Creation of delivery addresses(not for plants) in the table ADRC!

Hi,
We are running on SRM 5.0(Standalone scenario).We have the following issues:
We need to create the delivery addresses also thorugh a custom program i.e. the Address number needs to be created in the ADRC table.There is a std FM "BAPI_BUPA_ADDRESS_ADD" for creating ship to addresses for a BP (namely Organisation) but we cannot use that as we need to create the addresses in the ADRC table in the same way as we create the addresses in the BASIC DATA tab of the SHOP transaction.Any idea how this can be done?
Any input will be highly appreciated.
BR,
SRM Tech

Not sure try this FM ADDR_COMM_MAINTAIN.
Regards, IA

Similar Messages

The currency is not getting updated in the table VBAP

Hi ,
The currency is not getting updated in the table VBAP. The currency was suppossed to be copied from the header table VBAK for a Sales Order. When the user creating a Sales Order the currency WAERK is not shown in VBAP table. VBAK-WAERk is in EUR . Does anyone know why is this happenning?
Currency is maintained in the Customer Master, Material Master and Sales Org. Any suggestions?.
Also it is happened for only one line item in a set of line items , Other line items did display the currency field.
The net Value has data in it .
The system is ECC 5.0
Regards,
Senthil

Dear Senthil,
Please apply the following notes (if they apply to your support pack level) and retest:
1460621 VBAP-WAERK is deleted after the sold-to party is changed
1426441 VBAP-WAERK deleted for subitems
1493998 VBAP-WAERK deleted for subitems
This should resolve the issue. I hope this helps.
Best regards,
Ian Kehoe

Transportation lane KEY not getting generated in the table

Transportation lane KEY not getting generated in the table
Hi folks,
The issue is like this :
We have a weekly workorders upload program from legacy systems to SAP-APO. The legacy planners send a .CSV file containing material-wise workroders. A customised zee program picks these quantities & writes them in Prod.planned keyfigures in SNP planning book. This process is done for the manufacturing locations only.
Lately workorders for two particular material M1 & M2 had failed to get upload. It gives the error 'NO VALID SOURCE OF SUPPLY COULD BE FOUND' in its Job log. We did some debugging & found that for successful materials the TRPID is getting generated in the table /SAPAPO/V_TRPROD whereas this TRPID is missing for M1 & M2. Why this is happening is our main concern. We tried deleting the PPM & creating this again, assuming that the PPMID is the precursor for generating this TRPID, but this yielded no results.
____ for successful upload______________
se16 --> /SAPAPO/V_TRPROD
Version = 000
LOCTO = LOCID KEY for manufacturing location
MATID = MATID KEY of successfully loaded workorder
Enter
This gives the following results
TRPID = TRPID KEY
LOCFR = LOCID KEY for manufacturing location
LOCTO = LOCID KEY for manufacturing location
MATID = MATID KEY for successfully loaded workorder
( This seems a self-lane, i.e both TO & FROM location are same)
____ for unsuccessful upload________
se16 --> /SAPAPO/V_TRPROD
Version = 000
LOCTO = LOCID KEY for manufacturing location
MATID = MATID KEY for unsuccessfully loaded workorder
Enter
This gives the following results
Error = No Table entries found for specified KEYS
We are perplexed why this TRPID is not getting generated for these two particular material M1 & M2?
We have deleted their PPM & re-created them to cross-check if the PPMID KEY is the trigger for generating the TRPID key. This didn't work!
Please let us know in case someone faced a similar issue.
Many Thanks.
Kumar
Edited by: Blue Lotus on Jun 9, 2011 2:44 PM

Yes Anand.
We deleted the PPM & created it again, which didn't work.
Later on we deleted the product itself from APO & re-CIFed it from R3 & then re-created the PPM.
The PPMID which was missing earlier is now getting created! However no luck with the TRPID.
Why this TRPID is not getting generated in our only concern
Regards
Kumar

TDS amount not getting updated in the table under the field QBSHB

Dear Friends,
The TDS amount entered while booking the vendor invoices through MIRO T-cde, is not getting updated in the table BSEG under the field QBSHB.
Kindly let me know the reason for the same and guide me to correct it
TIA.
Regards,
Vincent

