Creation of depreciation area for posting of parallel currencies postings

while i am posting f-90 asset e. auqsiation its giving error massage
"Customizing inconsistency (contact your system administrator)
Message no. AC496
Diagnosis
Company code BP01 manages parallel currencies in Asset Accounting. For each area that posts automatically online to FI, you have to define one dependent depreciation area that adopts both identical values and depreciation terms from depreciation area 01, and which is assigned to currency type 60 and currency INR. There is no depreciation area of this type defined for depreciation area 01.
Procedure
Check your Customizing settings."

Hi Venkat,
Create a New Depreciation area with APC Values and Depn values identical to Value 01.
Then goto valuation> currencies
Specify the Use of Parallel Currencies> and assign the currency type and valuation view to the new depn area. tick the identical values
then goto
Define Depreciation Areas for Foreign Currencies> give the parallel currency against the depn area
Now try doing the transaction.
Please revert back if you still have any issues.
Thanks,
Vamsi

Similar Messages

Parallel depreciation area not posted when trying to settle an order.

Hi,
We have requirement of using parallel currencies in one of the cocode.So I havee set up parallel currencies in AA as well.
We have three currencies EUR as Local currency, USD as Group Currency and CHF as Index-based Curremcy.
I have set up Depreciation areas
01 Book depreciation areau2014posts in real timeu2014leading ledger 0L
02 Book depreciation area for CHFu2014posts Dep only u2013Z1 european ledger
10u2014Statutory Depreciation areau2014Do not post
19u2014Derived Dep area (01-10)
29u2014Dervied dep area (02-01) Posts APC onlyu2014Z1 european leading ledger
30-Consolidated Balancesheet in local currencyu2014do not post
31u2014consolidated balance sheet in group currencyu2014do not post
32u2014Book dep in Group currency u2013do not post--assigned USD in OABT
42-Book dep in Group currency-do not post --assigned CHF in OABT
I have selected Indentical and TTr check box for dep areas 02,31,32, & 42.
I have done the consistency check and it shows no errors in depreciation area set up.
When Trying to settle an internal order in KO88 to a fixed asset I am getting the below error message.
*Data inconsistency: Parallel depr. area is not posted Message no. AAPO104*
Diagnosis
For chart of depreciation ZCH, you defined this area (or these areas) as parallel depreciation areas for depreciation area 01. In the current transaction, however, not all of these areas are posted. This is not allowed.
Procedure
Check if the transaction type is limited to certain depreciation areas. If there is such a limitation, add the missing depreciation areas for the transaction type.
Check if the asset that is being posted manages all these depreciation areas.
I have checked the transaction types and they are not limited to any depreciation areas. I have activated depreciatio areas in the asset class and maintained the account determination nad assigned g/l accounts.
Please help me if I have missed any settings.
Thanks & Regards
Nirmala

Hi,
AAPO104 is generally a customizing error: the check points to consider are generally the following regarding parallel currencies: I think you have checked most of them already...
* The parall. dep. area must have the same settings as the original area (e.g. allowing APC).
* The parall. dep. area must set for identical values take over.
* The parall. dep. area must set for identical parameter take over.
* The parall. dep. area must be assigned to the currency type which is defined as parallel in FI in trx. OB22 (e.g. 30).
* The parall. dep. area must be activated in the asset class (transaction OAYZ)
Furthermore, a problem can also be that in OABT you have a parallel area customized, taking value from another area, which is customized and seen in T093. If for example this parall.area is missing on your Asset Under Construction but is there on the final asset this obviously will create the error AAPO104, too.
In any case check your settings are correct in regards to parallel depreciation areas. They must manage same values as original areas. If they don't it cannot be a parallel area.
Maybe you also need to consider the information in SAP note 317806.
Also, looking at your different depreciation areas above, it looks that you have set up a ledger scenario (areas 01 , 02 and 29). I wonder, do you have a correct set up for the parallel currency for your ledger scenario? If I am not mistaken, I don't see a derived parallel currency area. Could this be the problem?
Regards,
Brigitte

