Creation of Document type

Hi Please guide me about creation of document types for PR/PO.
If i want to create document type for the capital item as say ZCAP.
What are the item categories I should select. Also how does the item category affects the document type and further creation of PO/PR?
What is the significance of linkage PR.?
Also for creating the new document type we use the NB document type , why? Why do we create new one, cant we use the NB instead of creating new one?
If any body can explain with example that would be great.
Warm Regards,
Bhasker VB.

<b>Hi Please guide me about creation of document types for PR/PO.</b>
U can create new non standred document type for PR and Po
<b>If i want to create document type for the capital item as say ZCAP.
What are the item categories I should select. Also how does the item category affects the document type and further creation of PO/PR?</b>
U can create Doc type ZCAP bu coping std Doc type NB or u can creat as your own
Item categories help system to ask for a relevent data as if u give item category L which is for subcontracting then it will ask for supplied components
If u say U the it will change venter in to suppling plant and also change relevent things for stock transfer
<b>Also for creating the new document type we use the NB document type , why? Why do we create new one, cant we use the NB instead of creating new one?</b>
We can use NB document type for creating new one but ist not compalsory u can directely create your own. We copy so that, all the releating item catagories can be copied.
we create new one if u want different number range for asset proc and others.
or if u want to have subcontracting po diffrent form others. etc.
but there is no relation between Account assig cat and document type.
hope things r clear
reward accordingly

Similar Messages

  • Logic in Creation of Document Types

    Good Morning Folks-
    Is there documentation on when to create a new document type?  I am on an AR project and I have a client that has (in my opinion) duplicate document types.  For example, they have 2 document types for incoming payments and they are different because cash comes via lockbox(FLB2) and the other comes from a wire.  I have 4 document types to identify invoices and they are different because they come from the legacy system or created in SAP, etc.  They have a document type for credit memos and typically I have seen it is the same as an invoice but differentiated by posting key.  For credit memo, would be posting key 11.   
    I am trying to find some documentation that gives advice and warnings about this.  I have worked with 9 US A/R projects and at most had to be concerned with was only 4 document types.  I know what the definition of a document type is but they think it is to have them by source.  I see warning flags here.  I don't even know how to create clearing rules because it is so complex.  In addition, they are unable to balance from their legacy system to SAP. 
    Points promised

    Hi,
    This looks to be a Business Process question or as per the requirements of the client. You can find documentation on document types and how to configure, but not on how many document types to be set up. This purely depends upon Business practice adopted by the client.
    If a client has moved from a legacy system to SAP, the document types used in legacy system also influences this decision. There will be some reluctance to reduce or increase number of document types vis a vis legacy system.
    There should be too many or too less number of document types. Basically, document types will be helpful for reporting and analytical decision making.
    Thanks
    Murali.

  • Validation of document type in VA01

    23.12.2008
    Hi Gurus,
    We create a Sales Order (eg. ZXXX) through a Z-development. My requirement is that this particular document type should not be created using t.code VA01. Need a validation for VA01 in the first screen itself  ( where the document type, Sales Org, Dist Channel and Divn is entered) to restrict creation of document type ZXXX thru t.code VA01
    Regards

    Dear Sanjay,
    If your requirement is - To restrict Creation of Sales Document Type "ZXXX" with Transaction Code: VA01
    which, I have understood from your query:
    My requirement is that this particular document type should not be created using t.code VA01.
    ...the same could be achieved by changing/ modifying the Transaction Group in to Sales Document type.
    Path: T. Code: VOV8 --> Key-in Sales Doc. Type --> Go in to Detail-page --> Tab: Transaction Flow --> Field: Transaction Group
    If, we maintain entry as "0", the sale doc.will be created with VA01
    If, we maintain entry as "1", the sales doc. will be created with VA11.
    Note: If, you change Transaction Group to "1" for Standard Sales Doc. Type - OR; it will be created with VA11 and not with VA01.
    So, change the Transaction Group from "0" to "as reqd." for Sales Document Type "ZXXX" in VOV8
    Best Regards,
    Amit

  • I need output type NEU automaticaly for create purchase order document type

    Dear Experts,
    I need output type NEU automaticaly for create purchase order document type NB
    when transaction code MN04, I am doing the following:
    (1) I selected the third option Purchasing Output determination: Document type
    (2) I selected the output type NEU.
    (3) In condition records in document type , i have chosen NB.
    (4) In name its automatically coming as Purchase requisition
    Please suggest how Purchase Order NB will come

