Creation of Header and Sub headers in Hyperion data forms

Hello all,
I have a Hyperion Planning dataform with many account members in columns. I want to create header to differentiate each category of accounts.
A-Type
A001
A002
B-Type
B001
B002
B003
How can i do the header creation using XML code of the form extract.
I need to colour the background of the account members corresponding to the grouping.
Please revert for the query ASAP.

Hi,
About the header creation:-
Howz about adding a formula row instead of using xml code?
Like you can add a formula row and label it as A-Type.
As it is formula row, it will be greyed out.
Remember to validate the formula or else you might see "#error" in the rows.
Also you can use label only members for the scenario.
About the grouping by coding, it will try something by self and then can comment.
Hope this helps.
Regards
-SM

Similar Messages

Main heading and Sub Heading Requirment in ALV wih download to excel featur

Hello Everyone,
I have a very typical requirment in ALV . I want the output to be displayed as folows :
Category
Head1
Head2
Here the heading category is just a heading and no header and line item data. so hirearchal kind of ALV is of no use. and i cant write this was in TOP-OF-PAGE as i want to download this data to excel and if i write it in TOP-OF-PAGE the dwnload in excel is misaligned. I have been thorugh the various topics posted here and couldn't get a feasible solution. Please Help.

Hi,
This is not possible
Refer these links
Re: ALV query
Re: Multiple lines in alv column headings
If this solves ur problem reward points and close the thread

Security and/or filtering error in data form creation

Hi,
I am getting this error when I am trying to preview my data form.
This is the first time I am creating an application and data form in Hyperion.
The data form is multicurrency and plan type is Plan1.
Row:
Account members: Descendants(Account)
Column:
Year:Descendants(FY10)
Period:Descendants(YearTotal)
Page Dimension(s)
Entity:Descendants(Entity)
Scenario:Current
Version:BU Version_1
POV:
Currency:USD
Disabled all options in "Other options" and Not selected any business rukes.
When selecting preview data form I am getting below error:
Security and/or filtering has resulted in a required dimension not being represented on this data form
I have not selected any security/filter settings as of now. Please suggest whats causing this.
Thanks,

Hi Jake,
I did what you suggested,but I am still getting same error.
Here I would like to point out that. I have selected my application to support multicurrency, but 'HSP_RATES' does not come in Dimension selection drop down. I can see 'HSP_RATES' in Performance settings tab, but I cant see it in Dimensions tab or Evaluation order tab.
Is this causing problem? Should I add it manually?
Thanks,
Rajni.

Same field on Header and Item level with same data

Hi Experts,
I want enter value in WEB UI Header level Screen filed and the same value I have to see in same filed which has added to item level WEB UI Screen. Is Same field on Header and Item with data copying functionality supports by the CRM WEB UI?
Thanks in Advance
Edited by: sakthidharan acc on Jan 31, 2012 10:25 AM

Hi Leon,
can you please explain me how can i read the value of parent entity and make it appear at the item level?
Please help me in this regard
Its urgent.
Iam the beginner , so that is the reason iam asking many questions , please help me
Thanks and Regards,
Sak

Row and Column Formulas on a Data Form

I am creating a data form which has both row and column formulas. I would like the row formulas to show for some of the cells but it seems to default to the column formula.
How can I get my form to show the row formula result and not the column formula result?
Thank you!

Brian,
See this example:
http://htmldb.oracle.com/pls/otn/f?p=31517:160
There are also a coupleof others showing the same thing you want to achive.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Displaying columns of alv with Main Heading and Sub Heading

Hi friends.
I have certain fields in display of ALV.
Out of all fields(columns), I would have to display some columns with one Main Heading,Below it's being split in multiple rows.
I have data relevent to that multiple fields.
Let say ,
In first row it will show |Allowance |
In second |HRA |PA | OTHERS|
Thanks And Regards,
Amit Raut

Hi,
This is not possible
Refer these links
Re: ALV query
Re: Multiple lines in alv column headings
If this solves ur problem reward points and close the thread

Hyperion Data form issue

Hi,
I have created one dataform,in that data form for one particular member the data is aggregating with additional value(10)
But the same data form in another folder is working fine.
Can any one help me on this issue with a solution.
Thank You in advance
Ram

Hi Ram,
It cannot be the case .
The cell values of dimensions does not depend upon the folder, in which the data form is saved.
You need to recheck.
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

