Creation of Hierarchy Node for 0WBS_ELEMT

Hi All,
I am new to creating Hierarchy structures, my Master Data Hierarchy Loads Process chain is failing at 0WBS_ELEMT  with Error Message "Node ID 00019537 has not been included in the hierarchy". can any one please Explanin step by step for adding this node to 0WBS_ELEMT.
Thanks in Advance
Satya

Hi satya,
for adding the node go to the Infobject maintainance screengo to Hierarch tab- go to Maintain hierarchy. there select your hierachy and then change. it shows the available structure there u can add ur required node.and then execute the Process chain
Regards
SK

Similar Messages

  • How to provide a list of Hierarchy-nodes for selections?

    Hi specialists,
    some of our users often want to use some hierarchy-node-values from one report as filter of a 2nd report.
    For all non-hieararhy-values it is possible to do that using the clipboard.
    But there seems not to be a way to do the same with hierarchy-nodes.
    Is there any workaround to reach that target?
    Btw: I'm talking about users using the BEx 3.5 Analyzer.

    Hello,
    was this problem resolved?
    can you please temm me how you resolved this issue?
    Actually I also am having similar requirements in the project.
    Thank you.

  • Insert new hierarchy nodes for key figures

    Hi All,
    In BI 7.0. when you right click on the key figure folder , you get an option called " insert new hierarchy node". Can anyone please explain what is this feature for. Is is just for reporting purpose where you can drill down for a particular key figure for more clarity. Thanks in advance.
    Regards,
    Satish

    Hi,
    This is for reporting purpose.
    For example you have four key figures which consists the "TOTAL DEMAND".
    Suppose TOTAL DEMAND = Purchase Requistion + Planned Order + Purchase Order + Production Order
    We may provide hierarchy on TOTAL DEMAND, so that in display you may expand TOTAL DEMAND. When expanding TOTAL DEMAND it will show all four key figures with the total numbers in TOTAL DEMAND.
    You may refer follwoing document as well.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c6e6ed94-0501-0010-2886-b6944515cfd9
    I hope it will help.
    Thanks,
    S

  • Unable to see  hierarchy nodes for a hierarchy in Query designer

    For IO 0GL_ACCOUNT, we have many hierarchies defined.
    In the query designer when i am trying to restrict the 0GL_ACCOUNT with one of the hierarchy say Hier1 the corresponding hierarchy nodes should be displayed so that i can select any nodes of my choice and can restrict.
    Strangley instead of showing hierarchy nodes,it is showing" [ ]" with out any values.Checked in RSA1 ,the hierarchy with all nodes visible perfectly.No authorization settings created on any of these hierarchies.
    hierachy is in active state.
    Appreciate any suggestions on this.
    Regards,
    Swapna.G

    Before restricting you need to select hierarchy for the characterstic and tick the activate hierarchy display checkbox

  • Dynamically Selecting Hierarchy Nodes for each year

    Hi All,
    I have a strange query requirement. I am having a hierarchy which is divided based on region, quarter  and marketing campaign.
    Like below:
    APAC
             2010 Q1
                   Brand Marketing                      M09/2010-000074 (Node Technical Name)
                   Brand Advertising                   M09/2010-000075 
                   Events                                     M09/2010-000082
    EMEA
             2010 Q1
                   Brand Marketing                     M09/2010-000084
                   Brand Advertising                  M09/2010-000085
                   Events                                    M09/2010-000086 
    NA
        2010 Q1
                   Brand Marketing                     M09/2010-000098
                   Brand Advertising                  M09/2010-000099
                   Events                                    M09/2010-000106
    In my report output, I need to display the data in the below format. The Brand Marketing is cumilative of all regions (APAC, EMEA, NA).
                                                   Approved Amt
    Brand Marketing                    $2000
    Brand Advertising                 $1300
    Events                                   $8430   
    But my issue is next quarter the node technical names will change. So next quarter, my query should pick the nodes of current quarter based on node description.
    Right now what we are doing is hard coding in query the node technical names and modifying the query definition every quarter. After that download the query in Excel and apply excel formulae to cumulate the Brand Marketing, Brand Advertising, Events of all the regions. Then we will mail those files to Users.
    But we want to avoid that manual activity.
    Is there any way that we can enable query pick the marketing campaigns of current quarter and cumulate then for all regions
    Please let me know whether there is any alternative.
    Thanks

    Hi John,
    We are having a level based hierarchy, so the member key settings are disabled. Will they be helpful in case of level based hierarchy?
    Thanks,
    Sreekanth
    Edited by: JUPS on Sep 13, 2011 11:00 PM

  • How to display a Hierarchy node for level 2 without parent and description

    Hi,
    How to display a node at level two at the query the first node is CLASS where hierarchy is maintained and the second node is
    subclass where hierarchy is not maintained, Now I want to display the subclass in the row where it has to display its child node in one column & text in the other.

