Creation of Field Selection Group for MM

Dear Expert,
How to create field selection Group in Material Master Tcode - OMSR
Regards
Alok

Hi,
T- code OMSR is used to assign Fields to Field Selection Group 
Define whether a field is hidden or displayed, or whether an entry is mandatory or optional in material master maintenance by assigning the field to a field selection group in OMSR. You can assign a field to one field selection group only.
Each field selection group has a number between 1 and 240.
The values of the field selection groups have been preassigned as follows:
001-110 Material master for industry
111-120 Reserved for customers (except where the values are already in use)
121-150 Material master for industry
151-210 Material master for retail 211-240 Reserved for customers
OMS9 is used to create and maintain field references 
Create field selection group in OMSR by clicking new entries-->give field, check the propose field cont box and give maint.status.
Edited by: Padmasri G on Aug 17, 2011 12:03 PM

Similar Messages

  • Change Field selection group for Movt type 701

    Hi experts,
    I want to change Field Selection group for movt type 701.  Right now " Business Area " & " Cost Centre " fields are suppressed.  I want to change it to required entry.
    Please guide me over this
    Regards,
    Rajneesh Gulati

    the note explaines it:
    In Customizing an account assignment can be made for every inventory
    adjustment account. To do this the inventory adjustment account must
    first be defined as a cost element (Transaction KA01 / KA06):
    Accounting -> Controlling -> Cost centers -> Master data -> Cost element
    -> Create primary / secondary. Then an account assignment can be made
    for the cost element (Transaction OKB9):
    Tools -> Customizing -> Setup menu -> Accounting -> Controlling -> Cost
    centers -> Actual postings -> Automatic account assignment.
    If this account assignment is implemented every posting to the
    particular inventory adjustment account will automatically receive the
    appropriate account assignment.

  • Field Selection Group for Batch Management

    Hi All,
    I do not want to make the field mandatory for Raw Material during creation of material master.
    I checked the fileld selection group for MARA-XCHPF for ROH material type, MM01 , it is optional.
    But when i try to create the Material Master for ROH it is showing mandatory field.
    Amit Shah

    Hi,
    Go to the OMS9, here enter the Field sel. group 75 for your MARA-XCHPF, enter and then check the ROH Field refrece, if it shows required then select either Optinal entry or Hide or Display as per the requirement.
    Check and revert.
    Hrishi

  • Selection groups for tables and header tables

    A couple of questions or rather observations around Selection Groups for tables and conversion objectu2026
    1) For tables that do not really have a date field, for instance table PDSNR, it appears that you cannot specify a selection group. Consequently, you have to transfer the table in its entirety. Is this something that can be modified via customizing?
    2) And what about the header tables, for example, X_ANLC, I have tried but not able to change the selection groups on these objects.
    Thanks!
    Harmeet

    Hi Harmeet.
    Since you mention you can only filter by date I am assuming you are using TDTIM.
    How would you want to filter PDSNR, for example? Would it want to filter all entries >= a given sequence number?
    The only way I know to do that is to work directly with the configuration tables. In your case you will need to use CNVMBTSEL* tables. Check how the standard selection groups are configured, and it should not be too difficult to follow the same logic and create your own selection groups.
    CNVMBTSELGRP                   MBT PCL Selection groups              (main table to create the selection group)
    CNVMBTSELMEMTYPE               MBT PCL Selection group member types  (main table to define members => fields for the selection group)
    CNVMBTSELGRPDEF                MBT PCL Selection group definition    (definition of the fields in that selection group)
    CNVMBTSELGRPVAL                MBT PCL Selection group values        (values for each field; you can use GE for >=)
    CNVMBTSELCLAUSE                MBT PCL Selection group clause        (should also be straightforward if you are using only one field)
    CNVMBTSELVAR                   MBT PCL Selection group variants     (configure the same variant for your selection group as for the others)
    CNVMBTSELREF                   MBT PCL Selection group reference     (assignment of selection group to conversion object)
    Hope this helps,
    Rui Dantas

  • Field selection group

    Dear Friends,
                      Can you please explain howthe field selection group,field reference works in Materials Management.and how this OMS9 screen works with this..
    Thanks&regards
    Eliaz

    Define whether a field is hidden or displayed, or whether an entry is mandatory or optional in material master maintenance by assigning the field to a field selection group in OMSR.
    Each field selection group has a number between 1 and 240.
    The values of the field selection groups have been preassigned as follows:
    001-110  Material master for industry 
    111-120  Reserved for customers (except where the values are already in use) 
    121-150  Material master for industry 
    151-210  Material master for retail 
    211-240  Reserved for customers 
    Create and maintain field references (OMS9).
    All the fields in the same fields group will have the same field selection option.
    (hide, display, required entry, or optional entry) 
    You can see where a field reference is used by choosing Where-used list.
    Define or change the field references as required (except for field references with the prefix SAP which must not be changed). New field references must begin with Y or Z.
    Changing the Field Selection Options for a Field Selection Group
    1. Specify the field selection group .
    2. Select the field selection option (hide, display, required entry, or optional entry) 
        for each field reference as required.
    3. Save.
    Creating a Field Reference
    1. Choose New entries.
    2. Specify a field reference beginning with Y or Z.
    3. Select the field selection option for each field selection group as required.
    4. Save.
    Changing a Field Reference
    1. Double-click the relevant field reference.
    2. Change the field selection option for each field selection group as required.
    3. Save.
    Define industry sectors and industry-sector-specific field selection in OMS3.
    Define plant-specific field selection and screen selection in OMSA.

