Creation of Ibase for satellite systems in Solution Manager 4.0 SP13

Hello!
Can enybody help?
We are trying to creat Ibase for Satellite systems in solution landscape in SolMan system, using the automatic generation(TA SOLUTION_MANAGER) for specific solution.
After successfully generation we have only one iBase for one solman system only, but there are some systems in solution.
Does anyone know how to generate iBase for all systems in solution?

Hi,
There will be only one iBase for a solution.
Goto tcode IB52 and check. You will find all the systems assigned to your solution appear there.
regards,
Ram

Similar Messages

  • System Monitoring for Satellite System in Solution Manager

    Hi,
      I configured satellite system in solution manager through SMSY,and i created solution in dswp.I want to configure system monitoring through ccms agent,how to install ccms agent,how to configure system monitoring for satellite system in solution manager .Please guide me.
    Thanku

    Hi,
    In Solution manager I did below steps. :
    1)  Activated background dispatching in Rz21 (Client : 000).
    2)  Created CSMREG user (In RZ21)
    3)  Generated the configuration file for agent (CSMCONF).
    I down loaded the ccmagent_35-20001346.sar file.
    What are the steps i have to do in satellite system.
    Thanku

  • How to create Rfc for EP system in Solution manager

    Dear experts,
    I am doing ChaRM configuration for my EP system ( java only).
    I also configured CTS+ successfully but we want to integrate this with Chram in solman.
    I have done all configuration according to standard doc for ChaRM.
    But when creating project from solar_admin it is giving "   NO RFC for DEP system"
    so please suggest me how to create RFC for java system in Solution manager.
    thanks in advance
    dhiraj

    Hello,
    You need to setup an ABAP communication client and system, that's done through the TMS settings:
    For source system:
    - CTC                                              1
    - CTS_SYSTEM_TYPE                          JAVA  (others for a MDM system)
    - NON_ABAP_SYSTEM                          1
    - COMMUNICATION_SYSTEM:              (SAPSID of the ABAP communication system (e.g. the domain controller))
    - NON_ABAP_WBO_CLIENT                    (Client of the ABAP stack on which the Transport Organizer Web UI (CTS_BROWSER) is activated and will run.)
    - WBO_GET_REQ_STRATEGY                 TAGGED
    - WBO_REL_REQ_STRATEGY                 MANUAL
    For quality and production Java system (target systems):
    - CTC                                              1
    - CTS_SYSTEM_TYPE                          JAVA (others for a MDM system)
    - NON_ABAP_SYSTEM                         1
    - COMMUNICATION_SYSTEM:                 (SAPSID of the ABAP communication system (e.g. the domain controller))
    - DEPLOY_WEB_SERVICE                       CTSDEPLOY
    - DEPLOY_DATA_SHARE:
    When this is done correctly, you will see the fields ABAP communication system and client populated in SMSY.
    When ChaRM needs to operate on the non ABAP systems, it will take the RFCs for the communication system and client.
    Best regards,
    Miguel Ariñ

  • How to configure satellite system in Solution manager

    Hi,
    Please advise me how to configure satellite system in solution manager.
    Regards,
    Asif

    Hi,
    can you check this installation guides
    [ http://service.sap.com/solutionmanager][http://help.sap.com/saphelp_smehp1/helpdata/en/b7/07e4cf1a364a0482e29122c329b7d3/frameset.htm]
    Regards,
    Muralidhar