    Hi,
    I dont think this would be feasible to display in different columns.
    -Vikram

  • Use of filters and aggregations based on hierarchy nodes in an update rule

    Hello,
    I need to calculate some indicators from a ODS (BW 3.5) that contain raw data to another one that will contain indicators. These figures are the results of the use of filters and aggregations based on hierarchy nodes (for example: all sales accounts under a node).
    In fact, this is typically a query but I want to store these figures, so I need
    I understood I have to use a start routine. I never did that before.
    Could you provide me with easy-to-understand-for-newbies examples of:
    - filtering data based on the value of an infoobject (value must be empty, for example)
    - filtering and aggregation of data based on the appartenance to hierarchy nodes (all sales figures, ....)
    - aggregation of the key figures based on different characteristics after filtering of these
    Well, I am asking a lot ...
    Thank you very much
    Thomas

    Please go through the following link to learn more on aggregates:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e55aaca6-0301-0010-928e-af44060bda32
    Also go through the very detailed documentation:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/67efb9bb-0601-0010-f7a2-b582e94bcf8a
    Regards,
    Mahesh

  • Hierarchy node Variable: F4 Help - Not showing Master data values

    Hi,
    We're having some problems trying to display the F4 help of a hierarchy node selection variable, to show the master data values so that it would look more complete for the users during report execution.
    In the RSD1 setting for the info object, under 'Business Explorer' tab, the 'Query Execution Filter Val. Selectn' is set to 'Only Posted Values for Navigation'.
    I thot that we could overwrite this setting at the Query Designer level, but it does not seem to work.
    Even tho in the Query Designer, we have already specified the 'Filter Value Selection During Query Execution' to 'Values in Master Data Table', it does not seem to display the master data values.
    There is no difference in the F4 values being displayed for the hier node variable, before and after the change in Query Designer.
    Could anyone share some tips on other possible solutions to get a hier node selection variable's F4 help to show the master data values, without changing the RSD1 setting at the info object level please ?
    Thanks in advance for your help.
    Regards,
    Femmie.

    Hi,
    Could you please share the steps you have taken to fix the problem?
    We do have a similar problem and for some reason the newly added hierarchy node for 0Profit_ctr is not showing up in the variable selection screen F4 (input selection for query execution). However we can see this node when we display that hierarchy in RSA1. I did try applying the changes recommened by Jerome but unfortunately it didn't work.
    Any help on this would be greatly appreciated.
    Thanks,
    Krish

  • Run Time Error when trying to select hierarchy node

    Hy all,
    the situation is the following:
    i attempt to create a variable of type "hierarchy node" (for cost center cha) in my planning area, i used the replacement type "user defined value", check on "input allowed by user" and then i create the user entry, in selection condition i run match code and when i try to select a single cost center (not a hierarchy node) expanding the hierarchy tree the system goes dump with the following message:
    Runtime Errors         MESSAGE_TYPE_X
    Error analysis
    Short text of error message:
    Program is inconsistent -> see long text
    Technical information about the message:
    Diagnosis:
    An inconsistent program status has occurred. The program cannot be continued.
    System response:
    The system crashes.
    Procedure
             1.  Look in OSS for a note under the error message UPC099.
             2.  When you open a problem message, send the first pages of the
                 system crash message including the section 'Source code excerpt
                 ' with the message.
         Procedure for System Administration
        Message classe...... "UPC"
        Number.............. 099
    Selecting a hierarchy node (not a single cost center but a text node grouping more cost conter) this problem does not occur.
    I appreciate (and reward) any hints.
    Thanks in advance
    Fabio

    Hi,
    Go through the oss notes with error message UPC099
    Dump during hierarchy selection:<b>536694</b>
    Dump when reading a hierarchy with intervals :<b>423953</b>
    Regards-
    Siddhu
    Message was edited by: sidhartha

  • Hierarchy INT for 0GLACCEXT (Financial statement item)

    Dear Friends,
    I have a situation where i am modifying a standard BC query 0FIGL_VC1_Q0002 and i have to find equivalent nodes (equivalent to the standard SAP INT hierarchy) in my custom hierarchy for 0GLACCEXT (financial statement item). BW has a standard hierarchy INT for 0GLACCEXT (with nodes as numbers for example 3070000, 2030000 etc). With the custom hierarchy in my case how do i find the equivalent hierarchy nodes for this hierarchy while working with this query?
    Any help would be highly appreciated.
    Thanks
    Raj

    First of all, U cannot get balance sheet and income statement reports on DSO level... or even at cube level (0FIGL_C10)
    Balance sheet and income statement logic is manipulated in function Module (RS_BCT_FIGL_DATA_GET_VC10) that pulls data from 0FIGL_C10 to 0FIGL_V10... Thats the reason why SAP provided all Balance sheet and income statement reports on 0FIGL_V10.. And u can see 0GLACCEXCT in 0FIGL_V10, but not in 0FIGL_C10, which provides income statements at aggregation (totals) level, but not at granular level..
    Looks like u r trying for something (keeping 0GLACCEXT in 0FIGL_O10) which is not possible... If u want much detailed level of reports, u can create jump targets (RRI) from 0FIGL_V10 reports to 0FIGL_O10 reports (if u create any)