  • Field Status Group for Special G/L Indicators

    Could you define different field status group for special G/L indicators? My problem is I am using two different special G/L indicators but their recon accounts are assigned with the same field status group. I used the same posting keys as well.  But when it comes to general posting, they have different screen numbers.  One SAPMF05A 303 and the other one is SAPMF05A 304.  How did this happen?

    Hi Noel,
    As you have defined Field Status Group for 2 different SPL GL Indicators then it will create 2 different screens only as it wont consider the reconciliation account.
    Regards
    andrew

  • Field References, Field Selection Group & Screen Sequence

    Dear Experts,
      Please whare are the importance of field References,  Field Selection group  & Screen Sequence? How do i use them?

    Hi,
    These are Object based (Like Material master, BOM, Routing etc..), so depending on how you want the screen layout and how you want the mandatory/optional field defination you can define it here.
    Regards,
    Prasobh

  • Field selection layout for MIRO

    Hi,
    I want to maintain the field selection layout for MIRO transaction (i.e i want to maintain mandatory/supress fileds for MIRO header data). Where i can manage......?
    Thanks & Regards
    Anilkumar Dalai

    Hi,
    Using the filed selection of the posting key, you can get the required effect.
    Goto OB41, select the posting key 31 and change the field status as required.
    Regards,

  • Material Master Field Selection Group

    Hi Experts
    In Material Master
    Under MRP2 View - Field # Prod Stor Loc, (MARC - LGPRO)  appears & Work Scheduling view, under Field Selection Group: 77
    Now I want to also add/extend  this field:  MARC - LGPRO  in Plant Storage 1/2 view. Possible ?
    What are the steps involved.
    Rgds
    RG

    Hi,
    Go to OMT3B, here select Entry "21" (Std ind.(short) tab pages) and double click on "Data screens" and here select entry "21 + 18" (General Plant Data / Storage 1) and then double click on "Subscreens" and maintain following entry;
    21     18     4     SAPLMGD1     2484

  • Field Status Group For MIRO

    Dear Friends
    Pls say me where we can get the field status group for Miro header level where i got a problem to make the business area manditory.
    Regards
    Vinay Bhaskar

    Hi vinay
    for busienss place we can make the field mandatory thorugh validations it is not possible through FSG
    Plz reward the point if it is useflull
    Regards

  • Screen sequance and Field selection group

    Dear All,
    Kindly help me by explaining the different steps( in detail)  to modify the screens of Media product and media issue according to my requirement using screen sequance (Reference screen) and field selection group ?

    Hi,
    These are Object based (Like Material master, BOM, Routing etc..), so depending on how you want the screen layout and how you want the mandatory/optional field defination you can define it here.
    Regards,
    Prasobh

  • Order of Precedence in Field Selection settings for Vendor Master

    Hi,
    There are three transactions which help define the list of mandatory, optional, suppressed and finally display only fields during vendor maintenance.
    These are,
    OMSG -> Define Account Groups and Field Selection( Vendor)
    OMFK -> Define Screen Layout Specific to Purchasing Organizations
    OMSX -> Define Transaction-Dependent Screen Layout.
    All these settings are independently maintained.
    In case of conflicting settings, say for example, Field Name 1 is made mandatory with tcode OMSG, but suppressed with tcode OMFK, how does the Vendor transaction(XK01, FK01, MK01) behave.
    How are these conflicts resolved ?. Is there any order of precedence.
    Regards,
    Jeron

    Hi,
    If both purchasing organizations have separate account group then you can very well achieve in customizing otherwise you need to control it in exit SAPMF02K
    Regards
    Melih

  • Field selection KEY for NBF.

    Dear Friends
    Iam cerating a STO document type with Field Selection Key NBF. and in Selection group, activated  the fields Tax Code, GR/IR control, GR/IR indicator
    Problem is while creating STO, Invoice tab is not appearing to enter Tax code
    ( VAT tax code created in ftxp). But doc type NB (Normal PO) Invoice tab is comming.
    Can any body help me out how to resolve this issue. Urgent.
    Thanks
    sitaram

    Dear ,
    I dont think that you'll able to get the invoice tab for STO in standard, since you're not buying from vendor, but the PO is supply from a supplying plant.

  • Field Selection error for movement type and G/L account

    I am currently experiencing a field selection error between movement type 601 and G/L account 7140000.  The problem field is 'Segment'.  This field is set to required for the G/L account, but it is hidden for the movement type 601. This inconsistency causes an error when posting the goods movement. According to business requirement the field must be required for the G/L account, therefore we must make this field optional for the movement type.
    However, in configuration the field segment does not appear for the movement type 601. Therefore it can not be changed to optional.
    Does anyone know a workaround other than making this field optional for the G/L account because the business requirement is to have this field as required?????
    Many Thanks

    Hi,
    On the Error message detail, system will guide you to the Configuration details for Field settings for Movement type & Account, please get in touch with your FI consultant, to make the Field selection for the account similr to that of your movement type, this is a very common issue.
    Regards
    Chandra Shekhar

  • Difference between field staus group for posting key and GL account

    Hi all,
    can anyone tell me what is the difference of usage for field status group in posting key and GL account as i notice the fileds are the same. during data entry, system will check both field status or how?
    thanks.

    Hi
    Both are to control the field status of the line item.
    But, the FSG of the Posting Key and the GL FSG status should not clash like below.
    Take 'Assignment' field as example :
    Posting key FS - Suppress & GL FS - Required    - will give you error message at the time of posting
    Posting key FS - Required & GL FS - Suppress    - will give you error message at the time of posting
    Otherthan the above, all other combination works
    VVR

Maybe you are looking for