  • Monitoring a non-SAP satellite system in Solution Manager

    Hi Folks,
    I have two quick questions.
    1.) What is the proper procedure/tool for monitoring a non-NW system in Solution Manager? Should I be able to use sapccmsr and saposcol on these systems?
    2.)  What is the proper way to connect a non-NW system to the SLD? Should I be able to use saposol and sldreg for these?
    Background:
    - My Solution Manager system is a NW70 EHP1
    - Solution Manager Diagnostics is installed and monitoring my ABAP and Java systems
    - I have my CCMS agents registered back to my CEN for the ABAP and Java systems
    Satellite systems:
    - Multiple Wintel servers (both IA32 and x64) that are running;
      o standalone SQL server databases
      o BOE/BOBJ
      o BPC for Microsoft
    Section 4.8 of the Monitoring Setup Guide (CEN SAP Netweaver 7.0 SPS18) states that I should be able to monitor a standalone database.
    My confusion isu2026 in the absence of an SAP filesystem (kernel) and the standard SAP environment variables that get set during an install, how do I register the agents? The executables do not want to launch.
    Thank you,
    Bill

    Dear William,
    Monitoring of NON-SAP systems is not actually done on the solution manager system itself. The solution manager system gets its feed of alert information from the satellite, specifically CCMS. For SAP systems, alerts from CCMS are set up and activated by default. For Third-Party systems you have to be ablke to set up the interface to feed monitoring information from your non-SAP software to SAP's CCMS infrastructure.
    You can get more information on CCMS agents via the website at http://service.sap.com/monitoring.
    Go to "system Monitoring and Alert Management" > "Monitoring in Detail".
    I hope this information is helpful.
    Regards,
    Paul

  • Connection From Satellite System to Solution Manager for key users

    Hi All,
    Can anybody suggest which RFC connection/destination should be maintained in BCOS_CUST table under satellite system to connect to Solution Manager.
    1. SM_SSMCLNT010_TRUSTED
    2. SM_SSMCLNT010_BACK
    I don't want user to Login to solution manager while creating a support message. They should create a support messsage seamlessly from satellite system.
    Any help is greatly appreciated.
    Thanks...

    Thakur,
      Sorry for the cryptic answer back there - read it myself and it didn't make much sense to me either so here we go with the seamless way to allow users to create service messages.
      There are 2 ways to do this - 1 way is to use a connection like the 'BACK' connection but if you do this - all user tickets entered will have the username of the 'BACK' connection logon id as the message creator.  The other way is to use the trusted connection so the userid of the person logging the message is transfered with the created ticket.
      I will assume that you want to preserve the unique userid and use trusted connections. So here we go:
    Step 1 - Go into BCOS_CUST on the Satelite and put in your TRUSTED RFC Connection as the detination for the Service Messages - either use the one that Solman created when generating or make your own ABAP Trusted Connection.
    Step 2 - All users in Satelite and in Solution Manager need to have Authority Object S_RFCACL assigned to their userid's so they can use the Trusted RFC Connection (this is not in SAP_ALL or SAP_NEW).
    Step 3 - All users that will use this method of creating service tickets need both a userID and a BP with the respective system keys to allow them to enter tickets for those Satelites.
      That is all there is to it assuming that all issues with Trusted Connections have been worked through already (test this in SM59 by going to your 'TRUSTED' connection on the Satelite and execute the RemoteLogon button - you should be sent to the Solution Manager with out having to logon).
      If this answers your question, please set this message to answered.
    Edited by: David Milliken on Jan 25, 2008 1:55 AM

  • Activated SDCCN on Satellite System not Solution Manager

    I activated SDCCN on a satellite system instead of Solution Manager and need to find out how to treat Solution Manager system as the "master system" (basically point the satellite system back to the Solution Manager system). 
    Also, do I have to activate SDCCN on the Solution Manager system itself?  The documentation is vague here.