Post revaluation to selected depreciation area for an asset

Hi,
We are using depreciation area '01' for posting to GL accounts and '02' for fiscal reporting. It turned out that couple of assets had wrong depreciation key specified for depreciation area '02', which resulted in wrong depreciation calculated for '02' in last 3 years.
We would like to correct it now, once we discovered this issue. One of the ideas was to create new revaluation transaction type which is active only for depreciation area '02', which will only change value of asset in that particuaral area without affecting correct '01',
However, after configuring new transaction type in AO84 and assigning it to '02' depreciation area in OAXJ, when I tried to run ABAW for this asset - it gave me error AA 380.
+Inconsistency between the specifications for transaction type Z11 and for the depreciation areas in chart of depreciation PTI.
Depreciation area 02 is defined (in Customizing), so that it is required to take over values from area 01. However, one of these ares cannot be posted to, due to the specifications in transaction type Z11. This combination is not allowed.+
Is it possible to configure postings only to one depreciaton area? If not - is there any other easy way of revaluating only one depreciation area for an asset.
Thank you,
Karol
Edited by: Karol on Oct 6, 2011 9:54 AM

Hi Blaz,
Thank you for your reply. I am trying to increase the value of the asset in depreciation area 02, because due to wrong depreciation key it got fully depreciated last year in 02. I want to add the value to 02 which should have not been depreciated in last 2 years. Is there a way to increase its value using ABAA?
Thank you,
Karol

Creating depreciation area for non leading ledger

Hi,
I want to configurate a depreciation area for a non-leading ledger. This is my scenario:
01-Accounting area leading ledger. Group legder: 0L (on line)
02- Accounintg area non leading ledger. Group ledger N1 (Area posts APC only directly)
03-Depreciation non leading ledger. Grouo ledger N1 (Area posts depreciation only)
Is it correct to created this 2 areas for non leading ledger?
Thanks,
Cecilia

Hi Cecilia,
additionally to my colleagues:
For each additional set of accounting principles, you create one real and one derived depreciation area.
Real Depreciation Area:
1. In Customizing for Financial Accounting (New), choose Asset Accounting - Valuation - Depreciation Areas -Define Depreciation Areas.
2. Assign both depreciation areas to the same ledger group.
The ledger group you assign them to is not allowed to contain the leading ledger.
3. In the Posting in G/L field, choose Area Posts Depreciation Only.
Derived Depreciation Area:
It is easiest to create the derived depreciation area using the Wizard.
4. In Customizing for Financial Accounting (New), choose Asset Accounting - Valuation - Depreciation Areas - Set Up Areas for Parallel Valuation.
5. In the Posting in G/L field, choose Area Posts APC Only. Specify that this derived depreciation area represents the difference between the real depreciation area for parallel accounting and the
master depreciation area.
You do not have to set up a separate account set for these new depreciation areas. Instead you use the account set of the master depreciation area. In this scenario, you do not have to create any new accounts in the chart of accounts or in the company code. You also do not have to create a new financial statement version.
So a typical dep.area setting for a parallel ledger at you is like:
T093
AFABER ABVOR1 AFABE1 ABVOR2 AFABE2 BUHBKT LDGRP_GL
01...............................00...........................00............1.............0L
02...............................00...........................00............3.............N1
03..................+...........01............ - ............02............6.............N1
Regards Bernhard

*Depreciation reversal with conversion in Parallel Currency Dep Area*

When we creat depreciation run in version 4.6c (RABUCH00) the program performs a batch session and post depreciation entry in Company Code currency -in our case-(GBP) and parallel currency (USD) as, entry should be
posting key GL A/c                        GBP USD
75              Accumulated Depn A/c   76GBP    38USD
40              Depreciation Exp A/c      -76GBP   -38USD
entry is posted in other depreciation area (which is opted for posting) in dep area currency USD.
We are observing a issue where the entry for a particular
asset is actually posted as
posting key GL A/c                        GBP USD
70              Accumulated Depn A/c   76GBP     1USD
75              Accumulated Depn A/c -38GBP   -1USD
50              Depreciation Exp A/c     -76GBP   -1USD
40              Depreciation Exp A/c      38GBP     1USD
hence my query is
1. Why for a particular asset amounts are getting reversed.
2. Why these amounts are not converted in parallel currencies when we change GL layout of parallel currency.
SAP OSS Note No. 0000733192 RABUCH00 and parallel currencies with value 0 has relevant documentation on this topic but it fails to explain why this happens in particular asset.Can you provide any explanation ? Thanks.

