Creation of destination to SAP failed. Could not copy SAPOSS in SDCCN t-cod
Hi experts,
i am trying to generate rfc destination after entering SDCCN transaction when i click create destination to SAPNET R/3 Frontend getting an error as " Creation of destination to SAP failed. Could not copy SAPOSS"
can any one explain how to resolve it
Thanks&Regards
Keesara
See [Note 763561 - Service Data Control Center (SDCCN) - FAQ|https://service.sap.com/sap/support/notes/763561] -> Question 8.
Regards,
Nelis
Similar Messages
-
Syncing my 6th generation Ipod Classic, I get loads of the same message, "Itunes could not copy songs into ipod due to error -50". The syncing then completes with only 15gb used space and 143 gb space free.
What can I do to correct this error, please?See Corrupt iPod classic,
tt2 -
SAP TDMS - Could not copy A002 Relationships to the target system
Hi,
I had used HCM package for PD & PA from TDMS to transfer the Organizational Management data for couple of records. Everything went fine except that the A002 relationship records were not copied to the target system.
I had verified the target ranges that were defined and it has the Object Type "S" included in it.
But still the A002 relationship records were not copied.
Can anyone help me out with a solution on how to transfer the A002 Relationship records to the target system?.
I had defined the Object Types CP, P, A, AG, BP, C, EK, ET, G4, G7, GE, NA, O, Q, RY, S, T, UG and US. Is there anything wrong with my target areas definition?.
Thanks and Regards,
Anil.Hi,
have your checked if there is a lock for that relationship in table T77Tr in target system?
Regards,
Ana -
Hi All,
I am getting error while executing oDATA service from SAP Netweaver Gateway
Error details:
RFC call ended with "Communication Failure" exception (Function call failed; could not find the function
I am using SAP NG 740
Project is created in Gateway system using SEGW having Map to Datasource option used.
in SPRO manage alias, I had seleted Local App option. Screen attached
I had tried all troubleshooting like delete and add service and alias in "/IWFND_MAINT_SERVICE".
but still getting same error for all service.
Kindly advise.
Regards
VivekHello Vivek,
Service builder would have also generated code for RFC Exception handling to catch exceptions raised when communication fails between your GW and BE for some reasons.
Handling is done for 1. System Failure 2. Communication Failure & 3. Business Failure;
Put a BP in your DPC or DP_EXT class where exception code is written to check what exactly is has caused communication failure.
Check if that RFC is existing in that destination or not.
For your reference : Code would be something like this. Put BP here and check the problem.
* Error and exception handling
IF lv_subrc <> 0.
* Execute the RFC exception handling process
me->/iwbep/if_sb_dpc_comm_services~rfc_exception_handling(
EXPORTING
iv_subrc = lv_subrc
iv_exp_message_text = lv_exc_msg ).
ENDIF.
Go inside this method and check to get info on what has to be done to resolve issue.
Check carefully what has gone wrong and fix it accordingly.
No need of adding service & deleting as problem is not because of that.
Regards,
Ashwin -
Hi, so i have never had issues with my iphone before (3gs), i have up to date software, both on phone and itunes, and all of the sudden my phone will not update my music and itunes says copying the disk "jess sweeney" iphone failed. could not be read or written. I am not sure what to do, if anyone has any insight i would truly appreciate.
Read through this support article:
http://support.apple.com/kb/HT1207 -
There has never been a history of Adobe CS3 installation on the brand new MAC Pro I am using prior to installing Master Collection CS4, despite other posts claiming that chief cause of this issue is a previous CS3, Beta or trial installations of previous versions. I simply had a straightforward installation of CS4 and have had trouble since day 1.
I have uninstalled and reinstalled Master CS4 three times, two times with the action script cleaner for CS4. I tried changing Adobe Cache folder locations to alternative drives. I ran shift start many times to correct any inconsistencies and corrected for permissions using disk utilities repeatedly. All updates have been installed and I am still getting the same error when exporting my timeline to Media Encoder CS4, be it a large High Definition project or a small one consisting of few stills.
