Creation of Equipment master throught Emigall
Hi Fritz,
Good Day!
I need to create a Emigall object for Equipment Master, which we can't
handle in LSMW because of the volume of data, I am using the same object as
used for Device of ISU.
The object name is EQUIPMENT in company ZISU. I have used those fileds only
which are required to create a equipmetn master in STW. While uploading the
data I am getting an error " Enter a valid device category" which is a
device category of ISU.
Can we do this or do we need to create some other customization in this case
Thanks for your support Fritz.
Regards,
Robert.
Robert,
I did some research. Please confirm you are referring to the data as copied below from the documentation.
Kind regards,
Fritz
Definition
Partners (business partners) are internal and/or external organizational units. For example, internal partners can be logistics and sales departments that perform services. External partners can be customers as service recipients and vendors as supporting service providers. A partner can be a natural or a legal entity. You can use partners in CS- and PM processing.
The following partner types are delivered with the Standard System:
Customer
Contact person
Vendor
User
Personnel number
Organizational unit
Position
Partner Function
You define partner functions in Customizing for Plant Maintenance and Customer Service. They are freely definable and always refer to a partner type. Standard functions exist (for example, goods recipient) and you can also define your own functions.
Partner Determination Procedure
The partner determination procedure is a grouping of partner functions. It specifies which partner functions are permitted or must always be specified for a particular business transaction (for example, for the processing of a service or maintenance order). In Customizing you define the partner determination procedure and assign partner functions to it. If functions are assigned to the partner determination procedure, you can assign the partner determination procedure to an object (for example, to a notification type).
Integration
You can assign partners to the following objects: Functional location and equipment
Similar Messages
-
Automatic Creation of Equipment Master
Hi Experts
I have gone through lot of discussion available on forum but still Asset Equipment link is not working.
I would like to create Equipment when I create Asset.
I have done below settings.
1) Asset Accounting --> Master Data --> Automatic Creation of Equipment Master -> Specify Conditions for Synchronization of Master Data
here i have assigned equipment category and object type and selected direct synchronization after saving in Create Equipment
2) Asset Accounting --> Master Data --> Automatic Creation of Equipment Master -> Assign Master Data Fields of Assets and Equipment
here i have assigned fields here.
When I create asset and save its only creating assets and even not getting error message . I have also checked screen layout and equipment is optional and not seems to be a problem.
To see whether synchronization functionality works I have done settings from Equipment to Asset creation and it's working but that's not the requirement.
I have changed the settings back to the 1) above to create equipment when asset is being created and it's not working.
So to summaries when I create Asset - No equipment is created but if i change settings other way then asset is getting created from equipment.
My question is what settings are missing to create Equipment when I create Assets?
Is there any settings required from equipment side? any specific requirement on equipment category and object type?
Thank you.Hi,
Simple,
1. Go to AOLK and check which tab layout is assigned to your asset class, to transaction group 'Others'.
2. Go to AOLA select layout you found out at 1st step, then double click on 'Tab Page Titles'.
3. Select tab page Allocations and click on position group on tab pages.
4. Click on new entries and insert 'S0013', save.
after doing this you will be able to find 'equipment' box under allocation.
and regarding asset synchronization..
Asset Accounting --> Master Data --> Automatic Creation of Equipment Master -> Specify Conditions for Synchronization of Master Data
In this step, under the box 'Edit Asset Master Record' mention,
Create Equipment 2 Direct Synchronization after saving
Change Equipment 2 Direct Synchronization after saving
Make sure you do not have any other field 'required' in equipment creation and not assigned to asset field.
After doing this you should be able to get equipment created automatically..
Regards,
Sayujya -
FI-AA and the Automatic Creation of Equipment Master Records
Our client is currently on SAP R/3 4.7E and per SAP Notes 176056, 370884, 361520, releases above 4.6B should be able to automatically create an equipment resord master record from within FI-AA. Configuration shows that undaer FI-AA Master Data the integration should be possible, but we have tested and cannot get it to work. No equipment record is ever created.
Has anyone been successful in performing this function?
What are we missing?
Thank You.
RuthieHi,
Simple,
1. Go to AOLK and check which tab layout is assigned to your asset class, to transaction group 'Others'.
2. Go to AOLA select layout you found out at 1st step, then double click on 'Tab Page Titles'.
3. Select tab page Allocations and click on position group on tab pages.
4. Click on new entries and insert 'S0013', save.
after doing this you will be able to find 'equipment' box under allocation.
and regarding asset synchronization..
Asset Accounting --> Master Data --> Automatic Creation of Equipment Master -> Specify Conditions for Synchronization of Master Data
In this step, under the box 'Edit Asset Master Record' mention,
Create Equipment 2 Direct Synchronization after saving
Change Equipment 2 Direct Synchronization after saving
Make sure you do not have any other field 'required' in equipment creation and not assigned to asset field.
After doing this you should be able to get equipment created automatically..