Hi Hui Bin Liu,
How did you solve this?
I have that same issue right now and can't figure how to solve it.

What are the required depreciation areas to post IFRS

Hi,
what are the required depreciation areas to post IFRS
Thanks And Regards.
Ramakrishna.K

Hi,
You should use the local rules for depreciation area 01 = local book and
set up your group rules in another depreciation area such as 30 where you can use different GAAP.
Regards
Sunil
Assign Points, if Useful

There are no depreciation areas to post to in fiscal year 2008

Hi,
Iam facing a problem during Depreciation run in t-code AFAB.
here are no depreciation areas to post
   There are no depreciation areas to post to in fiscal year 2008
    Message no. AA695
Diagnosis
    You have requested a depreciation posting run for fiscal year 2008.
    The program has determined that depreciation areas are still open for
    this fiscal year, but according to their configuration, these areas do
    not post depreciation.
Procedure
    Please check your entries.

Hi
Check the settings in OADB for the depreciation areas
Thank You,

How to 'force in' the Depreciation Area for an Asset after it was created

Hi,
When I created an new asset under a new asset class, I forgot to set-up the depreciation area for that class. Now after I have saved/created the asset, I get this error : No depreciation areas have been defined for asset 1012500000-0. How do I 'force-in' the depreciation area now after it has been setup.

try and read docu to tcode AFBN
(if your problem is in production, consult SAP-OSS)
A.

How to get the depreciation areas for an asset in particular period

Hi frndz,
how to get the depreciation areas for an asset in a particular period for writeup or manual depreciation method.
Thanks and regards.
Harisumanth.Ch

Try table ANLB, then read ANLC.
Regards.

Multiple Depreciation Areas for IFRS

Any one tell me about IFRS for Asset Accounting
What are the required Depreciation areas for IFRS
Regards,
Vani.

hi
You should use the local rules for depreciation area 01 = local book and
set up your group rules in another depreciation area such as 30 where you can use different GAAP & use relevant depreciation Key.
Assign points if useful,
regards
sunil

Required depreciation areas for IFRS

Hi,
What are the required depreciation areas for IFRS in asset accounting.
Regards,
Vani.

hi
You should use the local rules for depreciation area 01 = local book and
set up your group rules in another depreciation area such as 30 where you can use different GAAP & use relevant depreciation Key.
Assign points if useful,
regards
sunil

Purchase price variance line item - not to be posted in Parallel currency

Hi All,
Scenario:
Transaction currency - SGD
Local Currency - INR
Parallel Currency 1 (LC2) - Group currency - USD
Parallel Currency 2 (LC3) - Global Company currency - INR
Import PO - MIGO - MIRO
PO is raised in foreign currency.
Material master price control is maintained in 'S'.
While doing MIGO, I am getting following accounting entries:
Stock a/c Dr.
GR/IR a/c Cr.
Price variance* a/c Dr.
*The price varaince is because of difference in my material price as per material master and PO.
If I go and check in FBL3N, I can see all the line items in Transaction, Local currency and 2 Parallel currencies.
My query is, In SAP is it possible to avoid Price variance line item posting to Parallel currencies.
To my knowledge I know that it is not possible to avoid a single line to post it to Parallel currencies.
Thanks in advance.

This is the answer from OSS
Dear Customer,
the system works as designed.
When Material Ledger is activated, price differences are always
generated under the circumstances you have described. The reason is
that when material ledger is activated, price differences must not be
included into the stock changes value, otherwise the system would
not be able to calculate an actual price.
When Material Ledger is activated, the customizing setting
for handling price differences in the subcontracting process has no
effect.
Best regards,
Santiago Lorite
AGS Primary Support, Business Suite & Technology u2013 Logistics

Depreciation area for non leading ledger - Posting

Hi SAP Guru's.
I have one project for migration to new GL ledger with scenario 7.
I had finised configured in SAP system.
I create new depreciation area 41 is for nonleading ledger and need to post to GL ledger.
Now in depreciation area 01 , system had finished dreprciation posting run on period 05 already.
When I run AFAB , system not allow me to repeat post on period 01 , 02, 03 and 04.
Can anyone point me to the solution?
Thanks in advance for your great help.
Regards,
May.
Edited by: May Wu on Jun 17, 2010 7:22 AM

Thanks first.
ASKB was "Periodic Assets posting" but in our IMG the G/L posting indictor of prallel depreciation area was 3 (only post depreciation) and 6(only APC directly).
The setting was configured through the SAP wizard "Setup Areas for Paralle valuation".
Can you give further advice?