Need to know the name of DSO used to load Header and Item level info in LO

Hi friends ,
can some one tell me the name of DSO used to load Header and Item Level information from Data sources - 2lis_11_vahdr and 2lis_11_vaitm .
plz make it fast
Thanks

Hi ,
It is 0SD_O03 from 2lis_11_vahdr and 0SD_O01 & 0SD_O02 from 2lis_11_vaitm.
Bye
Dinesh

A question about UDA and Data-Forms

Hi all,
I have a couple of questions about UDA. I am using Hyperion Planning 11.1.1.3m, and when I desing a Data-Form I would need to use the UDA I asigned for the Entity dimension: is that posiible?
The other question is, when creating a Substiution Variable in Essbase I use the function @UDA (+dimension+, "MemberA"), but when using this variable in the Data-Form, it does nothing at all(in fact, it is been detected as an error). Why is that happening?
Thanks a lot

Use an attribute dimension to achieve what you are trying to do with UDA's in a data form. An attribute dimension will allow you to filter on members in the base dimension by a specific attribute the same way a UDA will. You can create the attribute dimension in the dimension editor in Planning by selecting the base dimension (Entity) and then select the custom attributes' button. Check the dba guide for a step-by-step approach.
With regards to the subvar, are you trying to add the function as a value of the subvar when you create it in EAS? If so, this is not allowed. What are you trying to do with the subvar on the form? Subvars are supported in data forms as part of the member selection for a dimension. For instance, you can set up a subvar called CurYear and set the value equal to FY11 for the Fiscal Year dimension. In the data form you can set the member selection for the Fiscal Year dimension to CurYear. When the user opens the form, the member FY11 is returned.

Hyperion Planning Data forms - conditionally/dynamically populate rows

I am building a budgeting data form which I am trying to invoke some dynamic capabilities so that it is either not one giant for, or one that users have to load to multiple pages through a drop-down, which they will essentially see as too cumbersome and not accept it as a good solution.
The basic relationship is one entity owns multiple cost centers. I am trying to find way that a user can select their entity in the header row drop-down, and from that have the data form only pull in their relevant cost centers into the rows, then repeat the set of accounts we have defined for each group.
Essentially i want it to provide something such as below (the spacing is not being recognized, but the accounts should all be justified into a row). The set of entities are pre-defined. No problem. As are the set of accounts. The issue is getting it to vary which cost centers are on the page to load to. There are thousands of cost center in the system, so again I can't list them all. Also there are hundreds of entities so I can't have a different form for each. Way too much maintenance. I have a few ideas on how to link the relationship between the entity and cost centers. Probably an attribute on each cost center to tell it which entity owns it. Or worst case an alternate rollup in the Cost center dimension, grouping them together under a CC-Entity parent. Problem again is how do I use this in the form? Open to any suggestions at all. Thanks
Mark
Sample
Entity (user selected)
Cost Center 1 Account 1
Account 2
Account 3
Cost Center 2 Account 1
Account 2
Account 3
Cost Center 3 Account 1
Account 2
Account 3

If you have data tied for the cost centers of entities 'supression' options should only bring the related cost centers.
You can put all entities and accounts in a single form , member level access will only let the users see what they have access to...
There may be other solutions from experts here..
Thanks

How Can I go Back to Leopad and sill keep all my data, e-mails etc.

Hi
I installed SL on Sept 3,2009. I'm a new Mac user so all I had was TM Backups which I still have. After SL install I have had lots of problems and a couple of days ago My system already failed and would not start. Called Apple, they said I had to re-install my OS. If that was the case I said I wanted to go back to Leopard, I was told use the leopard install disk and use disk utilities to locate the last Leopard TM backup and restore from that point and from there I was told I could recover all my Data, e-mails from Sept 3, 2009 the point of recovery at the time Sept 15/2009.
When I called back in after recoving to Sept 3/2009 for help in my data etc to Sept 15/2009 I was told I had been given bad advise, and that was not possible. So I have had to re-install SL and get back my data and e-mails etc to today. You can imagine how frustrating all this has been.
I'm now back on SL with all my Data, emails, etc but still experiencing many problems, and what I'm reading on this site makes me nervous that the worst is yet to come. My Tm seems to have double the amount of stuff and is a mixture of Leopard and SL backups. Is there a way of now going back to Leopard and then retrieving all my Data, form TM or from the other stuff I have saved? I have made copies of Mail, itunes, Documents, Safari, and I have all my pictures on my PC I have not added any since converting from my PC in early July. If I knew where they were I'd make a copy of them as well. I know there are a lot of smart Mac users out there so I'm hoping someone knows of a way of doing this, and can explain it it easy steps of a novice user. If there is someone from Apple out there reading this given the problems with SL I have had, and the bad advice on how to recover, some accurate, detailed instructions on how if possible I can get back to Leopard with all my data, it would sure be nice to hear from you.....
Dale