    1] In the satellite system go to tcode: SDCCN
    In the menu Goto -> Settings -> Task Specific
    In the settings for RFC-Destinations you can choose to which Solution Manager (master) the data will go.
    2] If i'm correct, you don't have to activate SDCCN on the Solution Manager. Just create a service in tcode: DSWP (Operations, Solution Monitoring, EarlyWatch report)
    (If you get an error session overdue, check answer on this Early Watch Alert Configuration))

  • EP 7 systems in Solution Manager 7 for EWA activation

    Dear Expert,
    Greetings from Partha.
    I need to include our EP 7 systems in Solution Manager 7 for EWA activation. Current lanscape scenario
    Solution Manger     7.00   Installed
    EP                          7.00   Installed
    No central SLD configured and all the system have local SLD.
    1. As per the installtion guide & SAP notes we need to install
    a> SM Diagnostics Agent & Wilo Introscope in Solution Manager (manging system).
    b> Diagnostics Agent in every manged system(s).
    For managing system we can download Diagnostics Agent installation DVDs from SAP Service Marketplace
    at: http://service.sap.com/swdc --> Download --> SAP Support Packages --> Entry by Application Group
    --> SAP Technology Components --> SAP SOLUTION MANAGER --> SAP SOLUTION MANAGER 7.0
    --> Entry by Component --> Agents for Managed systems --> DIAGNOSTICS AGENT 7.11
    --> <choose operating system of managed>
    Our Solution Manager 7 is already installed and @SPS 17. My question is
    1. Can we use the same file for SMD installtion in Solution Manger or we need to download it from some other area ?
    If it is different then kindly let me know what are the DVDs to be downloaded and from where?
    2. In our Managed System SMD installtion we have decided for
    --> Installation Strategy as Direct Solution Manager Registration
    But what strategy we should take for SMD installation on Sol Man 7 that is
    Local SLD (wrt Sol Man) Registration or Direct Solution Manager Registration
    3. What is the need for the SAP Host Agent Installattion ? Is it mandatory ?
    Help will be appreciated.
    Regards,
    Partha

    1. As per the installtion guide & SAP notes we need to install
    a> SM Diagnostics Agent & Wilo Introscope in Solution Manager (manging system).
    b> Diagnostics Agent in every manged system(s).
    For managing system we can download Diagnostics Agent installation DVDs from SAP Service Marketplace
    at: http://service.sap.com/swdc --> Download --> SAP Support Packages --> Entry by Application Group
    --> SAP Technology Components --> SAP SOLUTION MANAGER --> SAP SOLUTION MANAGER 7.0
    --> Entry by Component --> Agents for Managed systems --> DIAGNOSTICS AGENT 7.11
    --> <choose operating system of managed>
    Our Solution Manager 7 is already installed and @SPS 17. My question is
    1. Can we use the same file for SMD installtion in Solution Manger or we need to download it from some other area ?
    If it is different then kindly let me know what are the DVDs to be downloaded and from where?
    Check the pdf attached in note 1234387 - Inst. 7.1 EhP1 - Diagnostics Agent installation
    If you have SP17, you must follow note 1357812 and install Diagnostics Agent 7.01 SR1
    2. In our Managed System SMD installtion we have decided for
    --> Installation Strategy as Direct Solution Manager Registration
    But what strategy we should take for SMD installation on Sol Man 7 that is
    Local SLD (wrt Sol Man) Registration or Direct Solution Manager Registration
    It doesn't matter what strategy you'll decide. You could decide Direct Solution Manager registration
    3. What is the need for the SAP Host Agent Installattion ? Is it mandatory ?
    As you have solution Manager SP17, you can't install Saphostagent 7.11 and for this reason you can't use SAphostagent.
    Agent 7.01 => No Saphostagent
    Agent 7.11 => Must install saphostagent
    Agent 7.20 => Already have SAPhostagent installed

  • Add sap R/3 enterprise system in solution manager SLD

    Dear All
    Required solution manager configuration documents.
    We have DEV QAS and PRD server on SAP mySAP ERP 4.7 ( SAP R/3 Enterprise )
    And during the installation of solution manager I select u201CConfigure a Local SLD u201C
    Which steps I follows to connect or configure my sap system with solution manager ( SLD ) then I will configure central monitoring, TMS management, Helpdesk etc
    Who to Configure SLD Bridge ( in SLD Server ) ?
    in which system Run Transaction RZ70 ( In SAP R/3 Enterprise ) ?
    and how to Verify that my system is connected and working fine With SLD
    Please help me regarding u201C configuration solution manager u201C
    Regards
    Shahid