Change in start date of tax depreciation not for posting in mid of year

Hi Experts,
Tax depreciation area is not for posting. The fiscal year is from Jan to Dec. I want to calculate tax depreciation from May 2011 based on Net Book Value of tax depreciation as on 30.04.2011. But once I change the start date of tax depreciation in asset master to 01.05.2011, the system ignores the previous depreciation so I am not getting the NBV of tax depreciation of 30.04.2011.
Is any setting is required to get this. I can not do changes in posting rules since this tax depreciation is not for posting any thing.
The fiscal year 2010 is closed and NBV of tax depreciation as on 31.12.2010 of one asset is 80000, If I change the start date of tax depreciation from 1.1.2011 then system correcly take NBV of 31.12.2010 for further depreciation calculation. But if i change the start date of depreciation in between of year the system is calculating depreciation based on NBV of 31.12.2010 but ignores the tax depreciation from 1.1.2011 to 30.04.2011, which I previously run using AFAB.
Need your assistance to know is it feasible to do this.
Thanks and Regards,
Harshad

Hi Harshad
The behaviour of the system is very much correct, it is designed to behave that way...
One, you should not have changed the dep start date....
two, NBV in SAP is always taken to be NBV @ the start of the year....
The best wayout I can suggest here is, if you are on EhP4 and EA-FIN active
a. Change the Dep Key in the asset... You can maintain Time Dependant Dep Terms in asset master i.e. Dep Key X from Jan-Apr and Dep Key Y from MAy onwards
b. This will however, calculate dep based on NBV at the start of the year, but based on new useful life
c. Considering your eg: The system is posting more depreciation i.e. 5333 instead of 5155.... So, calculate this amount outside the system and post a Manual Write up ABZU inorder to reduce the Dep and increase the NBV
Even if you are on not on EhP4, you can follow the same approach as above.... i.e.
a. Change the Dep Key in asset master.... This will throw up new dep figure, on the basis of New Useful life and NBV at the start of the year
b. Post a write up from ABZU....
No need to do Asset to asset transfer in my opinion
Only diff between EhP4 and Non EhP4 is that the differential depreciation would be lesser if you are on EhP4... i.e. instead of 5333 now, system may throw up depreciation amount of 5666.. So, you may need to post write up of 5666-5155
br, Ajay M

Legacy data transfer for new depreciation area for already existing assets

Hi all,
I am doing legacy data transfer for New deprecaition area for already existing assets through AS92.
I like to give Ordinay depreciation posted amount for the current FY for these assets in AS92, but i find this field is not editable inAS92.
Please guide me to upload the Posted deprecaiton amount (for current FY) for these assets. I have assets both which are acquired in Last FY year and also this FY year.
Regards,
Srinivas

HI,
I have to migrate Posted dpereciation for new depreciation for nearly 3000 assets, In transaction 147, where i need give Acquituion value aslo, please note these are not new assets, these are prior year assets wiht opeing balances. If we use 147 system will take it is current acquition.
Please note my transter date is 28.02.2010, I have already run AFAB for this company cdoe Feb 2010 for other depreciation areas.
Now i am trying to update Opening APC Cost and Opening Accumulated deprecation for these assets and also posted depreciation for this FY.
Where in AS92, i am able to update Opeing APC Cost and Opeing Acc Dep succsfully for new dep area for already existingassets, bu Posted deprecation field is not editable.
Please guide me how to update posted deprecation for new deprecaition area in AS92 or some other way for already existing assets.
REgards,
Srinivas

Creation of depreciation area for posting of parallel currencies postings

Similar Messages

Maybe you are looking for