    Hi,
    Check & press F4, NB Purchase Order (for catagory F) will be there after entering PO output type NEU & then maintaion the condition record in MN04.
    Output type NEU automaticaly defaulted during purchase order creation with document type ,then just fine tune the output (message) type in following path:
    SPRO--->MM->Purchasing>Message>Output control->Message types> Define message type for Purchase Order----->Fine-Tuned Control: Purchase Order
    Now here select the check box corresponding to your output(message) type NEU to have print output automatically displayed & save.
    Now try to creating Purchase Order & you will have default message type NEU.
    Regards,
    Biju K

  • Wrong document type is processed form ME59N - Automatic PO creation Efected

    Dear Friends,
    Im facing one issue while the PO is created from Purchase requistion(ME59N).
    If the purchase requisition document type is - XTB while creation of PO from ME59N the document type is taking as UB
    the SPRO setting has been done for supplying plant and receving pant as - XTB but still getting the error as
    Doc. type XTBshould be used for suppl. plant XXXX and receiving plant XXXX.  06 - 674  ( Msg class and No)
    Could any one please help me on this.
    The manual PO creation(ME21N) is perfect .
    Regards
    Kumar.

    Hi Mauro,
    Thank you for the very helpful answer, i suggested my team to impliment the OSS note.
    Thanks for your help.
    One similar kind of issue i am facing, i implimented one enhancement in the BADI "ME_PROCESS_PO_CUST"  for checking the supplying plant.
    When i processd it through ME21N ( manulaly) it's taking the right plant, But when i processed it through ME59 ( Autoamtion of PO) the Enhancement is not triggered.
    ME59N is not supporting as there is no support pack ( OSS notes need to be implimented).
    Coluld you please provide any helpful answer for me
    Thanks for your support and Help.
    Regards
    Ravi.

  • Error M8-688 - Creation of several vendor line items is not possible for document type RN.

    Hello All,
    We are using the Net Invoice Posting with document type RN(Invoice- Net). We are generating different vendor line items in the accounting document based on the withholding tax codes involved in the invoice posting. When it comes to net invoice posting system is giving an error message M8-688 - Creation of vendor line items is not possible for document type RN. Is there is any way to create multiple vendor items with net invoice posting? Please suggest.
    Thanks,
    Chandu.

    I dont think that there is any way because it is a hardcoded error message.
          IF NOT t003-xnetb IS INITIAL.
            MESSAGE e688 WITH pi_rbkpv-blart.
          ENDIF.
    SAP is checking the customizing for net/gross posting per document type in table T003
    And if it is set up as net, then it is a hard error.

  • Immediate Transfer Order Creation not occuring for Sales Document Type

    Hello gurus,
    I have a situation where a transfer order is not being created immediately for a specific sales document type.
    Here is an example document flow of a desired scenario where the system is working:
    Sales document type:  ZOR
    >  Delivery type:  LF
    >  WMS transfer order
    The Item Category in this scenario is TAN.
    Here is an example of the document flow in the current scenario where the system is not working:
    Sales document type:  ZPRD
    > Delivery type:  LF
    The Item Category is also TAN in this scenario.  The only identifiable difference in these scenarios is the sales document type.  For the ZOR SaTY, a Transfer Order prints immediately once the delivery is created.  For the ZPRD SaTY, a Transfer Order needs to be manually created after delivery creation.
    Is there a configuration setting that is controlling this?  Any help would be greatly appreciated.

    Thank you very much for the link.  When I insert the WMTA output type in the delivery output header, the Transfer Order is automatically created.
    The problem I'm running into now is the configuration setting that controls this.  I thought I figured it out when going to this IMG path:
    SAP Customizing Implementation Guide  -->  Logistics Execution -->  Shipping -->  Basic Shipping Functions  -->  Output Control -->  Define Print Parameters Shipping
    When selecting the Delivery Note, the shipping point I was using was not configured in this location.  I added the shipping point into this transaction, saved, and created a new order & delivery.  However, the WMTA output type still was not automatically inserted into the delivery when saving.  Is there another location I should be looking to fix this so that when I enter an order with a particular Shipping Point, the WMTA output type automatically appears in the delivery?