    Hi
    Visit for step by step details of Standard Configuration of Basic Settings
    http://service.sap.com/rkt-solman-->SAP Solution Manager 7.0->Technology Consultants & System Administrators->Technical Configuration->just drill out there you can find lot of simulator how to install and configure solution manager
    http://www.wilsonmar.com/sap_solution_manager.htm
    /people/federico.babelis2/blog/2006/04/14/service-desk-configuration-guide-for-dummies
    Regards
    Uday

  • How to add EP(DEV and QAS and PRD systems in solution manager)

    Dear Gurus,
    I want to include EP dev and qality and prodution systems in solution manager .
    While installation of EP(only ASJAVA it is not having ASABAP) i selected solution manager as a Central SLD. But i deleted the systems in solution manger and recreated it again. I created all the systems and datatabae and logical components but in maintenane optimizer it is showing only production system but it is not showing development and quality systems in maintenance optimizer.
    How to see developmnet and quality systems in maintenace optimizer.
    Same thing for ECC also.
    ECC dev and quality systems installed in the same server.
    In maintenace optimizer it is showing only dev sysetm it not showing quality sysetm.
    Can any body help this probelm.
    Thanks & Regards
    Rao.

    I think you need to adjust your filter settings in the initial screen of MOPZ.
    It's in the right top corner.

  • Add BI System in Solution manager

    Hi All,
    I need to add BI DEV, BI PRD Systems to solution manager. As per my understanding first i need to create logical systems, after wards i have to add this system in SMSY.
    I will be glad if some one can post ur suggestions and procedure to add this
    Thanks

    Hi,
    this is same for all the system. only you have to select appropriate product instance
    please refer this screenshots here [SMSY Set Up|http://www.way2sap.com/sap-article/adding-a-sap-system-to-smsy-of-solution-manager-1907/]
    get the other set up guides on service.sap.com -> release and upgrade info -> installation and upgrade guide -> SAP components -> SAP Solution Manager -> Operation guides.
    Thanks
    Jansi

  • How to add a system into Solution Manager directory.

    Hi!
    Can anybody tell me how to add a system into Solution Manager directory before generating license key for ECC installation .
    Also,
    How to connect the XI in same box with SolMan and ECC in defferent server to SolMan 3.2 .
    I am going to install SolMan and than XI in and box and after that ECC in a seperate box.
    AM I right?
    regards,
    Pratip Bhattacharyya

    Hi Bratip Bhattacharyya,
    SolMan 3.2 needs SLD only for automatic data gathering of the sap landscape; you can choose between SLD and LIS in transaction SMSY_SETUP (which simply uses the TMS-domain controllers for information gathering).
    XI needs SLD, but XI needs also a netweaver04 (s) system (Abap WAS 6.40). SolMan 3.2 isn't a netweaver04 system (Abap WAS 6.20). So you have to install XI as an own central instance (Abap + Java) on the same windows server, if you like. In this case you have to install for XI an own SLD. Different SLDs can create bridges between themselves. Please look at the SLD configuration guide (quicklink /netweaver -> installation guides).
    But don't ask me how to install two sap systems on one server on windows (on Linux it's easy I have done so); basically it will have an own SID and own "service" numbers (which means own tcp port numbers).
    If you can't dedicate to XI an own server, it's only a question of hardware sizing. For the different combinations of netweaver components you should study the master guide for netweawer.
    Bye
    Message was edited by: Riccardo Escher

  • Monitor Systems From Solution Manager 4.0

    Hi Dear Gurus,
    I have recently Instaled SOLMAN 4.0 on windows with Mysql. I have configured the Maintainence optimizer and now its working fiine.
    From my organization requirement they want to monitor ERP and BW systems from solution manager.
    Can any one please tell me how to start regarding this.
    And one more question is i am just wondering Central  User Admin is different installation or we have to configure SOLMAN 4.0 to use CUA.
    Many thanks for your time.
    Kind Regards,
    Vamsi.