HI Vincent,
Bseg-QBSHB field is relavent for classic WT.
I hope you are using the EWT.
Hence if you post a document through MIRO it will not update
(but if you post document FB60 it will update but wrongly).
Reason is Miro document is posted through interface.
Hence SAP is suggested to not refer the Bseg-QBSHB and etc., fields.
refer only with_item table.
Please refer the below replay from SAP
Please refer the below note .363309
Please review attached note 363309 for detailed explanation
BSEG-QBSHB is designed to fill for the classic withholding tax. And
extended withholding tax information is stored exclusive in table
WITH_ITEM.
You can check in table BSEG for the fields and will find that system
do NOT update field BSEG-QBSHB.
In your line layout,you define a field BSEG-QBSHB. But actully the field
of vendor/customer line item is filled with zero from FI. Thus,it shows
zero in line item display.
And as note 363309 says,
"Remove the field which contains the withholding tax information
from your display variant.
If you want to display the withholding tax information, double-click on
the document number and subsequently choose 'Withholding tax' button."
(BSEG-QSSKZ, BSEG-QSSHB, BSEG-QBSHB) field is not relavent for
Extended withholding tax and not suppose to use in report FBL1N.
It basically does not make any sense to use the withholding tax fields
of the document line items (BSEG-QSSKZ, BSEG-QSSHB, BSEG-QBSHB) with the
activated extended withholding tax.
regards
Madhu M
Edited by: M Madhu on Jan 31, 2011 1:19 PM

Create a Navigational Hierarchy for filtering with the Table API

Hello,
I've built a WAD report acourding to the how to document: "Create a Navigational Hierarchy for filtering with the Table API".
It works great but i dont know How to make the hirarchey to show the key and the text.
Please Advice.
David

Hi Kenneth,
please have a look in the source of the executed Web Application. What is inside of the <div> with the id filter?
You should also find a td tag with id hier_xyz with xyz the filter inside of the <div>-Tag with id filter.
Also check whether you have a javascript error.
Have a look on the Javascript function set_style. Perhaps you can paste it here, than I can have a look.
Heike

Shopping cart delivery address not transferred to ECC PR

Hi Forum,
We recently upgraded from SRM 701 to 713 and to ECC EHP6. After upgrade the SC Delivery address is not getting transferred to back end PR instead the PR shows Plant address as delivery address. As per this wiki article
Shopping Cart Delivery Address transfer from SRM to ECC - Supplier Relationship Management - SCN Wiki
the standard behavior is that SRM Delivery address should be transferred to PR but to our OSS SAP replied that standard behavior is opposite i.e.
PR Takes Plant address as delivery address as default.
Response from SAP:
Please see that the standard fields of EMLIF and LBLKZ are not
available in BAPI structures. This is the standard functionality of
BAPI_REQUISITION_CREATE.
If you are using a release newer than Release 4.7 , which I believe
you are , you can use BAPI_PR_CREATE instead. However , this is not
possible using BAPI_REQUISITION_CREATE.
I am sorry that I do not have a better answer for you at this time but
the behavior that you are experiencing is standard SAP system design.
Q1. What is the standard behavior - SC Delivery address is transferred to PR or Plant address is used in PR?
Q2. What are the changes required to transfer SC Delivery address to back end PR?
Thanks,
Anubhav

Hello Anubhav,
Its unfortunate that SAP has not tested the transfer of Delivery Address from Shopping cart to ECC Requisition.
SRM uses BAPI_REQUISITION_CREATE which is deprecated in the newer releases of ECC. This is why the Delivery address is no longer transferred to ECC.
Check this note:2132886 - BAPI_REQUISITION_CREATE - Delivery address is not updated
Interestingly I found another note in SRM area which asks customers to themselves implement a call to BAPI_PR_CREATE to fix such issues.
Check note:2108097 - Shopping cart transfer to ECC fails when using BAPI_REQUISITION_CREATE
We have an upcoming Go Live with SRM 7.13/ECC 6.17 and I just noticed that Delivery address from Cart is not transferred to ECC Requisition.
I have to rush an urgent change due to this.
I dont know what else data is not being transferred without detailed testing.
Thanks,
Sushil.