  • PR creation - Particular Purchasing group assignment to Document type

    Hi
    We want particular Purchasing group should be selected w.r.t. Document type during PR creation.
    Is this possible thru SPRO??
    Thnx
    Nilesh

    Hi
    It is not possible per document type.
    The possibilities are -
    Can maintain in material master.
    Can use personal settings.
    warm regards
    sairam

  • CREATION OF NEW DOCUMENT TYPE

    Dear cons
    We want to create a new document type for pur. requisition.In this document type  account assignment  will be 'P'(PROJECT) . w.b.s should be only enter.
    so pl. give the details of filling data in the required field step by step. waiting for your early response.
    thanks
    nirupama

    Hi,
    In order to create a document type for a purchase requisition  use the path
    spro-materials management - purchasing--purchase requisitions --define  document type
    in that screen you select the document type you want to copy to create your document type and perform the action.
    if you want to change the screen/field selection for your document type select the field selection key (if you select the document type as NBB the field selection key will be NBB.,and go to the screen and change the field status.
    Hope this will be suffient for your requirement.
    Regards,
    Raghu.

  • Reg:Document Type creation in Manual bank Statement.

    HI all,
    What is the document type for Manual bank statement reconsolation.
    I created (BZ )for Manual bank statement reconsolation which fields i have to  select.
    regards
    JK

    Hi,
    Document types are created at client level. to restrict one kind transactions only and to identify the transactions pertaining to what.
    At the time of configuring BRS we have to specify the document type there u can specify what ever you want before it has to create. go to OBA7
    Hope this is clear, if yes assign points
    Regards,
    Sankar

  • F150 Dunning creation without increase Dunning level for document Type

    Hellò everybody,
    I have this request , How I can  do a dunning Letter  and for a specific Document type  , must have always a Dunnng level 1 . I mean do not increase the Dunning Level every time.
    For istance :
    Every week we make one dunning run. This run has to include all open invoices from ordinary deliveries (dunning level 1 to 3) and also  the open invoices for a specific Document type  (dunning level 1).   This Specific doc.type have not dunning level 2 or 3 .
    I have check on BTE and I have update  00001051 DUNNING: Read additional fields for MHND (BSID)  with this Abap code :
    IF I_BSID-BUKRS = 'KC01'.
            IF I_BSID-BLART = 'B2'.
          IF C_MHND-MAHNS IS NOT INITIAL.
            C_MHND-MAHNN = C_MHND-MAHNS.
          ENDIF.
        ENDIF.
      ENDIF.
    ENDFUNCTION.
    But nothing happen ...
    Who can help to me ?
    Thanks in advance for everythings.
    Anna Rosa

    Hi Vassy , thanks for your prompt answer ,  I explain better with example :
    first time  Dunning  :  Customer AABB
    Invoice 1  100   lev 1    Special Invoice
    Invoice 2  200   lev 1
    Invoice 3 300    lev 1
    The Customer do not pay nothing
    Second Time Dunning Customer AABB
    Invoice 1  100   lev 1    Special Invoice
    Invoice 2  200   lev 2
    Invoice 3 300    lev 2
    Thirt time Dunning Customer AABB
    Invoice 1  100   lev 1    Special Invoice
    Invoice 2  200   lev 3
    Invoice 3 300    lev 3
    I mean in the same Dunning letter for invoice 2 and 3 the level Dunning increase(as usual)  for Special Invoice number 1 the Dunning Level   still remain 1.
    I know that I can change Manually on open Item the Dunning level but I looking for if it's possible to this automatically.
    Thanks a lot.
    Cheers.
    Anna Rosa

  • Creation of new document types for document splitting rules

    Hi experts,
    We have copied from existing SA  document type to new document type.
    In standard SAP  SA  document type - define document splitting rule, we have select  "NO INHERITANCE OF ACCOUNT ASSINGNMENT", when posting the  GL document SA  document type without mapping partner profit center,system is control the derive the partner profit center.
      Our requirement is  copied from existing  SA  document type to create a new document type - we have created the new dusiness transaction variant and we have map the "classify document type to document splitting rule " and we have selet the "No inheritance of account assignment" while posting in FB01 GL document with out mapping partner profit center system is not control the " derive partner profit center".
    Could you please assist us as soon as possible
    Thanks ,
    Sreenivas
    Edited by: sapfico.srini12 on Jan 16, 2012 4:37 PM

    Hi,
    In order to create a document type for a purchase requisition  use the path
    spro-materials management - purchasing--purchase requisitions --define  document type
    in that screen you select the document type you want to copy to create your document type and perform the action.
    if you want to change the screen/field selection for your document type select the field selection key (if you select the document type as NBB the field selection key will be NBB.,and go to the screen and change the field status.
    Hope this will be suffient for your requirement.
    Regards,
    Raghu.

