Creation of ECC Quote automatically from CRM 7.0 Opportunity

Dear Experts,
I have a unique requuirement of my customer, they want to trigger ECC quote from Crm Opportunity automatically once the status is changed to Create Quote. I have already maintained the neccesssary settings to create ECc quote from Opportunity as a follow up document, but the customer wants it be done automatically. Please guide whether and how it is possible?
Thanks,
Ajai

Hi Ajai,
We can create this using Sales Profile & manually the Sales Guy can create ERP Quotation from CRM opportunity.
Actually I am going to create tge whole process to crate ERP Quotation from CRM Opportunity & not able to see the follow-up ERP Quotation Transactions under CRM Opportunity.
Can u pls help me if u have already created this ?
I got very good link for reference from SAP as below : but still for me its not showing the follow up docs..
http://help.sap.com/saphelp_crm60/helpdata/en/47/45839696581a41e10000000a1553f7/content.htm
Thanks
Umesh.

Similar Messages

WBS Elements not getting created in ECC Project System from CRM 7.0

Dear all,
We are trying to integrate SAP CRM 7.0 with SAP ECC-PS module. The objective is to bring in the marketing plan and elements data from the CRM system, and to create the corresponding WBS in project system. We have done most of the configuration as recommended by SAP in both the systems, and we see that the BDOCS are getting generated and sent to the ECC system. The following steps have been successfully completed:
1.       Set up the RFC connections between the two systems
2.       Selected the connection type as Middleware in CRM system.
3.       Installed the cProject Add on in CRM box.
4.       Created a project scenario (with project and network profiles) in the PS system and assigned the same in the CRM system.
5.       The Project Scenario in PS config has the same name as the Project Type in CRM config.
6.       Created and released the campaign ids being created in the CRM system.
As already mentioned, we can see that the BDOCS are coming to the ECC system and are getting stored in BDOC_TRACK table. However the issue is that the corresponding WBS elements are not getting generated in the ECC system. Is there anything that that we are missing in the ECC box which would trigger the WBS element creation?
Request you all to share your inputs which would be immensely beneficial for us in achieving this integration.
Thanks and Kind Regards,
Aditya Shrivastava

Hello Aditya,
We too are facing this issue.. if you have resolved the issue could you please let us know the solution ?
Some inputs related to our system,
We have upgrade from CRM 4.0 to CRM 7.0 SP07 and R/3 backend system is on 4.7 SP27, earlier we have completed the upgrade on sandbox without any issues which was upgrade to CRM 7.0 SP04 but with SP07 we are facing the problem of WBS Element not getting created in R/3.
Your help is highly appreciated.
Thanks & Regards,
Sumukh Kapoor.

SAP ECC Service notification from CRM Complaint

Hi,
As there are some links and document are available to create the quality notification in SAP ECC from the CRM complaint, using action profile for this some setting also needed in SAP ECC QM, but as in ECC we already have the service notification (IW51) which is working fine, is there any option to create the service notification in SAP ECC instead of quality notification.
Regards,
Zafar

Hi,
In the notification type, insted of quality notification just maintain the service/PM notification type system will create the notification in SAP ECC.
We also wanted some other details to be pass from CRM to ECC for that we have created a function module in SAP ECC which updates the notiifcation and then that function module need to be called in SAP CRM after the Create Notification FM in SAP CRM Action.
Regards,
Zafar

Purchase Requisition from CRM Service Order

Hello Everybody,
I am trying to create Purchase requisition from Service Order for Service(Material type DIEN) as well as Material (Material type HAWA). I have maintained all the necessary configuration in CRM as well as ECC, like in CRM, Logistic integration we maintained settings for Purchase requisition and in ECC we have maintained Document type and schema for the purchase requisition.
For information purpose, I have created Service Material in ECC as DIEN and item category group as LIES.
As soon as we save the Service Order in CRM with that item category, it should create Purchase requisition in ECC and the document flow in CRM should get activated.
Currently we are not able to create Purchase requisition in ECC.
Kindly let me know if theres any configuration settings missing in CRM as well as ECC or if note to be applied.
Best regards,
Anup Bansal

Hi Anup,
I am facing purchase requisition creation problem for service products from crm.
I have seen your query which was posted on same issue, so i thought i could get some help.
The problem here is when i am saving the service order i am getting the below message.
Enter a (default) purchasing group for material group SUB_MC (Notification E CRM_SRV_LOG_EXT_OLTP 002).
I have actually downloaded mat_dien materials from ecc to crm and for material purchase group is already assigned for one plant, but still not able to recognise.
Please help me out.
Thanks in advance.