I rolled back a system from OS X 10.6.0 to OS X 10.5.8 via the Archive & Install (non-preserve) and it was successful. Now it didn't have any 3rd party applications installed. It just had the default OS bundled applications, iLife '09 and iWork '09. So that could have assisted in my success, I'm unsure how successful the process would have been if there was a lot of 3rd party framework modification. Although most of that would have been wiped clean in the Archive & Install, thus negating the problem.
Personally, I'd be more inclined to have you copy the contents of your Home folder (minus the Library) onto an external HD and manually reimport after a clean install of Leopard. The problem with that, however, is you'll lose Safari bookmarks, iCal data and Address Book data. So for something like you'd need to manually dig through the appropriate Library folders.
Are you near a Genius Bar? It might be worth visiting them and asking them for some assistance. I know when I worked there I was always outwardly accommodating when the issue was caused by inappropriate information that led you in the wrong direction from the start.

Sub Heading and Footer in BAM

Can any one tell me to add features like sub heading and Footer using BAM.
Is there anything like label or text box kind of thing.

Check out the Columnar Report to see if it meets your needs. It has Report Headers and Footers, and also Group Headers and Footers.
Regards, Stephen

Regarding Header And Footer in Data type Creation

Hi All,
Can Any One Please Send me One Screen Shot Developed with Header And Footer in the Data type Creation
I want to Know How to Create And where to create that in DT Creation
And Why Do we need Both of these in DT Creation
Regards
Vamsi

Hi,
Will u Please send One Screen With These Details, So that I Can Uderstand More
ID : [email protected]
Please send
Regards
Vamsi

Problem in Consistent Header and Footer with Sub Templates in BI publisher

Hi All,
I have recently started working with OBI and used Sub templates for getting Consistent Header and Footer in all of our reports. I did this in the following way
1. Created one template called HeaderFooter.rtf with Header and footer templates.
2. placed the file in web server and called in the main Template with
<?import: http://myserver.com:9704/xmlpserver/HeaderFooter.rtf?> I mean as static URL and it is working fine.
3. Now as a part of generalizing the server i have added HTTPSERVER property in xdo.cfg file which is located in
%BI_REPOSITORY%/Admin/Configuration.
4. I have checked this property by placing <?xdoxslt:getXDOProperties($_XDOCTX)? in my rtf file and HTTPSERVER property is showing same as that of static.
5. Now when i place <?import:http://{$HTTPSERVER}/HeaderFooter.rtf?> in my rtf it is ending with an error.
so can anyone please help me out in this regard?

Hi User XY,
you might want to ask this in the [url http://forums.oracle.com/forums/forum.jspa?forumID=245]BI Publisher Forum
brgds,
Peter
Blog: http://www.oracle-and-apex.com
ApexLib: http://apexlib.oracleapex.info
BuilderPlugin: http://builderplugin.oracleapex.info
Work: http://www.click-click.at

Write again sub-header and header for every start of new page in report

Hello experts,
In my report, I declared my line-count to be 0. I don't know if this is correct
but what I want to do is that for every new page, I want to write again my
sub-header and header. How do I do this? Thanks again guys!

Hi again,
1. CALL METHOD top->top_of_page
What does it do ?
Probably it prints the headings and sub-headings.
2. Now, again in start-of-selection,
we have written,
CALL METHOD main->display_subheader.
CALL METHOD main->display_header.
, so it becomes twice.
3. Ideally it could be like this :
<b>TOP-OF-PAGE.</b>
<b>CALL METHOD main->display_subheader.
CALL METHOD main->display_header.</b>
Remove
CALL METHOD main->display_subheader.
CALL METHOD main->display_header.
from start-of-selection.
regards,
amit m.

Creation of Header and Sub headers in Hyperion data forms

Similar Messages

Maybe you are looking for