  • No applicable data : when selecting hierarchy node on 0GLACCEXT

    Hi,
    I using the ZCUBE (Copy of virtual cube 0FIGL_V10).
    I have data for the 0GLACCEXT hierarchy (standard hierarchy tech name: INT, and also for custom hierarchies)
    From the moment we use a selection in the rows on a node within the hierarchy of the financial statement item : 0GLACCEXT,  the result is No applicable data.
    We are using the standard calculated key figure Balance sheet Value.
    If i use the hierarchy (for INT) as a whole, we get data. If i restrict with hierarchy nodes for INT, then 'No Applicable Data'.
    for the other custom hierarchies, i'm getting same result, i.e. 'No Applicable Data'.
    Can somebody help with this issue.
    Thanks,
    V

    Hi
    Find out whethere data exists actually for the nade by executing the data for all the hierarchy nodes and find out whether data is coming when you execute for some other nodes
    Regards
    N Ganesh

  • Hierarchy node in query rows not showing values in report

    Hi sdn
    I'm taking hierarchy node on rows and some plan and actual values on columns but i'm unable to get values in the report for only plan values
    How did I reconcile the values whether that value is available in hierarchy or corresponding value's for plan data is available in the cube,pls give me clues
    rubane

    Hi,
    Could you please share the steps you have taken to fix the problem?
    We do have a similar problem and for some reason the newly added hierarchy node for 0Profit_ctr is not showing up in the variable selection screen F4 (input selection for query execution). However we can see this node when we display that hierarchy in RSA1. I did try applying the changes recommened by Jerome but unfortunately it didn't work.
    Any help on this would be greatly appreciated.
    Thanks,
    Krish

  • Reassignment of hierarchy nodes dynamically

    Hi Experts,
    I have a requirement wherein I need to re-assign the hierarchy node for an account based on Functional area.
    Currently, we load 0ACCOUNT info object with hierarchy defined in KDH3 transaction in R/3. Here, the account 650000000 is defined under local accounts node of the hierarchy. Hence, when we use the 0account infobject in BEx with hierarchy activated, all the records in transaction data with account no. 650000000 are aggregated under local accounts node.
    However, the user wants us to check the functional area for each of the record with 65000000 account and re-assign it to a different node of the hierarchy. For example, if the transaction data has account number 65000000 and functional area 400, then the record needs to be aggregated under a different node in hierarchy, say overhead costs. Similarly, if there is another record with account 650000000 and functional area 300, then the record needs to be aggregated under Sales & marketing.
    How do we handle such conditional assignment of hierarchy nodes?
    Regards,
    SS

    Hi,
    I really doubt if dynamic reassignment of hierarchy nodes is possible in BW, but could be wrong.
    Alternatives which you can consider
    a. A flat hierarchy modeled in the dimension of the cube i.e. higher levels of 0ACCOUNT can be filled during transformations based on functional area. Major disadvantage here is that any change to the hierarchy or assignment could require reloads depending on your requirement i.e. touch history data or not
    b.Customized Hierarchy created by combining the original hierarchy and the assignment details
    for eg 
    Leaf Node: 650000000_400 under parent Overhead Costs
    Leaf Node: 650000000_300,under parent Sales & Marketing
    Regards,
    Advait

  • Assign Segment Hierarchy Nodes to 0GLACCEXT_T011_HIER

    Dear All,
    In Below link
    http://help.sap.com/search/highlightContent.jsp
    i have assigned
    Segment Hierarchy Header
    But not able to do
    Segment Hierarchy Nodes
    please tell me the steps to assign Segment Hierarchy Nodes
    for DataSource: 0GLACCEXT_T011_HIER      BS/P&L item
    Please provide me your inputs.
    Regards
    SSMS

    Hi,
    In the change mode of the infosource, at the top you have the segment you will have to change the segment from the drop down from header to nodes and do the mapping and then activate the transfer rules.
    Assign points if useful
    regards
    Venkata Devaraj

  • Creation of  Variable for Hierarchy Node

    Greetings...fellow matez,
       I am using Characteristic "0PROFIT_CTR" : PROFIT CENTER
       Here, I created used SAP <b>Standard</b> variable 0N_PCTR (Profit Center/Profit Center Hierarchy)
       This meets my requirement of allowing User to Input the TOP MOST Hierarchy Node basically means my Hierarchy.
       Now, what I need is the ability of a User Input/Key In Variable to ask for a specific Node of my Hierarchy instead of just the <b>'main'</b> hierarchy
      Let me demonstrate with an example :-
      At the moment, I have a variable defined for "0PROFIT_CTR". So, I am able to choose "XXX GROUP" as my hierarchy.
      Now, under this "XXX Group" I have several Sub-Nodes like XXX-Functional Groups ; XXX-Business Units; XXX-Subsidaries.
      How can I create a variable which prompts for this Subnodes of my hierarchy ?

    Matez,
      Issue remains unresolved.
      What I need is a <b>Hierarchy - NODE</b> variable for my "Profit and Loss" Hierarhy
      But, when I use the variable option in the 'Selecting Variable for Hierarchy' scree, I only get to choose my Hierarchy instead of my Hierarchy Node.
      How can I created a variable of type Hierarchy-NODE instead of Hierarchy for my characteristic "0Account"
    Kindly advice matez!

Maybe you are looking for