Movement of order from CRM to R/3

Hi,
We know that after creating the order in CRM it moves to R/3 and there the delivery takes place. Now can you tell me where to do the necessary config so that after creation,the order will move from CRM to R/3? Similarly I want to know the config for billing where it is mentioned that after completion of delivery the billing will be done in CRM and not in R/3.
Another thing is what is work flow and what is the meaning of workflow inbox?
Thanks and regards,
Dipankar Nag

Hi Dipanker,
To get the data flowing from CRM to R/3 you will have to configure your middlware.
Refer the following link:
http://help.sap.com/saphelp_crm40/helpdata/en/c7/95fc381478ab6fe10000000a11402f/frameset.htm
Workflow is automation of the Business Processes to be handled by different people in the organisation.
Refer the following links for Workflow:
http://www.sap-press.com/product.cfm?account=&product=H950
/people/ginger.gatling/blog/2005/12/01/link-workflow-business-objects-to-your-collaboration-tasks
http://help.sap.com/saphelp_erp2005/helpdata/en/fb/135962457311d189440000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/c5/e4a930453d11d189430000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
http://help.sap.com/saphelp_bw33/helpdata/en/92/bc26a6ec2b11d2b4b5006094b9ea0d/content.htm
http://help.sap.com/saphelp_bw31/helpdata/en/8d/25f94b454311d189430000e829fbbd/content.htm
http://www.sap-img.com/workflow/sap-workflow.htm
http://www.sapgenie.com/workflow/index.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
Workflow inbox is your business workplace (SAP Inbox) for where you can view or execute workitems assigned to you.
<b>Reward points if it helps.</b>
How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left.

POD flag set up automatically after BP replicated from CRM to ECC

Hi Experts,
we are working on CRM 5.0 and ECC 6 as backend system.
*Requirement :*We will create a BP record in CRM and the same will be replicated to ECC.For the BPs which is replicated to ECC from CRM , the "Relevant for POD "(Proof of Delivery) flag should set up automatically.
Note: we have done the following settings
1) Created a Reference Customer in ECC in which we have set up a flag "Relevant for POD ".
2) Initial download Reference BP from ECC to CRM by going to TCode:CRMC_BUPA_CONSUM in CRM.
3) Maintained relevant Sales Areas for the BP.
Question:
In CRM we dont have field called "Relevant for POD ".How can we populate the field "Relevant for POD " for the Business Partner that is Created in CRM and replicated to ECC?
For any helpful answer points will be awarded.
Thanks in advance,
-Rahul.
Edited by: rahul biji on Feb 12, 2008 6:21 PM

Hi,
did you find a solution to make this work ? We have the same problem with other fields that are only available in R/3. We are thinking of adding a FM to fill these fields in table COM_BUPA_CALL_FU. Did you find another way ?
Best regards
Annette

How can I Force/relaunch BP replication from CRM to ECC

Hi everybody,
We had some replication problem with sold-to-party BPs when creating them in CRM (Tr Code BP). The CRM002 id was not implemented in most cases. A job was planned to relaunch the Bdocs automatically every hour. It seemed to be ok for a moment.
However we still have some sold-to-party BPs that are not replicated at all in ECC (Master Data and sales data). The usual procedure we set to trigger the replication is checking a case in BP Tr. but when I uncheck the case and check it again, the replication doesnt happen.
Is there a way to force manually the replication of a sold to party BP from CRM to ECC?
Second question in replication subject : We also have partial replication in ECC. For example the Tax classification partially replicates. It's like if the replication process in crashing on the way and the result is no CRM002 id back in the BP master data in CRM. Do you have any idea of where it's coming from?
Is there a Transaction like SMW01 (CRM) in ECC in order to trace replication problems of processes?
Many Thanks.
Laurent

Hi,
Firstly , please check if you have any filters in for adapter object customer_main in trx. R3AC1 (which prevants data replication)
Next, check if your inbound (SMQR) or outbound queues (SMQS) of CRM are de-registered.
You can use trnx.
CRMM_BUPA_SEND
to manually replication a BP to the ECC system.
No.. there is no monitor in ECC like the Bdoc monitor (SMW01) in CRM.
Hope this helps. Reward if helpful!
Thanks,
Sudipta.