No matter what presets I chose, the job appears as one of the items in the render qeuee of Media Encoder CS4 and sits there with the status WAITING until i hit Start Queue. When I do, it still says WAITING under Status and at the bottom corner of the window it reads : Loading "project name.prproj" and after an average of about 6 minutes, a yellow caution sign appears. No render whatsoever takes place. When I click on the yellow caution sign, it reads a log of all errors in connection with each job, including the ones that have gone before it. Here is one:
Start of the Error Paste
- Source File:/users/myname/Library/Caches/TemporaryItems/test.prproj
- Output File:/ users/my name/Documetns/Adobe/Premiere Pro/4.0/Sequence 01.mov
- Preset used :NTSC DV
- Video:
- Audio:
- Bitrate:
0 Encoding Time: 00:33:01
Sat Mar 21 17:12:25 2009 : Encoding failed
Could not read from the source. Please check if it has moved or been deleted.
END OF ERROR Paste
Please any gurus out there know how to troubleshoot this damn thing on Mac, I really appreciate it. I have not yet encountered any posts of Mac owners with no previous CS3 installation having this issue. I am in the middle of 3 projects with tight deadlines and need your urgent help. THANK YOU!Hello There,
I resolved the issue through a simple process of elimination. So simple in fact I wonder how I missed it. Since there has been no history of prior CS3 installation on this machine and every conceivable trick was applied to resolve the problem (refer to my original post earlier in the thread) ending in frustration, the problem had to reside in a factor or series of factors that were only present in this machine. Of the two remaining causes different in compare to other machines, I had to look into the possibility of any hardware and/or software conflicts. After all, this very same installation works perfectly fine on my colleague's Apple Macbook Pro and several Windows machines.
It turns out that I had installed Pro Tools on this machine that comes with all kinds of optional plug-ins in the so called ignition pack. One of these optional plug-ins is called IZOTOPE (three varieties include Spectron, Trash and another one that escapes my mind). They were all lite version licenses that would automatically pop up on their own when you would start a program where they had been residing. One such program where an association existed was indeed the Premiere. An annoying dialogue box directing you to buy the full version when you would start the premiere would refuse to go away. Sometimes it would even start on its own culminating in a a permanent dialogue box.
The cause of the problem was right before my eyes and I had overlooked it. Once uninstalled using IZOTOPE clean uninstaller on step 4, the problem was resolved. Projects are now loading very fast into the AME and encoding begins in earnest. I have never had any issues ever since.
Long story short, if you have any plug-ins specially the ones that are loading upon the start of any program or the ones that reside inside the premiere or the ones that start on their own independently, they could be one of the highly probable causes of this error. I have seen other similar posts complaining of plug in folders inside premiere that needed to be moved to resolve the issue for instance the ones that needed to be moved to AE folders. If you are a plug-in admirer, I would suggest to look into them seriously.
On the side note, many combination and causes may lead to the same error. I am not claiming that this is the solution for everyone.
It must also be noted that I applied the trick of creating a shortcut of Premiere (and naming it exactly as such) and dropped it into the Adobe Dynamic LInk folder (even though this was suggested for windows)and have changed the adobe Cache locations to an alternative folder on a separate drive. I haven't been able to establish conclusively if the latter steps are also essential in fixing the error on MAC but I can confirm that since the latter steps were taken before the uninstalling of Izotope plug-ins and i still had issues, probably uninstalling those plug ins or finding a way to move them to a place where they don't interfere (if you absolutely need to keep them) is the one essential step that solved the problem.
Hope this helps. -
Connection test to database failed: could not connect to server
I restarted one of my HPOV NNMi 9.23 servers this morning and NNMi is no longer loading. I am seeing the following errors in the logs indicated:
/var/opt/OV/log/nnm/public/nmsdbmgr.log
04/06/2015 09:28:05 AM Connection test to database failed: could not connect to server: Connection refused
Is the server running on host "127.0.0.1" and accepting
TCP/IP connections on port 5432?