How can I customise Thunderbird message columns to show sender raw address (not display name) and the "Received for" email address that was used to reach me?

I find it increasingly important to be able to see a sender's actual email address rather than just display name, as they usually don't show a company name - which a domain always would. Is there a way to customise settings/write a script/tweak files to add raw email & domain name columns? When dealing with a number of people at the same company it is hard to order or glance through a list of emails to find them. I also know 2 people with the same name at different companies and it is impossible to distinguish!
Secondly, as a related column addition, since a number of email aliases reach me it would be useful to have a column to show the "Received..for" part of the message source which reveals the actual email used in the To/CC/BCC which led to me. Again can this be tweaked or scripted?
I have programming experience but have not made add-ons and would be open to a suggestion which involves creating a custom add-on if adding columns with custom values is possible that way.
Best Regards,
Drew

Extended message headers can be searched from Edit/Find/Search Messages, or the folder context menu, by adding custom headers to the search criteria. So, you might be able to create a search on specific properties of a message.
The method of adding custom headers to searches is the same as the one described here for filters:
http://kb.mozillazine.org/Filters_(Thunderbird)#Custom_headers

Error during creation of delivery challan (VL01N) for batch

Hi,
At the creation of delivery challan during batch determination the system displays the message 'The material is not handled in batch'. Although we have despatched this material considering batch determination previously with all customisation.
Kindly revert back as soon as possible.
Regards,
Goraksh.

Hi Goraksh,
I think somebody removed the check box of "Batch" from material master.
Please check and revert.
Regards,
MT
Edited by: M T on Apr 29, 2010 4:28 PM

Third Party PO - Delivery Address not printing

Hi,
I have a scenario where the Delivery Address is not getting printed in the Third Party Orders randomly. do i need to modified the Z program
or there are missing configuration ?
If i modified the Z program which are the table do i need to use ?
Thanks..
Nizam

Hi,
When i check my po at the delivery address tab view, i found out that only address field contain data and the customer field does not have any data.
if the address have value,i can link the PO with table ADRC to grap the customer data. but why my customer field does not have any value ? is there something missing ?

Customization for Plant missing in table Plant settings

Hi CIN Experts,
The CIN setting are maintained for Plant and company. J1IIN, Excise invoice creation is OK for billing docs.
But the error is while using J1IIN for proforma invoice(Delivery based). Message no. 8I303.
Thank You.

Check this thread
[Re: Error during excise invoice creation|http://forums.sdn.sap.com/thread.jspa?threadID=1517554]
Else, go to IMG Logistics-General > Tax on Goods Movements > India > Basic Settings > Maintain Plant settings. There check whether you have maintained the plant code with the Excise Registration code. Most probably, the said error will also come if any setting is not done properly here.
G. Lakshmipathi

EDQP: After creation of Item definition, not able to find the the same item in Standardize items tab.

Hello Experts,
This is the first time am creating the item definition in the data lens, after creation of item definition, thought of standardizing it through Standardization Items tab. Not able to find the created item definition in the Item Definition Field LOV.
Do we need to do any set up to get it available in the Standardization Items tab. For information, I found two things as follows
1.this item has not assigned to any of sample data records.
2.Did not find created item definition name in the Item definition field..( It has showing only text as 'Not Item Definition')
Can any plz help me in creating Item definition completely. After gone through the Knowledge studio ref guide developed to some extent.
Thanks,
SSagar.

Can you put some screenshots of what you did and what you are seeing?

Firefox "hangs up" randomly during use, not for any of the reasons on the "Firefox hangs" article. Help?

I'm running Window 7, on a Dell XPS L501X using an Intel Core i& Processor with a 64-bit OS (trying to give some hardware info, however hardware illiterate I may be.)
This issue started less than a week ago, before I updated to version 6.0.
Firefox would, at random it seems, not respond to user input in the form of clicking, scrolling, what-have-you. when clicked the first time the window (any number of them), would wash-out a bit and get a (Not Responding) added to the title. It will remain like this for 10 second to almost a minute.
I did go through each and every "Firefox hangs" suggestion and none of them fixed the issue.
This happens even when there is nothing being loaded, on websites with nothing TO load really. This has grown increasingly annoying, and the only articles I can find that even address this problem online suggest just switching browsers.
I'd like to avoid that since Firefox is fantastic and, so far, has meet and exceeded all my expectations and made my overall Internet experience so much better.
This issue occurred twice while working on this inquiry.
Please help.