What are the steps to send sales order custom field from CRM to ECC

Hi Xperts,
We have created a custom field in sales order [ VBAK] and successfully replicate its value from ECC to CRM. But while doing the enhancement to replicate the field value from CRM to ECC [ When the SO is created in CRM ] we are not able to do so.
We used a FM in CRM0_300, but while replicating the SO from CRM to R/3 it is not getting called.
Please help us by providing the steps to do the full enhancement to replicate the custom field of SO from CRM to ECC.
Thanks in Advance.

Hi Anjaneyulu,
We are faced with a similar situation as you.
Here is our scenario with the steps that we performed so far:
1. We have added a few custom fields in CRM 7.0 (Ehp1) using AET.
The BDoc BUS_TRANS_MSG has been automatically extended with these custom fields.
2. On ECC side also, same custom fields have been added to VBAK and VBAP, using APPEND STRUCTURE. Fields were added to ADDITIONAL DATA TAB B in VA01 / VA02 transactions.
3. Extended BAPI structures BAPISDITM and BAPISDITMX in both CRM and R/3 Side.
4. As mentioned in the note 1053817, we have implemented BADI CRM_DATAEXCHG_BADI -> Method CRM_DATAEXCH_AFTER_BAPI_FILL in CRM (mapped fields from BDOC to BAPI structures)
5. In the above note, for R/3 BAPI to R/3 API they have given to implement user exit USEREXIT_MOVE_FIELD_TO_VBAP which we found in MV45AFZZ. But in this we are unable to find BAPI Structure to map.
Our issue is, when a sales order is created in CRM, it is getting replicated on ECC. But, only standard fields are getting replicated. The custom fields that we have added are remaining empty on ECC side.
In CRM --> txn SMW01, we can see that the BDOC is populated with custom fields also.
Could you let us know if your issue is solved completely. Are you able to see the value of custom field, in ECC? Did you use AET to add fields in CRM.
Could you please give us the steps that you have done.

Business Partner not replicating automatically from ISU system to CRM

Hi All,
        We are working on transferring BP from ERP to CRM. Following are the main ways that we are using for the same :
1) We are creating reference customer with role Sold-to-party in transaction VD03 using internal no range.
2) Then we are creating ISU BP using the internal same number range and giving the above created customer no as reference customer and finally saving it
3) We have maintained the settings in PIDE from R/3 to CRM as :
Sold-to-party     B   ZD02 External Checked
DEBI                B   ZD02 External Checked
We are using BUPA_MAIN as Bdoc.
I get the follwing Bdocs in CRM system :
1) In SMW01 in CRM I am getting the reference customer created in Step 1 as automatically replicated to CRM and in Success state
2) Also I get the Bdoc in Error State for ISU BP created in Step 2. Then if I try to pull the BP it comes in Success state.
My problem is that the BP Bdoc should automatically come in Success state in CRM.
Please help me solve this problem.

Hi,
We also have the same approach of BP, CA and contract creation. These data, after creation in ISU are replicated to CRM. We had an issue while replicating the Contract. The contracts were not getting replicated if the contracts donu2019t have the Service Provider and external service provider information. We donu2019t require to capture this information at contract. We are now forced to capture have this information at contract level just for the replication purpose. Is it mandatory to have the service provider information in contract for the replication of contract to CRM.
Regards,
Murali

Sales Orders Not Replicating from CRM 2007 to ECC 6.0

I have been able to successfully replicate my Customers from ECC to CRM. When attempting to replicate a Sales Order from CRM into ECC, the BDoc shows as "Confirmed (fully processed)" in SMW01. When I look at the list of receivers, it shows my ECC system, with a state of "Processed". However, when I look at the Error Segments on the BDoc, I have two events:
1. No Upload into R/3
2. R/3 Adapter is Called
Any thoughts on what I am missing?
Thanks!

MCG,
Thanks for the quick reply. Yes, I have a publication of "All Business Transactions (MESG)" with a subscription of my ECC system. The BDocs never make it into the Outbound queue. I purposely stopped the outbound queue to see if it would show-up ... it never comes in.
Thanks!

Mass sales orders from CRM to ECC

Hi,
We have a requirement to mass upload sales orders from CRM system ECC system. I could not able to find any option to push sales orders in bulk from CRM to ECC.
Could you please let me know if you know any kind of solution for this kind of scenario.
Thanks in advance!
Regards,
Kumar B.