/var/opt/OV/log/nnm/public/postgres.log
2015-04-06 09:25:55.312 EDT: :8580:0LOG: could not translate host name "localhost", service "5432" to address: Name or service not known
2015-04-06 09:25:55.312 EDT: :8580:0WARNING: could not create listen socket for "localhost"
2015-04-06 09:25:55.312 EDT: :8580:0FATAL: could not create any TCP/IP sockets
I checked /etc/hosts and found the following entry:
#; Local
127.0.0.1 localhost
From the command line I can ping localhost with no issue. Not sure why NNMi is not starting at this point.
This question was solved.
View Solution.I also attempted to do a reset using nnmresetebdb.ovpl. I recieved the following:
Attempting to reset the embedded database...
Starting nmsdbmgr process for database reset...
nmsdbmgr process did not restart successfully - please try reset again.
When I run ovstart -c I receive the following:
Name PID State Last Message(s)
OVsPMD 29831 RUNNING -
pmd 29832 RUNNING Initialization complete.
nmsdbmgr - NOT_RUNNING - Exit(1)
ovjboss - UNSTARTABLE -
nnmaction - UNSTARTABLE -
ovspmd: Attempt to start HP OpenView services is complete.
I definitely need some help with this please!
Thanks! -
IMessage activation fails: could not sign in
iMessage activation fails: could not sign in. It waits for activation endlessly.
The issue started with contacts not being available for iMessage. I ended up not being able to sign in on both Mac and iPhone. Everything works fine on my iPad though.
Any ideas other than those posted around here? iMessage is becoming a real pain.If you get an error when trying to activate iMessage or FaceTime - Apple Support
-
Details Data in SAP BI could not be updated completely: see log
Hi ,
I need some help, while creating the campaign i am getting below error
Details Data in SAP BI could not be updated completely: see log
Diagnosis
A problem occurred as data was being saved in the BI system.
System Response
The data can not be completely saved in the BI system.
Procedure
For more information about the reasons for this, see Messages
I did the setting setting in SPRO to activate BI update and Multipal BW hierarchy
SPRO->CRM->Marketing->Marketing Planning and Campaign Management-> System landscape->"Activate BI update & BI multi Hier.
But in BI i am not getting mltipal hierarchies it coming under "CRMMKTROOT" during extraction not on the save of promotion.
Appreciate if you please help me on this issue.
Regards,
Raj MittalHi ,
I need some help, while creating the campaign i am getting below error
Details Data in SAP BI could not be updated completely: see log
Diagnosis
A problem occurred as data was being saved in the BI system.
System Response
The data can not be completely saved in the BI system.
Procedure
For more information about the reasons for this, see Messages
I did the setting setting in SPRO to activate BI update and Multipal BW hierarchy
SPRO->CRM->Marketing->Marketing Planning and Campaign Management-> System landscape->"Activate BI update & BI multi Hier.
But in BI i am not getting mltipal hierarchies it coming under "CRMMKTROOT" during extraction not on the save of promotion.
Appreciate if you please help me on this issue.
Regards,
Raj Mittal -
I am upgrading from Tiger to SL in a MCBPro with 2 gb ram and an intel chip and I get the following notice: Installation failed.... THE INSTALLER COULD NOT COPY THE NCESSARY SUPPORT FILES. Any help is appreciated...
Yes. I've found that works best. Especially if the drive is external, since external connections are typically slower, and Spotlight loves to eat up space going back and forth. Time Machine will eat up as much space as it can, and typically needs drives at least twice the size of the original hard drive that is being backed up, if being backed up in full. So unfortunately there is a lot of empty space that is needed for smooth operation.
-
Partition Failed -- Could not unmount disk
I partitioned my external hard drive into two parts. Now I want to change it back to one partition (500 gb).
I backed up all the data.
When I use disk utility and try to re-partition to create one partition from the two existing partitions, I get the error message:
Partition failed
Could not unmount disk.
What am I doing wrong??
THANKS.Sean M wrote:
I partitioned my external hard drive into two parts. Now I want to change it back to one partition (500 gb).
I backed up all the data.
When I use disk utility and try to re-partition to create one partition from the two existing partitions, I get the error message:
Partition failed
Could not unmount disk.