  • New Document Type Creation Problem

    Dear All,
    We create a New Document Type FR-Vendor Fright Charges through OBA7, i given no range also, when iam testing the through F-43 system showing the earror massage "Assign an accounting transaction variant to the document type specified"
    Where can i assign accounting transation Variant, we activate document splitting
    Pls help me
    Regards
    KSP

    Hi
    use tcode GSP_VZ3 and assign the Transaction and varient as per your requirement
    check the oss notes 773322, and 850724
    Regards,
    Sreehari

  • New Document Type Creation

    Hi,
    1)can we create new document type?
             for ex:   for goods receipt PO i want to create seperate document types like a)goods receipt PO- Stores b) goods receipt PO-Raw materials.
    2)if i create UDF's in marketing documnet-rows they are displaying in all marketing documents.can we set like, for example the UDF's created for purchase orders to be displayed only for purchase orders.
    Srinivas.

    Hi,
    You can define different numbering series for the Documents. Administration --> System Initialization --> Document Numbering. In this you can view Document names. For these documents you can define and maintain different numbering series. Double click the button left to Document names. New window opens. In that window you may view "Primary" as Name of Numbering Series. You can rename that name and if you want to add another name then Right click the mouse on #, Menu opens with dew options. In that Menu, select "Add Rows" to add new numbering series in this screen.
    You cannot define same number to the different numbering series. ie., If you Raw materials - Starts from 1, then your Stores should not start with 1. If you assign then Document Number Overlapping error may occur. Define different numbering series. Lets assume GRPO- Stores Starts with 1 and its Last number is 100000. then your GRPO-RM starts with 100001 and ends with xxxx.
    Like this you can define the series.
    or
    If you want both the numbering series should start from 1. Then you should go for Administration --> Setup --> Financials --> Sequence. In this sequence setup also you can view few Document names. For these documents you can assign Numbering series. Right click the button left to the Document name. It opens new window. In that window, enter the name of the Document numbering series and it's first number and last number, if required you can define Prefix or Suffix to the series. In this you can assign starting number as 1 for both the numbering series. Let's assume, GRPO - Stores starts with 1 and last number xxxxx, GRPO-RM starts with 1 and last number yyyyy.
    It works as an sub-numbering series concept. Your original numbering series will be different from sequence numbers in the document.
    You can use any one of the method to solve your problem.
    Raja.S

  • What are the sources system will pick the document type while creating invo

    hi
    I would like to know how system will pickup the doucment type while creating invoice in vf01.
    i have taken off the fields  f1, f2, from the document type. in billing sub tab.  so  The moment when am creating billing system automatically displaying F2 invoice doucment creation.  What are the sources for this.
    thanks & Regards
    Rack129

    Hi,
    Hope you have maintained u2018Delivery relevant billing type F2u2019 and u2018Order relevant billing type F1u2019 in the billing tab of the Sales document type in VOV8.
    If you create delivery related billing, the system will pick F2. This is controlled in Item category (VOV7). Billing relevance in Business data of Item category decides whether this is delivery related or order related. u2018Au2019 for delivery related billing; u2018Bu2019 for order related billing and so on.
    Item category is determined by this combination: Sales document type + Item cat group + usage + higher level item cat.
    Regards,
    K Bharathi

Maybe you are looking for

  • Wired and wireless computers on the same network?

    Here's the scenario: I've got Verizon FIOS which comes with a modem with four Ethernet ports. I have an Airport Extreme plugged into the modem. There are six macs in the house (three desktops and three laptops) and they can all connect wirelessly alt

  • BC4J: Problem deleting a row with clob field

    When I try to delete a row that contains a CLOB field. When I call the function removeCurrentRow in my View object I get this exception: JBO-25014: Another user has changed the row with primary key oracle.jbo.Key Could anyone tell me why I can't remo

  • HT204400 The AppleTV icon does not appear on the menu on my iMac.  I am running Yosemite and have purchased the latest AppleTv and upgraded the software.

    Trying to get my TV to mirror my iMac Screen.  Have Yosemite 10.10 , purchased the latest AppleTv and upgrade the software. Both are connected to my network through an Ethernet connection and Wi-Fi. Why cannot see the icon and connect to Apple TV? 

  • Using the JnlpServlet

    Hi, I want to use the jnlpServlet to deploy an application; but I also need dynamic arguments I mean, currently I send the arguments to a servlet (using POST), and I add those parameters to the jnlp Is there any way to do it using the jnlpServlet, so

  • CJ20N screen changes

    Hi, I have one question related to CJ20N screen modifications. Whenever user clicks on network beneath the WBS element, text box next to Activity number should be greyed out. That is the activity number text box should be greyed out (AFVGD-VORNR). Ho