Regards,
Sayujya -
Bapi for creation of equipment master
hi friends ,
I have to made a BDC program for creation of equipment master .
for that I am using bapi i.e. ' BAPI_EQUI_CREATE '.
I had matched the fields of transaction IE01 but in the additinal data part i could not able to map 'Partner' fields .
pls some body can guide what should i do for it.Hi Das,
If u r going to create equipment no against this Bapi BAPI_EQUI_CREATE"
then u need to pass material no, Equipment type, Serial No. there is no need to give partner no .
If its good, then plz give point. -
Creation of equipment master automatically with grn.
H gurus
Is there any way to creat automatically equipment master while doing GRN.?
This is cliants requirement.
Regards,hi
you can create equipment master record automatically provided you have assigned serial no profile to the material master and the serialization procedure which allows the equipment master to be created automatically
regards
thyagarajan -
BAPI for PR Creation and Equipment master updation
Hi Gurus ,
Please provide me the function module (BAPI) for the following.
1. Create Purchase Requisition
2. Update/Change Equipment master(Iq02)
Thanks
TausifHi Tausifur,
You can goto Tcode BAPI and find all the relevant BAPIs that you want. This will help you in the future.
Cheers
Keshav -
Asset Auto creation of Equipment Master - Synchronization
Hello Experts
If I decide to use Workflow "then system does not synchronize the master data, instead it triggers a workflow".
What settings needs to be done for workflow to be work other than available in FI-AA? Is this Programming?
Thanks in advanceClosing and opening in Fianacial Forum
-
Restrict Equipment Master (with serial numbers) creation
Hello All,
I am faced with an issue where the client will be using Serial Numbers for 2 sets of materials. I have assigned a Serial Number profile to these materials in Material Master.
I am able to create equipment master data for these materials with serial numbers without any issue.
However, I am also able to create equipment master data (with serial numbers) for materials to which I have not assigned a Serial Number profile.
Is there a way to restrict the creation of equipment master data (with serial numbers) to only those material that have a Serial Number profile assigned in material master data...?
Thanks
JensiThanks for the reply Amuthan.
Unlike what you wrote in the reply, the system does allow me to create/save a equipment number for those serial numbers that I assign to materials that do not have a serial number profile.
Is there any validation, any check or something of that sort that I can activate so that the system will prevent assignment of serial numbers (and in turn creation of equipment master data) for those materials which do not have a serial number profile assigned in the material master data?
Thanks
Jensi -
Creation of equipment using asset
Dear Experts,
I am very new to SAP PM. I have one query regarding the creation of equipment master automatically by asset master scenario is as below..
I have created one asset master in which asset quantities are 10 in one asset master, I have synchronize asset master with equipment master in FI configuration. I am getting only one equipment master for that asset master but I want maintain above mentioned 10 asset separately so I want 10 seperate equipment for same.. Please tell me how can do this
Thanx .
Regards,
ABC PMThanx Yawar,
I have activated that setting & I am getting one equipment for one asset master. but in my scenario in one asset master there are 10 quantities of asset & to maintained them separately I want to make 10 seperate equipment master.. so hw can I do that???
Regards,
Parag. -
Problem in creating equipment master using FM /ISDFPS/ETUPS_EQUI_CREATE
hi all,
i am trying to create an equipment master using the FM mentioned above .. after the FM gets executed there is no status/error/information message.. i have given all the values to the FM which we normally give to IE01 transaction for creation of equipment master...
please advice on this ...
thanks a ton.....Hi Shiva
Did you got to know how to use this FM, I got a requirement where I need to build a interface to update and create equipments. I also tried using this but got simillar problem as you mentioned. Please let me know if you found any alternative for this?
Thanks
Harkamal -
Equipment master creation with classification
Hi,
In plant maintenance how can create the equipement master creation with classification.
Ram RathodeHI Ram,
In SAP system,you only have to input the Equipment details like Mnaufacturer,Warranty,WBS element etc.
Now which fields are mandatory depends on business.
In classification,you have to choose Equipment Classification Type as 002 and then Choose the Class,for example BLOWER.
Once you choose the Object you will have many dependent fields to enter value into,just do that and save.
Please revert in case of any query.
Thanks,
Ravi -
VMS and Equipment Master creation for Warranty
Hi, Can anyone tell me what is the recommended method for assigning warranties for vechicles when using VMS. Is the Equipment master or General Object number and what is the difference between the two ?
Hi
I have one question according warranty in VMS:
what is the difference between warranty assigned to vehicle and the one assigned to Equipment?
I am comparing solution and see some missing parts in both cases
My summary is like that:
Solution 1 - Warranty is assigned to Vehicle WITHOUT equipment
+ WTY recognizes VIN as valid warranty object
+ there is an action in VMS to assign warranty master (vendor and customer one)
+ in VELO you can see claim history (in tab Warranty)
problems
-there is no template for measurements points (as in equipment)
Solution 2 Warranty assigned to Equipment - equ created in VELO linked to vehicle
+ standard actions in VELO to create equipment,
+ standard solution to define template for equipment with measurement points
+warranty assignment is also as one action in velo
Problems
-tab with warranty history in VELO does not get claims related to EQU
-in WTY equipment must be entered u2013 better would be with VIN
-measurement points and warranty in velo are not visible (button in vehicle details)
I will be glad for your feedback
BR
Mimo -
Automatic creation of equipment after goods receipt
Hi SAP experts,
I need help to find where in SPRO do I turn off/on the automatic creation of equipment once a GR is done for serialised equipment.