    Hi,
    You first need to Setup landscape and create RFCs
    [Data Collection|https://websmp109.sap-ag.de/~sapidb/011000358700004860052004E.sim]
    [Create Systems|https://websmp109.sap-ag.de/~sapidb/011000358700000894082006E.sim]
    [Create RFCs|https://websmp109.sap-ag.de/~sapidb/011000358700002912202006E.sim]
    [Assign Logical Components|https://websmp109.sap-ag.de/~sapidb/011000358700002912242006E.sim]
    Then Create Solution,
    Then Setup Solution Monitoring
    [Setup|https://websmp109.sap-ag.de/~sapidb/011000358700006936062005E.sim]
    [Monitoring Graphic|https://websmp109.sap-ag.de/~sapidb/011000358700006939872005E.sim]
    [Exhaustive very good tutor|https://websmp109.sap-ag.de/~sapidb/011000358700005479192006E.sim]
    This will solve your problem.
    Feel free to revert back.
    --Ragu
    Edited by: Raguraman C on Jan 16, 2008 4:31 AM

  • An advanced solution for sending email from Solution Manager (or CRM)

    Hi all,
    did anyone use blog "An advanced solution for sending email from Solution Manager (or CRM)"
    <a href="/people/emmanuele.prudenzano/blog/2006/08/03/an-advanced-solution-for-sending-email-from-solution-manager-or-crm:///people/emmanuele.prudenzano/blog/2006/08/03/an-advanced-solution-for-sending-email-from-solution-manager-or-crm
    I´ve got some problems:
    I tried to implement your solution in our SAP system. I´m new to ABAP and so it´s a little bit try and error for me.
    I´ve got some errors:
    In method EXEC_SMART_FORM_WITH_TEXT (from note 935670) :
    - method string_to_soli does not exist. There is a method xstring_to_solix.
    When I change to method xstring_to_solix
    - "L_STRING" is not type-compatibly to "IP_XSTRING".
    In method ZSM_ATTACH_PHIO_DOCU:
    - field DOCUMENT is unknown
    Regadrs
    Andy

    Hi all,
    did anyone use blog "An advanced solution for sending email from Solution Manager (or CRM)"
    <a href="/people/emmanuele.prudenzano/blog/2006/08/03/an-advanced-solution-for-sending-email-from-solution-manager-or-crm:///people/emmanuele.prudenzano/blog/2006/08/03/an-advanced-solution-for-sending-email-from-solution-manager-or-crm
    I´ve got some problems:
    I tried to implement your solution in our SAP system. I´m new to ABAP and so it´s a little bit try and error for me.
    I´ve got some errors:
    In method EXEC_SMART_FORM_WITH_TEXT (from note 935670) :
    - method string_to_soli does not exist. There is a method xstring_to_solix.
    When I change to method xstring_to_solix
    - "L_STRING" is not type-compatibly to "IP_XSTRING".
    In method ZSM_ATTACH_PHIO_DOCU:
    - field DOCUMENT is unknown
    Regadrs
    Andy

  • Error while Regestring Enterprise portal system in solution manager

    Dear Experts ,
    recently we  installed enterprise portal and now we required to register ep system in solution manager  but i tried more and also checke in sdn & other sites but system is showing errors (system does not exist) i think i done mistakes in this process so ..
    please give me steps for registering enterprise portel system in solution manager
    Regards

    Hello Swathi,
    First get the EP system registered in the SLD connected to the Solution Manager system.
    Then via Landscape Fetch job fetch the system data in SMSY. The system should automatically get created.
    What are the errors that you are facing ?
    Regards
    Amit

Maybe you are looking for