Hi Maggie,
Thanks a lot for your response. But I could not able find CRMD_MASS_UPDATE in CRM system as well as in ECC.
Could you please let me know how to try this other please let me know the program or tcode.
Regards,
Kumar B

How to update a Z-table in ECC for the data coming from CRM

Hi Experts,
I need to store the industry code and description from customer master from CRM into a Z-table in ECC.I have checked the BDOC segments is already there in CRM.This Z-table has to be updated each time when the user save the customer master.This Z-table will be non editable in ECC.
Thanks in advance.
Regards,
Sumit

Hello,
Do you synchronize CRM business partner with ECC business partner?
Because in standard industry code & description are replicated between both objects... so I don't really understand what you try to do.
Anyway, if you would like to save some information in a Z table each time a business partner gets replicated into ECC, you can register a function module in table COM_BUPA_CALL_FU on ECC to do the job.
Kind regards,
Nicolas Busson.

Error during Replication of Service Contracts from CRM to ECC

Hi,
I'm encountering a problem when replicating a Service Contract from CRM (I'm using SAP CRM 2007) to ECC.
I insert a first Item which is not relevant for pricing (let say, product 123)
I Insert a second Item relevant for pricing, with reference to the previous one (let say, product 456)
I release the Items and I save the contract
When I try to go in edit mode in the Contract, an error appears:
An error has occured in the system DE1CLNT200 while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.
Transmission log
u2022     SALES_HEADER_IN has been processed successfully (Notification S V4 233)
u2022     Material 0 does not exist in plant ZX01 / country CH (Notification E V1 391)
u2022     Error in SALES_ITEM_IN 000101 (Notification E V4 248)
u2022     Sales document was not changed (Notification E V4 219)
It seems that the program does not recognize the product (the error message says "Material 0", not "Material 456") ...
Any idea?
Thanks in advance,
Andrea

Should it be a problem related to the leading zeros?

Creation of an ERP Sales Order or ERP Quotation from CRM Opportunity

Hello Experts,
The scenario is as follows:
I have done the cross-system copy control of transaction types and item categories to enable ERP Quotation and ERP Sales Order creation from CRM Opportunity. However, after saving the CRM Opportunity, when I click on the follow-up transaction and select ERP Quotation or ERP Sales Order from the list, the screen doesnt change and instead I got the following error:
"Diagnosis
An exception occurred during request processing. This was handled centrally. It changed the program flow and the result of the request probably contains errors.
Procedure
Contact your system administrator.
Procedure for System Administration
Activate checkpoint group BSP_WD_EXCEPTION_DISPLAY. To do this, use transaction SAAB. If the error recurs, further details are displayed.
Exception Details
CX_BSP_WD_INCORRECT_IMPLEMENT - Define component usage 'CUERPFollowUp'
Method: CL_BSP_WD_REPOSITORY=>GET_CMP_USAGE_DEF
Source Text Row: 20"
Experts, kindly help me understand what the error is about and pointers to resolve it.
Points would be awarded.
Thanks,
VSK.
Edited by: venkatskumar on Feb 21, 2011 8:37 PM

Hello Robert,
Thanks for the quick reply.
I have followed your instructions and I wanted to confirm one more thing with you.
When I enter the component usage it gave a pop-up which said:
"Enter either a reference or an interface view"
Any information on what should be entered in the reference or the interface view? What should be the used component name and interface view name in this scenario?
Kindly confirm.
Points awarded
VSK.
Edited by: venkatskumar on Feb 22, 2011 12:37 PM

Creation of R/3 order in CRM from the opportunity created in CRM ?

Hello Experts,
I would like to create a ERP sales order from CRM system, by follow up from opportunity.
1) I defined cross system copying control
How to define a profile for allowed ERP sales transactions ?
How to assign this profile to the user role ?
Kindly help me out...
Regards,
A.Lakshith Rao

Hi,
1606107 - Creation of follow up ERP quotations from opportunities not working
Entry of ERP Sales Transactions in SAP CRM
http://help.sap.com/saphelp_crm70/helpdata/EN/47/463fc2b61c1a41e10000000a1553f7/frameset.htm
Denis

Creation of ECC Quote automatically from CRM 7.0 Opportunity

Similar Messages

Maybe you are looking for