What are you booting from Sean ?
You could always startup with the external Off, runn DU then turn external ON.. and try. -
Had a crash and reinstalled everything. All is OK, except when I open Acrobat 9, I get the message "CoCreateInstance failed - Could not create 3D mouse device". Tried unchecking anything in Acrobat preferences having to do with 3D, and I don't currently have a 3D mouse device installed. Can't find any other reference in Google that includes both Acrobat and the contents of the message, part or all. Ran "repair acrobat installation" and rebooted, and that didn't help. Totally stumped!
use the cs cleaner.
first uninstall your cs5 programs (including acrobat) and uninstall adobe reader.
run the cleaner for reader: http://labs.adobe.com/downloads/acrobatcleaner.html
restart your computer.
then run the cs cleaner (http://www.adobe.com/support/contact/cscleanertool.html)
restart your computer
and finally reinstall your cs5 programs including acrobat (but not reader). -
Install Failed. Installer could not copy the necessary support files
I replaced the hard drive in my MacBook 13ac OS X" late 2009. I am trying to reinstall th OS and applications from th CDs that came with the computer. When I start the computer and try to install the OS, it starts to install, after about 2-3 minutes I get the following message. Install Failed. Mac OS X could not be installed on your computer. The Installer could not copy the necessary support files. Click restart to restart your computer and try installing again. I have done this several times with no luck. Is the CD missing something? Is there another way to do this?
Disconnect any attached hard drives.
Boot off the disk and try running Disk Utility Repair Disk and Repair Permissions. If that is successful, try to re-install. If that doesn't work boot off the disk and use Disk Utility to erase and reformat the drive as Mac OS Extended (Journaled). -
Error: "Verification Failed" Could not communicate with the server.
"Verification Failed" Could not communicate with the server.
I get this message every time I go to Icloud in setting menu.
also my contact are not in sync (empty on Ipad)
What does this message mean, and how do I solve it.
Everything else works (Autodesk Draw also works with Icloud and it works fine)
Mail ok
Downloading from appstore ok (also after password)
Please provide me with a solution due to this problem I can't get my contacts on my new ipad (at least that is what I think)Ok I got it working... the Ipad stores your password at different locations. So changing it once does not do the job. I thought the Ipad had the Single Sign On function for the apple password.
So make sure that you not only change your password in "the shop" but also in the setting menu (general) and icloud menu.
this helped for me, I had to let go the Single Sign On thought first.... -
I have a 20gb iPod that needs music from ITunes. On my new computer I am trying to sync but I get error message "could not copy to iPod because file could not be read or written. Attempting to copy to the disk failed. The disk could not be read from or written to." I have tried several times and have reset to factory settings.
Is the new PC running XP as well, Chalotte?
If so, I might start with the following document (your error message is a possible symptom of the issue too):
iTunes displays -50 error message when syncing iPod on Windows XP
Maybe you are looking for
-
Hi there, In QA, when I try to open the local view or global view of a query in BEx, I am getting the following error/message "The following objects were not found when accessing the server.." -Press Repair to correct the problem(incorrect parts of t
-
Alv using class (CL_GUI_ALV_TREE)
hi guys, i want a small example on the class CL_GUI_ALV_TREE_using alv......... its urgent so plx reply immediately............. Thanks with regards, Vishnu. R
-
Hi We have a problem in TPVS. Eventhough there is sufficient stock, delivery generations is not done, inspite giving message "delivery quantity is not fully available". Can any one help in this? Is this the problem with timing of the activities in R3
-
How to define endpoint for SessionBeans webservice in OC4J 10.1.3.1?
Hi Gurus, I am trying to find solution for defining endpoint in HTTP/SOAP webservice created from SessionBeans based on annotations JSR-181. My problem is that I have cluster of J2EE nodes where my webservice is deployed and each node has its own hos
-
Installing Lion fails on MacBook Air?
I just tried to install Lion and it seemed to going well but at the end said it could not install and referred my to apple support no recovery. My MacBook Air is running 10.6.8 and it is the earlier version with a 1.6 GHz Intel Core 2 Duo. It says it