OF-SELECTION.
FILENAME = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
       EXPORTING
            FILENAME = FILENAME
       TABLES
            DATA_TAB = T_FILE.
INSERT <ZTABLE> FROM T_FILE.
You can use this program only if the file have the same structure of Z-TABLE, otherwise you have to elaborate the data of T_FILE before inserting in the database.
Max

Custom transaction for WORK ORDER in ECC

HI all,
I need to create a custom transaction which incorporates the functions of transactions IW31,Iw32 and Iw33.DO I need to create a custom Module ppool for the above requirement or can I use a BDC for creating,updating and retrieving the created Work orders?

Hi Rads1234,
yes, you can use BDC to implement it. besides, you can use BAPI_ALM_ORDER_MAINTAIN to do this, which is better than BDC from my point of view.

Creating a custom keyswitch for external midi devices / channels possible?

Hi, and thanks in advance...
In Logic Pro, is there an existing way to create custom keyswitches for use with EXTERNAL multi instruments? Basically, I would like to use 1 midi channel in logic, to be able to keyswitch between multiple midi channels on a gigastudio machine. For example... 1 track in the arrange page for Violas, but creating and assigning a keyswitch to switch between multiple channels and articulations on the external giga on that track. That way, I could consolidate all articulations for each instrument group onto one track.
Perhaps an existing environment or object is already available to do this? Any help would be appreciated!!
Thanks

I made just such an environment (keyswitcher) some time ago. Please visit this link at Logic Pro Help where you can download it for free:
http://www.logicprohelp.com/viewtopic.php?t=10569&highlight=
There used to be an explanation of how it worked posted somewhere, but I can't seem to find it now. However, feel free to post back here or on LPH if you have questions as to its operation in detail. But for now, the basic gist:
This environment lets you change the channel of incoming notes, thereby accessing different articulations within a single multi-timbral instrument. The original intention was to use the capslock keyboard as a means to switch the channel between 1 and 16, although any external keyboard or even a portion of your existing keyboard controller could be used with some slight modification to the environment.
After you download it, simply go into the Clicks/Ports layer of the Environment and connect your capslock keyboard's output (as it appears on the large Physical Input object) to the monitor labeled "check incoming capslock notes". This bit of manual programming is necessary because the capslock output will appear in a different place on everyone's system. Then, enable the capslock keyboard and press the number 5 to put the keyboard into the correct octave for this environment. Then by playing the capslock notes you should see the channel indicator change channels.
There is a failsafe feature built into this environment (hence the complicated look of its programming) which prevents stuck notes. No matter when or how often you play notes, you can switch channels (i.e., switch articulations) and not worry about stuck notes after lifting the keys you played on the prior articulation, no matter which channel it was on.
Again, post back here or over at LPH if you want more details.
-=iS=-
!http://www.score2picture.com/logicpix/keyswitcher.jpg!
Message was edited by: iSchwartz

Custom transactions execution from base on conifguration table entry.

Hello,
I have a reqiurement where I name of the custom Transaction programs are maintained in a configuration table.
I am creating a custom report on whose execution, the selection screen should show the name name of all those transaction proigrams in form of radio button which I can execute.
The problam is that the configuration table can have multiple custom transaction entries over there and it can get changed every day. How can I acieve this reuqirement ?
Regards,
Jainam.

Thanks Narendra and Rob for your inputs.
Narendra
I liked the approach of using table control with the table control have a radio button and then control the number of radio buttons based on the config table entries..
How can I achieve this table control approach because I have never used this approach before ? Can you send me a sample example ?
Thanks.
Regards,
Jainam.

Creation of custom BAPI for FB02

Hi Guys,
I want to create custom BAPI to update FB02 and for my requirement i found there is no standard BAPI available since i need to update lot of other fields in FB02 that is the reason, i want to use CALL TRANSACTION inside the BAPI to update FB02 but i found its not working.
Is it really possible to use BDC( Call Transaction ) inside the BAPI??? if it is possible any reason why its not working for me and if it dont work, how do u think i should update FB02 - plss dont mention standard BAPI's or FM.
Note: I have seen some Standard BAPI's using CALL Transaction inside them but in my case its not working.
Thanks & Regards,
Pavan

Your question is to create custom BAPI
Follow these steps.
1. Find the fields you are giving values on the screen and create a structure. you should only use structure and must not use that structure in other ways.If you use it in other objects BAPI will be frozen.
2.After you create Structure you create function module and mention that structure in that.Later release the function module
3.Later you go to SWO1 and add that method in that and realese that also
4.Finally you can find your BAPI in BOR
You can also find solution to your question in the following link
http://www.****************/Tutorials/BAPI/CustomBAPICreation/page1.htm

BEx Query Report - Customer transactions for a period.