I checked the add-on manager; Java Deployment Toolkit 7.0.510.13 10.51.2.13 (two separate numbers, but shown on the same line) is set to Ask to Activate, along with a warning to use it with care. However, when I click for More Information I am told that it is blocked without any suggestion for how to unblock it. Java Platform SE 7 U51 10.51.2.13 is set for Always Activate, and there is no prompt for More Information. I recently installed the most recent version of Java; this was when the absolute inablility to use it began (this applies to the NYTimes Chess Player, the Acrostics program, and possibly others; I can still do the Sudoku, although with a warning when I first use it at a particular session). I have checked the articles mention in cor-el's response, but their application to my problem is not clear. On question, however--are the Java versions showing in my add-on manager the most recent ones that I just downloaded? If not, how do I get add-on manager to recognize the most recent versions (which, according to Java, are the only versions on my computer). Thanks for your help.

Airplay works for one user but not for another on the same machine

I have the problem where airplay works for one user but not for another and both users are on the same machine. For the user where it does not work, everything appears normal, it's just that there is no sound being transmitted. I have tried restarting the Airport express, restarting iTunes, repairing disk permissions. Any ideas about what can be done to resolve this?

my /etc/group:
root::0:root
bin::1:root,bin,daemon
daemon::2:root,bin,daemon
sys::3:root,bin
adm::4:root,daemon
tty::5:
disk::6:root
lp::7:daemon
mem::8:
kmem::9:
wheel::10:root,hans,ibm,gast
ftp::11:
mail::12:
uucp:x:14:
log::19:root
locate:x:21:
smmsp::25:
http::33:
games::50:
network:x:90:
video:x:91:
audio::92:ibm,gast
optical::93:hal
floppy:x:94:hal
storage:x:95:hal
scanner:x:96:
power:x:98:
nobody::99:
users::100:gast
dbus:x:81:
hans:x:1001:
vboxusers:x:108:hans
policykit:x:1002:
hal:x:82:
kvm:x:78:
nx:x:85:nx
avahi:x:84:
camera:x:97:
gdm:x:1003:
gast:x:1004:

I was trying to use the Matlabscripting VI, but it says it is for instructional purpose and not for research and the system is getting stuck.When I used it two days back it worked.Could U plz tell me what the problem is??

I have Labview 7.0 and Matlab 6.5 installed on all the computers at my School. When I tried to use the Matllab Scripting Window for the first time, it worked, but after two days when I was trying to run the program, there was a meesage saying that the License is for instructional Purpose only and not for Research or commercial use and the Labview is getting totally stuck. I need the Matlab Scripting VI for my Project,could anyone suggest what I shd do or is there any other method by which I could do that.

Hello Medha,
Thank you for contacting National Instruments.
From the information you have provided, I am not sure what is causing your problem. Make sure that you do not have an evaluation license for LabVIEW.
What, if anything, was changed in your VI before it stopped working? Will it run without the Matlab script?
If you continue having trouble getting your VI to work, please respond with more information. If you like, you can post your VI (along with any necessary sub-VIs) and I will take a look at it.
Have a great day,
Sean C.
Applications Engineer
National Instruments

Not able to get the tables in crystal report 2008

Hi,
I am using crystal report 2008 and trying to connect MS SQL using OLE DB (ADO) connection. After giving all DB credentials data base tables are not appearing in the connection. how to get the tables for selection in crystal report 2008.
Regards,
Sree

In the CR Designer, select the connection and press the right mouse button. Select Options in the context menu and check if there is an entry in the Table name fiel. Maybe you have a placeholder there that does not match the names of the tables in the database. Just remove it, close the window by pressing OK and refresh the connection browser (press F5). Unfold the connection again and check if you can see the tables now.
Regards,
Stratos

Creation of delivery addresses(not for plants) in the table ADRC!

Similar Messages

Maybe you are looking for