Also, is it a PM function or MM?
Thank you
Emanuelhi
SPRO>PM>Master data in PM >Technical objects->Define Serial No Profile -->here goto ur serializing no profile --> goto serializing procedure and chek in MMSL procedure and change the EqR value to 1 .
regards
pushpa -
Interface between Legacy and SAP for Equipment Master
Hello
I got a requirement where I need to develop a interface between legacy system and R/3 system for Equipment Master Data update in R/3. I am thinking of getting a Idoc file from Legacy and then update the changes or any new creation of Equipments in R/3. I found a standard BAPI for this BAPI_EQUIPMENT_CREATE/CHANGE. This BAPI use a strcture BAPI_ITOB for data record of IDoc. But I got more data from legacy except what we have in BAPI_ITOB. I got Partner Data, Classification data also for Equipments. I am thinking of copying the BAPI to a Z function module and modify the Idoc structure , message type and all to capture all the data and then do a update in same way as standard transaction IE01(Equipment Create) is doing in Batch Input. Do you think if there is any better way of doing this? I am not used to transaction BAPI . just wondering if we Can use that in someway to include our modification?
Thanks
Harkamal20,000 is on quite higher side for IDOC.
IBIP help doc says it needs 2 Kbyte for each record, i.e. 40 Mb for 20,000 rec. that should be ok. Since it has structures for Partner & classification data , I don't think u need to modify the BAPI.
Transaction IE01 - Create equipment
Transaction IE02 - Change equipment
Structure - IBIPEQUI Equipment record
|-> IBIPNSTA New status profile if necessary
|->> IBIPSTAT User status records
|->> IBIPDOCU Doc. from Doc. management system
|->> IBIPPART Partner details (comment below)
|-->> IBIPTEXT (see comment below)
for long text: TEXT_MARK = " " empty
for internal comment: TEXT_MARK = "1"
|-->> IBIPCLAS Classification record (eqpmt class)
|-->> IBIPFEAT Classification characteristics,
ie. features for the class
|-->> IBIPBDCD see below (from screen 102) -
WORK CENTRE IN EQUIPMENT MASTER DATA
Hello All,
In IE01 tcode > creation of equipment , pls tell me what is the relevance of work centre in location tab ??
Thanks,
SunnyHi
Work Center
Definition:Operations are carried out at a work center. In the R/3 System work centers are business objects that can represent the following real work centers, for example:
Machines, machine groups
Production lines
Assembly work centers
Employees, groups of employees
Use
Together with bills of material and routings, work centers belong to the most important master data in the R/3 production planning and control system. Work centers are used in task list operations and work orders. Task lists are for example routings, maintenance task lists, inspection plans and standard networks. Work orders are created for production, quality assurance, plant maintenance and for the Project System as networks.
Data in work centers is used for
Scheduling
Operating times and formulas are entered in the work center, so that the duration of an operation can be calculated.
Costing
Formulas are entered in the work center, so that the costs of an operation can be calculated. A work center is also assigned to a cost center.
Capacity planning
The available capacity and formulas for calculating capacity requirements are entered in the work center.
Simplifying operation maintenance
Various default values for operations can be entered in the work center.
Look at CR01 ,CR02,CR03 Transaction
table : CRHD Table
<b>Reward points for useful Answers</b>
Regards
Anji
Maybe you are looking for
-
My mac book pro does not connect but shows an error message with a question mark on the screen.I took it to a retailer that said it was not reconizing the hard drive.He said i needed a new hard drive but it may be something else as well but he was su
-
Broadband that is not working - lack of help from ...
Hi, I have made a great mistake of moving my Internet provider form Virgin to BT. Since having my new hub I have not had a good connection. This first stated on 17th June when my service should have started and is still ongoing. The BT people you spe
-
An MD5 implementation for my final project (look inside)
Hey, I'll just cut to the chase: I'm making an MD5 implementation, from the pseudo-code on the wikipedia page, which is located here. This is what I have so far: import java.util.Random; public class MD { static int i = 0; static int f,g; public stat
-
In the slide show timeline, how do I select a photo to crop?
In the slide show timeline, how do I select a photo to crop? Sometimes it lets me do it and sometimes I can't select the photo to do it. I'm not sure why the difference.
-
My project crashes Final Cut Pro on multiple machines
I'm just getting ready to wrap up a project and I now can not render or export anything without the spinning beach ball and then either a "force quit" or it crashes for me. I'm running FCP 6.0.4 on a DVCPro HD 1080i60 Project and Sequence. The entire