Dear Experts
my management has asked me to create a Customer Statement Query.
Sample Format
Customer Code | Document Date | Document No | Transaction Type | Opening Balance (Beginning of month) | Credit | Debit
Necessary Data Available in FI AR line item cube.
since i am new to SAP BI i am finding difficultly in calculating the opening balance in the first row. it will be a great help if somebody can assist me in creating the query in the above format.
thans
viru
Edited by: Lankem-IT on Apr 27, 2011 5:15 PM
Edited by: Lankem-IT on Apr 27, 2011 5:19 PM

Hi
Thanks Ashutosh Singh & AP_SAP for replying.
i am planning to use : 0FIAR_O03 DSO for this purpose.
logic given to me by management is like this
Statement is for a month. Example ( 2011/04/01 to 2011/04/30).
opening balance is as at 2011/03/31 (Cumulative Debit/Credit Amount .) on First Row
then followed by Statement period Transaction
Fields : Document No , Document Date , Transaction Type , Debit Amount , Credit Amount
Then Finally Closing Balance as at 2011/04/30 on the Final Row(Cumulative Debit/Credit Amount = Opening Balance + Debit Amt - Credit Amt)
Regards
Viru.

OAS Custom Help For Web-Enabled Forms

Anyone had experience implementing a customized help system into Web-Enabled Forms running on OAS. Regular Oracle Forms can display a help system using a specialized Oracle Form D2KHMain.fmx or using WinHelp with the library D2KWhelp.pll. Will either of these work when running the Forms on the Oracle Application Server? Java Help has been suggested? Any documentation would be helpful? Thanks.

do the following:
1. write a java program that read from the registry. you will use the program as a javabean later on.
2. compile the source and create a class/jar
3. sign it (goto sun site for details on signing class/jars). you must sign the java program or it will not be able to have access to the registry. make sure you do all the steps by following sun's instructions.
4. put it on your web server and modify the html file you use to start your developer application to include your class/jar.
5. oracle has some demos on attaching javabeans to forms. use them to help you.
6. use the program you wrote in step 1 as a javabean in your forms.
Yossi

Custom transaction for FBL5N

HI,
I need to copy the program RFITEMAR to ZRFITEMAR and should create a ZFBL5N.
I created a ZRFITEMAR program and created ZFBL5N.
When I am executing program standalone it is not giving any dump, but when I am trying to execute newly created transaction it is giving the following dump.
Could you please tell me why and what needs to be done.
Runtime Errors         LOAD_PROGRAM_NOT_FOUND
Exception              CX_SY_PROGRAM_NOT_FOUND
Date and Time          08/04/2011 11:52:53
Short text
     Program " " not found.
What happened?
     There are several possibilities:
     Error in the ABAP Application Program
     The current ABAP program "RSDBSPMC" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
     or
     Error in the SAP kernel.
     The current ABAP "RSDBSPMC" program had to be terminated because the
     ABAP processor detected an internal system error.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_PROGRAM_NOT_FOUND', was not
     caught in
    procedure "%_IX_INIT" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    On account of a branch in the program
    (CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
    or a transaction call, another ABAP/4 program
    is to be loaded, namely " ".
    However, program " " does not exist in the library.
    Possible reasons:
    a) Wrong program name specified in an external PERFORM or
       SUBMIT or, when defining a new transaction, a new
       dialog module or a new function module.
    b) Transport error
How to correct the error
    Check the last transports to the R/3 System.
    Are changes currently being made to the program "RSDBSPMC"?
    Has the correct program been entered in table TSTC for Transaction "ZFBL5N "?
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "LOAD_PROGRAM_NOT_FOUND" "CX_SY_PROGRAM_NOT_FOUND"
    "RSDBSPMC" or "RSDBSPMC"
    "%_IX_INIT"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
Edited by: SAP ABAP79 on Aug 4, 2011 6:12 PM

Hello,
It seems like there is some configuration missing for customize transaction.
You can put a break-point where it is giving dump and analyze the data fetching which leads to "%_IX_INIT" "(FORM)"...
Thanks

Creation Of Custom Transaction For RF enabled devices "mobile data entry"

Similar Messages

Maybe you are looking for